共查询到20条相似文献，搜索用时 531 毫秒
1.
The fundamental frequency of vibration of plates elastically restrained against rotation along the edges and with centrally located circular or square holes is determined by means of the optimized Rayleigh's method. Independent solutions are also obtained using the finite element method.A comparison with experimental values is also presented in the case where the plate is rigidly clamped along the four edges. 相似文献
2.
A survey of the literature reveals that the title problem has not been previously solved. The fundamentals frequency of transverse vibration of the orthotropic structural element is determined by expanding the displacement amplitude function in terms of simple polynomial coordinate functions which satisfy identically the essential boundary conditions and approximately some of the natural edge requirements.The Ritz method is then used to generate the frequency equations. 相似文献
3.
This investigation arose from the practical necessity of placing a centrifugal pump rigidly attached to a thin, circular cover plate of a water tank in a medium size ocean vessel. Due to lack of space, it was necessary to locate the system off—center of the circular configuration. It was considered necessary to calculate the fundamental frequency of the coupled system.The first part of the present study is concerned with the determination of the fundamental frequency of vibration of a circular plate carrying a concentrated mass at an arbitrary position, using a variational approach.Numerical results are obtained for the stated problem for several combinations of the intervening geometric and mechanical parameters.An experimental investigation is also performed in the case of clamped plates.Based on the results for solid circular plates, the fundamental frequency of annular plates with a free inner edge and a concentrated mass is also obtained.Circular plates are fundamental structural elements in ocean engineering applications: from off-shore platforms to underwater acoustic transducers. In a great variety of circumstances, they must carry operational systems in an eccentric fashion. Since the dynamic performance is always of interest, one must know at least some of the basic dynamic parameters. 相似文献
4.
Free vibrations of three-dimensional extensible marine cables with specified top tension via a variational method 总被引：1，自引：0，他引：1
This paper presents a model formulation that can be used for analyzing the three-dimensional vibration behaviours of an inclined extensible marine cable. The virtual work-energy functional, which involves strain energy due to axial stretching of the cable and virtual work done by external hydrostatic forces is formulated. The coupled equations of motion in the Cartesian coordinates of global systems are obtained by taking into account the difference between Euler’s equations and equilibrium equations. The method of Galerkin finite element is used to obtain the mass and stiffness matrices which are transformed into the local coordinate systems. Then the eigenvalue problem is solved to determine its natural frequencies and corresponding mode shapes. The model formulation developed herein is conveniently applied for the cases of specified top tension. The numerical investigations are carried out to demonstrate the validity of the model and to explore in details the influence of various parameters on the behaviours of marine cables. Results for the frequency avoidance phenomenon, maximum dynamic tension and coupled transverse mode shapes are presented and discussed. 相似文献
5.
Unlike most previous studies on the transverse vortex-induced vibration(VIV) of a cylinder mainly under the wallfree condition (Williamson & Govardhan,2004),this paper experimentally investigates the vortex-induced vibration of a cylinder with two degrees of freedom near a rigid wall exposed to steady flow.The amplitude and frequency responses of the cylinder are discussed.The lee wake flow patterns of the cylinder undergoing VIV were visualized by employing the hydrogen bubble technique.The effects of the gap-to-diameter ratio (e0/D) and the mass ratio on the vibration amplitude and frequency are analyzed.Comparisons of VIV response of the cylinder are made between one degree (only transverse) and two degrees of freedom (streamwise and transverse) and those between the present study and previous ones.The experimental observation indicates that there are two types of streamwise vibration,i.e.the first streamwise vibration (FSV) with small amplitude and the second streamwise vibration (SSV) which coexists with transverse vibration.The vortex shedding pattem for the FSV is approximately symmetric and that for the SSV is alternate.The first streamwise vibration tends to disappear with the decrease of e0/D.For the case of large gap-to-diameter ratios (e.g.e0/D = 0.54～1.58),the maximum amplitudes of the second streamwise vibration and transverse one increase with the increasing gapto-diameter ratio.But for the case of small gap-to-diameter ratios (e.g.e0/D = 0.16,0.23),the vibration amplitude of the cylinder increases slowly at the initial stage (i.e.at small reduced velocity V,),and across the maximum amplitude it decreases quickly at the last stage (i.e.at large Vr).Within the range ofthe examined small mass ratio (m＜4),both streamwise and transverse vibration amplitude of the cylinder decrease with the increase of mass ratio for the fixed value of V,.The vibration range (in terms of Vr ) tends to widen with the decrease of the mass ratio.In the second streamwise vibration region,the vibration frequency of the cylinder with a small mass ratio (e.g.mx = 1.44) undergoes a jump at a certain Vr,.The maximum amplitudes of the transverse vibration for two-degree-of-freedom case is larger than that for one-degree-of-freedom case,but the transverse vibration frequency of the cylinder with two degrees of freedom is lower than that with one degree of freedom (transverse). 相似文献
6.
Transverse vibrations of a rectangular orthotropic plate with a free edge while the others are supported according to four different combinations of boundary conditions are considered in the present paper. The presence of a concentrated mass is also taken into account. In view of the difficulty of satisfying exactly the natural boundary conditions at the free edge, the fundamental frequency of vibration is determined by means of the optimized Rayleigh-Ritz method and a pseudo-Fourier expansion which contains, in its argument, the optimization parameters γi. The results are in excellent agreement with those obtained by means of a finite element algorithmic procedure. 相似文献
7.
8.
The behavior of vortex-induced vibration of a two-degree-of-freedom cylinder near a deformable wall in steady flow is investigated experimentally.The typical phenomenon of the two-degree-of-freedom cylinder’s VIV is discussed.The influences of initial gap between the cylinder and the wall on the dynamic responses of the cylinder are analyzed.The comparison is made about dynamic responses of the cylinder with one and two degrees of freedom.Experimental results show that the vibration of the cylinder near a deformable wall with a small value of initial gap-to-diameter ratios can generally be divided into two phases.The initial gap-to-diameter ratios have a noticeable influence on the occurrence of transverse vibration.The transverse maximum amplitude of the cylinder with two degrees of freedom is larger than that of the cylinder with one degree of freedom under the condition with the same values of other parameters.However,the vibration frequency of the cylinder for the two degrees of freedom case is smaller than that for the one degree of freedom case at the same value of Vr number. 相似文献
9.
基于量纲分析,设计模型试验研究稳态海流作用下子母管结构的横向涡激振动。通过对结构横向振动位移、水动力载荷和流场速度的同步测量分析,研究子母管结构横向涡激振动幅值和频率随约减速度的变化规律以及母管的水动力特性。实验结果表明,子母管间距比和质量比对管道横向振动和水动力有较大影响。在管间距比为0.1～0.5范围内,子母管结构涡激振动存在明显的不对称性。随着子母管间距比的减小,结构横向最大振幅增大,涡激振动的约减速度范围变宽;随着质量比的增大,涡激振动的约减速度范围变窄。母管的平均阻力系数随子母管间距比的增大单调递减,而平均升力系数则呈现非单调变化的特征。 相似文献
10.
A series of fully three-dimensional(3 D) numerical simulations of flow past a free-to-oscillate curved flexible riser in shear flow were conducted at Reynolds number of 185–1015. The numerical results obtained by the two-way fluid–structure interaction(FSI) simulations are in good agreement with the experimental results reported in the earlier study. It is further found that the frequency transition is out of phase not only in the inline(IL) and crossflow(CF) directions but also along the span direction. The mode competition leads to the non-zero nodes of the rootmean-square(RMS) amplitude and the relatively chaotic trajectories. The fluid–structure interaction is to some extent reflected by the transverse velocity of the ambient fluid, which reaches the maximum value when the riser reaches the equilibrium position. Moreover, the local maximum transverse velocities occur at the peak CF amplitudes, and the values are relatively large when the vibration is in the resonance regions. The 3 D vortex columns are shed nearly parallel to the axis of the curved flexible riser. As the local Reynolds number increases from 0 at the bottom of the riser to the maximum value at the top, the wake undergoes a transition from a two-dimensional structure to a 3 D one. More irregular small-scale vortices appeared at the wake region of the riser, undergoing large amplitude responses. 相似文献
11.
Numerical experiments are performed on the determination of the fundamental frequency of transverse vibration of simply supported rectangular plates having rectangular holes with free edges. This constitutes a rather common technological situation since holes are present in plates or slabs due to operational conditions, namely passage of conduits or ducts, electric conductors, etc., Satisfying exactly the governing natural boundary conditions at the hole edges is practically an impossible task. This study reviews numerical experiments where the displacement function is expanded into a double Fourier series which constitutes the exact solution when the plate is simply connected. Satisfactory convergence is achieved when the plate is doubly connected. 相似文献
12.
Local scour below a vibrating pipeline under steady current is investigated by a finite element numerical model. The flow, sediment transport and pipeline response are coupled in the numerical model. The numerical results of scour depths and pipeline vibration amplitudes are compared with measured data available in literature. Good agreement is obtained. It is found that pipeline vibrations cause increases of scour depth below the pipeline. The scour pit underneath a two-degree-of-freedom vibrating pipeline is deeper than that under a pipeline vibrating only in the transverse flow direction. The effects of water depth are also investigated. The present numerical result shows that water depth has weak effect on the scour depth. However it does affect the time scale of the scour. The shallower the water depth is, the less time it requires to reaches the equilibrium state of scour. It is found that the vibration forces vortices to be shed from the bottom side of the pipeline. Then vortex shedding around a vibrating pipeline is closer to the seabed than vortex shedding around a fixed pipeline. This contributes to the increase of the scour depth. 相似文献
13.
随着减振降噪及消声技术的发展,水声探测技术逐渐向低频段延伸。相应地,对适用于超低频频段且具有高灵敏度的水听器需求也越来越迫切。该研究基于有限元理论,对4种形式的声压水听器进行了灵敏度对比分析,构建了超低频、高灵敏度声压水听器的系统模型;通过仿真,得到了其前二阶模态,空气及水中的导纳曲线,以及声压接收灵敏度,仿真结果表明,超低频频段内,该研究设计的声压水听器在空气及水中的频响曲线平坦。基于仿真结果进行了样机制作,对所研制的实物样机进行了实验测试,测试结果表明该种声压水听器具有良好的超低频响应特性以及较高的灵敏度。通过对实物样机的测试,验证了其实用性。 相似文献
14.
In this paper, the flow-induced vibrations of marine propellers in cyclic inflows are investigated both experimentally and numerically. A Laser-Doppler velocimetry (LDV) system is used to measure the axial flow velocity distributions produced by the seven-cycle wake screen in the water tunnel. A customized underwater slip ring and a single axis accelerometer sealed by silicon sealant are employed to measure the acceleration responses of rotating propeller blade. Numerical simulations of pressure fluctuations on the blades are performed using large eddy simulation (LES), while the forced vibrations of the propeller blades are obtained by a combined finite element and boundary element method. Experimental and numerical results are presented for two model propellers with the same geometries and different flexible properties, which show that the propeller blade vibrates at a frequency which is seven times as large as the axial passing frequency (APF) in the seven-cycle inflow. Moreover, the propeller blades are observed to resonance when the 7 APF excitation frequency is equal to the fundamental frequency of the propellers. The results indicate that both the inflow feature and the modal characteristic of blades contribute to flow-induced vibrations of elastic propellers. 相似文献
15.
16.
An exact solution for the title problem is obtained in closed form fashion in the case of a Bernoulli–Euler beam. It is assumed that the exciting force is applied to the mass which is elastically mounted on the beam. The mathematical model constitutes a first order approximation to a motor or engine elastically mounted on a structural element. The operation of the machine generates a transverse, sinusoidally varying force. The problem is of basic interest in mechanical, naval and ocean engineering systems from the point of view of the determination of dynamic displacements and stresses; sound radiation calculations, etc. The present problem arose in connection with the mounting of an engine on a structural beam in a small naval vessel and when excessive vibrational level was noted. This study was undertaken in order to understand the physical problem and to correct the mechanical situation 相似文献
17.
Numerical solutions for the hydroelastic problems of bodies are studied directly in the time domain using Neumann–Kelvin formulation. In the hydrodynamic part of problem, the exact initial boundary value problem is linearized using the free stream as a basis flow, replaced by the boundary integral equation applying Green theorem over the transient free surface Green function. The resultant boundary integral equation is discretized using quadrilateral elements over which the value of the potential is assumed to be constant and solved using the trapezoidal rule to integrate the memory or convolution part in time. In the structure part of the problem, the finite element method is used to solve the hydroelastic problem. The Mindlin plate as a bending element, which includes transverse shear effect and rotary inertia effect are used. The present numerical results show acceptable agreement with experimental, analytical, and other published numerical results. 相似文献
18.
19.
The Reynolds effect and mass-damping effect on the peak amplitude of a freely vibrating cylinder is studied by using forced oscillating data from Gopalkrishnan＇ s research in 1993, in which all experimental cases were carried out at a fixed Reynolds and the tested cylinder was recognized as a body that had no mass and damping. However, the Reynolds and roass-damping are the very important parameters for the peak amplitude of a freely vibrating cylinder. In the present study, a function F is introduced to connect the forced oscillation and free vibration. Firstly the peak amplitude AG^＊ can be obtained from the function F using forced oscillation data of Gopalkrishnan＇ s experimental at Re = 10^4, and then the Reynolds effect is taken into account in the function f（Re）, while the mass-damping effect is considered in the function K（ α ）, where a is the mass-damping ratio. So the peak amplitude of a freely vibrating cylinder can be predicted by the expression： A ^＊ = K（ α ）f（ Re ）AG^＊ . It is found that the peak transverse amplitudes predicted by the above equation agree very well with many recent experimental data under both high and low Reynolds conditions while roass-damping varies. Furthermore, it is seen that the Reynolds number does have a great effect on the peak amplitude of a freely vibrating cylinder. The present idea in this paper can be applied as an update in the empirical models that also use forced oscillation data to predict the vortex induced vibration （VIV） response of a long riser in the frequency domain. 相似文献
20.
拖曳线列阵声纳中隔振模块研究 总被引：6，自引：0，他引：6
介绍了作为隔振模块研究依据的拖缆抖动特性的试验研究结果及隔振模块理论分析方法 ,给出了隔振模块有关参数变化对隔振量影响的理论值 ,提供了隔振模块隔振量试验方法 ,某隔振模块隔振量的测量结果以及装与不装隔振模块情况下 ,声阵的拖曳噪声声压谱级的测量结果 相似文献