共查询到19条相似文献，搜索用时 406 毫秒
1.
初始几何缺陷被认为是影响管道极限承载力和稳定性的重要因素,但是大部分的管道力学特性研究都没有考虑初始缺陷的影响。基于管道几何尺寸测量机,获得管道的壁厚和直径沿轴向以及环向的分布规律。据此建立了四个三维实体有限元模型,分别为完好管道模型、只考虑直径缺陷的管道模型、只考虑壁厚缺陷的管道模型以及考虑所有缺陷的管道模型。分析了初始缺陷对管道的极限内压承载力、极限轴力承载力和极限弯矩承载力的影响。结果表明,直径缺陷对管道的极限内压承载力影响较大;壁厚缺陷对管道在复杂荷载作用下的极限弯矩承载力影响较大。 相似文献
2.
腐蚀是管道常见的缺陷形式之一,会极大降低管道的压溃压力,同时深海环境下高静水外压易引发管道压溃失效,威胁管道的安全运行,因此准确预测管道压溃压力显得尤为重要。采用数值模拟方法研究了含腐蚀缺陷的高强钢厚壁管道压溃失效模式,分析了管材、管道径厚比、腐蚀深度、长度和宽度等参数对高强钢厚壁管道压溃压力的影响规律。分析结果表明:管道径厚比愈大,对厚壁管道的承压能力提升愈显著;腐蚀缺陷的存在对管道压溃压力具有减小作用;随着管道材料等级的提升,压溃压力有明显提高。提出了相应的压溃压力预测公式,为厚壁管道完整性评价提供了参考依据。 相似文献
3.
运行在恶劣环境中的海底管道,往往受到内压、轴力和弯矩等复杂荷载的联合作用。腐蚀会导致管壁局部变薄,降低管道极限承载力。为保证管道安全高效运行,准确预测和分析复杂荷载作用下的塑性极限承载力和变形行为就显得尤为重要。考虑大应变和大变形、应力强化和材料非线性,运用数值仿真软件建立腐蚀缺陷管道的三维实体有限元模型,在全尺寸管道破坏试验验证的基础上,对腐蚀管道在内压、轴向压力和弯矩相互作用下的失效模式和极限弯矩承载力进行了相关研究,并进行了腐蚀缺陷几何参数的敏感性分析。研究结果表明:初始内压和初始轴向压力会显著降低腐蚀管道的极限弯矩承载力,并且影响最终的失效模式;在腐蚀缺陷几何尺寸参数中,腐蚀宽度比腐蚀深度和腐蚀长度的影响更大。 相似文献
4.
5.
未埋设的海底管道在高温高压运行条件下可能发生侧向屈曲，情况严重时影响海底管道的结构安全。侧向屈曲临界力作为判定海底管道发生侧向屈曲的重要依据，主要影响因素有初始缺陷、管土相互作用等。现有关于侧向屈曲临界力的公式并未考虑管土相互作用、缺陷不平直度和管道自身材料特性对侧向屈曲临界力的综合影响。建立含有通用几何初始缺陷海底管道的数值模型，使用Riks算法进行参数分析以研究极限侧向土壤阻力、管道缺陷不平直度和截面几何尺寸对海底管道侧向屈曲的具体影响。基于量纲分析法和多元线性回归，推导出海底管道侧向屈曲临界力关于上述3个影响参数的一般公式，并对该公式进行了检验，结果表明文中推导的公式在参数涵盖的研究范围内有效。 相似文献
6.
含有腐蚀缺陷海底管道极限载荷分析 总被引：8，自引：0，他引：8
利用有限元弹塑性分析方法,对含有腐蚀缺陷的海底管道进行材料非线性和几何非线性分析,探讨了确定管道极限载荷的准则。在此基础上,给出含有腐蚀缺陷的海底管道的极限载荷,研究腐蚀长度、深度和宽度对海底管道极限载荷的影响,提出了含有腐蚀缺陷的受内压的海底管道的极限载荷计算公式,并与试验结果进行了比较,证明该方法是有效的。 相似文献
7.
为探究轴压作用下双金属复合海底管道的组合作用与承载性能,对双金属复合海底管道进行了试验研究和理论分析。开展了不锈钢衬管材料性能试验,对比了国际主流不锈钢本构关系模型和试验结果。利用ABAQUS建立了精细化的双金属复合管道轴压试验有限元模型,系统研究了关键参数如复合工艺产生的环向复合应力、钢管初始缺陷幅值等对双金属复合管在轴压作用下力学性能的影响规律。通过对比已有轴压双金属复合管道试验结果,验证有限元模型。基于验证的有限元模型,对轴压作用下双金属复合管道的组合作用以及径厚比和材料强度对承载力的影响进行了分析。结果表明双金属复合管道的轴压极限承载力主要取决于基管的截面屈服荷载,并随着管径和材料强度的提高而增大。并依据分析结果对双金属复合海底管道的设计提出建议。 相似文献
8.
椭圆度-凹坑双缺陷海底管道局部屈曲特性研究 总被引：2，自引：1，他引：1
海底管道在制造、埋设以及使用过程中极易产生椭圆度-凹坑双缺陷,双缺陷影响管道局部屈曲,对含椭圆度-凹坑双缺陷海底管道的局部屈曲特性研究十分必要。现行规范中采用等效椭圆度对含椭圆度-凹坑海底管道进行评估,该方法无法准确评估不同缺陷形式的屈曲特性。采用形状系数对含椭圆度-凹坑双缺陷的海底管道进行评估,运用有限元软件ABAQUS进行数值模拟,并进行试验验证。在此基础上对含有不同凹坑深度、不同椭圆度的海底管道进行局部屈曲的数值模拟,计算不同形状椭圆度、含有不同凹坑深度海底管道的形状系数,对其进行敏感性分析。计算结果表明:形状系数对海底管道椭圆度、凹坑深度、径厚比敏感性较强;对凹坑宽度敏感性较弱。 相似文献
9.
针对深海管道在侧向静水压条件下发生局部屈曲压溃的情况,研究了关于管道前屈曲阶段变形响应和压溃压力的计算方法。假定管道前屈曲阶段发生沿轴向均匀一致的椭圆度变形,建立基于圆环的力学模型,考虑几何大变形和材料的弹塑性本构关系,利用虚功原理建立平衡方程。通过选用合适的位移离散函数对方程组数值离散,并利用牛顿法进行数值求解,得到含椭圆度缺陷的管道截面的变形响应和压溃压力。通过试验、有限元分析和规范对理论计算结果进行了对比验证,证明该方法精度可靠,与事实吻合。最后,计算了初始椭圆度缺陷对不同径厚比管道的压溃压力的影响。 相似文献
10.
根据矿石输送软管挠度变化很大的特点,采用了几何非线性有限元理论对输送系统进行力学分析;根据输送管道在采矿船和采矿车的牵引下运动,同时受到管道和管内流体重力、浮力和海水阻力作用的情况,采用有限元对输送系统进行了计算分析。从计算结果的比较分析可知,在输送管道下端安装浮体,得到了一种十分理想的采矿系统;采矿车牵引输送管道运动时,海水对管道产生很大的阻力,海水阻力对管道两端结点反力和管道形状影响都很大。 相似文献
11.
双拱初始缺陷海底管线水平向整体屈曲数值模拟分析 总被引：1，自引：0，他引：1
为了研究具有双拱反对称初始缺陷海底管线的整体屈曲特性,采用模态分析法将最可能出现的缺陷形态引入数值分析模型中。针对管线在高温高压作用下发生整体屈曲的动态变形特征,运用显式动力数值模拟方法研究了管线整体屈曲过程中水平向变形与轴向变形随温度和内压的变化规律,建立了在整体屈曲过程中屈曲管段与滑动管段轴力的变化过程与初始缺陷形态的关系。将数值模拟结果同经典解析解和室内模型实验结果进行对比,验证了本方法的可靠性。工程算例的分析结果表明,管线整体屈曲的发生是一个由低阶向高阶发展的过程,具有双拱缺陷的管线首先发生二阶模态的整体屈曲,而后过渡到四阶模态;管线整体屈曲的变形包括屈曲段的水平向变形和滑动管段的轴向缩进,其中水平变形释放了管壁内的轴力,轴力的释放量随初始缺陷尖锐程度的降低而增大;轴向缩进变形由于受到地基土的摩阻力使滑动管段内的轴力发生累积,轴力的累积量随初始缺陷的尖锐程度的降低而增加。以上研究成果对指导实际工程具有现实意义。 相似文献
12.
线弹性土壤中埋设悬跨管道的弯曲和振动特性 总被引：1，自引：0，他引：1
利用细长梁小挠度理论,研究给出了两端埋设在线弹性土壤中的悬跨段管道和埋设段管道在自重作用下的变形和内力公式。基于静挠度公式,用能量法给出了第一阶弯曲振动的固有频率公式。讨论了不同土壤刚度条件下悬跨段管道的变形和内力特征,以及第一阶弯曲振动固有频率,并和工程上推荐使用的简支梁和两端固支梁的静动态特性进行比较。研究表明在跨度大、土壤刚度大、管道弯曲刚度较小时无量纲土壤刚度系数较大,埋设段管道对悬跨段管道的刚度约束比较大,悬跨段管道可以近似按两端固支梁模型来模拟;反之,只有在土壤刚度系数较小的几个参数点上,悬跨管道的静动力特性等价于简支梁模型。 相似文献
13.
Offshore oil and gas exploration are gradually heading toward the deep sea and even the ultra-deep sea. According, the working temperature and pressure intensity of subsea oil and gas pipelines have increased by a considerable degree. This situation is accompanied by the global buckling problem in deep sea pipelines, which has become increasingly common. Meanwhile, ordinary single-layer pipelines cannot last for a long time under harsh deep-sea working conditions. Thus, multilayer pipelines, such as the pipe-in-pipe (PIP) structure and bundled pipelines, have gradually become top choices. However, the global buckling mechanisms of these multilayer pipelines are more complicated than those of single-layer pipelines. The sleeper–snake lay pipeline, which is an active control method for global buckling, was used in this study. The change and development laws of global buckling in a PIP structure at different wavelengths and amplitudes were determined through an experimental study. A dynamic solution method that considers artificial damping was adopted to establish finite element global buckling models of a PIP structure with initial imperfections. The effects of various factors, such as pipeline laying shape, sleeper–pipe function, and seabed–pipe function, on global buckling were analyzed. By the result of finite element method analysis, the initial imperfection, and sleeper–pipeline friction were determined to be the key factors that influenced critical pipeline buckling force. Accordingly, a reference for the design of PIP structures is presented. 相似文献
14.
1 .IntroductionThe lifting systemis composed of pipes andtheir connectors .It is not onlythe lifting channel formanganese nodule betweenthe miningship andintermediate bin,but alsothe supporting massfor deepsea miningequipment and cables .Sothe reliability… 相似文献
15.
The present paper is concerned with determining the effect of thickness variation on collapse pressure of seamless pipes. There exists extensive information on the effects external pressure has on pipelines. A substantial amount of literature deals with results of analysis, numerical modelling and testing of pipes those are gradually subject to external pressure. This knowledge has been incorporated into standards which are intended for designing linepipe operating in deepwater locations. One such example is the DNV-OS-101 (DNV, 2007) Submarine Pipeline Systems standard. This code only addresses pipes with a nominally uniform wall thickness making it inadequate for designing seamless pipe which is prone to thickness variation arising from the manufacturing process. The DNV (2007) code effectively ignores the problem as it simply provides a vague statement regarding a conservative value of wall thickness that should be used in the design calculations.The present paper uses finite element analysis (FAE) modelling to predict the external pressure acting on the pipes. The present paper explains the manner in which FEA models will be used to study the effect wall thickness variation will have on the pressure at which the pipe will collapse. An improvement to the DNV (2007) code is then suggested by interpreting the results of the FEA models. The case study that follows provides insight on the savings the improved method is projected to offer. 相似文献
16.
17.
In the present study, we simulated the reel-lay installation process of deepwater steel catenary risers（SCRs） using the finite element method and proposed multiaxial fatigue analysis for reeled SCRs. The reel-lay method is one of the most efficient and economical pipeline installation methods. However, material properties of reeled risers may change, especially in the weld zone, which can affect the fatigue performance. Applying finite element analysis（FEA）, we simulated an installation load history through the reel, aligner, and straightener and analyzed the property variations. The impact of weld defects during the installation process, lack of penetration and lack of fusion, was also discussed. Based on the FEA results, we used the Brown-Miller criterion combined with the critical plane approach to predict the fatigue life of reeled and non-reeled models. The results indicated that a weld defect has a significant influence on the material properties of a riser, and the reel-lay method can significantly reduce the fatigue life of SCRs. The analysis conclusion can help designers understand the mechanical performance of welds during reel-lay installation. 相似文献
18.
In the present study, we simulated the reel-lay installation process of deepwater steel catenary risers (SCRs) using the finite element method and proposed multiaxial fatigue analysis for reeled SCRs. The reel-lay method is one of the most efficient and economical pipeline installation methods. However, material properties of reeled risers may change, especially in the weld zone, which can affect the fatigue performance. Applying finite element analysis (FEA), we simulated an installation load history through the reel, aligner, and straightener and analyzed the property variations. The impact of weld defects during the installation process, lack of penetration and lack of fusion, was also discussed. Based on the FEA results, we used the Brown-Miller criterion combined with the critical plane approach to predict the fatigue life of reeled and non-reeled models. The results indicated that a weld defect has a significant influence on the material properties of a riser, and the reel-lay method can significantly reduce the fatigue life of SCRs. The analysis conclusion can help designers understand the mechanical performance of welds during reel-lay installation. 相似文献
19.
管内流动会影响输流管的振动响应,目前关于输流弹性管涡激振动方面的研究较少。基于计算流体力学(CFD)方法,开展内外流对细长输流弹性管振动特性影响的研究。首先在不考虑内流的情况下将弹性管涡激振动数值预报结果与模型试验数据进行对比,验证了数值方法的可靠性。再者考虑内外流耦合作用情况下,对不同内流流速下细长输流弹性管振动位移时—空分布、顺流向最大平均偏移、振动轨迹、内部横向涡的形成与分布等进行了对比分析。结果发现,与外流流速相比,内流流速的增加虽然难以改变弹性管的主振模态,但对沿管体的振动强度影响显著。顺流向最大偏移处管体运动轨迹发生明显的变形和跳跃。在剪切外流和均匀内流对弹性管的联合作用下,沿管跨方向模态间能量转换频繁,伴随着间歇性出现或消失的沿弹性管传播的行波组分,这主要归因于复杂的双重流固耦合系统(外流—管体,内流—管体)。在内流以附加质量力、离心力和科氏力形式的激励下,弹性管内二次流现象明显。在振动过程中,内部横向涡沿管壁生成、脱落并逐渐散布于整个横截面。 相似文献