共查询到20条相似文献，搜索用时 140 毫秒
1.
应用基于势流理论的时域高阶边界元方法,建立一个完全非线性的三维数值波浪水槽,通过实时模拟推板造波运动的方式产生波浪。通过混合欧拉-拉格朗日方法和四阶Runge-Kutta方法更新自由水面和造波板的瞬时位置。利用所建模型分别模拟了有限水深波和浅水波,与试验结果、相关文献结果和浅水理论结果吻合较好,且波浪能够稳定传播。系统地讨论造波板的运动圆频率、振幅和水深等对波浪传播和波浪特性的影响,并对波浪的非线性特性进行分析,研究发现造波板运动频率、运动振幅以及水深均将对波浪形态和波浪非线性产生显著影响。结果为真实水槽造波机的运动控制以及波浪生成试验提供了依据,便于实验室设置更合理的参数来准确模拟不同条件下的波浪。 相似文献
2.
数值水槽内的阻尼消波和波浪变形计算 总被引：11，自引：3，他引：8
采用时域内对波面运动位置追踪的边界元方法,建立了一种非线性波浪变形计算的三维数值模式,并借助Spongelayer阻尼消波和Sommerfeld放射条件相匹配的处理方式,开发了一条三维非线性波的数值造波水槽,进而对水槽内的Stokes波进行了波浪变形计算。 相似文献
3.
提出了一种新型内波造波方法——箱内垂荡板式造波。应用 FLUENT 软件的有限体积法,采用 k-ε两方程湍流模型封闭 RANS 方程作为求解控制方程,建立二维数值内波水槽。通过模仿物理造波机运动的数值模拟结果比较表明：箱内垂荡板式造波机生成的内波与理论解十分吻合,与双板联动式造波和平板拍击式造波相比,控制简单,对自由水面的扰动小,对水槽水深的变化和分层界面位置的改变适应性好,不会造成分层水体的掺混。 相似文献
4.
水槽中浅水非线性长波传播的 Boussinesq 数值模拟 总被引：1，自引：0，他引：1
浅水非线性长波传播变形中会产生波-波相互作用,为较好地模拟这种现象,在非交错网格下建立了近似在阶完全非线性的高阶 Boussinesq 数值模型.数值模型中采用了混合 4 阶 Adams- Bashforth -Moulton 格式和内部造波技术.数值计算了非线性长波在波浪水槽中的传播变形,计算结果与相关实验数据吻合较好,验证了该数值模型实用性. 相似文献
5.
当波浪由外海向跨海桥梁所在的近岸海域传播时,随着水深急剧变浅,波浪会发生破碎。强非线性的破碎波会给桥墩结构带来极大冲击作用。基于计算流体力学(CFD)数值软件Flow-3D建立三维数值水槽,造波边界设为斯托克斯五阶波。通过在数值水槽中建立逐渐浅化的三维地形,采用k-ω湍流模型求解雷诺平均N-S(RANS)方程,模拟破碎波冲击桥墩。与前人水槽试验及数值模拟结果进行比对,验证数值水槽的有效性。采用验证过的数值水槽,研究了不同入射波高和周期下的破碎波浪特性,计算了不同长宽比圆端形桥墩在不同入射波高的破碎波作用下受力和流场变化,讨论了最大压强作用点、准静态力和冲击力随桥墩长宽比的变化规律。研究表明:与前人试验和数值模拟相比,所建立的数值水槽具有较高精度;圆端形桥墩破波力随桥墩长宽比增大,先增大后趋于稳定,破波力峰值随着入射波高的增大而增大,同时,圆端形桥墩破波力峰值主要由冲击力控制。进行跨海桥梁圆端形桥墩设计时,应重点关注桥墩长宽比和破碎波冲击力的影响。 相似文献
6.
利用特征函数展开法对台阶式变深水槽中推板式造波机造波问题进行了研究，建立了相应速度势和波面的解析表达式。与高阶边界元方法(HOBEM)数值结果进行了对比，验证了本解析解的正确性。通过数值试验，研究了台阶对入射波的影响，同时分析了造波板所在位置（上部台阶）水深、水槽工作区（下部台阶）水深、造波板运动周期和造波板水平位置等因素对生成波浪高度的影响。由此选择合适的造波板所在位置及水深来得到所需要的波浪高度，进而根据需要生成波浪的周期和波幅 来反演造波板的运动。 相似文献
7.
基于势流理论和时域高阶边界元方法,建立了三维完全非线性数值波浪水槽模型.利用源造波法产生入射波浪,应用五阶斯托克斯波理论给定波浪速度;采用混合欧拉-拉格朗日方法追踪流体瞬时水面,将二阶泰勒级数展开法应用于更新下一时间步的波面和速度势;通过加速势的方法准确计算自由水面速度的法向导数和物面速度势的时间导数.对完全非线性波浪进行了模拟,得到了稳定的波形.当波浪非线性较小时,与四阶Runge- Kutta法(RK4)计算结果和五阶斯托克斯波理论解均吻合良好;随着波浪非线性的增大,计算结果误差逐渐增大.通过数值试验分析,在满足精度要求的基础上,本方法计算时间略大于四阶Runge- Kutta法的四分之一,大大减少了计算量. 相似文献
8.
9.
10.
《中国海洋大学学报(自然科学版)》2016,(10)
本文基于Navier-Stokes方程和连续性方程,利用VOF方法捕捉自由液面和松弛造波法实行造波,建立基于黏性流体理论的三维数值波浪水槽,并在该数值波浪水槽内对圆柱周围的波浪爬升效应进行数值模拟。选用两种不同的波浪参数,探讨波陡参数对柱体周围的波浪爬升效应及其所受载荷的影响。与势流模型相比,本文采用的黏性流模型可以较好的捕捉实验中出现的二次波峰现象。计算表明,本文建立的数值水槽可以较好用于直立圆柱波浪爬升问题的计算。 相似文献
11.
This study investigates the initialization of nonlinear free-surface simulations in a numerical wave flume.Due to the mismatch between the linear input wavemaker motion and the kinematics of fully nonlinear waves,direct numerical simulations of progressive waves,generated by a sinusoidally moving wavemaker,are prone to suffering from high-frequency wave instability unless the flow is given sufficient time to adjust.A time ramp is superimposed on the wavemaker motion at the start that allows nonlinear free-surface simulations to be initialized with linear input.The duration of the ramp is adjusted to test its efficiency for short waves and long waves.Numerical results show that the time ramp scheme is effiective to stabilize the wave instability at the start of the simulation in a wave flume. 相似文献
12.
A semi-analytical nonlinear wavemaker model is derived to predict the generation and propagation of transient nonlinear waves in a wave flume. The solution is very efficient and is achieved by applying eigenfunction expansions and FFT. The model is applied to study the effect of the wavemaker and its motion on the generation and propagation of nonlinear waves. The results indicate that the linear wavemaker theory may be applied to predict only the generation of waves of low steepness for which the nonlinear terms in the kinematic wavemaker boundary condition and free-surface boundary conditions are of secondary importance. For waves of moderate steepness and steep waves these nonlinear terms have substantial effects on wave profile and wave spectrum just after the wavemaker. A wave spectrum corresponding to a sinusoidally moving wavemaker possesses a multi-peak form with substantial nonlinear components, which disturbs or may even exclude physical modeling in wave flumes. The analysis shows that the widely recognized weakly nonlinear wavemaker theory may only be applied to describe the generation and propagation of waves of low steepness. This is subject to further restrictions in shallow and deep waters because the kinematic wavemaker boundary condition as well as the nonlinear interaction of wave components and the evolution of wave energy spectrum is not properly described by weakly nonlinear wavemaker theory. Laboratory experiments were conducted in a wave flume to verify the nonlinear wavemaker model. The comparisons show a reasonable agreement between predicted and measured free-surface elevation and the corresponding amplitudes of Fourier series. A reasonable agreement between theoretical results and experimental data is observed even for fairly steep waves. 相似文献
13.
Approximate Stream Function wavemaker theory for highly non-linear waves in wave flumes 总被引：1，自引：0，他引：1
An approximate Stream Function wavemaker theory for highly non-linear regular waves in flumes is presented. This theory is based on an ad hoc unified wave-generation method that combines linear fully dispersive wavemaker theory and wave generation for non-linear shallow water waves. This is done by applying a dispersion correction to the paddle position obtained for non-linear long waves. The method is validated by a number of wave flume experiments while comparing with results of linear wavemaker theory, second-order wavemaker theory and Cnoidal wavemaker theory within its range of application. 相似文献
14.
A deterministic combination of numerical and physical models for coastal waves is developed. In the combined model, a Boussinesq model MIKE 21 BW is applied for the numerical wave computations. A piston-type 2D or 3D wavemaker and the associated control system with active wave absorption provides the interface between the numerical and physical models. The link between numerical and physical models is given by an ad hoc unified wave generation theory which is devised in the study. This wave generation theory accounts for linear dispersion and shallow water non-linearity. Local wave phenomena (evanescent modes) near the wavemaker are taken into account. With this approach, the data transfer between the two models is thus on a deterministic level with detailed wave information transmitted along the wavemaker. 相似文献
15.
An improved coupling of numerical and physical models for simulating 2D wave propagation is developed in this paper. In the proposed model, an unstructured finite element model （FEM） based Boussinesq equations is applied for the numerical wave simulation, and a 2D piston-type wavemaker is used for the physical wave generation. An innovative scheme combining fourth-order Lagrange interpolation and Runge-Kutta scheme is described for solving the coupling equation. A Transfer function modulation method is presented to minimize the errors induced from the hydrodynamic invalidity of the coupling model and/or the mechanical capability of the wavemaker in area where nonlinearities or dispersion predominate. The overall performance and applicability of the coupling model has been experimentally validated by accounting for both regular and irregular waves and varying bathymetry. Experimental results show that the proposed numerical scheme and transfer function modulation method are efficient for the data transfer from the numerical model to the physical model up to a deterministic level. 相似文献
16.
17.
A two-dimensional numerical wave flume based on SA-MPLS method 总被引：1，自引：0，他引：1
A spatially adaptive(SA) two-dimensional(2-D) numerical wave flume is presented based on the quadtree mesh system,in which a new multiple particle level set(MPLS) method is proposed to solve the problem of interface tracking,in which common intersection may be traversed by multiple interfaces.By using the adaptive mesh technique and the MPLS method,mesh resolution is updated automatically with time according to flow characteristics in the modeling process with higher resolution around the free surface and the solid boundary and lower resolution in less important area.The model has good performance in saving computer memory and CPU time and is validated by computational examples of small amplitude wave,second-order Stokes wave and cnoidal wave.Computational results also indicate that standing wave and wave overtopping are also reasonably simulated by the model. 相似文献
18.
19.
The concept of candidate particle set is introduced in the MPS gridless numerical method to generate neighboring particle set matrix, which can reduce the CPU time to 1/11 of that before introduction. The Bi-CGSTAB (bi-conjugate gradient stabilized) algorithm is applied to solving the Poisson pressure equation, by which the solving speed is significantly accelerated. The process of solitary waves propagating over a numerical flume and interacting with a vertical wall is simulated. The simulated results of water surface elevation are in good agreement with the analytical solution as well as the measured data. The predicted maximum values of the run-up of solitary waves with various relative incident wave heights agree well with the measured results. 相似文献
20.
孤立波与带窄缝双箱相互作用模拟研究 总被引：1，自引：1，他引：0
针对孤立波与带窄缝双箱的作用问题,应用时域高阶边界元方法建立了二维数值水槽。其中,自由水面满足完全非线性运动学和动力学边界条件,对瞬时自由表面流体质点采用混合欧拉-拉格朗日法追踪,采用四阶龙格库塔法对下一时刻的自由水面的速度势和波面升高进行更新。采用加速度势法求解物体湿表面的瞬时波浪力。采用推板方法生成孤立波。通过模拟孤立波在直墙上的爬高以及施加在直墙上的波浪力,并与已发表的实验和数值结果对比,验证本数值模型的准确性。通过数值模拟计算研究了窄缝宽度、方箱尺寸对波浪在箱体迎浪侧爬高,窄缝内波面升高,箱体背浪侧透射波高及箱体受波浪荷载的影响。同时研究了有一定时间间隔的双孤立波与带窄缝双箱系统作用问题。 相似文献