共查询到13条相似文献，搜索用时 78 毫秒
1.
导管架下水驳船摇臂是安装在驳船尾部用于导管架滑移下水的过渡装置。分析导管架下水后,驳船、摇臂运动特点的基础上,建立描述导管架下水后驳船-摇臂耦合系统运动的变系数微分方程,给出基于改进的龙格库塔法的数值求解方法。以一艘3万吨下水驳船在1.6万吨导管架实施下水后摇臂翻转运动为实例,对导管架下水后驳船及摇臂翻转运动状态进行了计算,并将计算结果与水池试验结果进行了对比。讨论影响摇臂翻转运动的主要因素,提出导管架与摇臂完全脱离时刻,驳船的吃水、纵倾角度以及摇臂纵倾角度、摇臂重心纵向位置对摇臂能否自动翻转复位以及复位时摇臂角速度影响较大。 相似文献
2.
3.
12月22日11时30分，“南海一号”在广东省阳江成功出水，28日下午“南海一号”这个庞然大物终于成功进入了已经等待它多时的“水晶宫”，接下来便是长时间的考古工作。“南海一号”古沉船的整体打捞工作分为六个重要阶段，分别是：下放沉井、水下穿梁、沉箱起吊、沉箱起浮、驳船拖航、停靠上岸和博物馆内的水下考古。至此，深埋在海底800余年的“南海一号”终于重出海面，等待它的将是对历史漫长的考证。 相似文献
4.
新型双船起重拆除平台试验研究 总被引：1，自引：1，他引：0
拆除大型海上结构物是一项非常复杂且充满挑战的工程。现提出一种新型海上平台拆除方案,该方案利用三条半潜船来代替具有重型起重装置的单一船舶,通过两艘相同的半潜船将平台上层建筑托起,随后运至第三艘半潜船上完成平台拆除。在风浪流作用下,半潜船和平台的所处方位和运动姿态一直处于动态变化中,这对船舶调节压载的稳定性以及双船运动的同步性提出了要求。为了确保该方案的高效性和安全性,设计了一套完整的模型试验装置,包括船舶模型、平台拆卸辅助设备、六自由度运动采集与分析系统、控制系统、无线通讯系统以及测量系统。开展了相应的水池试验,试验结果验证了双船起重拆除平台方案中双船协同运输这一关键环节的可行性和安全性。 相似文献
5.
The dynamic factor is the ratio of the maximum dynamic load to the static load acting on the wire ropes between the boom of a floating crane and a cargo. In this paper, the dynamic factor is analyzed based on dynamic simulations of a floating crane and a cargo, considering an elastic boom. For the simulation, we designed a multibody system that consists of a floating crane barge, an elastic boom, and a cargo connected to the boom through wire ropes. The dynamic equations of motion of the system are based on flexible multibody system dynamics. Six-degree-of-freedom motions are considered for the floating crane and for the cargo, and three-dimensional deformations for the elastic boom. The hydrostatic force, the hydrodynamic force, the gravitational force, and the wire rope forces are considered as external forces. The dynamic factor is obtained by numerically solving the equation. The effects of the elastic boom on heavy cargo lifting are discussed by comparing the simulation results of an elastic boom and a rigid boom. 相似文献
6.
A bucket wheel dredge (BWD) for offshore tin mining is part of the long term plan of PT Timah Tbk to identify new dredging technologies for mining in greater than 50 m water depths. Measured tin-ore physical properties are used in a new BWD computer model to investigate deep water tin mining. The model simulates the cutting and hydraulic transport of submerged tin-ore. The results show that hydraulic tin mining beyond water depths of 50 m is feasible. It is best to employ hydraulic transport for lifting the tin-ore from the ocean floor to the surface and to use barges to transport the tin-ore to land processing plants. 相似文献
7.
S. Surendran 《Ocean Engineering》2000,27(6):1140
Handling of heavy structures demand unusual crane capacity. Availability of such cranes may be limited in developing countries. An innovative way to construct and launch heavy concrete structures in a developing country, where crane availability is rare, to lift, transport and handle heavy structures, is discussed in this paper. Heavy caissons are used in the marine environment as breakwaters, as berthing facilities for vessels, as gravity structures to absorb energy from waves, etc. The methodology for constructing multi-caissons on-board a barge and then on-board a floating dock is the subject of this paper. The respective feasibilities are discussed.The free floating condition of the caisson and its righting arm stability are described. At first the caisson was considered as its lip wall opened to the sea. The case of lip wall closed for more buoyancy is also considered. The stability of the barge and floating docks is shown for various stages of completion of construction. After investigating many factors, a safe procedure for construction and launching thereafter is described in this paper. The problem of handling a heavy concrete structure from the view point of a naval architect is highlighted. 相似文献
8.
A three-dimensional general mathematical hydroelastic model dealing with the problem of wave interaction with a floating and a submerged flexible structure is developed based on small amplitude wave theory and linear structural response. The horizontal floating and submerged flexible structures are modelled with a thin plate theory. The linearized long wave equations based on shallow water approximations are derived and results are compared. Three-dimensional Green’s functions are derived using fundamental source potentials in water of finite and infinite depths. The expansion formulae associated with orthogonal mode-coupling relations are derived based on the application of Fourier transform in finite and infinite depths in case of finite width in three-dimensions. The usefulness of the expansion formula is demonstrated by analysing a physical problem of surface gravity wave interaction with a moored finite floating elastic plate in the presence of a finite submerged flexible membrane in three-dimensions. The numerical accuracy of the method is demonstrated by computing the complex values of reflected wave amplitudes for different modes of oscillation and mooring stiffness. Further, the effect of compressive force and modes of oscillations on a free oscillation hydroelastic waves in a closed channel of finite width and length for floating and submerged elastic plate system is analysed. 相似文献
9.
Abstract A number of engineering organizations and individuals have contributed toward a comprehensive feasibility study made in 1973–1974 in connection with a submerged floating tunnel project in Norway. The tunnel is planned to cross the 500 m deep Eidfjord in Hardanger over a length of about 1.3 km. The main findings from geophysical explorations, subsoil sampling operations, and an extensive laboratory testing program on extracted soil samples are described here. A main part of this paper is devoted to the study of a full‐scale field test with a gravity anchor block weighing 180 tonne. This study reports on the behavior of the block during launching from its sloping construction ground, the sinking operation, and the behavior of the block after it reached the bottom at 450 m depth. Observations of settlement and tilt are available, and a comparison is made between the observed and computed behavior. Broadly speaking, a fairly good agreement was found. 相似文献
10.
建立双臂起重船从运输船上起吊大型稳桩施工平台的吊装系统模型,其中,起重船与运输船呈T型布置。首先基于势流理论,采用专业水动力分析软件AQWA开展了双船系统的频域水动力分析,分析双船起吊系统的水动力干扰特性和遮蔽效应,并对双船间隙自由液面进行黏性修正从而提高频域多体水动力分析的精度。进一步采用频域—时域方法对起吊耦合系统进行参数分析,探究起吊速度、波浪周期等对吊索张力和起重船运动的影响规律。分析多个工况下运输船的遮蔽效应对起吊系统的影响。结果表明,对间隙流体施加阻尼自由液面边界条件可以一定程度提高计算模型的精度,在某些周期的迎浪条件下运输船对起重船的遮蔽效应可以降低吊装系统的响应;起吊速度对时域动力响应的影响较小;周期为8 s的规则波引起过大的动力响应。 相似文献
11.
For a large floating structure in waves, the damping is computed by the linear diffraction/radiation theory. For most degrees of freedom, this radiation damping is adequate for an accurate prediction of the rigid body motions of the structure at the wave frequencies. This is not particularly true for the roll motion of a long floating structure. For ships, barges and similar long offshore structures, the roll damping is highly nonlinear. In these cases the radiation damping is generally quite small compared to the total damping in the system. Moreover, the dynamic amplification in roll may be large for such structures since the roll natural period generally falls within the frequency range of a typical wave energy spectrum experienced by them. Therefore, it is of utmost importance that a good estimate of the roll damping is made for such structures. The actual prediction of roll damping is a difficult analytical task. The nonlinear components of roll damping are determined from model and full scale experiments. This paper examines the roll damping components and their empirical contributions. These empirical expressions should help the designer of such floating structures. The numerical values of roll damping components of typical ships and barges in waves and current (or forward speed) are presented. 相似文献
12.
The coupled system of two side-by-side fixed and/or floating bodies interacting with a large amplitude nonlinear wave is studied using a direct time domain solution method. The numerical model is based on a three-dimensional mixed Eulerian–Lagrangian (MEL) method under certain simplifying approximations permitting Rankine panel scheme to be implemented over a time-invariant boundary surface to solve the boundary value problem for the unknown velocity potentials. A 4th order Adams–Bashforth–Moulton scheme is used for time marching of rigid-body motion histories of the individual bodies and evolution of the free-surface including the gap region in which large resonant fluid motions occur. A systematic study has been carried out to evaluate the performance of the developed time domain method in simulating the forces and motions as well as the fluid motion in the gap region for the two body system under various arrangements and in different wave-headings. At first, the computed numerical results have been validated and verified with computational and experimental results available in literature for standard geometries such as vertical truncated cylinders and rectangular boxes. Secondly, effectiveness of the damping lid model which is introduced to suppress wave resonance in the gap region is investigated including its influence on maximum sway forces on fixed and floating rectangular barges in side-by-side configurations. Thirdly, comparative studies on absolute and relative motion response for two cases (two rectangular barges, and a FLNG-FPSO + shuttle tanker) in side-by-side arrangement are detailed to bring out the importance of nonlinearities arising due to steep nonlinear incident waves. Finally, coupled motions of the two-body system of an FPSO and a shuttle tanker floating in side-by-side configuration in a steep nonlinear wave field are studied in which the two bodies are connected through hawsers, and also the FPSO is moored to the ground. Additionally there is a fender between the two bodies. 相似文献
13.
文中研究采用柔性气囊助浮法起升导管架的拆除技术。浅水海域浮吊进入困难并且拆除导管架的施工费用昂贵。考虑气囊产生的浮力巨大、价格便宜及连接结构方便的特点,针对即将拆除的QK18-2平台,设计气囊助浮起升导管架的技术方案。考虑水深确定导管架吃水,设计气囊与导管架的连接方式。针对导管架在位起浮状态,计算带有气囊的导管架系统幅频响应RAOs,考虑不同的海洋环境参数,计算分析风浪流作用下导管架系统6个自由度的时域运动响应,文中提出了多点系泊控制导管架运动的合理系泊方式。研究结果表明,气囊助浮法拆除导管架技术具有较高的工程实用价值,针对目标导管架平台设计的气囊助浮拆除技术方案,具有费用低、风险小及不需使用浮吊的技术优势,该项技术可以在导管架平台拆除中推广应用。 相似文献