共查询到20条相似文献，搜索用时 15 毫秒
1.
B. Giridhar Rajesh 《Marine Georesources & Geotechnology》2017,35(7):930-938
The sparsity of examination of seismic passive earth pressure acting on retaining wall holding soil backfill with full submergence, which is more common in waterfront areas, can be noticed from the literature. In the current study, a closed-form solution to compute the seismic passive earth pressure on nonvertical rigid retaining wall retaining a backfill with full submergence is proposed using the modified pseudo-dynamic approach. A nonlinear rupture surface (logarithmic spiral?+?straight line) in a submerged backfill of viscoelastic nature has been assumed. The presented modified pseudo-dynamic method overcomes the limitations of the existing pseudo-dynamic method for submerged soils. The proposed methodology has been thoroughly validated with the available literature. The influences of seismic acceleration coefficients, excess pore water pressure ratio, wall inclination, and soil and wall friction angles have been studied. It has been noticed that the consideration of excess pore pressure ratio leads to significant decrease in seismic passive resistance of the soil which in turn lead to extra hydraulic pressure acting on the wall in submerged backfill. There is a 57% decrease in seismic passive earth pressure coefficient as the wall inclination changes from ?15° to 15°. 相似文献
2.
Jun-Jie Wang Hui-Ping Zhang Ming-Wei Liu Ye-Ying Chen 《Marine Georesources & Geotechnology》2013,31(1):86-101
The authors deal with the computing seismic passive earth pressure acting on a vertical rigid wall. The wall is provided with a drainage system along soil-structure interface and retains the cohesionless backfill subjected to water seepage. A general solution for the seismic passive earth pressure is presented. The solution is based on Coulomb's theory wherein seismic forces are assumed to be pseudostatic. The solution considers the pore water pressures induced by water seepage and earthquake shaking. Some important parameters are included in the solution. The parameters are the soil effective internal friction angle, wall friction, soil unit weight, and horizontal and vertical seismic acceleration coefficients. The comparison of the total seismic passive earth pressure in horizontal direction from the present method with published works indicates that the present method may be reasonable. The variations of the passive earth pressure coefficient with the soil effective internal friction angle are investigated for different wall friction angles and seismic forces. The effect of the water seepage on the seismic passive earth pressure is also investigated. 相似文献
3.
By using the modified pseudo-dynamic method for submerged soils this paper explores the seismic stability of seawall for the active condition of earth pressure. Different forces such as seismic active earth pressure, seismic inertia forces of the wall, non-breaking wave pressure, hydrostatic and hydrodynamic pressures are considered in the stability analysis. Limit equilibrium has been used, and expressions for the factor of safety against sliding and overturning mode of failure have been proposed. The proposed methodology overcomes the limitations of existing pseudo-dynamic method for submerged soils. A detailed parametric study has been conducted by varying different parameters and results are presented in the form of design charts for computation of factor of safety against sliding and overturning mode of failures. It was noticed that the influences of soil friction angle, seismic acceleration coefficient, wall inclination and excess pore pressure are significant when compared to the other parameters. The value of factor of safety against the sliding mode of failure is increasing by about 62% when the value of soil frictional angle is increased from 30° to 40°. It was also found that the factor of safety against overturning mode of failure is decreasing by about 22% as the value of excess pore pressure ratio increases from 0 to 0.75. The proposed method with closed-form solutions can be used for the seismic design of seawalls. 相似文献
4.
《Applied Ocean Research》2007,29(1-2):37-44
The paper pertains to a study of analysing a waterfront retaining wall under the combined action of tsunami and earthquake forces. The stability of the waterfront retaining wall is assessed in terms of its sliding and overturning modes of failure. Pseudo-static approach has been used for the calculation of the passive seismic earth pressure. Hydrodynamic pressure generated behind the backfill due to shaking of the wet backfill soil is considered in the analysis. Tsunami force is considered to be an additional force acting on the upstream face of the wall and is calculated using a simple formula. It is observed that the factor of safety in sliding mode of failure decreases by about 70% when the ratio of tsunami water height to initial water height is changed from 0.375 to 1.125. Variations of different parameters involved in the analysis suggest sensitiveness of the factor of safety against both the sliding and overturning modes of failure of the wall and provides a better guideline for design. 相似文献
5.
This study was conducted to determine the stability of a quay wall under the combined action of an earthquake and tsunami. Adopting the limit equilibrium method, the stability of the quay wall was assessed for both the sliding and overturning modes under passive and active conditions. The variation in the stability of the quay wall was determined by parametric studies, including those for the tsunami wave height, seismic acceleration coefficient, internal friction angle of soil, wall friction angle, and pore water pressure ratio. The stability of the wall was also compared with the case of no earthquake and tsunami forces. When the earthquake and tsunami were considered simultaneously, the stability of the wall under the passive condition decreased significantly. The critical mode of the quay wall under the earthquake and tsunami forces was found to be that of the overturning mode. In the active condition, the safety factors for sliding and overturning increased, because the tsunami acted as a resisting force. However, it should be noted that, if a tsunami wave spills over the quay wall and then flows backward to the wall active condition, the tsunami no longer acts as a resisting force. 相似文献
6.
Waterfront retaining walls supporting dry backfill are subjected to hydrostatic pressure on upstream face and earth pressure on the downstream face. Under seismic conditions, if such a wall retains a submerged backfill, additional hydrodynamic pressures are generated. This paper pertains to a study in which the effect of earthquakes along with the hydrodynamic pressure including inertial forces on such a retaining wall is observed. The hydrodynamic pressure is calculated using Westergaard's approach, while the earth pressure is calculated using Mononobe-Okabe's pseudo-static analysis. It is observed that when the horizontal seismic acceleration coefficient is increased from 0 to 0.2, there is a 57% decrease in the factor of safety of the retaining wall in sliding mode. For investigating the effect of different parameters, a parametric study is also done. It is observed that if φ is increased from 30° to 35°, there is an increase in the factor of safety in the sliding mode by 20.4%. Similar observations were made for other parameters as well. Comparison of results obtained from the present approach with [Ebeling, R.M., Morrison Jr, E.E., 1992. The seismic design of waterfront retaining structures. US Army Technical Report ITL-92-11. Washington DC] reveal that the factor of safety for static condition (kh=0), calculated by both the approaches, is 1.60 while for an earthquake with kh=0.2, they differ by 22.5% due to the consideration of wall inertia in the present study. 相似文献
7.
The reliability and/or stability of the lifeline structures against failure under seismic loads are of critical concern, and must be studied carefully. Therefore, the main objective of this paper is to demonstrate the commonly encountered backfill effects on the dynamic response of rectangular tanks. However, only the exterior wall of the tank which interacts with both the backfill and fluid is tackled, as each part of the structure shows considerable differences in terms of both the load bearing mechanisms and the geometrical and positional differences. Finite element analyses are employed, taking into consideration the fluid-wall-backfill interaction. The analyses are conducted to observe whether or not both backfill and wall behavior can be affected by variation of the internal friction angle. For that purpose, some comparisons are made on vertical displacements of the backfill, roof displacements, stress responses, etc., by means of internal friction angle variations of the backfill from 25° to 40°. Consequently, it is observed that the variations on maximum vertical displacements are affected considerably. In contrast, the maximum stress responses are affected partially. However, the inertial effects of the backfill show that pseudo-static approximations may be insufficient to understand the dynamic behavior of the backfill-wall-fluid system. 相似文献
8.
Block type quay walls are one of the most generally used type of gravity quay walls however seismic risks of this kind of structures have not already received the proper amount of attention. In this study, stability of block type quay wall which consists of two concrete blocks is investigated experimentally and numerically. 1 g shaking table tests are used for experimental study. Model scale is 1/10 and model is placed on rigid bed to ignore damage due to foundation deformation. Two different granular materials (Soil 1 and Soil 2) which have different nominal diameters are used as backfill materials to understand the effect of nominal diameters on structure's stability. During the experiments accelerations, pore pressures, soil pressures and displacements are measured for two blocks under different cycling loadings. Soil pressure test results are presented in non-fluctuating and fluctuating components to determine the distribution and application point of the fluctuating component on two blocks. By using experiment results, the friction coefficients between the rubble-block and block-block are determined and compared with recommended friction coefficients in standards. PLAXIS V8.2 software program is used for numerical study to determine the material properties. 相似文献
9.
10.
沉箱式防波堤静力与动力稳定性设计体型分析 总被引：2，自引：0，他引：2
将沉箱式防波堤滑移和倾覆稳定性设计方法分为三类：静力设计方法、不允许沉箱出现滑移和摇摆角的动力设计方法、控制沉箱滑移量和摇摆角的动力设计方法。建立了满足给定抗滑和抗倾安全系数条件下，按静力设计方法确定沉箱尺度的控制方程，研究了波浪条件和安全系数取值对沉箱长宽比的影响。通过动力数值计算分析了沉箱长宽比对沉箱滑移量和摇摆角的影响，并与传统静力设计理论进行了比较，讨论了控制沉箱滑移量和摇摆角的动力设计方法的可行性。 相似文献
11.
针对现阶段深水软黏土地基防波堤建设的设计理论和稳定性分析方法尚不成熟,结合实际工程,采用三维弹塑性有限元数值分析方法,研究在水平或竖直单一方向荷载以及复合加载条件下软黏土地基上沉箱防波堤的失稳模式,提出破坏包络线的稳定性判别方法。在波浪水平荷载作用下,深水软基上沉箱防波堤发生倾覆失稳破坏,失稳转动点为沉箱底面以下中轴线偏右的某点,不同于规范中规定的岩石或砂质地基沉箱倾覆转动点为其后踵点;在重力等竖向荷载作用下,沉箱的失稳模式为结构整体下陷,抛石基床及地基形成连贯的塑性区域,呈现较明显地冲剪破坏形式;在水平、竖向复合荷载作用下,软基上沉箱防波堤的破坏包络线由结构倾覆破坏线和地基承载力破坏线组成,包络线将荷载组合区分成稳定区、仅发生水平承载力不足倾覆破坏区、仅发生地基竖向承载力不足破坏区、同时发生水平承载力和地基竖向承载力不足破坏区4个区域。研究成果为深水软基沉箱防波堤建设提供参考和借鉴。 相似文献
12.
A simplified method to determine the minimum length of reinforcement required for the external stability of waterfront reinforced soil structures under seismic conditions is presented. In the present analysis, strain-dependent dynamic properties (shear modulus and damping ratio) are used. The results obtained from the present method are well compared with the results of pseudo-static method of analysis. For the set of input parameters, the estimated minimum length of reinforcement required against sliding failure is nearly 27–29% higher for an input normalized frequency of 1.06 and is nearly 22–25% lower for another input normalized frequency of 1.94 when compared with the results of pseudo-static approach. This can be attributed to the mode change behaviour of the waterfront structure. In addition, the effect of foundation type on the external stability of waterfront reinforced soil structures has also been presented and it is found that the foundation type has a significant effect on the same. For the given set of input parameters, the length of minimum reinforcement required for a slope and vertical wall having a flexible foundation are about 26–28% and 32–38% larger than that of a slope and vertical wall with rigid foundation, respectively. 相似文献
13.
Drag anchor is a widely used anchor type in offshore engineering for the mooring system. The prediction of the anchor trajectory installation and the final position is important for anchor selection in design. The existing method using yield envelope method for trajectory prediction ignored the shallow anchor behavior but applied the deep yield envelope from a deeply embedded horizontal fluke in uniform clay for the whole drag-in installation process. However, the anchor fluke embedment depth and inclination angle change continually during installation in clay with linearly increasing shear strength soil profile in practice. Studies on the effect of fluke inclination angle on the anchor behavior in clay with such non-uniform soil profile under unidirectional and combined loading are important and necessary for the improvement of the yield envelope method to ensure a reasonable prediction. The current 2D finite element studies investigate the anchor behavior for inclined fluke in clay with linearly increasing shear strength under unidirectional vertical, horizontal and rotational loadings first. Then the effects of the fluke inclination angle, soil non-homogeneity and embedment depth ratio on the shallow yield envelopes are investigated. It is found that the effect of fluke inclination angle on the vertical capacity factors for anchor in clay with non-uniform and uniform soil profile is largely different. The resultant large impact on the yield envelopes shown here illustrates the importance of considering the fluke inclination angle and soil non-homogeneity in the prediction of anchor trajectory using yield envelope method. 相似文献
14.
The large-diameter cylinder structure, which is made of large successive bottomless cylinders placed on foundation bed or partly driven into soil, is a recently developed retaining structure in China. It can be used in port, coastal and off-shore works. The method for stability analysis of the large-diameter cylinder structure, especially for stability analysis of the embedded large-diameter cylinder structure, is an important issue. In this paper, an idea is presented that is, em-bedded large-diameter cylinder quays can be divided into two types, i.e. the gravity wall type and the cylinder pile wall type. A method for stability analysis of the large-diameter cylinder quay of the cylinder pile wall type is developed and a method for stability analysis of the large-diameter cylinder quay of the gravity wall type is also proposed. The effect of sig-nificant parameters on the stability of the large-diameter cylinder quay of the cylinder pile wall type is investigated through numerical calculation. 相似文献
15.
C. J. Garrison 《Applied Ocean Research》1989,11(4):194-201
It is common practice to compute wave-induced loads on the immersed surface of gravity structures exposed to the wave motion and disregard the pore-water pressure variation on the foundation surface. However, when the soil is porous, wave-induced pressures propagate within the soil under the structure and result in a rather significant contribution to overall loads. This paper describes a practical method for numerical modeling of the pore pressure under a gravity platform foundation for compressible water and a rigid, but porous soil. The porous soil may be bounded by an impermeable horizontal layer at some arbitrary depth.
The paper outlines the basic boundary element procedure for pore pressure analysis and presents numerical results for a typical gravity structure as well as results for comparison with an existing analytical solution for a vertical circular cylinder. 相似文献
16.
基于UDF的水平轴潮流能水轮机被动旋转水动力性能研究 总被引：1，自引：1，他引：0
针对水平轴潮流能水轮机被动旋转问题,基于Fluent 17.0,运用UDF(User Defined Function)控制滑移网格对网格进行动态调整,仿真研究水轮机在不同安放角下被动旋转的水动力特性。通过仿真分析,结果表明:潮流能水轮机随着叶片安放角度的增加,尖速比、输出功率、捕能系数都是先增大后减小,叶片安放角为6°时,叶轮前后速度差最大,对潮流能利用充分,且各项性能均达到最佳;通过分析叶片受力,叶尖叶素在安放角为2°时阻力最大,3°时升力最大,升阻比在6°时最大,此时叶尖叶素升阻比C_L/C_D=6.27、攻角α=3.06°。由仿真结果可知水平轴潮流能叶轮的自启动过程由5个阶段组成,即加速度增大的加速运动段—加速度减小的加速运动段—加速度反向增大的减速运动段—加速度反向减小的减速运动段—稳定运行段,这对潮流能水轮机的设计具有重要的指导意义。 相似文献
17.
Structural Types of Sea Embankment and Their Stability Analysis 总被引：1，自引：0，他引：1
MAO Changxi DUAN Xiangbao MAO Peiyu Prof. Senior Engineer Hydraulic Engineering Department Nanjing Hydraulic Research Institute 《中国海洋工程》1998,(3)
In this paper based on investigation on the structural types of sea embankments in thesoutheast coastal area of China,as well as the related tidal stages,waves and strength of marine soils,thefinite element method(FEM)calculations for seepage flow stability,including the overall stability againstsliding and local stability of sloping surface under the action of tidal stage and waves are carried out.Acomparison of the computational results of FEM for single circular slip,composite circular slip andgeogrid reinforcement against sliding shows that for calculation of stability against sliding of marine softsoil foundation it is even more reasonable to use the composite circular slip.The stability of sloping typesea embankment against sliding is slightly better than that of the vertical face type;for the combination ofthree defences(wave,scour and seepage defences)the sea embankment structural type of a compositecross section with a platform should be a good one,but it still should be suitable to local condit 相似文献
18.
This study focuses on non-linear seismic response of concrete gravity quay-wall structures subjected to near-fault ground motions, a subject which seems not to have received much attention in the literature. A two-dimensional coupled fluid-structure-soil finite element modelling is employed to obtain the quay-wall response. The seawater medium is represented by acoustic type, potential based fluid elements. The elasto-plastic behavior of the soil medium is idealized using Drucker-Prager yield criterion based on associated flow rule assumption. Four nodded plane strain elements are used to model the concrete wall, foundation, subsoil, backfill and seabed zones. Fluid Structure Interface (FSI) elements are considered between the seawater interfaces with the quay-wall and the seabed. Frictional contact elements are employed between the wall and soil interfaces. The numerical model is validated using field measurements available for permanent drifts in a quay-wall damaged during Kobe earthquake. Reasonable agreements are obtained between the model predictions and the field measurements. Non-linear seismic analyses of the selected quay-wall subjected to both near-fault and far-fault ground motions are performed. An incremental dynamic analysis approach (IDA) is used. In general, at least for models examined in the current study, the gravity quay-walls are found to be more vulnerable to near-field, in comparison with the corresponding far-field, earthquakes. 相似文献
19.
为满足强潮高浊度海域海底观测网布设需求,以潮动力强、泥沙浓度高的舟山群岛螺头水道为例,研究坐底结构物的稳定性。对3种形状的观测网坐底混凝土结构体进行计算分析,结果表明3种结构体抗滑安全系数2.22~7.40,抗倾覆安全系数1.59~1.64,沉降14.32~43.60 mm,地基承载力符合规范要求。针对冲刷可能导致的结构倾斜,建立结构体泥沙冲淤三维数值模型,分析了3种结构体的局部微流场与底床冲淤特性。模型结果表明,3种观测网坐底结构体在强潮流高浊度海域中符合稳定性要求,其中圆台结构体的稳定性最好。 相似文献
20.
波致海底缓倾角无限坡滑动稳定性计算分析探讨 总被引：1，自引：1，他引：0
波浪作用下海底无限坡滑动稳定性计算的极限平衡法中,忽略了坡体水平向应力状态的影响,为此,针对波浪作用下海底缓倾角无限边坡的特点,提出直接基于滑动面处土体应力状态的滑动稳定性计算方法(简称应力状态法),并分析了其适用范围。对具体算例的分析表明,应力状态法计算得出的安全系数大于极限平衡法的安全系数,且随着滑动面深度的增加、土体泊松比以及边坡坡角的增大,两种计算方法得出的安全系数的差异会逐渐增大;对于波浪作用下的海底缓倾角无限边坡,在失稳时极可能沿具有一定厚度的滑动带而不是单一的滑动面而滑动,且波致最大剪应力所在的深度,常常不是斜坡体最易失稳滑移的深度。 相似文献