共查询到19条相似文献，搜索用时 109 毫秒
1.
深海钢悬链立管触地点动力响应分析 总被引：1，自引：0，他引：1
研究深海钢悬链立管(SCR)在海洋环境载荷作用下的动力响应.利用非线性弹簧模拟立管与海床触地点的耦合模型,通过模态分析得到钢悬链立管的动力特性参数;时域动力响应分析获得不同工况下触地点及典型部位的位移、弯矩和应力时程.比较分析表明:浮体垂荡运动对触地点的应力状态影响较大,触地点附近存在钢悬链立管动力响应过程中的位移极值点和弯矩极值点.所提方法为触地点区域模拟分析提供了新思路,给出的分析结论对钢悬链立管设计有一定借鉴意义. 相似文献
2.
采用弹性基础梁模型,模拟钢悬链线立管(steel catenary riser,SCR)与海床土的相互作用,推导了弹性基础梁模型的有限元公式,基于该模型编制了钢悬链式立管的动力分析程序,在此基础上,分析了在浮体运动及环境载荷作用下,钢悬链线立管触地点区域的动力响应特征,并与弹簧支撑模型进行了比较。研究表明,弹性基础梁模型对单元长度的敏感性较低,可采用较长的单元,从而减少计算量。 相似文献
3.
在时域内分析深水钢悬链立管在平台运动和波流载荷共同作用下的非线性动力响应;采用雨流计数法处理立管节点应力的时间历程,选用DoE.E型S-N曲线分析立管在单一海况和平台运动联合作用下的疲劳损伤;将各方向含概率分布的疲劳损伤进行叠加,得到立管整体的全方向疲劳损伤及疲劳寿命。平台的运动为六自由度的运动预报数据,波流载荷由某海域实际的波浪统计数据采用Morison公式计算所得。计算结果表明钢悬链立管疲劳寿命的极值点分别位于悬挂点附近和触地点附近,对立管疲劳寿命极值点各方向疲劳损伤分布情况进行了分析。所提方法为钢悬链立管疲劳分析提供了新思路,给出的结论对钢悬链立管设计分析有一定借鉴意义。 相似文献
4.
为了有效地考虑浮体慢漂运动对钢悬链线立管疲劳损伤的影响,提出了波频和慢漂运动组合作用下钢悬链线立管疲劳损伤简化计算的位置组合叠加法。其核心是:基于浮体慢漂运动概率分布选取若干典型慢漂位置,进行波频运动作用下钢悬链线立管动力响应分析;根据钢悬链线立管运动位置变化特征,截取若干慢漂位置对应的波频应力时程叠加到慢漂应力时程上,得到波频和慢漂运动的组合应力时程;编写基于雨流计数法的MATLAB程序处理立管各节点应力,采用海水环境下Do E.E型S-N曲线和Palmgren-Miner累积损伤准则计算立管各节点疲劳损伤。应用位置组合叠加法对某海域500 m水深的立管进行了疲劳分析,并与全耦合法、权重组合叠加法以及波频和慢漂疲劳损伤简单相加法的结果进行了对比,结果表明该方法具有较高的精度和效率。此外,进行了区域设定系数、波浪高度、波浪周期和土壤表面剪切强度等参数对组合作用下立管疲劳损伤的敏感性分析。 相似文献
5.
与海床的相互作用是钢悬链线立管特有的性质,是传统立管发展中不曾遇到的问题,也是控制立管疲劳寿命的主要因素,特别是触地区出现的峰值弯曲应力和管土接触模型的不确定,成为SCR触地区研究的难点。由于立管与海床的作用机理非常复杂,因此管土相互作用模型的提出大多是建立在模型试验的基础上。通过对国内外深水SCR触地区管土相互作用试验研究案例的分析,简要介绍了SCR触地点的动态响应取决于一系列参数,如海床土刚度、加载状况、立管的提升速度、土的重塑时间和土吸力等,并设计了一套三维管-土相互作用的试验装置,能够为深水钢悬链线立管触地区管-土相互作用的试验研究提供参考。 相似文献
6.
平台运动激励下钢悬链式立管触地点动态分析 总被引：1，自引：1，他引：0
平台运动和管土相互作用是引起钢悬链式立管(Steel Catenary Riser,SCR)触地点动态响应和疲劳损伤的关键因素。基于竖向土抗力-埋深曲线和侧向库伦摩擦双线模型模拟SCR触地区管土作用,并考虑竖向海床刚度的退化,研究平台三维运动激励下SCR触地区的动态响应与疲劳寿命,相对于简单的单向运动激励和仅考虑竖向管土作用,更符合工程实际。计算结果表明:①三维管土作用下,平台垂荡运动对立管触地区的影响最大,纵荡运动次之,横荡的影响最小;②平台三维运动的耦合,在一定程度上可降低立管触地区的动力响应和疲劳损伤,若仅考虑垂荡运动,结果偏于保守;③非线性海床模型相对于线弹性海床,引起的立管触地区的应力幅值、位移幅值显著增加,虽然贯入位移较小,但土抗力较大,选用线弹性海床的计算误差较大。平台运动和海床强度对SCR触地点动态响应和疲劳损伤的影响较大,因此在SCR响应分析与设计中,准确选择海床模型和平台运动方式,对于预测立管的疲劳寿命具有重要意义。 相似文献
7.
由于良好的疲劳特性,自由站立式立管(FSHR)正广泛应用于深海油气田的开发当中。首先根据设计参数建立FSHR详细的有限元模型,然后利用谱分析方法对FSHR进行总体运动疲劳分析,以确定FSHR总体设计参数是否满足运动疲劳要求。最后对工作于相同环境下的钢悬链立管(SCR)进行总体运动疲劳分析,探讨哪种立管系统的疲劳性能更为优良。计算结果表明FSHR系统中刚性主管最大运动疲劳损伤出现在刚性主管顶部,FSHR总体设计参数满足规范要求;FSHR总体运动疲劳寿命要远大于SCR,体现了FSHR系统对浮体运动与刚性主管之间具有良好的解耦作用。 相似文献
8.
钢悬链线立管(SCR)在上部浮体运动和波流荷载激励下会与海床土相互作用,传统的线性海床模型假定荷载位移关系是线性的,没有考虑管土相互作用的非线性过程和海床土吸力的影响,本文基于大挠度柔性索理论的钢悬链式立管动力分析程序CABLE3D,将立管受到线性海床的弹性支撑力扩充为立管受到的海床垂向力,充分考虑管土非线性相互作用,并考虑海床土吸力对钢悬链式立管触地点区域的影响,开发出新的动力分析程序。程序采用非线性有限元方法对控制方程进行离散,时域内采用Newmark-β法,求解给定上部浮体运动条件下,SCR的动力响应,通过算例对线性刚度海床和非线性刚度海床进行对比,并分析了不同海床刚度对SCR触地点动力响应和疲劳损伤的影响。结果表明:非线性海床刚度模型比线性海床刚度模型更接近真实的管土作用过程;在非线性海床刚度模型下,海床土刚度越大,SCR触地点区域垂向位移响应越小,应力幅值越大,疲劳损伤越严重。 相似文献
9.
基于钢悬链式立管(SCR)动力分析程序CABLE3D,采用大挠度柔性梁理论建立SCR的运动方程,将线性海床模型扩展为考虑海床土吸力的非线性海床模型,采用非线性有限元方法对控制方程进行离散,时域内积分采用Newmark-β法,开发出新的计算程序。通过算例分析上部浮体垂荡运动幅值、海床土剪切强度、海床土剪切强度梯度对SCR触地点区域动力响应和疲劳损伤的影响。分析结果表明:SCR触地点区域动力响应和疲劳损伤对上部浮体垂荡运动幅值和海床土剪切强度的变化较为敏感,疲劳损伤在触地点区域最大,远大于悬垂段和流线段,在设计过程中应采取一定的加强措施。 相似文献
10.
考虑钢悬链线立管大变形的特性以及内流的影响,利用Kane方法和拉格朗日应变理论建立钢悬链线立管的二维动力学模型。将顶部浮体的激励简化为一个沿顺流向的周期作用力施加于立管顶部,采用平均加速度法求解立管的动力响应。探讨顶部浮体不同激励频率下立管的非线性动力响应以及内流流速的大小对管道共振响应幅值的影响。 相似文献
11.
Steel catenary risers (SCR) connect seabed pipelines and flow lines to floating structures used for oil and gas production in deep waters. Waves and currents induce motions of the structure and the risers. The repeated motions of the risers at the touchdown zone in turn induce loads on the seabed soil and might eventually cause fatigue damage to the risers. The analysis of riser fatigue damage is heavily dependent on the soil model. Soil behaviour at touchdown zone such as soil remoulding, stiffness degradation and deformation of the seabed at the touchdown zone further complicate the accurate assessment of riser fatigue damage, which is currently not appropriately quantified in existing design methods. This paper presents centrifuge model tests simulating the repeated vertical movement of a length of riser on clay seabed with increasing undrained shear strength with depth. During the tests, the pipe was subject to cyclic motion over fixed vertical displacement amplitude from an invert embedment of 0.5-3.5 pipe diameters into the soil. The test results show a significant progressive degradation of soil strength and diminution of excess pore water pressure with increasing number of riser penetration/uplift cycle. In view of the different types of environment loadings experienced by floating platforms and various soil conditions, tests were also conducted to investigate the effect of soil strength, riser displacement rate and loading mode on riser-soil interaction during repetitive penetration/uplift motion of the riser. 相似文献
12.
钢悬链线立管（steel catenary riser， 简称SCR）是一种优质的深水开发设备，近几年广泛用于深海环境下油气资源的开采。在浮式平台的周期性升沉运动和海浪海流的载荷作用下，立管的触底区会产生较为严重的疲劳破坏问题。为保证深海立管的高效与安全运行，清管作业是一项必要的维护手段。目前对于清管载荷作用下钢悬链线立管的位移变化规律研究比较匮乏。基于ABAQUS有限元软件和缩比试验准则，设计并开展有关清管载荷作用下钢悬链线立管的位移变化规律的缩比模型试验研究，从清管载荷的大小和作用位置等角度分别研究立管的X向与Y向的位移变化特征。研究结果表明，清管器在立管的触底段中运行并逐渐靠近触底点的过程中，清管器所在立管处的X向与Y向的位移会产生逐渐减小的趋势；当改变清管载荷的大小时，对于立管的同一位置来说，清管载荷的变化会导致立管的X向位移产生较Y向位移更加显著的变化；在清管器通过立管某一位置的前后过程中，X向位移变化呈现先增大后减小的趋势，而Y向位移仅在清管器通过该处时会有明显的减小。 相似文献
13.
In the present study, we simulated the reel-lay installation process of deepwater steel catenary risers（SCRs） using the finite element method and proposed multiaxial fatigue analysis for reeled SCRs. The reel-lay method is one of the most efficient and economical pipeline installation methods. However, material properties of reeled risers may change, especially in the weld zone, which can affect the fatigue performance. Applying finite element analysis（FEA）, we simulated an installation load history through the reel, aligner, and straightener and analyzed the property variations. The impact of weld defects during the installation process, lack of penetration and lack of fusion, was also discussed. Based on the FEA results, we used the Brown-Miller criterion combined with the critical plane approach to predict the fatigue life of reeled and non-reeled models. The results indicated that a weld defect has a significant influence on the material properties of a riser, and the reel-lay method can significantly reduce the fatigue life of SCRs. The analysis conclusion can help designers understand the mechanical performance of welds during reel-lay installation. 相似文献
14.
In the present study, we simulated the reel-lay installation process of deepwater steel catenary risers (SCRs) using the finite element method and proposed multiaxial fatigue analysis for reeled SCRs. The reel-lay method is one of the most efficient and economical pipeline installation methods. However, material properties of reeled risers may change, especially in the weld zone, which can affect the fatigue performance. Applying finite element analysis (FEA), we simulated an installation load history through the reel, aligner, and straightener and analyzed the property variations. The impact of weld defects during the installation process, lack of penetration and lack of fusion, was also discussed. Based on the FEA results, we used the Brown-Miller criterion combined with the critical plane approach to predict the fatigue life of reeled and non-reeled models. The results indicated that a weld defect has a significant influence on the material properties of a riser, and the reel-lay method can significantly reduce the fatigue life of SCRs. The analysis conclusion can help designers understand the mechanical performance of welds during reel-lay installation. 相似文献
15.
In recent years, offshore reservoirs have been developed in deeper and deeper water environments. Steel catenary risers (SCRs) are being considered in deepwater development such as Northern North Sea. SCRs used in conjunction with a semi-submersible or floating production, storage and offloading (FPSO) in deepwater harsh environments present significant design challenges. The large vertical motions at the semi or FPSO induce severe riser response, which results in difficulty meeting strength and fatigue criteria at the hang off and touch down point locations. To improve the understanding of SCR behaviour and increase the confidence in the design of such systems in deepwater harsh environments, a parametric study on a SCR connected to a semi-submersible was carried out in this paper to deal with the factors that mainly influence the loading condition and fatigue life of the riser. Weight-optimized configurations were applied during the course of riser design. Riflex combined with DeepC was the primary analysis tool used for the long-term response of the nonlinear SCR structure simulations, which requires a large amount of computer time. Hence, the parameters affecting the efficiency and accuracy of the simulations have also been studied during the analysis process. 相似文献
16.
基于ABAQUS/AQUA模块,当Spar平台发生涡激运动时,对与平台相连接的柔性立管进行时域动态响应分析,得到了不同折合速度下柔性立管的应力响应曲线.对立管触地区域和悬垂段进行了细化的分析,并利用S-N曲线和Miner线性累积损伤理论对平台涡激运动引起的柔性立管疲劳损伤进行了计算.研究结果表明:平台涡激运动对立管触地区域和悬垂段的影响较大,这两部分最容易在长时间的工作中产生疲劳损伤.特别是平台运动到近点时,立管触地区域受到的应力急剧增加,这个区域是立管工作的危险区域,应该特别注意.该研究结论可以作为立管结构设计和海底铺设时的参考,通过增加立管触地区域的结构强度和优化铺设方式,从而来提高立管的疲劳寿命和系统的安全性. 相似文献
17.
Steel catenary riser (SCR) is the transmission device between the seabed and the floating production facilities. As developments move into deeper water, the fatigue life of the riser can become critical to the whole production system, especially due to the vortex-induced vibration (VIV), which is the key factor to operational longevity. As a result, experimental investigation about VIV of the riser was performed in a large plane pool which is 60 m long, 36 m wide and 6.5 m deep. Experiments were developed to study the influence of current speed and seabed on VIV of SCR. The results show that amplitudes of strain and response frequencies increase with the current speed both in cross-flow (CF) and in-line (IL). When the current speed is high, multi-mode response is observed in the VIV motion. The amplitudes of strain in IL direction are not much smaller than those in CF direction. The seabed has influence on the response frequencies of riser and the positions of damage for riser. 相似文献
18.
浮体运动是引起钢悬链式立管(steel catenary riser,简称SCR)动态响应和疲劳损伤的关键因素,目前研究SCR问题时,为简化计算往往仅考虑平台一阶运动,忽略二阶运动影响。而实际上不同浮体结构的二阶运动响应特征明显,拟以SCR服役张力腿平台(tension leg platform,简称TLP)为例,探讨浮体二阶运动对SCR触地区动态响应的影响。建立考虑海床刚度退化的管土作用模型以改进现有的CABLE3D RSI程序,通过编写程序接口,将有限元分析得到的平台实际运动响应导入,研究平台不同运动作用下SCR触地区的位移、动力响应及疲劳分布情况。根据波流作用方向将TLP二阶慢漂运动分为近端和远端漂移两种工况,发现二阶运动下立管与海床的作用范围会增大,且触地区不仅发生高频小幅振荡运动,同时伴随低频大幅运动响应;平台远端漂移时,管内张力敏感程度高,而近端漂移时触地区的弯矩显著增大,都会不同程度提高触地区的疲劳损伤率。研究可为服役不同浮体的SCR响应预测与疲劳分析提供参考和借鉴。 相似文献
19.
This paper presents fatigue characteristic analysis of a deepwater steel catenary riser (SCR) under ambient excitations. The SCR involves complex nonlinear dynamic behaviors, especially at the touchdown point (TOP) where the riser first touches the seafloor. Owing to the significant interaction with soil, the touchdown zone is difficult to be modeled. Based on Lumped-Mass method and P-y curve, nonlinear springs are used to simulate the SCR-seabed coupled interaction. In case studies, an SCR's dynamic features have been obtained by transient analysis and the structure fatigue assessment has been carried out by S-N approach. The comparative analysis shows that the TOP is the key location where soil-riser interaction rises steeply and minimum fatigue life occurs. Parameters such as ocean environment loads, vessel motions, riser material and geometric parameters are discussed. The results indicate that the vessel motion is the principal factor for the structure fatigue lite distribution. 相似文献