首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
天然气水合物广泛分布于陆地冻土带和深海地层,资源潜力巨大,其中Ⅱ类水合物藏占有重要地位。为加强对Ⅱ类水合物藏开采规律的认识,结合实际水合物藏参数,使用数值模拟方法研究了热水驱替开采Ⅱ类水合物藏的动态规律,并与降压法的开采效果进行了对比分析。结果表明:①热水驱替开采Ⅱ类水合物藏时,产气速率和分解气速率首先快速上升,然后以较快速度下降至趋于相对稳定;累产气和累分解气上升较快;气体采出程度和水合物分解程度均处于较高水平(>60%)。②热水驱替对Ⅱ类水合藏的开采具有一定的适应性,与降压法开采相比,热水驱替方式下储层水合物的分解更彻底,气体采出程度、水合物分解程度也更优,但具有较低的累积气水比,产水量较大。  相似文献   

2.
TOUGH+HYDRATE 水合物模型参数敏感性分析   总被引：1，自引：0，他引：1  
刘丽强  徐军  李雁  夏真  苏钰  苏洁 《海洋科学》2014,38(6):52-59
运用国际上较为先进的水合物开采模拟软件TOUGH+HYDRATE(T+H)对我国南海水合物藏竖井降压开采假设进行数值模拟,采用LH-OAT全局敏感性分析方法,对模型中19个普遍应用的水合物层参数进行了敏感性分析,并对参数敏感性从重到轻进行了极敏感、敏感、一般敏感和不敏感4个水平的等级划分。研究表明:T+H的参数敏感性随评价目标、时间和空间位置的不同而不同。对CH4气体累积产量有显著影响的参数有:Stone指数(n)、固相渗透率缩减指数(PRE)、绝对渗透率(Permeabilities)、流体临界饱和度(CMPS)。随着模拟时间的增加,参数对水合物饱和度的整体敏感度提高。在空间分布上,随着与井壁水平距离的增加,所有参数对水合物饱和度的敏感度降低。敏感参数的确定对提高模型的准确性有重大意义。在实际应用中要有针对性地调节参数,以获得最优效果。  相似文献   

3.
为了研究天然气水合物降压开采过程的储层应力及其稳定性，运用线性多孔弹性力学和岩石力学知识，考虑水合物储层原始应力、孔隙压力、渗流附加应力及降压开采水合物过程中水合物饱和度的变化，建立了降压开采天然气水合物储层的力学模型，结合墨西哥湾某处水合物藏的基本参数，对降压开采水合物储层应力变化和开采过程的储层稳定性进行研究。结果表明：井底压力是影响水合物储层应力变化的关键因素之一；渗流附加应力在一定程度上减小了储层的应力；水合物分解储层应力发生变化，储层应力在井壁处的波动最大，井壁处是整个储层所受轴向偏应力最大的位置，因此井壁处是优先发生剪切破坏的位置；为了储层的稳定性，降压开采水合物生产压差应小于2.19 MPa。  相似文献   

4.
In 2009, the Gulf of Mexico (GOM) Gas Hydrates Joint-Industry-Project (JIP) Leg II drilling program confirmed that gas hydrate occurs at high saturations within reservoir-quality sands in the GOM. A comprehensive logging-while-drilling dataset was collected from seven wells at three sites, including two wells at the Walker Ridge 313 site. By constraining the saturations and thicknesses of hydrate-bearing sands using logging-while-drilling data, two-dimensional (2D), cylindrical, r-z and three-dimensional (3D) reservoir models were simulated. The gas hydrate occurrences inferred from seismic analysis are used to delineate the areal extent of the 3D reservoir models. Numerical simulations of gas production from the Walker Ridge reservoirs were conducted using the depressurization method at a constant bottomhole pressure. Results of these simulations indicate that these hydrate deposits are readily produced, owing to high intrinsic reservoir-quality and their proximity to the base of hydrate stability. The elevated in situ reservoir temperatures contribute to high (5–40 MMscf/day) predicted production rates. The production rates obtained from the 2D and 3D models are in close agreement. To evaluate the effect of spatial dimensions, the 2D reservoir domains were simulated at two outer radii. The results showed increased potential for formation of secondary hydrate and appearance of lag time for production rates as reservoir size increases. Similar phenomena were observed in the 3D reservoir models. The results also suggest that interbedded gas hydrate accumulations might be preferable targets for gas production in comparison with massive deposits. Hydrate in such accumulations can be readily dissociated due to heat supply from surrounding hydrate-free zones. Special cases were considered to evaluate the effect of overburden and underburden permeability on production. The obtained data show that production can be significantly degraded in comparison with a case using impermeable boundaries. The main reason for the reduced productivity is water influx from the surrounding strata; a secondary cause is gas escape into the overburden. The results dictate that in order to reliably estimate production potential, permeability of the surroundings has to be included in a model.  相似文献   

5.
海洋天然气水合物开采方法及产量分析   总被引：2，自引：0，他引：2  
海洋天然气水合物的巨大储量刺激了世界各国能源部门努力研究如何从天然气水合物储层生产天然气。根据水合物形成的条件，只有当水合物处在其相平衡条件以外，水合物才能分解。因此，水合物的开采方法只能为热熔法、抑制剂刺激法、减压法和地面分解法。为了对天然气水合物储层中气体的生产有个定量的评估，本文以水合物开采井为例，运用数学方法推导了水合物井中气体的产生量。结果表明，在天然气水合物储层中，天然气释放量是井内水合物分解温度、压力及水合物层气体渗透性的敏感函数。该函数可以用于天然气水合物井气体开采量的计算及对水合物储层可开采性评价。  相似文献   

6.
Hydro-thermo-chemo and mechanically coupled processes determine hydrate morphology and control gas production from hydrate-bearing sediments. Force balance, together with mass and energy conservation analyses anchored in published data provide robust asymptotic solutions that reflect governing processes in hydrate systems. Results demonstrate that hydrate segregation in clayey sediments results in a two-material system whereby hydrate lenses are surrounded by hydrate-free water-saturated clay. Hydrate saturation can reach ≈2% by concentrating the excess dissolved gas in the pore water and ≈20% from metabolizable carbon. Higher hydrate saturations are often found in natural sediments and imply methane transport by advection or diffusion processes. Hydrate dissociation is a strongly endothermic event; the available latent heat in a reservoir can sustain significant hydrate dissociation without triggering ice formation during depressurization. The volume of hydrate expands 2-to-4 times upon dissociation or CO2CH4 replacement. Volume expansion can be controlled to maintain lenses open and to create new open mode discontinuities that favor gas recovery. Pore size is the most critical sediment parameter for hydrate formation and gas recovery and is controlled by the smallest grains in a sediment. Therefore any characterization must carefully consider the amount of fines and their associated mineralogy.  相似文献   

7.
Natural gas hydrate, as a potential energy resource, deposits in permafrost and marine sediment with large quantities. The current exploitation methods include depressurization, thermal stimulation, and inhibitor injection. However, many issues have to be resolved before the commercial production. In the present study, a 2-D axisymmetric simulator for gas production from hydrate reservoirs is developed. The simulator includes equations of conductive and convective heat transfer, kinetic of hydrate decomposition, and multiphase flow. These equations are discretized based on the finite difference method and are solved with the fully implicit simultaneous solution method. The process of laboratory-scale hydrate decomposition by depressurization is simulated. For different surrounding temperatures and outlet pressures, time evolutions of gas and water generations during hydrate dissociation are evaluated, and variations of temperature, pressure, and multiphase fluid flow conditions are analyzed. The results suggest that the rate of heat transfer plays an important role in the process. Furthermore, high surrounding temperature and low outlet valve pressure may increase the rate of hydrate dissociation with insignificant impact on final cumulative gas volume.  相似文献   

8.
Natural gas hydrates are considered as a strategic unconventional clean hydrocarbon resource in the energy sector. This paper analyzes the spatiotemporal effectiveness of the depressurization technique for producing methane gas from an unconfined Class 4 clayey setting in the Krishna Godavari (KG) basin, east coast of India. The production potential of a well by depressurization based on the borehole-based pumping technique is modeled using the newly developed spatiotemporal numerical tool, IndHyd 1.0, built using MATLAB for a constant borehole ΔP. The model is aided by TOUGH+HYDRATE reservoir production simulation software. From the IndHyd 1.0 simulation results, it is identified that a vertical well in the location NGHP-01-10D could have a lateral well reach, longevity, and a cumulative methane gas production potential of 145?m, 1.2 years, and ～0.6 billion m3, respectively. For the formation with a postdissociation permeability of 200 mD, a possible scenario in the fractured settings, the well reach, longevity, and gas production potential could be 340?m, 3.6 years, and ～9 billion m3, respectively.  相似文献   

9.
According to the preliminary geological data of gas hydrate bearing-sediments (GHBS) at site GMGS3-W19 in the third Chinese expedition to drill gas hydrates in 2015, a production model using three different recovery pressures was established to assess the production feasibility from both production potential and geomechanical response. The simulation results show that for this special Class 1 deposit, it is a little hard for gas production rate to reach the commercial extraction rate because the degree of hydrate dissociation is limited due to the low reservoir permeability and the permeable burdens. However, the free gas accumulating in the lower part of the GHBS can significantly increase gas-to-water ratio. It also generates many secondary hydrates in the GHBS at the same time. Decreasing the well pressure can be beneficial to gas recovery, but the recovery increase is not obvious. In term of geomechanical response of the reservoir during the gas recovery, the permeable burdens are conducive to reduction of the sediment deformation, though they don't facilitate the gas recovery rate. In addition, significant stress concentration is observed in the upper and lower edges of GHBS around the borehole during depressurization because of high pressure gradient, and the greater the well pressure drop, the more obvious the phenomenon. Yield failures and sand production easily take place in the edges. Therefore, in order to achieve the purpose of safe, efficient and long-term gas production, a balance between the production pressure and reservoir stability should be reached at the hydrate site. The production pressure difference and sand production must be carefully controlled and the high stress concentration zones need strengthening or sand control treatment during gas production. Besides, the sensitivity analyses show that the hydrate saturation heterogeneity can affect the production potential and geomechanical response to some extent, especially the water extraction rate and the effective stress distribution and evolution. Increasing GHBS and its underlying free gas formation permeabilities can enhance the gas production potential, but it probably introduces geomechanical risks to gas recovery operations.  相似文献   

10.
Targeting the methane hydrate (MH) bearing units C and D at the Mount Elbert prospect on the Alaska North Slope, four MDT (Modular Dynamic Formation Tester) tests were conducted in February 2007. The C2 MDT test was selected for history matching simulation in the MH Simulator Code Comparison Study. Through history matching simulation, the physical and chemical properties of the unit C were adjusted, which suggested the most likely reservoir properties of this unit. Based on these properties thus tuned, the numerical models replicating “Mount Elbert C2 zone like reservoir”, “PBU L-Pad like reservoir” and “PBU L-Pad down dip like reservoir” were constructed. The long term production performances of wells in these reservoirs were then forecasted assuming the MH dissociation and production by the methods of depressurization, combination of depressurization and wellbore heating, and hot water huff and puff. The predicted cumulative gas production ranges from 2.16 × 106 m3/well to 8.22 × 108 m3/well depending mainly on the initial temperature of the reservoir and on the production method.This paper describes the details of modeling and history matching simulation. This paper also presents the results of the examinations on the effects of reservoir properties on MH dissociation and production performances under the application of the depressurization and thermal methods.  相似文献   

11.
Natural gas hydrate, as a potential energy resource, deposits in permafrost and marine sediment with large quantities. The current exploitation methods include depressurization, thermal stimulation, and inhibitor injection. However, many issues have to be resolved before the commercial production. In the present study, a 2-D axisymmetric simulator for gas production from hydrate reservoirs is developed. The simulator includes equations of conductive and convective heat transfer, kinetic of hydrate decomposi...  相似文献   

12.
During the Indian National Gas Hydrate Program (NGHP) Expedition 01, a series of well logs were acquired at several sites across the Krishna–Godavari (KG) Basin. Electrical resistivity logs were used for gas hydrate saturation estimates using Archie’s method. The measured in situ pore-water salinity, seafloor temperature and geothermal gradients were used to determine the baseline pore-water resistivity. In the absence of core data, Arp’s law was used to estimate in situ pore-water resistivity. Uncertainties in the Archie’s approach are related to the calibration of Archie coefficient (a), cementation factor (m) and saturation exponent (n) values. We also have estimated gas hydrate saturation from sonic P-wave velocity logs considering the gas hydrate in-frame effective medium rock-physics model. Uncertainties in the effective medium modeling stem from the choice of mineral assemblage used in the model. In both methods we assume that gas hydrate forms in sediment pore space. Combined observations from these analyses show that gas hydrate saturations are relatively low (<5% of the pore space) at the sites of the KG Basin. However, several intervals of increased saturations were observed e.g. at Site NGHP-01-03 (Sh = 15–20%, in two zones between 168 and 198 mbsf), Site NGHP-01-05 (Sh = 35–38% in two discrete zone between 70 and 90 mbsf), and Site NGHP-01-07 shows the gas hydrate saturation more than 25% in two zones between 75 and 155 mbsf. A total of 10 drill sites and associated log data, regional occurrences of bottom-simulating reflectors from 2D and 3D seismic data, and thermal modeling of the gas hydrate stability zone, were used to estimate the total amount of gas hydrate within the KG Basin. Average gas hydrate saturations for the entire gas hydrate stability zone (seafloor to base of gas hydrate stability), sediment porosities, and statistically derived extreme values for these parameters were defined from the logs. The total area considered based on the BSR seismic data covers ∼720 km2. Using the statistical ranges in all parameters involved in the calculation, the total amount of gas from gas hydrate in the KG Basin study area varies from a minimum of ∼5.7 trillion-cubic feet (TCF) to ∼32.1 TCF.  相似文献   

13.
Class 1 gas hydrate accumulations are characterized by a permeable hydrate-bearing interval overlying a permeable interval with mobile gas, sandwiched between two impermeable intervals. Depressurization-induced dissociation is currently the favored technology for producing gas from Class 1 gas hydrate accumulations. The depressurization production technology requires heat transfer from the surrounding environment to sustain dissociation as the temperature drops toward the hydrate equilibrium point and leaves the reservoir void of gas hydrate. Production of gas hydrate accumulations by exchanging carbon dioxide with methane in the clathrate structure has been demonstrated in laboratory experiments and proposed as a field-scale technology. The carbon dioxide exchange technology has the potential for yielding higher production rates and mechanically stabilizing the reservoir by maintaining hydrate saturations. We used numerical simulation to investigate the advantages and disadvantages of using carbon dioxide injection to enhance the production of methane from Class 1 gas hydrate accumulations. Numerical simulations in this study were primarily concerned with the mechanisms and approaches of carbon dioxide injection to investigate whether methane production could be enhanced through this approach. To avoid excessive simulation execution times, a five-spot well pattern with a 500-m well spacing was approximated using a two-dimensional domain having well boundaries on the vertical sides and impermeable boundaries on the horizontal sides. Impermeable over- and under burden were included to account for heat transfer into the production interval. Simulation results indicate that low injection pressures can be used to reduce secondary hydrate formation and that direct contact of injected carbon dioxide with the methane hydrate present in the formation is limited due to bypass through the higher permeability gas zone.  相似文献   

14.
海洋天然气水合物稳定带气烟囱结构中存在被水合物充填的裂隙, 表明在自然条件下沉积物中曾发生过流体压裂以及相关的流体流动和水合物形成。在水合物稳定带内实施人为的流体压裂工程, 并联合其他方法(如降压或注热)进行水合物开采, 有望提高开采效率。水合物稳定带内, 无论是自然条件下发生的流体压裂过程, 还是人为实施的流体压裂工程, 都存在水合物反应和沉积物裂隙变形之间的耦合响应。当前, 已有不少数值程序对水合物反应与沉积物弹塑性变形的耦合过程进行了定量研究, 但尚没有数值程序能够计算水合物反应和离散裂隙变形之间的耦合过程。文章将TOUGH+Hydrate程序、IC-FERST和Solidity两者的耦合程序进行了进一步耦合, 为水合物稳定带内的流体压裂计算提供了一种耦合计算方法, 同时通过一个算例初步验证了该耦合计算方法的可行性。验证结果表明, 该耦合计算方法经进一步改进后有望应用于定量研究水合物稳定带内的裂隙变形和水合物反应过程。  相似文献   

15.
The huge amount of methane hydrate deposits identified in deep marine sediments is considered as the new resource for future energy. Since carbonates are one of the major components of marine sediments, in the present study, an investigation has been made to study methane hydrate stability and kinetics in the presence of CaCO3 and MgCO3. Effect of the presence of carbonates on the solubility of methane in the system has also been examined as it directly affects the hydrate formation process. It has been observed that in presence of CaCO3 and MgCO3, the hydrate formation is inhibited. Comparative studies have also been done in the presence of artificial seawater to consider the effect of presence of different salts. Mole consumption of methane gas during hydrate formation in different carbonate samples was measured using real gas equation and found to be minimum in CaCO3 in seawater sample due to the combined effect of the presence of CaCO3 and different salts of seawater. An increase in nucleation and induction time was also observed demonstrating the inhibition of hydrate formation in the presence of these components. Further, the decrease in hydrate formation rate also confirmed the inhibition effect of CaCO3 and MgCO3 on hydrate formation.  相似文献   

16.
The CO2CRC Otway Project is the first demonstration scale project for geosequestration of CO2 in Australia. The storage site is located in the depleted Waarre reservoir of the Naylor gas field contained within a single fault block, in the onshore Otway Basin of Victoria. During 2009, approximately 65,000 tonnes of a mixture of CO2 and CH4 (∼80%/20%) was injected into the reservoir, accumulating at the top of the structure.To fully understand the pressure response of a depleted reservoir to CO2 injection all of the mechanisms that may impact the reservoir pressure, prior to injection, must be identified. In the case of the Otway Project there were five possible mechanisms with potential for impacting the Naylor Field pressure. These are (1) the rate of recovery due to gas production from the Naylor Field; (2) depletion from the nearby Boggy Creek CO2 production field; (3) depletion from the nearby Buttress CO2 Field, the source of the CO2 for injection into the Naylor Field; (4) depletion from the regional Waarre Formation reservoir which has been producing gas (and water) since 1986; and (5) hydraulic potentiometric disequilibrium via connection to other active aquifers.These mechanisms were examined through a regional conceptual hydrodynamic model as part of the pre-injection site characterisation. The reservoir pressure measured at the Naylor-1 well, prior to production, was lower than predicted by the hydrodynamic model. Examination of regional drawdown demonstrated that the reservoir is experiencing pressure decline which could have extended to the Naylor Field at this time.Ongoing monitoring of the Naylor-1 well, prior to injection, showed the depleted reservoir recovering faster than predicted by the reservoir simulation model matched to the production history. Connecting the target fault block to the regional aquifer using a dual aquifer model supported by the hydrodynamic model significantly improved the predicted recovery of the depleted reservoir.  相似文献   

17.
Fossil methane from the large and dynamic marine gas hydrate reservoir has the potential to influence oceanic and atmospheric carbon pools. However, natural radiocarbon (14C) measurements of gas hydrate methane have been extremely limited, and their use as a source and process indicator has not yet been systematically established. In this study, gas hydrate-bound and dissolved methane recovered from six geologically and geographically distinct high-gas-flux cold seeps was found to be 98 to 100% fossil based on its 14C content. Given this prevalence of fossil methane and the small contribution of gas hydrate (≤ 1%) to the present-day atmospheric methane flux, non-fossil contributions of gas hydrate methane to the atmosphere are not likely to be quantitatively significant. This conclusion is consistent with contemporary atmospheric methane budget calculations.In combination with δ13C- and δD-methane measurements, we also determine the extent to which the low, but detectable, amounts of 14C (~ 1–2% modern carbon, pMC) in methane from two cold seeps might reflect in situ production from near-seafloor sediment organic carbon (SOC). A 14C mass balance approach using fossil methane and 14C-enriched SOC suggests that as much as 8 to 29% of hydrate-associated methane carbon may originate from SOC contained within the upper 6 m of sediment. These findings validate the assumption of a predominantly fossil carbon source for marine gas hydrate, but also indicate that structural gas hydrate from at least certain cold seeps contains a component of methane produced during decomposition of non-fossil organic matter in near-surface sediment.  相似文献   

18.
Two newly developed coring devices, the Multi-Autoclave-Corer and the Dynamic Autoclave Piston Corer were deployed in shallow gas hydrate-bearing sediments in the northern Gulf of Mexico during research cruise SO174 (Oct–Nov 2003). For the first time, they enable the retrieval of near-surface sediment cores under ambient pressure. This enables the determination of in situ methane concentrations and amounts of gas hydrate in sediment depths where bottom water temperature and pressure changes most strongly influence gas/hydrate relationships. At seep sites of GC185 (Bush Hill) and the newly discovered sites at GC415, we determined the volume of low-weight hydrocarbons (C1 through C5) from nine pressurized cores via controlled degassing. The resulting in situ methane concentrations vary by two orders of magnitudes between 0.031 and 0.985 mol kg− 1 pore water below the zone of sulfate depletion. This includes dissolved, free, and hydrate-bound CH4. Combined with results from conventional cores, this establishes a variability of methane concentrations in close proximity to seep sites of five orders of magnitude. In total four out of nine pressure cores had CH4 concentrations above equilibrium with gas hydrates. Two of them contain gas hydrate volumes of 15% (GC185) and 18% (GC415) of pore space. The measurements prove that the highest methane concentrations are not necessarily related to the highest advection rates. Brine advection inhibits gas hydrate stability a few centimeters below the sediment surface at the depth of anaerobic oxidation of methane and thus inhibits the storage of enhanced methane volumes. Here, computerized tomography (CT) of the pressure cores detected small amounts of free gas. This finding has major implications for methane distribution, possible consumption, and escape into the bottom water in fluid flow systems related to halokinesis.  相似文献   

19.
  相似文献   

20.
《Marine and Petroleum Geology》2012,29(10):1768-1778
During the Indian National Gas Hydrate Program (NGHP) Expedition 01, a series of well logs were acquired at several sites across the Krishna–Godavari (KG) Basin. Electrical resistivity logs were used for gas hydrate saturation estimates using Archie’s method. The measured in situ pore-water salinity, seafloor temperature and geothermal gradients were used to determine the baseline pore-water resistivity. In the absence of core data, Arp’s law was used to estimate in situ pore-water resistivity. Uncertainties in the Archie’s approach are related to the calibration of Archie coefficient (a), cementation factor (m) and saturation exponent (n) values. We also have estimated gas hydrate saturation from sonic P-wave velocity logs considering the gas hydrate in-frame effective medium rock-physics model. Uncertainties in the effective medium modeling stem from the choice of mineral assemblage used in the model. In both methods we assume that gas hydrate forms in sediment pore space. Combined observations from these analyses show that gas hydrate saturations are relatively low (<5% of the pore space) at the sites of the KG Basin. However, several intervals of increased saturations were observed e.g. at Site NGHP-01-03 (Sh = 15–20%, in two zones between 168 and 198 mbsf), Site NGHP-01-05 (Sh = 35–38% in two discrete zone between 70 and 90 mbsf), and Site NGHP-01-07 shows the gas hydrate saturation more than 25% in two zones between 75 and 155 mbsf. A total of 10 drill sites and associated log data, regional occurrences of bottom-simulating reflectors from 2D and 3D seismic data, and thermal modeling of the gas hydrate stability zone, were used to estimate the total amount of gas hydrate within the KG Basin. Average gas hydrate saturations for the entire gas hydrate stability zone (seafloor to base of gas hydrate stability), sediment porosities, and statistically derived extreme values for these parameters were defined from the logs. The total area considered based on the BSR seismic data covers ∼720 km2. Using the statistical ranges in all parameters involved in the calculation, the total amount of gas from gas hydrate in the KG Basin study area varies from a minimum of ∼5.7 trillion-cubic feet (TCF) to ∼32.1 TCF.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号