共查询到20条相似文献，搜索用时 31 毫秒
1.
复合加载下桶形基础循环承载性能数值分析 总被引：1，自引：0，他引：1
作为一种新型基础形式,吸力式桶形基础除了承受海洋平台结构及自身重量等竖向荷载的长期作用之外,往往还遭受波浪等所产生的水平荷载及其力矩等其它荷载分量的瞬时或循环作用。对复合加载模式下软土地基中桶形基础及其结构的循环承载性能尚缺乏合理的分析与计算方法。应用Andersen等对重力式平台基础及地基所建议的分析方法,基于软黏土的循环强度概念,在大型通用有限元分析软件ABAQUS平台上,通过二次开发,将软土的循环强度与Mises屈服准则结合,针对吸力式桶形基础,基于拟静力分析建立了复合加载模式下循环承载性能的计算模型,并与复合加载作用下极限承载性能进行了对比。由此表明,与极限承载力相比,桶形基础的循环承载力显著降低。 相似文献
2.
3.
为了研究循环载荷作用下扶强材初始损伤对其极限强度的影响,进行了14组扶强材的循环加载试验和分析。构造了考虑材料累积损伤完整、断筋和大变形的扶强材单元极限承载力计算公式,提出了相应循环载荷作用下损伤扶强材单元的端缩曲线表达式和船体梁极限强度计算的简化逐步破坏法。编制了循环载荷作用下船体梁损伤极限强度计算程序,进行了船体梁极限强度计算,并与有限元结果进行对比。研究结果表明：改进的损伤扶强材模型可较为准确地描述扶强材材料损伤的完整、断筋和大变形的极限承载力退化情况,扶强材腹板断裂的损伤相较初始大变形及材料累积损伤形式承载力下降程度更明显;所提出的循环载荷作用下损伤船体梁极限强度计算的简化逐步迭代方法,能定量地计算扶强材在不同类型损伤下的极限承载力退化程度,具有较高精度,方便易行,可应用于工程设计。 相似文献
4.
利用带误差控制的显式积分算法,将一种适用于饱和砂土排水循环动力分析的边界面塑性模型编写成可供有限元软件调用的用户自定义材料子程序。建立土体单元有限元数值模型对Toyoura砂的静、动排水三轴试验进行模拟,验证了模型具备合理描述砂土在不同荷载条件下力学响应的能力。建立饱和砂土中板锚循环承载分析的数值模型,针对板锚在砂土中的单调抗拔特性和循环承载特性进行数值分析,得到了与模型试验一致的荷载—位移响应规律。考察循环荷载要素对板锚循环承载特性的影响,结果发现,随着循环荷载的施加,板锚永久位移逐渐累积,循环荷载会导致板锚持续移动,循环幅值越大,初始位移和位移变化率越大;循环均值越大,初始位移越大,但位移变化率越小。 相似文献
5.
AbstractPile foundation is the most popular option for the foundation of offshore wind turbines. The degradation of stiffness and bearing capacity of pile foundation induced by cyclic loading will be harmful for structure safety. In this article, a modified undrained elastic–plastic model considering the cyclic degradation of clay soil is proposed, and a simplified calculation method (SCM) based on shear displacement method is presented to calculate the axial degradated capacity of a single pile foundation for offshore wind turbines resisting cyclic loadings. The conception of plastic zone thickness Rp is introduced to obtain the function between accumulated plastic strain and displacement of soil around pile side. The axial ultimate capacity of single piles under axial cyclic loading calculated by this simplified analysis have a good consistency with the results from the finite element analysis, which verifies the accuracy and reliability of this method. As an instance, the behavior of pile foundation of an offshore wind farm under cyclic load is studied using the proposed numerical method and SCM. This simplified method may provide valuable reference for engineering design. 相似文献
6.
Numerical Analyses of Caisson Breakwaters on Soft Foundations Under Wave Cyclic Loading 总被引：1，自引：0，他引：1 
下载免费PDF全文
下载免费PDF全文 A caisson breakwater is built on soft foundations after replacing the upper soft layer with sand. This paper presents a dynamic finite element method to investigate the strength degradation and associated pore pressure development of the intercalated soft layer under wave cyclic loading. By combining the undrained shear strength with the empirical formula of overconsolidation clay produced by unloading and the development model of pore pressure, the dynamic degradation law that describes the undrained shear strength as a function of cycle number and stress level is derived. Based on the proposed dynamic degradation law and M-C yield criterion, a dynamic finite element method is numerically implemented to predict changes in undrained shear strength of the intercalated soft layer by using the general-purpose FEM software ABAQUS, and the accuracy of the method is verified. The effects of cycle number and amplitude of the wave force on the degradation of the undrained shear strength of the intercalated soft layer and the associated excess pore pressure response are investigated by analyzing an overall distribution and three typical sections underneath the breakwater. By comparing the undrained shear strength distributions obtained by the static method and the quasi-static method with the undrained shear strength distributions obtained by the dynamic finite element method in the three typical sections, the superiority of the dynamic finite element method in predicting changes in undrained shear strength is demonstrated. 相似文献
7.
The floating bridge bears the dead weight and live load with buoyancy, and has wide application prospect in deep-water transportation infrastructure. The structural analysis of floating bridge is challenging due to the complicated fluid-solid coupling effects of wind and wave. In this research, a novel time domain approach combining dynamic finite element method and state-space model (SSM) is established for the refined analysis of floating bridges. The dynamic coupled effects induced by wave excitation load, radiation load and buffeting load are carefully simulated. High-precision fitted SSMs for pontoons are established to enhance the calculation efficiency of hydrodynamic radiation forces in time domain. The dispersion relation is also introduced in the analysis model to appropriately consider the phase differences of wave loads on pontoons. The proposed approach is then employed to simulate the dynamic responses of a scaled floating bridge model which has been tested under real wind and wave loads in laboratory. The numerical results are found to agree well with the test data regarding the structural responses of floating bridge under the considered environmental conditions. The proposed time domain approach is considered to be accurate and effective in simulating the structural behaviors of floating bridge under typical environmental conditions.
相似文献8.
9.
10.
Considering the current disadvantages of present offshore wind turbine foundations, a novel anchor foundation with skirt and branches is proposed, called offshore umbrella suction anchor foundation (USAF). A series of experiments and numerical simulations were performed to explore the bearing capacity of the USAF under various kinds of loading modes. The bearing characteristics and the anchor–soil interactions are described in detail for horizontal static loading, horizontal cyclic loading, and an antidrawing (pullout) test in silty soil. In the static loading test, the load–deflection of the anchor under step loading was analyzed and the normalized curve of the load–deflection was obtained to determine the ultimate horizontal bearing capacity of the anchor under normal working conditions. Under horizontal cyclic loading, the relationship between the plastic cumulative deformation and cyclic number was determined. In addition, the responses of USAF were investigated for a low wave frequency and storm surges. In the drawing test, it was found that a “segmentation phenomenon” occurred during the test. Moreover, a method to identify the maximum antidrawing load of USAF was provided based on dynamic mechanics. The numerical results show that the use of anchor branches and skirt can enhance the bearing performance of USAF to a certain degree. However, the anchor branch has a slight positive influence on the bearing performance improvement. The USAF is not only similar to a stiff short pile, but a rotation occurs. The failure envelope under composite loading (V-M) was obtained and the changes associated with changes in the aspect ratio of the internal compartment were clarified. 相似文献
11.
The shock wave and cavitation are main effects in the far-field underwater explosion, which could cause serious damage to marine structures. In this paper, the fluid mechanical behavior of blast load is described by the propagation of pressure wave. The acoustic pressure caused by far-field explosion is determined by solving the wave equation, where a strongly discontinuous axisymmetric numerical model is established with the local discontinuous Galerkin (LDG) method. The model can calculate the dynamic pressure in the fluid field and capture the high-resolution shock wave. The pressure cutoff model is employed to deal with the cavitation effect due to the reflection of the shock wave. The numerical model is verified by comparing with the analytical solution of the cavitation effect near the structure in one dimension. With the same mesh discretization, the present model shows higher precision than the results calculated by the acoustic finite element method. In addition, the propagation of shock wave in the cylindrical water column is studied. Finally, the formation, growth and collapse of the cavitation region near the free surface are simulated. The LDG model can remove the spurious oscillations behind the shock front and it’s more accurate than the results of the acoustic finite element method, in terms of capturing the sharpness of shock wave and calculating the shock and cavitation loading. And the present model can be applied to calculate the structural damage caused by shock wave in three dimensions. 相似文献
12.
破碎波浪砰击于导管架等海洋工程结构,产生瞬态强载荷及长时振动。高刚度金属结构可抵抗瞬时强载,但金属固有阻尼极低而难以有效抑制振动,从而加剧结构损伤乃至失效。为使单一结构同时具有高刚度和高阻尼,设计一种多稳态夹芯金属压杆,有限元模拟表明该类压杆稳态随循环载荷依序转换,对应刚度变化使力—位移间产生滞后关系,使高刚度金属压杆具有高效耗散能力;采用夹芯结构弹性理论和发展变边界结构稳定理论,给出了该类压杆的稳态转换阈值和刚度变化过程,与有限元模拟一致;以有限元模拟方法获得了承载和阻尼特性的几何参数相关性;以该类压杆替换导管架斜撑,用有限元方法模拟瞬态强载下结构振动,计算结果表明多稳态夹芯金属压杆保证导管架高刚度同时显著增强了阻尼。 相似文献
13.
—Presented is the numerical analysis of settlements of soft soil by a 2-D dynamic effective stressFEM method.The model based on the results of cyclic triaxial tests on the reconstituted soft Ariake clay isused to predict the wave induced excess pore water pressure and residual strain of soft clay.The settle-ments of two types of breakwaters on the soft clay under ocean wave load,a low embankment subjected totraffic load and the tunnel surrounded by soft clay in Shanghai subjected to locomotive load are calculatedas examples. 相似文献
14.
Suction caissons are considered as an alternative foundation solution for offshore wind turbines. In the present study, three-dimensional finite element (FE) analyses are performed to assess the behavior of a bucket foundation and soil supporting the bucket under cyclic and monotonic loading conditions. A parametric study is also performed for a wide range of bucket geometries and two different soil densities. The results indicate that bucket geometry and soil properties significantly affect the foundation response due to cyclic loading conditions. The bucket with the smallest geometry installed in medium dense soil exhibits the lowest stiffness in initial loading and then with the progress of cyclic loads experiences lower stiffness compared to the caissons with larger geometries. The sensitivity of the foundation response to the soil density is higher than its geometry. The bucket under the lowest vertical load experiences the lowest stiffness in both virgin loading and during the progress of cyclic loads. The highest soil displacement is observed near the lid at the interior of the bucket. Stresses caused by cyclic loading belong to certain ranges. Additionally, increases in the skirt length result in increases in the stress ranges and shift the range to the right side. With respect to the monotonic loading conditions, normalized diagrams are proposed that can be used for the preliminary design of suction bucket foundations. 相似文献
15.
浅水区波浪非线性效应对砂质海床动力响应的影响 总被引：4，自引：2，他引：2
以广义Biot动力固结理论为基础,运用一阶椭圆余弦波和二阶Stokes波等非线性波浪理论考虑浅水区波浪荷载的非线性效应,在时域上采用有限元方法对非线性波浪力作用下饱和砂质海床的动力响应进行了数值求解,并与线性波浪作用下海床动力响应特性进行了对比分析。结果表明,随着波长与水深之比L／d及无量纲参数T(g/d)^1/2的增大,非线性波浪对海床动力响应的影响增大。与线性波浪理论相比,孔隙水压力与有效应力幅值的增大效应非常显著。因此在近海海洋建筑物设计与工程场地评价中,波浪力的非线性特性必须引起注意。 相似文献
16.
Guo-Wei Li Thang Ngoc Nguyen Andrew Cudzo Amenuvor 《Marine Georesources & Geotechnology》2016,34(2):154-161
This article studies the effect of dynamic cyclic loading and surcharge preloading method on the post-construction settlement of low embankments. Soil samples obtained from the soft ground under an embankment were consolidated by surcharge preloading followed by static and dynamic cyclic loading in the odometer. The results show that the consolidation deformation of the soil samples is independent of the frequency of the dynamic cyclic loading, which was simulated to follow the half-sine wave, and this is consistent with the energy concept. The post-construction settlement increases with increasing amplitude of cyclic load and the effectiveness of surcharge preloading depends on the difference between magnitude of surcharge and amplitude of the cyclic load. Based on the consolidation theory combined with the test results, a formula has been proposed to compute the post-construction settlement of a low embankment under cyclic loading. 相似文献
17.
以一6.7 MW风机为研究对象，提出了一种适用于30~50 m水深的海上风电倒Y形导管架筒型基础结构型式，采用三维精细有限元模型对结构的受力特性展开研究，包括结构的自振特性以及在随机风浪流荷载作用下的动力响应。研究结果表明，倒Y形导管架筒型基础采用“三腿变六腿”导管架的结构型式，能够更加有效的将上部荷载传递至下部筒型基础，具有较好的受力特性和传力体系；整机结构的前两阶自振频率均在风机允许运行的频率范围内；在50年一遇极端随机风浪流荷载作用下，整机结构的位移响应和应力响应，均可满足结构安全使用要求。 相似文献
18.
High-pile and beam-slab quays have been widely used after several years development. They are mature enough to be one of the most important structural types of wharves in China coastal areas. In order to accommodate large tonnage vessels, wharves should be eorrstructed in deep water gradually. However, conventional high-pile and beam-slab structares are hard to meet the requirements of large deep-water wharf. According to arch＇ s stress characteristics, a new type of wharf with catenary arched longitudinal beams is presented in this paper. The new wharf structure can make full use of arch＇s overhead crossing and reinforced concrete compression resistance, improve the interval between transverse bents greatly, and decrease underwater construction quantity. Thus, the construction cost cab be reduced. Take the third phase project of the Yangshan Deep-water Port for example, comparative analysis on catenary arched longitudinal beams and conventional longitudinal beams has been made. The result shows that with the same wharf length and width, the same loads and same longitudinal beam moment, catenary arch structure can improve the interval between bents up to 28 m, decrease the nmnber of piles and underwater construction quantity. 相似文献
19.
Suction buckets differ with their easy and cost-efficient installation technique from other foundation types for offshore wind turbines. For successful completion of their installation process, suction is essential, but the imposed seepage leads to the changes in states of the soil in and around the bucket. Especially, a loosening of soil inside the bucket affects the load carrying behaviour of bucket subjected to repetitive loading resulting from environmental conditions. In this study, the behaviour of buckets under cyclic axial compressive loads with considering a possible loosening and related changes in permeability of soil inside the bucket is investigated numerically. In the framework of finite element analysis, a fully coupled two-phase model and a hypoplastic constitutive model are used to describe the saturated sandy soil behaviour under repetitive loading. The porosity-permeability variation is taken into account by Kozeny–Carman relationship. Special attention is dedicated to load carrying behaviour of bucket top plate, inner and outer skirt as well as base and their changes resulting from a loosening of soil inside the bucket with variable aspect ratio. For this purpose, cyclic axial compressive loads which cause an attenuation and progressive failure of soil-bucket system response are considered. The main findings on the changes in load carrying behaviour of bucket are presented and discussed. 相似文献
20.
海上风电工程主要受到风、波浪及洋流等产生的水平循环荷载作用，本文研究楔形单桩基础在水平循环荷载作用下的变形规律，并探讨不同循环荷载对变形规律产生的影响，以确保风电设施正常运行。通过数值模拟建立海上风电单桩-海床模型，考虑土体超孔隙水压力的演变规律及土体致密规律，土体采用UBC3D-PLM本构模型。本文重点讨论并分析在不同水平循环荷载作用下楔形单桩基础与等截面单桩基础的桩周土体位移、塑性应变及桩基累计转角位移之间的差异。研究结果表明：楔形结构会降低桩周土体位移及塑性应变，使得楔形单桩基础旋转中心位置更低，产生倾覆的可能更小，当循环荷载比为0.7时，累计转角位移能减少41.86%；循环荷载越大，楔形单桩基础水平受荷特性越好，累计位移减少量的增长率越高。研究成果可为今后海上风电基础的选择与设计提供参考。 相似文献