共查询到19条相似文献，搜索用时 125 毫秒
1.
This is a numerical study on the time development of surface waves generated by a submerged body moving steadily in a two-layer fluid system, in which a layer of water is underlain by a layer of viscous mud. The fully nonlinear Navier–Stokes equations are solved on FLUENT with the Volume-of-Fluid (VOF) multiphase scheme in order to simulate the free surface waves as well as the water–mud interface waves as functions of time. The numerical model is validated by mimicking a reported experiment in a one-layer system before it is applied to a two-layer system. It is found that the presence of bottom mud in a water layer can lead to large viscous damping of the surface waves. To investigate the problem systematically, the effects of the Froude number and the mud layer thickness, density and viscosity relative to those of water are evaluated and discussed in detail. 相似文献
2.
On the basis of the time series observations from a temperature chain and an acoustic Doppler current profiler on the continental shelf of the northern South China Sea, a sequence of internal solitary waves （ISWs） and background waves （BWs, including internal tides and near-inertial waves） on the continental shelf were captured simultaneously after the transit of Typhoon Neast in October 2011. These measurementsprovided a unique opportunity to explore the influence of BWs on the ISWs. The BWs appeared a conversion on the current strength and vertical mode structure during the observational period. The BWs were dominated by weak and mode-one waves before October 2 and then turned to strong and high-mode waves after that time. Meanwhile, the ISWs displayed different wave structures before and after October 2, which was closely related to BWs＇ changes. According to the current profiles of BWs, the high-mode wave structure with strong current could significantly strengthen the vertical shear of ISWs in the near-surface layer and promote the breaking of ISWs, and thus it may play an important role in affecting the background current condition. 相似文献
3.
Numerical simulation of breaking wave generated sediment suspension and transport process based on CLSVOF algorithm 总被引：1，自引：0，他引：1
The sediment suspension and transport process under complex breaking wave situation is investigated using large eddy simulation （abbreviated as LES hereafter） method. The coupled level set （LS） and volume of fluid （VOF） method is used to accurately capture the evolution of air？water interface. The wall effect at the bottom is modeled based on the wave friction term while the complicate bottom boundary condition for sediment is tackled using Chou and Fringer’s sediment erosion and deposition flux method. A simulation is carried out to study the sediment suspension and transport process under periodic plunging breaking waves. The comparison between the results by CLSVOF method and those obtained by the LS method is given. It shows that the latter performs as well as the CLSVOF method in the pre-breaking weak-surface deformation situation. However, a serious mass conservation problem in the later stages of wave breaking makes it inappropriate for this study by use of the LS method and thus the CLSVOF method is suggested. The flow field and the distribution of suspended sediment concentration are then analyzed in detail. At the early stage of breaking, the sediment is mainly concentrated near the bottom area. During the wave breaking process, when the entrapped large-scale air bubble travels downward to approach the bottom, strong shear is induced and the sediment is highly entrained. 相似文献
4.
In order to study the mechanism of flow-sediment movement, it is essential to obtain measured data of water hydrodynamic and sediment concentration process with high spatial and temporal resolution in the bottom boundary layer （BBL）. Field observations were carried out in the northwest Caofeidian sea area in the Bohai Bay. Near 2 m isobath （under the lowest tidal level）, a tripod system was installed with AWAC （Acoustic Wave And Current）, ADCP （Acoustic Doppler Current Profilers）, OBS-3A （Optical Backscatter Point Sensor）, ADV （Acoustic Doppler Velocimeters）, etc. The accurate measurement of the bottom boundary layer during a single tidal period was carried out, together with a long-term sediment concentration measurement under different hydrological conditions. All the measured data were used to analyze the characteristics of wave-current-sediment movement and the BBL. Analysis was performed on flow structure, shear stress, roughness, eddy viscosity and other parameters of the BBL. Two major findings were made. Firstly, from the measured data, the three-layer distribution model of the velocity profiles and eddy viscosities in the wave-current BBL are proposed in the observed sea area; secondly, the sediment movement is related closely to wind-waves in the muddy coast area where sediment is clayey silt： 1） The observed suspended sediment concentration under light wind conditions is very low, with the peak value generally smaller than 0.1 kg/m^3 and the average value being 0.03 kg/m^3; 2） The sediment concentration increases continuously under the gales over 6-7 in Beaufort scale, under a sustained wind action. The measured peak sediment concentration at 0.4 m above the seabed is 0.15-0.32 kg/m^3, and the average sediment concentration during wind-wave action is 0.08-0.18 kg/m^3, which is about 3-6 times the value under light wind conditions. The critical wave height signaling remarkable changes of sediment concentration is 0.5 m. The results show that the suspended load sediment concentration is mainly influenced by wave-induced sediment suspension. 相似文献
5.
This paper studies the continuous evolution of breaking wave for the surface water waves propagating on a sloping beach. A Lagrangian asymptotic solution is derived. According to the solution coupled with the wave breaking criteria and the equations of water particles motion, the wave deformation and the continuous wave breaking processes for the progressive water waves propagating on a sloping bottom can be derived. A series of experiments are also conducted to compare with the theoretical solution. The results show that the present solution can reasonably describe the plunging or spilling wave breaking phenomenon. 相似文献
6.
Yang Shaoli Shen Weiquan Yang Zuosheng
Assistant The Institute of Estuarine Coastal Studies Ocean University of Qingdao Qingdao . Professor The Institute of Estuarine Coastal Studies Ocean University of Qingdao Qingdao 《中国海洋工程》1995,(4)
The sediment in Chengbei area of the Huanghe (Yellow River) subaqueous delta is the object of a reseach project in this article. The accumulating and dissipating effects following the change of time are considered first in the study area and the distributing curves of excess pore water pressure along with time and depth in the soil stratum are gained; the possibility of silt liquefaction is evaluated using the computing values and the affecting depth of liquefaction is given. This paper quantitatively analyzes the dynamic response of seafloor soil under the cyclic loading of waves and makes an inquiry into the instable mechanism of soil. 相似文献
7.
Owing to the interactions among the complex terrain, bottom materials, and the complicate hydrodynamics, typhoon waves show special characteristics as big waves appeared at the high water level(HWL) and small waves emerged at low and middle water levels(LWL and MWL) in radial sand ridges(RSR). It is assumed that the mud damping, sandy bed friction and wave breaking effects have a great influence on the typhoon wave propagation in this area. Under the low wave energy, a mud layer will form and transport into the shallow area, thus the mud damping effects dominate at the LWL and the MWL. And high Collins coefficient(c around 1) can be applied to computing the damping effects at the LWL and the MWL. But under the high wave energy, the bottom sediment will be stirred and suspended, and then the damping effects disappear at the HWL. Thus the varying Collins coefficient with the water level method(VCWL) is implemented into the SWAN to model the typhoon wave process in the Lanshayang Channel(LSYC) of the RSR, the observed wave data under "Winnie"("9711") typhoon was used as validation. The results show that the typhoon wave in the RSR area is able to be simulated by the VCWL method concisely, and a constant wave breaking coefficient(γ) equaling 0.78 is better for the RSR where wide tidal flats and gentle bed slopes exist. 相似文献
8.
Air lubrication by means of a bottom cavity is a promising method for ship drag reduction. The characteristics of the bottom cavity are sensitive to the flow field around the ship hull and the effect of drag reduction, especially the depth of the bottom cavity. In this study, a ship model experiment of a bulk carrier is conducted in a towing tank using the method of air layer drag reduction(ALDR) with different bottom cavity depths. The shape of the air layer is observed, and the changes in resistance are measured. The model experiments produce results of approximately 20%for the total drag reduction at the ship design speed for a 25-mm cavity continuously supplied with air at Cq = 0.224 in calm water, and the air layer covers the whole cavity when the air flow rate is suitable. In a regular head wave, the air layer is easily broken and reduces the drag reduction rate in short waves, particularly when λ/Lw1 is close to one;however, it still has a good drag reduction effect in the long waves. 相似文献
9.
Based on the full water-wave equation,a second-order analytic solution for nonlinear interaction of short edge waves on a plane sloping bottom is presented in this paper.For special case of slope angle β=π/2,this solution can reduced to the same order solution of deep water gravity surface waves traveling along parallel coastline.Interactions between two edge waves including progressive,standing and partially reflected standing waves are also discussed.The unified analytic expressions with transfer functions for kinematic-dynamic elements of edge waves are also given.The random model of the unified wave motion processes for linear and nonlinear irregular edge waves is formulated,and the corresponding theoretical autocorrelation and spectral density functions of the first and the second orders are derived.The boundary conditions for the determination of the parameters of short edge wave are suggested,that may be seen as one special simple edge wave excitation mechanism and an extension to the sea wave refraction theory.Finally some computation results are demonstrated. 相似文献
10.
Dai Yishan He Wuzhou Professor Harbin Shipbuilding Engineering Institute Harbin
Associate Professor Harbin Shipbuilding Engineering Institute Harbin 《中国海洋工程》1993,(3)
- Generated by an ideal sinusoidal motion of the vertical plate, the simplest linear solution in time domain for two-dimensional regular waves is derived. The solution describes the propagation process of the plane progressive wave with a front, and will approach the linear steady- state solution as the oscillation time of the plate approaches infinity. The solution presented in this paper can be used to provide an incident wave model with analytical expression for solving the problems of diffraction and response of floating bodies in time domain. 相似文献
11.
根据现场大风浪条件下的实测资料,粉质土海岸水体中的含沙量沿垂向具有上部均匀、近底突增的分布特点,即呈L型分布特征。利用黄河三角洲粉质土作为试验底床开展波浪水槽试验研究,揭示了底床粉质土在波浪作用下产生液化情况的水体含沙量沿垂向存在L型分布特征。根据试验现象以及悬沙粒度变化,分析认为底部高含沙层的形成主要受粉质土液化后细颗粒析出的影响,上部水体中悬沙由湍流脉动维持。对粉质土海岸大风天气期间水体含沙量剧烈增加采用波致粉质土液化的观点进行了初步解释。 相似文献
12.
In order to study the mechanism of flow-sediment movement, it is essential to obtain measured data of water hydrodynamic and sediment concentration process with high spatial and temporal resolution in the bottom boundary layer (BBL). Field observations were carried out in the northwest Caofeidian sea area in the Bohai Bay. Near 2 m isobath (under the lowest tidal level), a tripod system was installed with AWAC (Acoustic Wave And Current), ADCP (Acoustic Doppler Current Profilers), OBS-3A (Optical Backscatter Point Sensor), ADV (Acoustic Doppler Velocimeters), etc. The accurate measurement of the bottom boundary layer during a single tidal period was carried out, together with a long-term sediment concentration measurement under different hydrological conditions. All the measured data were used to analyze the characteristics of wave-current-sediment movement and the BBL. Analysis was performed on flow structure, shear stress, roughness, eddy viscosity and other parameters of the BBL. Two major findings were made. Firstly, from the measured data, the three-layer distribution model of the velocity profiles and eddy viscosities in the wave-current BBL are proposed in the observed sea area; secondly, the sediment movement is related closely to wind-waves in the muddy coast area where sediment is clayey silt: 1) The observed suspended sediment concentration under light wind conditions is very low, with the peak value generally smaller than 0.1 kg/m3 and the average value being 0.03 kg/m3; 2) The sediment concentration increases continuously under the gales over 6-7 in Beaufort scale, under a sustained wind action. The measured peak sediment concentration at 0.4 m above the seabed is 0.15-0.32 kg/m3, and the average sediment concentration during wind-wave action is 0.08-0.18 kg/m3, which is about 3-6 times the value under light wind conditions. The critical wave height signaling remarkable changes of sediment concentration is 0.5 m. The results show that the suspended load sediment concentration is mainly influenced by wave-induced sediment suspension. 相似文献
13.
海底石油管线泄漏可能导致海床内部形成高浓度石油污染。在波浪作用下，海床沉积物易发生再悬浮甚至液化失稳现象，进而导致海床内部石油类污染物通过多种途径向水体再次释放并在土体内部发生迁移，造成更大范围的石油扩散。本研究以总石油烃（Total Petroleum Hydrocarbon,TPH）设为代表性污染物，将污染泥浆以椭球状埋设在沉积物内部，采用波浪水槽试验研究不同强度波浪作用下TPH向上覆水体的释放规律及在沉积物内部的迁移规律。结果表明，在沉积物静置固结阶段前期，TPH随孔隙水由沉积物向上覆水体迁移释放，固结阶段前期TPH向上覆水体的释放量高于后期。在波浪作用未引起沉积物液化阶段，波浪促进石油类污染物向水体释放的作用较弱，由于悬浮泥沙对石油类污染物的吸附作用，水体中石油类污染物的浓度略低于静置固结阶段。在波浪作用引起沉积物液化阶段，随着悬浮泥沙浓度升高，TPH向上覆水体释放量加大；TPH在沉积物内部垂向迁移及平面扩散迁移距离加大，平面迁移距离大于垂向迁移距离，垂向扩散深度与液化深度基本一致，污染土体体积占比约为土体未液化时的3倍。 相似文献
14.
The impact of wave loads and pore-water pressure generation on initiation of sediment transport 总被引：3，自引：0，他引：3
Edward C. Clukey Fred H. Kulhawy Philip L. -F. Liu George B. Tate 《Geo-Marine Letters》1985,5(3):177-183
The build-up of pore-water pressure by waves can lead to sediment liquefaction and subsequent transport by traction currents. This process was investigated by measuring pore-water pressures both in a field experiment and laboratory wave tank tests. Liquefaction was observed in the wave tank tests. The results suggest that sand is less susceptible than silts to wave-induced liquefaction because of the tendency to partially dissipate pore-water pressures. However, previous studies have determined that pore-water pressures must approach liquefaction before current velocities necessary to initiate transport are reduced. Once liquefaction has occurred more sediment can be transported. 相似文献
15.
The intertidal erosion rate of cohesive sediment: a case study from Long Island Sound 总被引：2，自引：0，他引：2
Over the past decades, many attempts have been made to generate useful bottom erosion models for the study of cohesive sediment movement. This study addresses some of the key questions involved in determining the functional relationship between erosion rate and bottom shear stress. Current, wave, and turbidity data were collected from a bottom mounted instrument array in a moderately energetic estuarine environment. The bottom shear stress was calculated from a wave–current interaction model. The erosion rate was derived from the observed sediment concentration using a vertical mixing model. Examination of the relationship between erosion rate and bottom stress showed that the erosion rate varied at intertidal frequency. When averaged over the tidal fluctuation, the erosion rate remained approximately constant at low stress, but increased sharply when the shear stress rose above a critical value. This suggests two-stage erosion. The bed has a layered structure, in which a thin layer of loose, high water content material overlies a more consolidated bed. The top layer of high water content material (fluff) was easily disturbed and re-suspended by tidal currents, but the consolidated bottom layer was eroded only under conditions of high shear stress. 相似文献
16.
C. C. Liao 《Marine Georesources & Geotechnology》2013,31(9):1149-1150
AbstractThe excess pore pressure accumulation is a key factor when estimating the formation mechanism of large pockmarks, as it determines the liquefaction potential of marine sediments due to water waves. The governing equations for excess pore pressure may have different forms for various types of sediments and then shall reflect the cyclic plasticity of the soil. For water waves propagating over a porous seabed, the liquefaction area induced by waves is generally progressive, which indicates that the liquefaction area will move forward following the wave train. Therefore, the excess pore pressure accumulation can be used to explain the occurrence of the large pockmarks, but the dimension of the pockmark may be related to the heterogeneity of sediment or the wave properties affected by the topography in the subaqueous Yellow River Delta. 相似文献
17.
《Coastal Engineering》1999,36(1):59-85
Simple theoretical models to determine the equilibrium profile shape under breaking and non-breaking waves are presented. For the case of breaking waves, it is assumed that the seaward transport in the undertow is locally balanced by a net vertical sedimentation, so that no bottom changes occur at equilibrium. The parameterization of the water and sediment flux in the surf zone yields a power curve for the equilibrium profile with a power of 2/3, which is in agreement with previous field investigations on surf zone profile shapes. Three different models were developed to derive the profile shape under non-breaking waves, namely (1) a variational formulation where the wave energy dissipation in the bottom boundary layer is minimized over the part of the profile affected by non-breaking waves, (2) an integration of a small-scale sediment transport formula over a wave period where the slope conditions that yield zero net transport determine equilibrium, and (3) a conceptual formulation of mechanisms for onshore and offshore sediment transport where a balance between the mechanisms defines equilibrium conditions. All three models produced equilibrium profile shapes of power-type with the power typically in the range 0.15–0.30. Comparison with field data supported the results obtained indicating different powers for the equilibrium profile shape under breaking and non-breaking waves. 相似文献
18.
本文利用波浪水槽试验,对底床粉质土液化状态下水体垂向含沙量分布特征进行了研究。试验结果表明,波浪导致粉质土液化情况下,水体含沙量在近底边界层出现激增,含沙量垂向分布形态呈现出近于L型的特征。 相似文献
19.
黄河三角洲海底土波致再悬浮研究 总被引：1，自引：1，他引：0
在现代黄河三角洲采集土样,制备室内水槽试验的底床,施加波浪作用,观测波致悬沙含量的变化规律,分析不同波高、作用时间对单位面积底床再悬浮量的影响,及波浪停止作用后悬浮泥沙的静水沉降规律。研究发现,在水深一定条件下底床再悬浮量呈现随波高增大而增大的特性,两者线性拟合的相关性很好;在一定波高的波浪连续作用下,约5 000~6 000个波周期底床再悬浮过程完成;在波浪作用初始阶段底层悬沙含量与中上层的相差很大,悬沙含量垂线结构呈斜线型,稳定阶段的悬沙浓度垂向结构呈准直线型,底层与表层含沙量比值为0.98~1.25,整个水层含量分布均匀;静水沉降过程中当悬沙含量大于1 g/dm3,悬沙含量(SSC)呈现出随时间指数衰减的规律,悬沙浓度与沉降通量呈线性关系。研究结果对认识黄河水下三角洲泥沙运移规律具有一定的科学意义。 相似文献