共查询到20条相似文献，搜索用时 31 毫秒
1.
P. Ruggiero D.J.R. Walstra G. Gelfenbaum M. van Ormondt 《Coastal Engineering》2009,56(11-12):1153-1172
A coupled waves–currents-bathymetric evolution model (DELFT-3D) is compared with field measurements to test hypotheses regarding the processes responsible for alongshore varying nearshore morphological changes at seasonal time scales. A 2001 field experiment, along the beaches adjacent to Grays Harbor, Washington, USA, captured the transition between the high-energy erosive conditions of winter and the low-energy beach-building conditions typical of summer. The experiment documented shoreline progradation on the order of 10–20 m and on average approximately 70 m of onshore sandbar migration during a four-month period. Significant alongshore variability was observed in the morphological response of the sandbar over a 4 km reach of coast with sandbar movement ranging from 20 m of offshore migration to over 175 m of onshore bar migration, the largest seasonal-scale onshore migration event observed in a natural setting. Both observations and model results suggest that, in the case investigated here, alongshore variations in initial bathymetry are primarily responsible for the observed alongshore variable morphological changes. Alongshore varying incident hydrodynamic forcing, occasionally significant in this region due to a tidal inlet and associated ebb-tidal delta, was relatively minor during the study period and appears to play an insignificant role in the observed alongshore variability in sandbar behavior at kilometer-scale. The role of fully three-dimensional cell circulation patterns in explaining the observed morphological variability also appears to be minor, at least in the case investigated here. 相似文献
2.
This paper builds on the work of Masselink [Masselink, G., 1993. Simulating the effects of tides on beach morphodynamics. J. Coast. Res. SI 15, 180–197.] on the use of the residence times of shoaling waves, breaking waves and swash/backwash motions across a cross-shore profile to qualitatively understand temporal beach behaviour. We use a data set of in-situ measurements of wave parameters (height and period) and water depth, and time-exposure video images overlooking our single-barred intertidal measurement array at Egmond aan Zee (Netherlands) to derive boundaries between the shoaling zone, the surf zone and the swash zone. We find that the boundaries are functional dependencies of the local relative wave height on the local wave steepness. This contrasts with the use of constant relative wave heights or water levels in earlier work. We use the obtained boundaries and a standard cross-shore wave transformation model coupled to an inner surf zone bore model to show that large (> 5) relative tide ranges (RTR, defined as the ratio tide range–wave height) indicate shoaling wave processes across almost the entire intertidal profile, with surf processes dominating on the beach face. When the RTR is between 2 and 5, surf processes dominate over the intertidal bar and the lower part of the beach face, while swash has the largest residence times on the upper beach face. Such conditions, associated with surf zone bores propagating across the bar around low tide, were observed to cause the intertidal bar to migrate onshore slowly and the upper beach face to steepen. For RTR values less than about 2, surf zone processes dominate across the intertidal bar, while the dominance of swash processes now extends across most of the beach face. The surf zone processes were now observed to lead to offshore bar migration, while the swash eroded the upper beach face. 相似文献
3.
The morphological changes of multiple intertidal bars (ridges) on a macrotidal beach were examined under low-energy wave conditions during a spring-to-spring tidal cycle. The morphological response was coupled to the tidal water level variations and related residence times for swash processes and surf (breaking waves and bores) over the cross-shore profile. Spring tides induced a large spatial variation in water lines and small residence times for distinct processes. Neap tides narrowed the intertidal area and increased the time for certain processes to work on the sediment at one location. The observed morphological changes could be coupled to the stagnation of processes at a certain bar crest position. The action of surf (breaking waves and bores) played the major role in the onshore migration of the intertidal bars and the simultaneous erosion of the seaward flank. Swash action, responsible for the generation and migration of intertidal bars in microtidal settings, was not the dominant process in causing the observed morphological changes. Intertidal ridges on macrotidal beaches cannot be considered swash bars as suggested by most previous investigations into these morphological features. 相似文献
4.
The response to a shoreface nourishment of the two-bar system at Noordwijk (the Netherlands) is analyzed based on a daily data set of time-exposure video images collected during about 6 years, complemented with topographic and bathymetric surveys. The 1.7 Mm3 nourishment, implemented as a 3 km alongshore bump seaward of the outer bar, migrated more than 300 m onshore in 4 years before losing its integrity. Furthermore, the nourishment interrupted the autonomous seaward migration of both bars for the entire duration of the study period and, allaying earlier fears, did not intensify the three-dimensional patterns in the bars, such as the crescentic plan-shape and rip channels. The nourishment did result in clear head effects on both flanks, with the bar becoming discontinuous and the flank section decaying or becoming attached to an offshore-located bar, while the section of bar landward of the nourishment became attached to a landward-located bar. This sequence of morphologies is known as bar switching. Each switching episode took almost one year to complete and can therefore not be ascribed to individual wave events. We suspect that shoreface nourishments enhance the possibility of bar switching by creating alongshore variability in the position and depth of the outer bar and in its cross-shore migration rate and direction. The Noordwijk nourishment did not influence the shoreline position as its trend did not undergo distinctive variations after 1998. Differences in the response of the Noordwijk sandbars to the shoreface nourishment compared with other Dutch nourishments are attributed to the location and size (volume per unit length) of the nourishment with respect to the sandbars and to the median grain size of the nourished material. 相似文献
5.
《Coastal Engineering》2002,45(1):19-32
The remote sensing of the sea surface is commonly regarded as a logistically simple and cost-effective way of obtaining long-term (>years) time series of nearshore sandbar location. In this paper, we demonstrate that, similar to video imagery, time-exposure X-band (∼3 cm wave length) radar images contain alongshore, breaking-related high-intensity bands that can be used to compute the location of the underlying sandbar crests. Analysis of time-exposure X-band images and bathymetric surveys collected at Egmond aan Zee, Netherlands shows that the radar-based bar crest location, defined as the cross-shore location of maximum radar intensity, differs from the in situ surveyed crest location by a distance of O(10 m). This difference, Δx̄radar, depends linearly on the offshore water level, consistent with model predictions in which the radar intensity is assumed to behave as the energy of the surface roller. The model additionally suggests a dependence of Δx̄radar on the offshore wave height when the wave field across the bar is non-saturated. In general, such wave conditions did not result in radar images with sufficient contrast to determine the bar crest location and, accordingly, the wave-height dependence was not observed clearly in the field. Because of the dependence of Δx̄radar on the offshore water level, time series of radar-based bar crest location show artificial variability when the images are collected at different water levels. Various techniques for correcting this variability are discussed. 相似文献
6.
7.
Between April 2002 and April 2003, in situ measurements of water depth, current velocity and suspended sediment content were carried out in edge region of East Chongming salt marsh and neighboring bald flat in the Changjiang (Yangtze) Estuary under different weather conditions. Cross-shore suspended sediment flux was calculated and analyzed. The results show that under calm weather conditions, the current velocity process in bald field and salt marsh area varied differently during semidiurnal tidal cycles. Owing to current velocity asymmetry, mean SSC during flood tide phase was 1.8 times higher than that of ebb tide phase. As a result, net onshore sediment flux controlled cross-shore suspended sediment transport process and salt marsh pioneer zone was generally accreting. There was significant positive correlation between total sediment flux and quartic power of maximum water depth. It indicates that tidal ranges dominate suspended sediment transport and sedimentation process in the salt marsh pioneer zone under the calm weather condition. The sedimentation rate on the adjacent mudflat was higher than the salt marsh, which induced stable accreting of salt marsh towards the sea. The wind events enhanced SSC and current velocity during the semidiurnal tides. And the remarkable onshore net sediment flux could occur on the high marsh and mudflat close to the marsh fringe during the short period under the rough weather condition. 相似文献
8.
The morphology, bedforms and hydrodynamics of Merlimont beach, in northern France, characterised by intertidal bars and a spring tidal range of 8.3 m, were surveyed over a 10-day experiment with variable wave conditions that included a 2-day storm with significant wave heights of up to 2.8 m. The beach exhibited two pronounced bar-trough systems located between the mean sea level and low neap tide level. Waves showed a cross-shore depth modulation, attaining maximum heights at high tide. The mean current was characterised dominantly by strong tide-induced longshore flows significantly reinforced by wind forcing during the storm, and by weaker, dominantly offshore, wave-induced flows. Vertical tidal water-level variations (tidal excursion rates) showed a bimodal distribution with a peak towards the mid-tide position and low rates near low and high water. The two bar-trough systems in the mid-tide zone remained stable in position during the experiment but showed significant local change. The absence of bar migration in spite of the relatively energetic context of this beach reflects high macro-scale bar morphological lag due to a combination of the large vertical tidal excursion rates in the mid-tide zone, the cross-shore wave structure, and the pronounced dual bar-trough system. The profile exhibited a highly variable pattern of local morphological change that showed poor correlation with wave energy levels and tidal excursion rates. Profile change reflected marked local morphodynamic feedback effects due mainly to breaks in slope associated with the bar-trough topography and with trough activity. Change was as important during low wave-energy conditions as during the storm. Strong flows in the entrenched troughs hindered cross-shore bar mobility while inducing longshore migration of medium-sized bedforms that contributed in generating short-term profile change. The large size and location of the two pronounced bars in the mid-tide zone of the beach are tentatively attributed respectively to the relatively high wave-energy levels affecting Merlimont beach, and to the cross-shore increase in wave height hinged on tidal modulation of water depths. These two large quasi-permanent bars probably originated as essentially breakpoint bars and are different from a small bar formed by swash and surf processes in the course of the experiment at the mean high water neap tide level, which is characterised by a certain degree of tidal stationarity and larger high-tide waves. 相似文献
9.
XIE Ming-xiao ZHANG Chi YANG Zhi-wen LI Shan LI Xin GUO Wei-jun ZUO Shu-hua 《海洋工程》2017,31(5):549-558
A process-based 3D numerical model for surfzone hydrodynamics and beach evolution was established. Comparisons between the experimental data and model results proved that the model could effectively describe the hydrodynamics, sediment transport feature and sandbar migration process in the surfzone with satisfactory precision. A series of numerical simulations on the wave breaking and shoaling up to a barred beach were carried out based on the model system. Analyzed from the model results, the wave-induced current system in the surfzone consists of two major processes, which are the phase-averaged undertow caused by wave breaking and the net drift caused by both of the nonlinear wave motion and surface roller effect. When storm waves come to the barred beach, the strong offshore undertow along the beach suppresses the onshore net drift, making the initial sandbar migrate to the seaside. Under the condition of calm wave environment, both the undertow and net drift flow to the shoreline at the offshore side of the sandbar, and then push the initial sandbar to the shoreline. The consideration of surface roller has significant impact on the modeling results of the sandbar migration. As the roller transfer rate increases, the sandbar moves onshore especially under the storm wave condition. 相似文献
10.
《Coastal Engineering》2006,53(10):817-824
The 25-m onshore migration of a nearshore sandbar observed over a 5-day period near Duck, NC, is simulated with a simplified, computationally efficient, wave-resolving single-phase model. The modeled sediment transport is assumed to occur close to the seabed and to be in phase with the bottom stress. Neglected intergranular stresses and fluid–granular interactions, likely important in concentrated flow, are compensated for with an elevated (relative to that appropriate for a clear fluid) model roughness height that gives the best fit to the observed bar migration. Model results suggest that when mean-current-induced transport is small, wave-induced transport leads to the observed onshore bar migration. Based on the results from the simplified phase-resolving model, a wave-averaged, energetics-type model (e.g., only moments of the near-bottom velocity field are required) with different friction factors for oscillatory and mean flows is developed that also predicts the observed bar migration. Although the assumptions underlying the models differ, the similarity of model results precludes determination of the dominant mechanisms of sediment transport during onshore bar migration. 相似文献
11.
SWAN model predictions, initialized with directional wave buoy observations in 550-m water depth offshore of a steep, submarine canyon, are compared with wave observations in 5.0-, 2.5-, and 1.0-m water depths. Although the model assumptions include small bottom slopes, the alongshore variations of the nearshore wave field caused by refraction over the steep canyon are predicted well over the 50 days of observations. For example, in 2.5-m water depth, the observed and predicted wave heights vary by up to a factor of 4 over about 1000 m alongshore, and wave directions vary by up to about 10°, sometimes changing from south to north of shore normal. Root-mean-square errors of the predicted wave heights, mean directions, periods, and radiation stresses (less than 0.13 m, 5°, 1 s, and 0.05 m3/s2 respectively) are similar near and far from the canyon. Squared correlations between the observed and predicted wave heights usually are greater than 0.8 in all water depths. However, the correlations for mean directions and radiation stresses decrease with decreasing water depth as waves refract and become normally incident. Although mean wave properties observed in shallow water are predicted accurately, nonlinear energy transfers from near-resonant triads are not modeled well, and the observed and predicted wave energy spectra can differ significantly at frequencies greater than the spectral peak, especially for narrow-band swell. 相似文献
12.
Time-series of nearbed horizontal flow velocities and suspended sediment concentrations obtained from a colocated electromagnetic current meter (EMCM) and optical backscatter sensor (OBS), respectively, are used to examine the relative importance of steady and fluctuating components to the total sediment transport over a full tidal cycle on a macrotidal, intermediate beach (Spurn Head, UK). Fluctuating sediment fluxes are decomposed into gravity and infragravity contributions using co-spectral techniques. The relative importance of the oscillatory (gravity and infragravity) and steady (mean) transport components to the total sediment transport is analysed throughout the tidal cycle.
A continuum of 34 discrete suspended sediment-cross-shore velocity co-spectra are computed over a full tidal cycle for the OBS and EMCM measurements 0.10 m above the bed. These net transport spectra vary greatly both with cross-shore location and tidal state. In particular, a marked asymmetry in transport processes is evident between the flood and ebb tides, with high levels of sediment resuspension and transport occurring on the ebbing tide approximately two hours after high water (just seaward of the breakpoint). At this time the dominant transport was directed offshore (co-spectral peak, 0.04 kg/m2/s) at incident wave frequency.
Typical patterns are observed in transport spectra outside the surf zone and within the inner surf zone. Outside the narrow surf zone cross-shore transport spectra show weak offshore transport (co-spectral peak = 0.002 kg/m2/s) associated with bound long waves and stronger onshore transport (co-spectral peak = 0.006 kg/m2/s) at incident wave frequencies. Conversely, co-spectra computed within the inner surf zone show the offshore sediment fluxes (spectral peak = 0.010 kg/m2/s) at infragravity frequencies to be greater in magnitude than the corresponding onshore transport (co-spectral peak = 0.008 kg/m2/s) occurring at incident wave frequencies. 相似文献
13.
Nathaniel G. Plant Kacey L. Edwards James M. Kaihatu Jayaram Veeramony Larry Hsu K. Todd Holland 《Coastal Engineering》2009
Nearshore wave and flow model results are shown to exhibit a strong sensitivity to the resolution of the input bathymetry. In this analysis, bathymetric resolution was varied by applying smoothing filters to high-resolution survey data to produce a number of bathymetric grid surfaces. We demonstrate that the sensitivity of model-predicted wave height and flow to variations in bathymetric resolution had different characteristics. Wave height predictions were most sensitive to resolution of cross-shore variability associated with the structure of nearshore sandbars. Flow predictions were most sensitive to the resolution of intermediate scale alongshore variability associated with the prominent sandbar rhythmicity. Flow sensitivity increased in cases where a sandbar was closer to shore and shallower. Perhaps the most surprising implication of these results is that the interpolation and smoothing of bathymetric data could be optimized differently for the wave and flow models. We show that errors between observed and modeled flow and wave heights are well predicted by comparing model simulation results using progressively filtered bathymetry to results from the highest resolution simulation. The damage done by over smoothing or inadequate sampling can therefore be estimated using model simulations. We conclude that the ability to quantify prediction errors will be useful for supporting future data assimilation efforts that require this information. 相似文献
14.
15.
16.
通过物理模型实验研究了海岸沙坝剖面和滩肩剖面的形成和演化过程,给出了稳定的沙坝剖面和滩肩剖面的几何特征。实验中考虑了两种初始坡度(1∶20和1∶10)和不同波高的规则波和不规则波,讨论了不同初始坡度海岸上破碎波空间分布特征。结果表明,沙坝产生后存在向岸和离岸两种运动形态,但最终将停留在稳定位置。稳定的沙坝剖面对应不同初始坡度和波浪存在不同的大沙坝和小沙坝分布。沙坝剖面由长时间小波高波浪序列作用后可转化为稳定滩肩剖面,该剖面不依赖于波浪和初始坡度。实验也给出了平衡剖面与理论曲线的对比以及剖面上泥沙粒径的分布。 相似文献
17.
Herman C. Miller 《Coastal Engineering》1999,36(4):27
This paper presents an analysis of longshore sediment transport (LST) rates based on an accumulation of data obtained during five storms. Direct measurements of velocities and suspended sediment concentration were conducted at a minimum of nine positions across a barred profile in waves up to Hm0=3.5 m to provide a measure of the cross-shore distribution and total suspended-load sediment transport rates. The study was conducted at the US Army Engineer Waterways Experiment Station's Field Research Facility, located in Duck, NC. Measurements were made using the Sensor Insertion System (SIS) which provides an economical means to collect the required information. The largest LST rate computed from the measurements was 1780 m3 h−1. Although the cross-shore distribution of the LST varied, it most often had two peaks associated with wave shoaling and breaking at the bar and near the beach. Comparisons of measurement results with predictions using the ‘CERC' LST formula show the predicted rates were sometimes higher and other times lower; suggesting that additional terms may be required for short term predictions during storms. Comparisons to a ‘Bagnold' type formulation, which included a velocity term that could account for wind and other effects on LST, show better agreement for at least one of the storms. These results are intended to help fill a void of information documenting the cross-shore distribution and LST rates, particularly during storms. 相似文献
18.
This paper describes newly obtained, high-frequency observations of beach face morphological change over numerous tidal cycles on a macrotidal sandy beach made using a large array of ultrasonic altimeters. These measurements enable the net cross-shore sediment fluxes associated with many thousands of individual swash events to be quantified. It is revealed that regardless of the direction of net morphological change on a tidal time scale, measured net fluxes per event are essentially normally distributed, with nearly equal numbers of onshore and offshore-directed events. The majority of swash events cause net cross-shore sediment fluxes smaller than ± 50 kg m− 1 and the mean sediment flux per swash event is only O(± 1 kg m− 1) leading to limited overall morphological change. However, much larger events which deposit or remove hundreds of kilograms of sand per meter width of beach occur at irregular intervals throughout the course of a tide. It was found that swash–swash interactions tend to increase the transport potential of a swash event and the majority of the swash events that cause these larger values of sediment flux include one or more interactions. The majority of the larger sediment fluxes were therefore measured in the lower swash zone, close to the surf/swash boundary where swash–swash interactions are most common. Despite the existence of individual swash events that can cause fluxes of sediment that are comparable to those observed on a tidal time scale, frequent reversals in transport direction act to limit net transport such that the beach face volume remains in a state of dynamic equilibrium and does not rapidly erode or accrete. 相似文献
19.
Two sets of moorings were deployed along a cross-shelf transect in central Santa Monica bay for four months in the winter of 1998-1999. Both sites had an array of instruments attached to tripods set on the seafloor to monitor currents over the entire water column, surface waves, near-bed temperature, water clarity and suspended sediment. A companion mooring had temperature sensors spaced approximately 10 m apart to measure temperature profiles between the surface and the seafloor. One array was deployed in 70 m of water at a site adjacent to the shelf break, just northwest of a major ocean outfall. The other was deployed on the mid shelf in 35 m of water approximately 6 km from the shelf break site. The subtidal currents in the region flowed parallel to the isobaths with fluctuating time scales around 10 days, a typical coastal-ocean pattern. However, during the falling phase of the barotropic spring tide, sets of large-amplitude, sheared cross-shore current pulses with a duration of 2-5 h were observed at the shelf break site. Currents in these pulses flowed exclusively offshore in a thin layer near the bed with amplitudes reaching 30-40 cm/s. Simultaneously, currents with amplitudes around 15-20 cm/s flowed exclusively onshore in the thicker layer between the offshore flow layer and the sea surface. The net offshore transport was about half the onshore transport. Near-surface isotherms were depressed 30-40 m. These pulses were likely internal bores generated by tidal currents. Bed stresses associated with these events exceeded 3 dynes/cm(2). These amplitudes are large enough to resuspend and transport not only fine-grained material, but also medium to coarse sands from the shelf toward the slope. Consequently, the seafloor over the shelf break was swept clear of fine sediments. The data suggest that the internal bores dissipate and are reduced in amplitude as they propagate across this relatively narrow shelf. There is evidence that they reach the 35 m site, but other coastal ocean processes obscure their distinctive characteristics. 相似文献
20.
Field measurements of cross-shore currents 0.25 m from the bed were made on two natural beaches under a range of incident wave conditions. The results indicated the presence of a relatively strong, offshore-directed mean current, both within and seaward of the surf zone. Typical velocities within the surf zone were of the order of 0.2–0.3 m/s. This bed return flow, or “undertow”, represents a mass conservation response, returning water seaward that was initially transported onshore in the upper water column, primarily above the trough of the incident waves. The measurements demonstrated that the bed return flow velocity increases with the incident wave height. In addition, the crossshore distribution of the bed return flow is characterised by a mid-surf zone maximum, which exhibits a strong decrease in velocity towards the shoreline and a more gradual decay in the offshore direction. Several bed return flow models based on mass continuity were formulated to predict the cross-shore distribution of the bed return flow under an irregular wave field and were compared with the field data. Best agreement was obtained using shallow water linear wave theory, after including the mass transport associated with unbroken waves. The contribution of the unbroken waves enables net offshore-directed bottom currents to persist outside the region of breaking waves, providing a mechanism, other than rip currents, to transport sediment offshore beyond the surf zone. 相似文献