共查询到20条相似文献，搜索用时 31 毫秒
1.
A method for analysis of the structural damage due to ship collisions is developed. The method is based on the idealized structural unit method (ISUM). Longitudinal/transverse webs which connect the outer and the inner hulls are modelled by rectangular plate units. The responses are determined by taking into account yielding, crushing, and rupture. Some plates of the outer and the inner shell subjected to large membrane tensions are modelled by membrane tension triangular/rectangular plate units, while the remaining shell panels are modelled by the usual plate units. The effect of stiffeners on the stiffness and the strength is considered as well. In order to include the coupling effects between local and global failure of the structure, the usual non-linear finite-element technique is applied. In order to deal with the gap and contact conditions between the striking and the struck ships, gap/contact elements are employed. Dynamic effects are considered by inclusion of the influence of strain-rate sensitivity in the material model. On the basis of the theory a computer program has been written. The procedure is verified by a comparison of experimental results obtained from test models of double-skin plated structures in collision/grounding situations with the present solutions. As an illustrative example the procedure has been used for analyses of a side collision of a double-hull tanker. Several factors affecting ship collision response, namely the collision speed and the scantlings/ arrangements of strength members, are discussed. 相似文献
2.
《Ocean Engineering》2007,34(5-6):645-652
Although International Maritime Organization (IMO) has taken many measures to minimize ship collisions, ships carrying liquid cargo sometimes do get struck by other vessels. The outflow of crude oil causes very serious consequences to the environment. In such cases it is necessary to analyze the response of structure of struck liquid cargo-filled tank to account for fluid–structure interaction accurately. In this paper, numerical simulation of collision between a container ship with double hull very large crude carrier (VLCC) is presented. Three different numerical simulation mothods were adopted to model fluid–structure interaction in liquid-filled cargo tank, namely arbitrary Lagrangian–Eulerian finite element method, Lagrangian finite element method and linear sloshing model. The numerical simulation results reveal that the fluid–structure interaction of liquid cargo-filled tank has a significant effect on the motion and structural response of the struck cargo tank. Compared with the calculation results of ALE FE method, the linear sloshing model underestimates the influence of fluid–structure interaction of liquid cargo tank while the Lagrangian–Eulerian finite element method may be considered as the practical method for engineering applications as it provided more reasonable results with a relatively low central processing unit (CPU) time. 相似文献
3.
Collision and grounding are the most common accidents in ship operation. Some accidents are due to human failure, but several research projects have shown that a high percentage of these accidents could have been avoided if the ship have had better manoeuvrability characteristics. This paper describes how, when the shipyard select some important ship parameters and dimensions at the design stage, these set of parameters influence manoeuvrability characteristics. To obtain these effects, some IMO manoeuvres have been numerically simulated for a sample ship and a non-linear numerical model proposed by the authors to study ship manoeuvrability is described in this work. The day to day practice of a shipyard where fast modelisation and calculations are required, and modifications to the original design are quite common at the preliminary design stage, requires fast but accurate numerical models. 相似文献
4.
It is very common that a submarine pipeline has to pass through a ship mooring area near a harbor zone in the Bohai Bay, China. The risk assessment of accidental events induced by the potential anchoring ships is carried out, which will lead to external interference with the pipeline. A procedure to calculate the probability for the anchoring activity in the ship mooring area to damage the underlying pipeline is proposed. The adopted methodology is based on the recommendations suggested by the DNV Codes. The same philosophy is also applied to estimate the damage probability that is concerned with sinking ships. 相似文献
5.
The topic of ship recycling has obtained considerable attention during the last two decades for a variety of reasons with the likelihood of the adoption of a new international convention under the auspices of the International Maritime Organization (IMO). This study applies econometric modeling to a unique data set to provide insight into the dynamics of the ship recycling market. The data set contains information on 51,112 ships over 100 gt and includes 748,621 events over a period of 29 years. The analysis confirms a negative relationship of earnings and a positive relationship of scrap prices for all locations while Bangladesh seems to be more sensitive to changes in earnings than the other locations and more likely demolishes larger and older vessels. The results for flag and ownership vary across scrapping locations with Malta and Cyprus indicating potential importance from a registry perspective. The overall safety profile of a vessel seems to be less important towards the probability of a ship being scrapped. Possible implementation of the convention at EU level will mostly likely affect Turkey while non-ratification of one of the major flags will most likely affect China or Bangladesh. 相似文献
6.
This paper is an attempt to contribute to the improvement of an analysis model within overall structural synthesis procedure for the multi-deck ships. The paper is organized in two parts: modeling principles and model validation. Principles of the proposed generic model formulation on the global and sub-structure levels are given in detail while the load model is briefly summarized. The basic building blocks (macro-elements and gross-elements) for the modeling of ordinary stiffened panels, combining numerical and analytical approaches, are presented and discussed w.r.t. requirements for a multi-deck structure. Different surrogates (sets of elements and ordinary macro-elements) used for equivalent modeling of large side openings are evaluated, since the reduced shear stiffness of superstructure sides has large influence on the hull girder stress distributions along the entire cross section height. The generic ship models developed using outlined principles and the basic building blocks are further validated through complex examples of a large cruise ship and a livestock carrier. On the global level, the accuracy of the generic model w.r.t. the longitudinal stress distribution over ships height is compared with a standard full ship FE model. The results confirmed that the suggested structural modeling principles, based on the generic FE model can be applied for the fast investigation of different structural topological/geometrical concepts as well as for the ordinary scantling/material optimization. 相似文献
7.
China Ocean Engineering - The collision of ships poses a great threat to the piers in navigable waters. The kinetic energy of the moving ship can be consumed not only with the structural... 相似文献
8.
为解决无人船适用海商法存在的问题,促进我国无人船海上运输产业的健康可持续发展,文章从法理的角度阐释国际海事委员会无人船调查问卷中无人船的法律地位、船长和船员的认定以及无人船的碰撞责任,提出无人船适用海商法存在不确定性风险;在海商法领域,无人船的法律地位认定、船长和船员的识别以及船舶碰撞责任的适用仍存在问题,解决上述问题的有效路径是明确无人船的法律地位、将岸基控制人员识别为船员、采用过错责任原则认定无人船的碰撞责任以及合理分配船东与生产者之间的碰撞责任,以合理规避无人船的风险。 相似文献
9.
以浮式两级缓冲防撞系统为研究对象,介绍其工作原理,利用动力学分析软件LS-DYNA构建了碰撞模型并进行了仿真计算,依据仿真结果完成了以阻尼索组与浮体结构构型为主要内容的防撞系统设计。研究确定了阻尼索组的布置位置、材料及数量,为浮体内部结构构型设计了7种比选方案,分别对5 000 t船舶撞击浮体前梁和侧梁的动态过程进行了仿真分析,对比了不同方案及不同板梁厚度下的接触力。研究结果表明:浮体内部构造若选用板梁厚度12 mm的方案6设计,则碰撞发生时浮体前梁和侧梁分别可以稳定地提供10.4 MN和7.9 MN的均值力,以及11.5 MN和8.9 MN的峰值力,设计浮体能够满足整体刚度要求,防撞系统符合双保护原则。防撞系统及浮体结构构型设计为下一步全面开展船舶撞击防撞系统后的动力学响应分析奠定了基础。 相似文献
10.
11.
Compliance with international emission regulations: Reducing the air pollution from merchant vessels
In September 1997, the International Maritime Organization (IMO) adopted an international convention protocol to reduce air pollution from ships, in order to achieve sustainable maritime development. This protocol has been approved by 15 member countries and will be enforced in May 2005. Pollutants emitted from ships, such as nitrogen oxides, volatile organic compounds, sulfur oxides, etc. will be regulated by this convention through ship inspections and issuance of certificates. Ships belonging to maritime countries such as Taiwan, which sail around the world and berth in commercial ports, must obey this convention. This study has investigated possible strategies, which may be adopted by maritime countries to conform to this IMO convention in order to reduce the air pollution from ships. A sea-going ship must prepare EIAPP and IAPP certificates for inspection by port-state-control officials, when the ship is anchored at a maritime port. These port-state-control officials may also require the continuous detection and sampling of a ship's emissions, while it is berthed at the port. Legislative support is necessary for successful implementation of these safeguards. It is suggested, therefore, that the administration of both navigational and environmental protection, in maritime countries, cooperate in the revision of relevant federal laws, to implement the provisions of the MARPOL 73/78/97 convention; in this way, the air pollution from ships can be effectively controlled. Installation of advanced detection equipment can effectively detect any ships’ violations of air pollution regulations. The Harbor Affairs’ Bureau should also establish a database of air pollution inspections for ships berthed within their harbor, requiring that ships’ equipment comply with the requirements of the MARPOL convention, for the reduction of air pollution. 相似文献
12.
Kelvin wake is one of the common wakes generated by moving ships and contains rich information about ships. In this paper, free wave elevations of Kelvin wake are calculated based on the Michell thin ship theory combined with a point source perturbation model. The probability density function of sea surface slopes is introduced to calculate the specular reflection of sunlight and skylight and the refraction of scattered light underwater. Satellite-detected Kelvin wakes are then simulated by adding surface specular reflectance and water-leaving reflectance. Simulation results agree well with satellite measurements. The specular reflection of sunlight is the decisive factor affecting the features of Kelvin wakes according to the simulation results. The main factors that influence the specular reflection of sunlight, such as the incident direction and observation direction, ship parameters, and background environment, are discussed. This study is helpful for wake detection and provides a preliminary theoretical method for the retrieval of ship information. 相似文献
13.
Seakeeping of two ships in close proximity 总被引：1，自引：0，他引：1
Underway replenishment is an essential component of long-term naval operations. During underway replenishment, two ships travel in close proximity at moderate forward speed. This paper examines the hydrodynamic interactions that can influence seakeeping during such operations. Presented numerical predictions include the influence of interaction effects on hydrodynamic forces for two ships in waves. A scarcity of validation material for numerical predictions prompted new towing tank experiments for two ships in waves. The experiments used semi-captive models, and the numerical code was modified to include restraining forces for specified modes. The numerical predictions and experiments show that the presence of a larger ship can significantly influence the motions of a smaller ship in close proximity. 相似文献
14.
As the number of ships for marine transportation increases with the globalisation of the world economy, waterways are becoming more congested than before. This situation will raise the risk of collision of the ships; hence, an automatic collision avoidance system needs to be developed. In this paper, a novel approach based on deep reinforcement learning (DRL) is proposed for automatic collision avoidance of multiple ships particularly in restricted waters. A training method and algorithms for collision avoidance of ships, incorporating ship manoeuvrability, human experience and navigation rules, are presented in detail. The proposed approach is investigated not only by numerical simulations but also by model experiments using three self-propelled ships. Through the systematic numerical and experimental validation, it is demonstrated the developed approach based on the DRL has great possibility for realising automatic collision avoidance of ships in highly complicated navigational situations. 相似文献
15.
Fatigue damage in a ship hull could lead to leakage of ballast or cargo, water intrusion, degradation of hull strength, or even worse, i.e. catastrophic structural failure. For ships navigating in ice-covered waters, fatigue damage due to ice actions can be of importance. The present paper proposes a systematic procedure for fatigue damage assessment in relation to ships navigating in ice-covered waters. Closed form expressions for the fatigue damage based on the Palmgren–Miner’s rule are derived for several different statistical models of the stress amplitudes, i.e. the exponential, the Weibull’s, and the three-parameter exponential distributions. Additional expressions are also provided when stress concentration factor and/or a lower threshold of the stress amplitude are taken into account. The proposed procedure for fatigue damage assessment reflects the variation in ice conditions, vessel’s speed, and operational modes. Some practical concerns related to application of the proposed procedure are also discussed. A particular example of fatigue damage calculation is presented, where data obtained from full scale measurement performed on board of the vessel KV Svalbard in the winter 2007 are utilized. 相似文献
16.
针对船舶与中空夹层钢管混凝土（CFDST）导管架平台碰撞问题，利用ABAQUS/Explicit非线性有限元软件建立中空夹层钢管混凝土导管腿导管架数值模型，对船舶碰撞进行数值模拟，对比分析1 m/s、2 m/s和3 m/s的3种碰撞速度下工况下导管架抗碰撞性能、耗能及损伤。从碰撞力、碰撞区域变形以及导管架能量耗散等方面详细研究中空夹层钢管混凝土导管腿作用下导管架整体的损伤模式和动力响应。结果表明：CFDST导管架在船舶碰撞荷载作用下主要由CFDST导管腿耗能，有效控制了结构整体位移变形，提升了整体刚度，有效发挥平台各构件之间组合耗能，结构抗碰撞能力得到明显提升。 相似文献
17.
随着船舶大型化和港口建设深水化发展，外海不同周期波浪作用下大型系泊船泊稳问题与小型系泊船相比出现了新的特点。为此，利用数值模型方法研究了在不同入射角度和周期的涌浪作用下港内大型系泊船的水动力响应，针对系泊船的泊稳情况探讨了船舶的运动规律和运动特性。研究发现，在涌浪周期较大的情况下，限定波高的泊稳标准不足以用来确定系泊船的正常作业条件，港内泊船的水平运动（纵荡、横荡和艏摇）极易超出运动标准值并影响装卸作业效率，并且船舶的水平运动表现出主要由次重力波主导的低频运动特性，而垂直运动（垂荡、横摇和纵摇）表现出主要由短波主导的波频运动特性。 相似文献
18.
基于AIS的船舶会遇局面紧迫度量化分析 总被引：1，自引：0，他引：1
近年来船舶大型化、高速化的发展以及数量的不断递增,导致船舶碰撞概率大大增加。为更好地保障船舶航行安全,提出船舶会遇局面紧迫度这一概念。该概念表征船舶在当前航行状态下由于一定范围内所有其他船舶的存在而处于的会遇局面的紧迫程度,其旨在帮助船舶驾驶员实时感知并掌握船舶在海上航行时所处会遇局面的状况,从而据此加以判断并及时采取措施规避碰撞风险。建立了船舶会遇局面紧迫度的计算模型,该模型以考虑到本船速度的动态圆形领域为空间约束条件,综合考虑其他船舶相对于本船的方位分布和距离这两个指标的影响,基于信息量量化紧迫度。利用2016年1月1日天津港AIS数据进行紧迫度的计算与分析,计算结果与实际相符,该计算模型能够准确反映船舶在航行过程中所处会遇局面的紧迫程度。利用双线性内插法建立天津港区域紧迫度二维彩色平面分布图,其表达效果优于传统热度图。 相似文献
19.
针对远海浮式结构物与供应船进行旁靠作业时,水动力干扰、两船的相对运动、旁靠系缆系统和护舷系统的受力特征等问题开展研究。建立各船的有限元模型,设计出两船旁靠连接缆系统,选取合适的系泊缆和护舷参数。研究表明:浮式结构物和供应船的横荡、纵荡方向存在一定的同步性或跟随性,幅值相差不大,其它方向的运动并不存在明显的同步特征;供应船的各自由度运动幅值均比浮式结构物偏大;旁靠护舷的受力时历出现了明显的低频效应,说明护舷的受力较大程度上受船体低频慢漂运动的影响;浮式结构物对供应船的水动力干扰较大,当浮式结构物在供应船的上风位置时,表现为屏蔽效应,供应船的运动较小;在其背风位置时,运动加剧,出现多次共振、峰值放大现象,供应船对浮式结构物的水动力性能几乎无影响,因此,供应船从浮式结构物的下风口一侧靠泊作业将更有利于船舶的安全性能。这些研究结论可为实际工程操作提供参考。 相似文献
20.
This paper presents the research on the external mechanism of collision characters for a SPAR platform. The collision characters of SPAR platform have not attracted so much attention as that of ships in the past, because short of this kind of collision accidents reported. But with the increasing number of SPAR platforms in the world, the possibility of such kind of accident also increases. Therefore, it is necessary to master the character of SPAR collision. Model test technique is employed to study the external mechanism. The collision scenario is a ship colliding with a SPAR platform moored in the site with 1500 meters water depth. The striking ship hits the SPAR platform on the hard tank near water surface in its longitudinal direction. The specifics of the SPAR＇s motions and the tension forces of the mooring lines are collected to summarize the hydrodynamic characters in the collision scenario. It is found that the maximal displacements and the maximal pitch angles of the SPAR platform, and the maximal tension forces of mooring lines are all linearly proportional to the initial velocity of the striking ship basically. Mooring lines play elastic roles in the collision course. 相似文献