共查询到20条相似文献，搜索用时 31 毫秒
1.
波浪与起伏水平板防波堤相互作用数值模拟 总被引：1，自引：1，他引：0
利用自主研发的基于紧致插值曲线CIP(constrained interpolation profile)方法的数学模型,开展规则波与起伏水平板防波堤相互作用的数值模拟研究。模型在笛卡尔直角坐标下建立,以CIP方法为流场基本求解器,分步求解Navier-Stokes方程,利用高精度的流体体积类型的THINC/SW (tangent of hyperbola for interface capturing with slope weighting)方法重构自由液面,采用浸入边界IBM(immersed boundary method)方法处理波浪与起伏板防波堤的耦合作用问题,通过动量源项造波方法模拟波浪的产生。重点关注波浪的浅水变形和板两端涡旋脱落的非线性现象,分析不同潜深、波要素下的板周围流场分布、板的运动响应和波浪的反透射系数。结果表明:起伏水平板主要通过能量反射、板上浅水变形和板两端的涡脱落消能,能有效减小板后波高,具有作为防波堤的可行性。 相似文献
2.
Numerical simulation of dam-break wave, as an imitation of tsunami hydraulic bore, with a hump of different slopes is performed in this paper using an in-house code, named a Constrained Interpolation Profile (CIP)-based model. The model is built on a Cartesian grid system with the Navier Stokes equations using a CIP method for the flow solver, and employs an immersed boundary method (IBM) for the treatment of solid body boundary. A more accurate interface capturing scheme, the Tangent of hyperbola for interface capturing/Slope weighting (THINC/SW) scheme, is adopted as the interface capturing method. Then, the CIP-based model is applied to simulate the dam break flow problem in a bumpy channel. Considerable attention is paid to the spilling type reflected bore, the following spilling type wave breaking, free surface profiles and water level variations over time. Computations are compared with available experimental data and other numerical results quantitatively and qualitatively. Further investigation is conducted to analyze the influence of variable slopes on the flow features of the tsunami-like bore. 相似文献
3.
Unsteady nonlinear wave motions on the free surface in shallow water and over slopes of various geometries are numerically simulated using a finite difference method in rectangular grid system. Two-dimensional Navier–Stokes equations and the continuity equation are used for the computations. Irregular leg lengths and stars are employed near the boundaries of body and free surface to satisfy the boundary conditions. Also, the free surface which consists of markers or segments is determined every time step with the satisfaction of kinematic and dynamic free surface conditions. Moreover, marker-density method is also adopted to allow plunging jets impinging on the free surface. Either linear or Stokes wave theory is employed for the generation of waves on the inflow boundary. For the simulation of wave breaking phenomena, the computations are carried out with various wave periods and sea bottom slopes in surf zone. The results are compared with other existing computational and experimental results. Agreement between the experimental data and the computation results is good. 相似文献
4.
Green water loads on moored or sailing ships occur when an incoming wave significantly exceeds the freeboard and water runs onto the deck. In this paper, a Navier–Stokes solver with a free surface capturing scheme (i.e. the VOF model; [Hirt and Nichols, 1981]) is used to numerically model green water loads on a moored FPSO exposed to head sea waves. Two cases are investigated: first, green water on a fixed vessel has been analysed, where resulting waterheight on deck, and impact pressure on a deck mounted structure have been computed. These results have been compared to experimental data obtained by [Greco, 2001] and show very favourable agreement. Second, a full green water incident, including vessel motions has been modelled. In these computations, the vertical motion has been modelled by the use of transfer functions for heave and pitch, but the rotational contribution from the pitch motion has been neglected. The computed water height on deck has been compared to the experimental data obtained by [Buchner, 1995a] and it also shows very good agreement. The modelling in the second case was performed in both 2-D and 3-D with very similar results, which indicates that 3-D effects are not dominant. 相似文献
5.
Freak waves are extreme and unexpected surface waves with huge wave heights that may lead to severe damage to ships and offshore structures. However, few researches have been conducted to investigate the impact underneath fixed horizontal decks caused by freak waves. To study these phenomena, a 2-D numerical wave tank is built in which nonlinear freak waves based on the Peregrine breather solution are generated. As a validation, a regular-wave-induced underneath impact is simulated and compared to the existing experimental measurements. Then the nonlinear freak-wave-induced impact is investigate with different values of deck clearance above the mean free surface. In addition, a comparative simulation of a “large” regular wave based on the 2nd-order Stokes wave theory with the same crest height and wave length of the nonlinear freak wave is carried out to reveal the unique features of the nonlinear freak-wave-induced impact. By applying a fluid–structure interaction (FSI) algorithm in which the bottom deck and front side wall are simplified as Euler beams in 2-D and discretized by the finite element method (FEM), the hydroelastic effects are considered during the impact event. The vertical force acting underneath the bottom deck, the transversal force acting on the front side wall, the structural displacements of the elastic deck and wall are analyzed and discussed respectively, from which meaningful conclusions are drawn. 相似文献
6.
A statistical model is developed to predict wave overtopping volume and rate of extreme waves on a fixed deck. The probability density function for the volume and rate of overtopping water are formulated based on the truncated Weibull distribution with the assumption of local sinusoidal profile for small amplitude waves. Sensitivity to the wave nonlinearity parameter and deck clearance is discussed. The statistical model is compared to laboratory data of the instantaneous free surface elevation measured in front of a fixed deck, and overtopping volume and overtopping rate measured at the leading edge of the deck. The statistical theory compared well with the measured exceedance probability seaward of the deck. The model prediction of the exceedance probability of deck overtopping gave qualitatively good agreement for large overtopping values. 相似文献
7.
The performance of interFoam (a widely used solver within OpenFOAM package) in simulating the propagation of water waves has been reported to be sensitive to the temporal and spatial resolution. To facilitate more accurate simulations, a numerical wave tank is built based on a Navier–Stokes model, which employs the VPM (volume-average/point-value multi-moment) scheme as the fluid solver and the THINC/QQ method (THINC method with quadratic surface representation and Gaussian quadrature) for the free-surface capturing. Simulations of regular waves in an intermediate water depth are conducted and the results are assessed via comparing with the analytical solutions. The performance of the present model and interFoam solver in simulating the wave propagation is systematically compared in this work. The results clearly demonstrate that compared with interFoam solver, the present model significantly improves the dissipation properties of the propagating wave, where the waveforms as well as the velocity distribution can be substantially maintained while the waves propagating over long distances even with large time steps and coarse grids. It is also shown that the present model requires much less computation time to reach a given error level in comparison with interFoam solver. 相似文献
8.
Numerical simulation of non-linear regular and focused waves in an infinite water-depth 总被引：3，自引：0，他引：3
Inviscid three-dimensional free surface wave motions are simulated using a novel quadratic higher order boundary element model (HOBEM) based on potential theory for irrotational, incompressible fluid flow in an infinite water-depth. The free surface boundary conditions are fully non-linear. Based on the use of images, a channel Green function is developed and applied to the present model so that two lateral surfaces of an infinite-depth wave tank can be excluded from the calculation domain. In order to generate incident waves and dissipate outgoing waves, a non-reflective wave generator, composed of a series of vertically aligned point sources in the computational domain, is used in conjunction with upstream and downstream damping layers. Numerical experiments are carried out, with linear and fully non-linear, regular and focused waves. It can be seen from the results that the present approach is effective in generating a specified wave profile in an infinite water-depth without reflection at the open boundaries, and fully non-linear numerical simulations compare well with theoretical solutions. The present numerical technique is aimed at efficient modelling of the non-linear wave interactions with ocean structures in deep water. 相似文献
9.
Nonlinear behaviors of a free-floating body in waves were experimentally investigated in the present study. The experiments were carried out for 6 different wave heights and 6 different wave periods to cover a relatively wide range of wave nonlinearities. A charge-coupled device (CCD) camera was used to capture the real-time motion of the floating body. The measurement data show that the sway, heave and roll motions of the floating body are all harmonic oscillations while the equilibrium position of the sway motion drifts in the wave direction. The drift speed is proportional to wave steepness when the size of the floating body is comparable to the wavelength, while it is proportional to the square of wave steepness when the floating body is relatively small. In addition, the drift motion leads to a slightly longer oscillation period of the floating body than the wave period of nonlinear wave and the discrepancy increases with the increment of wave steepness. 相似文献
10.
Freak waves are generated based on the mechanism of wave focusing in a 2D numerical wave tank. To set up the nonlinear numerical wave tank, the Boundary Element Method is used to solve potential flow equations incorporated with fully nonlinear free surface boundary conditions. The nonlinear properties of freak waves, such as high frequency components and wave profile asymmetry, are discussed. The kinematic data, which can be useful for the evaluation of the wave forces exerted on structures to avoid underestimation of linear predictions, are obtained, and discussed, from the simulated results of freak waves. 相似文献
11.
The high-speed impact between a body and water is an important practical problem, whether due to wave impact on a structural deck or wall, or due to a moving body such as a ship or aircraft hitting water. The very high pressures exerted are difficult to predict and the role of air may be significant. In this paper, numerical simulations are undertaken to investigate the impact of a rigid horizontal plate onto a wave crest and, in the limit, onto a flat water surface. A two-phase incompressible–compressible smoothed particle hydrodynamics (SPH) method for water and air, respectively, is applied where the water phase imposes kinematics on the air phase at the air–water interface and the air phase imposes pressures on the water at the interface. Results are compared with experimental measurements undertaken using a drop rig positioned over a wave flume so that a horizontal plate impacts the water surface in free flight. Numerical predictions of impact pressure are quite accurate; air is shown to have a significant cushioning effect for impact on to flat water and this reduces for waves as the ratio of wave height to wavelength increases. 相似文献
12.
In this paper, a superposition of two periodic wave profiles in a finite water depth was investigated. This paper is focused on the improvement of a wave profile on the linear superposition of two waves. This improvement was realized by introducing an iterative method, which was based on a fixed point approach. Application of the fixed point approach to the wave superposition made it possible to obtain a wave profile of wave–wave interaction. The improved result of the wave profile was in good agreement with that of the nonlinear perturbation solution of the second order. It was interesting that the improved result revealed the higher-order nonlinear frequencies for two interacting Stokes waves while Dalzell's solution by a perturbation method could not predict them. 相似文献
13.
14.
An efficient focusing model for generation of freak waves 总被引：1，自引：1，他引：0
Based on the Longuet-Higgins wave model theory, the previews studies have shown that freak waves can be generated in finite space and time successfully. However, as to generating high nonlinear freak waves, the simulation results will be unrealistic. Therefore, a modified phase modulation method for simulating high nonlinear freak waves was developed. The surface elevations of some wave components at certain time and place are positive by modulating the corresponding random initial phases, then the total surface elevation at the focused point is enhanced and furthermore a freak wave event is generated. The new method can not only make the freak wave occur at certain time and place, but also make the simulated wave surface time series satisfy statistical properties of the realistic sea state and keep identical with the target wave spectrum. This numerical approach is of good precision and high efficiency by the comparisons of the simulated freak waves and the recorded freak waves. 相似文献
15.
16.
Vessels operating in shallow waters require careful observation of the finite-depth effect. In present study, a Rankine source method that includes the shallow water effect and double body steady flow effect is developed in frequency domain. In order to verify present numerical methods, two experiments were carried out respectively to measure the wave loads and free motions for ship advancing with forward speed in head regular waves. Numerical results are systematically compared with experiments and other solutions using the double body basis flow approach, the Neumann-Kelvin approach with simplified m-terms, and linearized free surface boundary conditions with double-body m-terms. Furthermore, the influence of water depths on added mass and damping coefficients, wave excitation forces, motions and unsteady wave patterns are deeply investigated. It is found that finite-depth effect is important and unsteady wave pattern in shallow water is dependent on both of the Brard number τ and depth Froude number Fh. 相似文献
17.
18.
基于高阶边界元的三维数值波浪港池--波浪破碎的模拟 总被引：5，自引：1，他引：4
在势流理论的框架内,采用高阶边界元方法和混合欧拉-拉格朗日法,实现了对三维波浪破碎过程的数值模拟.数值模型使用可调节时间步长的基于二阶显式泰勒展开的混合欧拉-拉格郎日时间步进来求解自由表面的演化过程.在所使用的边界元方法中,采用16节点三次滑移四边形单元来表示,这种单元在单元内具有高阶的精度同时在单元之间具有良好的连续性.给出了孤立波的传播和周期性非线性波浪沿缓坡传播的计算结果,表明数值模型具有良好的稳定性. 相似文献
19.
Nonlinear Finite Element Analysis of Ocean Cables 总被引：1，自引：1，他引：1
Nam-ⅡKIM Sang-SooJEON Moon-YoungKIM 《中国海洋工程》2004,18(4):537-550
This study has focused on developing numerical procedures for the dynamic nonlinear analysis of cable structures subjected to wave forces and ground motions in the ocean. A geometrically nonlinear finite element procedure using the isoparamnetrie curved cable element based on the Lagrangian folmulation is briefly summarized. A simple and accurate method to determine the initial equilibrium state of cable systems associated with self-weights, buoyancy and the motion of end points is presented using the load incremental method combined with penalty method. Also the Newmark method is used for dynamic nonlinear analysis of ocean cables. Numerical examples are presented to validate the present numerical method. 相似文献
20.
Waves generated by vertical seafloor movements are simulated by use of a fully nonlinear two-dimensional numerical wave tank. In the souree region, the seafloor lifts to a designated height by a generation function. The numerical tests show that the linear theory is only valid for estimating the wave behaviors induced by the seafloor movements with a small amplitude, and the fully nonlinear numerical model should be adopted in the simulation of the wave generation by the large amplitude seafloor movements. Without the background surface waves, many numerical tests on the stable maximum elevations η0^max are carried out by beth the linear theory and the fully nonlinear model. The results of two models are compared and analyzed. For the fully nonlinear model, the influences of the amplitudes and the horizontal lengths on η^max are stronger than that of the characteristic duration times. Furthermore, results reveal that there are significant differences be- tween the linear theory and the fully nonlinear model. When the influences of the background surface waves are considered, the corresponding numerical analyses reveal that with the fully nonlinear model the η0^max near-linearly varies with the wave amplitudes of the surface waves, and the η0^max has significant dependences on the wave lengths and the wave phases of the surface waves. In addition, the differences between the linear theory and the fully nonlinear model are still obvious, and these differences are significantly affected by the wave parameters of the background surface waves, such as the wave amplitude, the wave length and the wave phase. 相似文献