共查询到19条相似文献，搜索用时 187 毫秒
1.
浮托安装法广泛应用于大型组块海上安装。导管架平台上部组块浮托安装进船过程中,风、浪、流引起的浮托驳船横向运动造成浮托驳船与导管架桩腿的碰撞,碰撞力可能会对导管架结构造成损伤。陆丰7-2上部组块浮托安装中,为了监测碰撞力大小,设计了碰撞力海上监测系统。通过在导管架外侧四个桩腿上安装光纤光栅应变传感器对碰撞过程中导管架桩腿进行应力监测,进而计算碰撞力。对碰撞过程,载荷作用位置、方向进行简化,并对载荷大小及垂向作用位置对计算的影响进行了研究。结构分析模型简化后,测点von-Mises应力与碰撞力大小成正比,对导管架整体结构建模计算并取局部结构计算比例系数,结合应力实测数据计算出进船过程中驳船对导管架桩腿碰撞力。 相似文献
2.
以包括泥面以下桩基在内的所有杆件所构成的桁架式导管架平台为对象,首先通过数值模拟计算组成导管架平台的每一构件的波浪载荷,然后以有限元算法建立包含了平台桩基土反力等因素的导管架整体结构的力学模型,将计算所得波浪载荷施加到该有限元力学模型上,以此通过数值计算手段分析平台中包括泥面以下主桩在内所有杆件的最大应力分布以及桩基的位移特征,从而对平台在特定的波浪环境下的平台主桩的安全性问题进行观察。所提出的方法可为导管架平台在波浪环境下主桩的强度特征分析提供一种实用手段。 相似文献
3.
目前我国的海洋工程结构中,导管架式海洋平台占有很大比重,动荷载作用下导管架式海洋平台的振动问题日益突出。随着石油开发向深海进军,平台结构柔性更大,振动问题更为显著,可能对结构、设备及人员造成一定的安全隐患。基于现场监测获得的导管架平台振动响应,结合相关规范给出振动对人体的影响,提出人员感受评价流程。最后,以渤海、南海海域的导管架平台为例,基于现场监测,分析了结构的振动特性及作业人员在相应振动环境下的感受。此方法对导管架平台上部作业人员的工作与安全保障提供了科学依据。 相似文献
4.
单点系泊海洋导管架平台结构体系可靠性分析 总被引：3，自引：1，他引：3
采用非线性逐步倒塌分析方法，考虑桩-土-结构的非线性相互作用，研究了单点系泊海洋导管架平台在极端荷载作用下的承载能力计算模型，在此基础上结合蒙特卡洛随机抽样法，提出了单点系泊海洋导管架平台结构体系可靠度计算方法。最后对工程实例BZ28-1SPM单点系?白海洋导管架平台结构在20年设计基准期和50年重现期进行了体系可靠性分析：研究结果表明：用50年重现期的环境荷载参数来进行BZ28-1SPM单点系泊海洋导管架平台结构的设计是合理的；在环境荷载中起主导作用的是由波浪引起的系泊力；在海洋平台结构的设计及对已服役平台结构的评估中运用体系可靠度理论，可以为海洋平台结构的设计、维护和评估提供理论依据。 相似文献
5.
浮筒辅助大型导管架结构整体拆除作业是一个连续过程，作业过程中拆除系统的动力荷载及动力参数均会发生显著变化，传统基于某一稳定状态的结构动力响应分析方法不能准确预测拆除系统上浮过程中的动力响应。通过建立浮筒辅助大型导管架结构整体拆除上浮过程动态分析模型，对拆除系统上浮过程的动力响应特性进行研究。结果表明，整体拆除动态分析模型可以准确描述拆除系统上浮过程中浮筒及导管架浮力变化对上浮高度的影响机制，拆除系统上浮高度约为不考虑浮筒和导管架浮力变化时的90%。此外，浮筒辅助大型导管架整体拆除方法的动态稳定性较强，四级海况下拆除系统的最大偏移量仅为4.2 m，有较好的工程应用前景。 相似文献
6.
7.
8.
桩腿耦合装置(简称LMU)在平台浮托安装过程中上部组块插尖与导管架桩管对接期间起缓冲作用,是海上浮装的最重要装置之一。运用非线性有限元软件ABAQUS,对相同尺寸、受相同垂向载荷作用的有沙箱和无沙箱的LMU分别进行了显式准静态和动态数值模拟,并将计算结果进行对比,以考察沙箱对LMU力学特性的影响。结果表明,与无沙箱的LMU相比,有沙箱的LMU能够承受较大的外载荷作用,可提升外套筒钢材的使用效率,较迅速地降低载荷转移作业过程中整个平台的运动速度,提高平台浮托安装过程中能量吸收速率,并且能减小LMU在动态过程中的最大应力。 相似文献
9.
针对强台风引起的平台倒塌问题,综合隐式有限元与显式动力有限元算法,建立导管架平台结构倒塌全过程仿真流程;提出基于重现期的Pushover分析方法,充分考虑平台侧向环境载荷分布的变化以及可能的甲板上浪载荷因素,使得确定的倒塌环境载荷更加真实;采用APDL编制平台隐式与显式有限元模型转化程序,有效解决波浪载荷计算与精确施加的难题;在此基础上,应用LS-DYNA实现导管架平台在强台风载荷下的倒塌全过程仿真,动态再现平台结构倒塌过程中的构件破坏失效及内力分布,深入揭示平台结构的倒塌机理。研究成果可为导管架平台结构抗台风设计及理论研究提供参考。 相似文献
10.
考虑随机波浪载荷的导管架平台结构优化设计 总被引：1，自引：0，他引：1
研究海洋平台适应恶劣海况的设计理论，应用ANSYS软件对位于渤海湾的CII导管架海洋平台进行动力分析，得到CII平台基本动力学参数和在随机波浪载荷作用下的动力响应。CII平台是以管件为主的空间框架结构，将管件外径作为固定约束，以其壁厚作为设计变量，考虑刚度、强度和稳定性等约束条件，以结构的总重量为优化目标，对平台进行构件尺寸的优化设计，计算结果表明目标函数值比原设计减小4．33％，经济效益明显。此研究方法对近海导管架海洋平台的结构设计具有实际参考价值。 相似文献
11.
1 .IntroductionThe structural design method has evolvedfromthe workingstress method,damage stage methodtolimit state method.The more recent probabilisticlimit state design method,whichis based onreliabili-tytheory,has beengenerallyacceptedinthe designcode… 相似文献
12.
Corrosion of offshore platforms is inevitable. In an ocean corrosion environment, the strength of a platform is weakened greatly. When simultaneously subjected to earthquakes or other extreme loads, the ultimate bearing capacity of the corroded platform is dramatically reduced, resulting in compounded damage from both corrosion and earthquake. Thus, the influence of corrosion cannot be neglected in the seismic performance investigation of platforms. The commonly used corrosion model in platform design is uniform corrosion, and the corrosion rate rule for any parts or zones in a platform is the same. In real cases, however, there are significant differences between the corrosion characteristics in different parts of a platform. Based on theoretical aspects and measured data, a zonal time-variant corrosion model of a platform is developed for a seismic collapse performance investigation. The pushover and incremental dynamic analysis (IDA) methods are adopted here to calculate the collapse margin ratio (CMR), there serve strength ratio (RSR) and ductility coefficient (μ) that are frequently used for the safety reserve evaluation of a platform. The failure reason and collapse probability of platforms considering different service periods are compared. The most prominent feature of the proposed time-variant zonal corrosion model is to capture potential switch of weak location and resulting failure path of corroded jacket offshore platforms although the proposed model needs further calibration by more reliable in-field measured data. As expected, corrosion can definitely cause a reduction in earthquake resistance of a jacket offshore platform, as well as ultimate deformability. The coupled effect between the time-variant vibration properties of the platform and the spectral characteristics of selected motions, the collapse-level spectral acceleration (SA) does not always decrease with increasing corrosion degree. The curves corresponding to normalized CMR and RSR agree very well with each other in the early corrosion development stage and service period beyond 30 years. Some distinct differences can be found during the two stages, with the greatest difference up to 10% for the example platform. 相似文献
13.
Parametric study on offshore jacket launching 总被引：1，自引：0，他引：1
Platform structures are commonly utilized for various purposes including offshore drilling, processing and support of offshore operations. Jacket type structures are attractive in relatively shallow water regions. A jacket is a supporting structure for deck facilities stabilized by leg piles through the seabed. The size of a jacket is dependent on deck size, pile dimensions and environmental loads. In a jacket design, operational and environmental loads are very important and must be investigated intensively to secure the stability of structures during their operation life, and installation phase as well. To confirm the stability, several analyses including in-place, fatigue, dynamic, load-out, transportation, lifting, and launching are performed. As the jacket weight and dimensions become large, a launching technique is applied to install the jacket. The launching analysis needs to consider quite a number of parameters including environmental conditions, launch barge specification, ballast, trim angle, local member integrity, etc. Due to the complexity of the operation, there is not a straightforward guideline or procedure for analysis. In this paper, a general procedure for analysis with various conditions and launching criteria are discussed and investigated. The effects of parameters are closely examined by numerical modeling. 相似文献
14.
Jacket cutting operation is one of the most complicated and highest risk operations in the process of decommissioning offshore piled platform, the security and stability of which must be assured. In this paper, the current research on offshore structure removal and jacket cutting is introduced, on the basis of which the types of load along with the load calculation method are determined. The main influences on the stability of a jacket in cutting are analyzed. The experiment test plan is drawn by using orthogonal testing method, and the formula of critical load during the cutting procedure is deduced by differential evolution algorithm. To verify the method and results of this paper, an offshore piled platform to be decommissioned in the South China Sea is taken for an example, and the detailed schedule for jacket cutting is made with the three-dimensional finite element model of the jacket established. The natural frequency, stress, strain and stability of the jacket during cutting process are calculated, which indicates that the results of finite element analysis agree well with that of the deduced formula. The result provides the scientific reference for guaranteeing the safety of jacket in cutting operation. 相似文献
15.
通过对平台在风浪作用下的振动测试分析,发现了直立式非灌浆桩腿导管架平台在海底冲刷条件下发生异常振动的原因是导管架与桩之间存在较大的相对运动,以至于在风浪较大时发生碰撞。因而,结构的动力特性和动态响应都与设计结果不一致。在非极值海况条件下,平台的振动超出了设计预测值,并提出了治理和设计建议。 相似文献
16.
研究重力式海洋平台沉箱的表面裂纹最大深度,通过考虑沉箱有一个内表面裂纹,将问题简化为无裂纹重力式平台问题和带裂纹矩形板问题的叠加,应用有限元方法对重力式海洋平台无裂纹情形进行了静力分析,得到了与裂纹位置对应处的环向拉应力。计算裂纹矩形板的应力强度因子,得到海洋环境荷载下沉箱内表面裂纹的最大深度为0.066 8m,计算结果可供海洋平台的设计参考。 相似文献
17.
Behavior of Pile Groups under Lateral Load 总被引：2，自引：0，他引：2
Yang Keji Li Qixin Wang Fuyuan
Associate Proferssor Hehai University Nanjing Engineer Hehai University Nanjing 《中国海洋工程》1991,(2)
Based on investigation and model tests, and in combination with the research work on group effect for pile groups under lateral loads relating to the code of fixed offshore platforms, a series of studies have been performed on the behavior and failure mechanism of laterally loaded pile groups, critical pile spacing inducing group effect, lateral bearing capacity of pile groups and its main influence factors, the stress-strain relationship for single piles and pile groups and so on. Some new laws about non-uniformity of load distribution in the longitudinal direction of pile groups and load-deflection (p - y) curves for pile groups have been discovered, and an empirical formula is presented in order to remedy the defect of current calculating methods at home and abroad. These results can be used for reference in the design of pile foundation under lateral loads. 相似文献
18.
以实际环境荷载作用下的实际海洋导管架平台结构为对象，研究了海洋平台结构在风，流，海冰等多荷载模式和多荷载工况下的优化设计的理论方法和应用技术，建立了结构尺寸优化，形状优化和拓扑优化问题的统一模型。计算结果反映出形状优化比尺寸优化所得设计更优，而拓扑优化的设计效果最好。不同的荷载工况对应的最优拓扑形式不同，因此在实际设计中应考虑实际的荷载工况，选取不同的拓扑形式。 相似文献
19.
Reliability-Based Design for Jacket Platform Under Extreme Loads 总被引：7，自引：0，他引：7
In this paper, reliability analysis for the offshore jacket platform with the interaction of structure- pile- soil under extreme environmental loads is carried out. The inherent uncertainties of the environmental load, foundation soil, platform itself, and calculating models are evaluated. The action of extreme loads on the offshore platform is modeled as a function of extreme wave height. The system capacity of the whole platform is determined by nonlinear pushover analysis, and the relevant probability property is obtained by the simulation method. The reliability model for the whole jacket platform is described as the relationship between the load and resistance based on the offshore design codes. The reliability of whole platform is calculated by the analytical method and the importance sampling method on the basis of a case study for a tripod jacket platform. 相似文献