共查询到20条相似文献，搜索用时 93 毫秒
1.
A novel stiffened joint called bulge formed joint was put forward. Compared with the unstiffened joint, an additional bulge plate is utilized to connect the chord and braces. Based on the finite element (FE) and experimental method, stress concentration factors (SCFs) were investigated for both a bulge formed K-joints and the corresponding unstiffened joint. By the verification of experimental data, the FE models were used to investigate the SCFs of the bulge formed joints. The maximum SCF of the bulge formed K-joint under balanced axial loads is located at the position φ = 105°, which is close to but not exactly the saddle. The SCFs around the intersection weld can decrease remarkably compared with the unstiffened joint by the change of geometrical parameters of the bulge plate. Then 2117 FE analyses were conducted to investigate the geometrical effects on SCFs of the bulge formed joint. These dimensionless geometrical parameters include τs, η1, η2, θ, β, γ, τ, among which, the first three parameters are typical of the bulge formed joints, while the others are same as the definitions in the unstiffened joints. Finally, a set of SCF parametric formulas were obtained by nonlinear regression analyses. 相似文献
2.
In this paper, results of comprehensive finite element (FE) analyses carried out on 81 generated models of tubular K-joints are presented. Results of FE models were verified against experimental data and parametric equations. The fatigue life of a tubular joint, which is commonly found in offshore industry, is not only dependent on the value of hot-spot stress (HSS), but is also significantly influenced by the through-the-thickness stress distribution characterized by the degree of bending (DoB). Data extracted from FE analyses was used to study the effects of geometrical parameters on the DoB values in tubular K-joints subjected to two types of out-of-plane bending (OPB) moment loads. The determination of DoB values in a tubular joint is essential for improving the accuracy of fatigue life estimation using the stress-life (S–N) method and particularly for predicting the fatigue crack growth based on the fracture mechanics (FM) approach. Geometrically parametric investigation was followed by a set of nonlinear regression analyses to develop DoB parametric formulas for the fatigue analysis of K-joints under OPB loadings. 相似文献
3.
振动时效技术是一种有效消除焊接残余应力、提升构件使用寿命、保证结构尺寸精度的方法。在自升式平台固桩架建造过程中,焊接施工导致其内部产生大量的残余应力,残余应力是导致固桩架精度超差和损伤失效的重要原因之一,它会大幅度降低平台的疲劳寿命,因此,固桩架建造完成后消除其内部残余应力对于平台的使用安全至关重要。本文以一个质量约100 t的固桩架分段为研究对象,采用专门的振动时效设备对固桩架施加激振力,测量振动时效前后主焊缝附近的残余应力水平。通过对比分析发现,振动时效技术可以有效降低固桩架焊接过程中产生的残余应力,达到调整、均化、降低残余应力水平、提高构件尺寸精度稳定性的效果,有利于提升平台的使用寿命。 相似文献
4.
KK型管节点是自升式平台桁架式桩腿中的一种管节点，其应力集中系数是影响桩腿疲劳寿命的重要参数。应力集中系数与管节点的几何形式密切相关，为分析KK型管节点应力集中系数对几何参数的敏感性，利用ANSYS软件对某KK型管节点进行几何参数化建模，利用有限元数值模拟方法对各工况下的热点应力进行分析，并分别计算各相应工况下的名义应力，然后将热点应力与名义应力相比得到不同几何参数下的热点应力集中系数。对计算结果进行整理分析，得到了KK型管节点应力集中系数对无量纲几何参数的敏感性规律。结果表明，应力集中系数与撑杆受力状态、管节点结构形式有关，在满足结构布置、建造工艺和其他安全性指标的前提下，分析结果能够为KK型管节点的结构设计和疲劳分析提供技术支撑。 相似文献
5.
钢筋锈蚀是严重威胁结构安全的耐久性问题,基于压磁效应,研究均匀锈蚀和坑蚀两种锈蚀钢筋的应力状态与压磁场变化的关系。首先,采用通电加速锈蚀方法进行钢筋均匀锈蚀和点蚀试验;然后,通过轴向拉伸静载试验和疲劳加载试验,分析锈蚀钢筋的压磁信号特征。试验结果显示,磁感强度与钢筋应力状态之间具有较好的对应关系,屈服阶段不同锈蚀率下的钢筋磁感强度曲线有较明显区别,疲劳荷载作用下锈蚀钢筋的法向残余磁感强度和磁滞回环面积均呈现疲劳三阶段变化规律,可进一步运用于钢筋应力状态的检测中。 相似文献
6.
Wu Lianyuan Hu Gangyi Professor Shanghai Jiaotong University Shanghai Engineer Wuhan Ship Development & Design Institute Wuhan 《中国海洋工程》1994,(2)
-This paper adopts approximate formulas for residual stresses caused by cold bending for plates with stress-strain curve form a = K n. A typical distribution of the longitudinal residual stress due to welding is also assumed. The effects of residual stress due to cold bending and welding on plastic buckling of axially compressed cylindrical shells are studied by the finite element method. 相似文献
7.
The stress state and rock mechanical properties govern the growth of faults and fractures, which constitute shallow hydrothermal pathways and control the distribution of seafloor massive sulfide (SMS) mounds in the seafloor hydrothermal field. The stress field has an important influence on the formation and persistence of hydrothermal pathways. Based on multibeam bathymetric data from the Trans-Atlantic Geotraverse (TAG) field, we establish two three-dimensional geological models with different scales to simulate the stress field, which investigate the characteristics of hydrothermal pathways and associated SMS mounds. The simulation results show that oblique faults and fissures form in the tensile stress zone and that mounds, including active and inactive hydrothermal mounds form in the compressive stress zone. Fault activity, which is related to the stress field, affects the opening and closing of hydrothermal channels and changes the permeability structure of subseafloor wall rock. Therefore, the stress field controls the development and persistence of shallow hydrothermal pathways. The features of shallow hydrothermal pathways in the stress field can provide geomechanical information that is useful for identifying favorable zone for SMS deposit formation. 相似文献
8.
9.
针对传统无损检测方法对自升式海洋平台检测工作量大、费时费力等问题,提出了一种金属磁记忆(MMM)与交流电磁场(ACFM)联合检测的新方法。在简介MMM和ACFM检测机理之后,将其应用到自升式海洋平台关键部位的无损检测中。分别以齿条座板与桩腿之间的T型焊缝和桩腿环焊缝为例,首先通过MMM快速全面扫描待检测表面,基于磁场分布及梯度值确定应力集中部位;在此基础上,利用ACFM方法重点对应力集中部位进行裂纹缺陷的定量化检测,结果表明MMM对应力集中或微观缺陷非常敏感,而ACFM方法可精确给出裂纹缺陷的深度信息,为平台结构的安全可靠运行和维修方案制定提供了方法参考和理论依据。 相似文献
10.
目前我国的海洋工程结构中,导管架式海洋平台占有很大比重,动荷载作用下导管架式海洋平台的振动问题日益突出。随着石油开发向深海进军,平台结构柔性更大,振动问题更为显著,可能对结构、设备及人员造成一定的安全隐患。基于现场监测获得的导管架平台振动响应,结合相关规范给出振动对人体的影响,提出人员感受评价流程。最后,以渤海、南海海域的导管架平台为例,基于现场监测,分析了结构的振动特性及作业人员在相应振动环境下的感受。此方法对导管架平台上部作业人员的工作与安全保障提供了科学依据。 相似文献
11.
In the present paper, results of a parametric study conducted on the Local Joint Flexibility (LJF) of two-planar tubular DK-joints under In-Plane Bending (IPB) loads are presented. DK-joints are among the most common joint types in jacket substructure of Offshore Wind Turbines (OWTs). A total of 324 finite element (FE) analyses were carried out on 81 FE models under four types of IPB loading in order to investigate the effect of the DK-joint’s geometrical parameters on the LJF factor (fLJF). Based on the results of parametric study, the factors leading to the LJF reduction were introduced. Generated FE models were verified using the existing experimental data, FE results, and parametric equations. The effect of the weld profile was also considered. The fLJF in two-planar DK- and uniplanar K-joints were compared. Results indicated that the effect of multi-planarity on the LJF is quite significant and consequently the use of the equations already available for uniplanar K-joints to calculate the fLJF in two-planar DK-joints may lead to highly under-/over-predicting results. To handle this issue, the FE results were used to derive a set of parametric equations for the prediction of the fLJF in IPB-loaded two-planar DK-joints. The proposed equations were checked against the acceptance criteria recommended by the UK DoE and can be reliably used for the analysis and design of tubular joints in OWTs. 相似文献
12.
主电站作为海洋石油开采平台最重要的核心组成，为整个平台提供动力来源，是保证平台能够正常运转的心脏器官。从机组类型、特点，以及相应的工作原理等几个方面对海洋石油开采平台上的主电站作了简要的描述；依据相关基础数据，结合锦州25—1南油气田的特点，对油气田进行了电负荷分析，得出油气田设计所需要的典型电负荷量以及相关的数据；通过对机组容量、负荷率、备用率、机组占用平台面积、机组重量等几个参数的比对，从往复式发动机电站机组和燃气透平机电站机组中优选出了主电站机组方案。通过对锦州25—1南油气田主电站方案优选的详细阐述，为海洋石油开采平台主电站的选型设计提供参考和借鉴。 相似文献
13.
单点系泊海洋导管架平台结构体系可靠性分析 总被引：4，自引：1，他引：3
采用非线性逐步倒塌分析方法,考虑桩-土-结构的非线性相互作用,研究了单点系泊海洋导管架平台在极端荷载作用下的承载能力计算模型,在此基础上结合蒙特卡洛随机抽样法,提出了单点系泊海洋导管架平台结构体系可靠度计算方法。最后对工程实例BZ28-1SPM单点系?白海洋导管架平台结构在20年设计基准期和50年重现期进行了体系可靠性分析：研究结果表明：用50年重现期的环境荷载参数来进行BZ28-1SPM单点系泊海洋导管架平台结构的设计是合理的;在环境荷载中起主导作用的是由波浪引起的系泊力;在海洋平台结构的设计及对已服役平台结构的评估中运用体系可靠度理论,可以为海洋平台结构的设计、维护和评估提供理论依据。 相似文献
14.
海洋石油钻井平台是海洋油气勘探开发的重要手段,其安全就位和稳定施工,与井场区海底的工程地质条件密切相关。就事关平台安全的工程地质条件预测评价技术作了研究,评价预测了与自升式钻井平台稳定作业有关的软弱下卧地层的穿插和持力、海底斜坡条件下工程地质层稳定性、半潜式钻井平台的锚固力以及不同底质条件下海底底流的冲蚀。推荐了实践有效的半经验计算公式,为海洋石油钻井平台井场工程地质条件的稳定评价提供参考。 相似文献
15.
When studying the low-cycle fatigue crack initiation life of notched plates, the effects of fatigue short crack and accumulative plastic damage in the vicinity of the notch should be considered. The low-cycle fatigue crack initiation life of notched plates has been revised in the analysis process by considering the short crack initiation and expansion of notch stress concentration area. By determining the accumulative plastic deformation in the vicinity of a notch under low-cycle fatigue loads, a predictive model of low-cycle fatigue crack initiation life was presented for notched plates, and the relative influence factors were quantitatively analyzed. A comparison study verified that the results obtained from the presented calculation model correlate quite well with those from the existing experiments. Some important conclusions were drawn from the study on considering the effects of short crack and accumulative plastic damage. The presented method may be used for predicting the low-cycle fatigue crack initiation life of ship plate. 相似文献
16.
Efficient Approximate Method of Global Reliability Analysis for Offshore Platforms in the Ice Zone 总被引：1，自引：0，他引：1
Ice load is the dominative load in the design of offshore platforms in the ice zone, and the extreme ice load is the key factor that affects the safety of platforms. The present paper studies the statistical properties of the global resistance and the extreme responses of the jacket platforms in Bahai Bay, considering the randomness of ice load, dead load, steel elastic modulus, yield strength and structural member dimensions. Then, based on the above results, an efficient approximate method of the global reliability analysis for the offshore platforms is proposed, which converts the implicit nonlinear performance function in the conventional reliability analysis to linear explicit one. Finally, numerical examples of JZ20-2 MSW, JZ20-2NW and JZ20-2 MUQ offshore jacket platforms in the Bahai Bay demonstrate the satisfying efficiency, accuracy and applicability of the proposed method. 相似文献
17.
循环应力下饱和黏土剪切变形特性试验研究 总被引：3，自引：0，他引：3
针对饱和重塑黏土,利用土工静力-动力液压三轴-扭转多功能剪切仪,在不固结不排水(UU)条件下进行了应力控制式循环扭剪和竖向-扭转耦合试验,通过对试验结果的对比分析探讨了初始预剪应力和应力反向对应力-应变关系特性的影响,并阐述了不同加荷模式下孔隙水压力发展特性。以此为基础,综合考虑剪切变形和正向偏差变形的共同效应,同时为了能够反映平均残余变形和循环变形的影响,建议了一个综合应变破坏标准的算式。进而通过利用试验数据与目前常用的应变标准比较,表明这种破坏标准具有普遍适用性和较好的稳定性,适用于判定各种应力条件下黏土试样破坏及其强度。 相似文献
18.
随着深海油气田的不断开发,各种适应深海环境的浮式平台陆续涌现。多数深海平台通过立柱支撑上层甲板,波浪沿柱体表面的爬升效应极为明显,大大增加了强非线性砰击和越浪的危险,甚至将导致平台局部结构以及相关设备的破坏。因此,波浪爬升效应在平台设计及结构安全性方面具有重要的意义,并成为平台水动力研究的热点问题之一,是平台气隙预报的一个重要方面。介绍波浪爬升效应在平台设计阶段的重要性,分析波浪爬升的成因和影响因素,就目前国际上相关研究情况及进展进行了详细的阐述,并提出了这一课题未来研究方向的有关建议。 相似文献
19.
20.
分别在27℃和32℃高温条件下培养羊栖菜(Sargassum fusiforme), 以在22℃培养条件下生长的羊栖菜作为对照, 在培养的第0、1、3、5和7天分别取气囊样品, 采用植物生理学试验方法探讨高温胁迫对羊栖菜细胞膜损伤、渗透调节和抗氧化保护的影响。结果表明: 1) 高温胁迫导致羊栖菜细胞的相对电导率提高和丙二醛(MDA)质量摩尔浓度增加, 膜系统受到了损伤, 造成体内离子外渗、细胞膜脂发生过氧化; 2) 细胞内积累了可溶性蛋白、可溶性糖和脯氨酸等渗透调节物质并且胁迫组始终高于对照组, 其中可溶性蛋白在胁迫第7天时达到最大值(11.4μg·mg-1), 而可溶性糖和脯氨酸均呈现先升高后降低的趋势, 分别在高温培养的第3天和第5天时达到最大值; 3) 受到高温胁迫后, 羊栖菜超氧化物歧化酶(SOD)比活性增强, 而过氧化物酶(POD)和过氧化氢酶(CAT)比活性在高温胁迫过程中呈现下降的趋势, 说明羊栖菜主要通过抗氧化酶SOD比活性增强来降低胁迫对藻体带来的伤害。总之, 羊栖菜对高温胁迫比较敏感, 温度越高, 培养时间越长, 羊栖菜受到的伤害越大。 相似文献