共查询到17条相似文献，搜索用时 125 毫秒
1.
海上支撑结构的优化设计是海上风机技术发展的必然趋势，降低支撑结构的载荷是保证风机安全运行的有效途径。海上支撑结构受到风浪复杂环境荷载作用，风、浪载荷决定着塔底承受较大的剪力和倾覆力矩，同时风浪的随机性和周期性会影响塔架的疲劳载荷。基于海上风机支撑结构频率对载荷影响的研究，分析海上支撑结构频率对叶片根部挥舞和摆振响应的影响，探究频率对风机响应的影响机理。研究表明：波浪频率诱导是基础疲劳载荷响应的主要原因；开展单桩基础设计，当整机频率确定时，基础变径段可设置于浪溅区下部区域范围；叶片摆振响应受1P频率影响较大，在风机设计时可增加叶片摆振方向的阻尼；当整机频率邻近3P频率时，塔筒刚度变化对基础载荷响应的影响大于基础刚度变化；海上支撑结构设计时可优先考虑塔筒刚度。 相似文献
2.
多筒型导管架基础下放安装过程筒顶开口,筒内气—水自由置换,浪溅区下放过程由于浮力、冲击载荷、附加质量、阻尼效应等因素影响具有很强的非线性。开展模型试验研究波浪荷载下外界控制因素对四筒导管架基础下放过程气垫响应、基础运动和吊缆张力响应的影响机理,探究气垫结构对基础下放过程附加质量和固有周期的影响。结果表明：初始下放过程,筒内气体积聚,气垫压力非线性增长,随着下放深度增大,气垫压力趋于稳定;气垫压力响应趋势与基础下放速度和开孔率相关,波浪荷载仅影响气垫响应幅值;筒型基础下放穿越浪溅区阶段受到砰击荷载作用,气垫结构对砰击荷载产生缓冲效果;考虑气垫—水柱耦合作用时,顶盖即将入水阶段,气弹簧和水弹簧耦合作用下整体刚度增大,基础固有周期出现减小趋势。 相似文献
3.
4.
“埕岛二号”中心平台非灌浆腿导管架结构设计 总被引：7，自引：0，他引：7
结合“埕岛二号”生活平台介绍了非灌浆腿导管架的结构分析的细部构造设计计算,将其受力性能与常规导管架作了对比总结了该结构型式的导管架在结构设计时应注意的问题。 相似文献
5.
通过对平台在风浪作用下的振动测试分析,发现了直立式非灌浆桩腿导管架平台在海底冲刷条件下发生异常振动的原因是导管架与桩之间存在较大的相对运动,以至于在风浪较大时发生碰撞。因而,结构的动力特性和动态响应都与设计结果不一致。在非极值海况条件下,平台的振动超出了设计预测值,并提出了治理和设计建议。 相似文献
6.
海上风电基础结构动力分析 总被引：1，自引：0，他引：1
针对单桩、三桩、四桩导管架3种常规海上风电基础结构型式动力特性展开研究。以模态分析为基础,获得结构整体固有频率和振型;进而综合运用谐响应分析、瞬态分析、谱分析等方法,对基础结构在简谐荷载、冲击荷载、地震荷载及波浪荷载作用下的动力响应特性进行了数值模拟计算和分析。结果显示:本设计中的单桩、三桩、四桩基础结构刚度依次增大,一阶固有频率递增;对于相同的动力荷载激励,基础结构动力响应递减;基础结构设计中既要保证结构具有足够的刚度以满足荷载作用下的变形控制要求,还要使基础刚度适中以避免共振。为海上风电基础结构动力分析提供了参考。 相似文献
7.
针对船舶与中空夹层钢管混凝土（CFDST）导管架平台碰撞问题，利用ABAQUS/Explicit非线性有限元软件建立中空夹层钢管混凝土导管腿导管架数值模型，对船舶碰撞进行数值模拟，对比分析1 m/s、2 m/s和3 m/s的3种碰撞速度下工况下导管架抗碰撞性能、耗能及损伤。从碰撞力、碰撞区域变形以及导管架能量耗散等方面详细研究中空夹层钢管混凝土导管腿作用下导管架整体的损伤模式和动力响应。结果表明：CFDST导管架在船舶碰撞荷载作用下主要由CFDST导管腿耗能，有效控制了结构整体位移变形，提升了整体刚度，有效发挥平台各构件之间组合耗能，结构抗碰撞能力得到明显提升。 相似文献
8.
9.
以Spar型浮式风机为研究对象,研究涡激力对于浮式风机系统运动的影响。对多体动力学软件FAST进行二次开发,加入涡激力的计算接口,实现了在平台涡激、波激、空气动力载荷及系泊联合作用下的Spar浮式风机系统的运动响应的计算。计算了在风、浪、流联合作用下,频率锁定现象发生时,Spar基础的运动响应,分析了风浪下Spar风机运动响应的涡激运动特性,并研究了不同的入流角度的影响。结果表明:考虑涡激力后,Spar基础的横荡运动明显增大;风浪流同向时,风浪的存在会抑制流载荷引起的横荡在涡泄频率的运动;在流与风浪垂直时,会激发Spar基础的更大的纵荡运动响应。 相似文献
10.
吸力式导管架基础具备高承载力、高施工效率、高环境友好度、低造价等特点，使用其作为海上风电底部支撑结构有利于产业的规模化发展，实现上述愿景的前提在于使筒型基础顺利安装以满足设计要求。基于此，在不同初始施加泵压下，对吸力式导管架的沉贯效率特征值、基础内外围渗流变化、筒裙端部土压力特点进行探究。通过抱桩器使吸力式导管架在吸力安装过程中仅具备竖向自由度，从而进行纯沉贯试验。结果表明：初始泵压2 kPa时沉贯效率特征值最高；沉贯过程中基础外围渗流水压小于基础内围渗流水压；筒裙外侧所受土压要大于筒壁内侧所受土压力。 相似文献
11.
为了得到桶基础承受风、浪动荷载的承载性能，结合我国东海地质条件，统计中国东海2010—2020年浅、深海风速和最大海浪数据，通过计算得到风浪荷载并制成ABAQUS软件幅值曲线施加到海上风电吸力桶基础上，分析了吸力桶基础在动荷载作用下的承载特性。结果表明：吸力桶基础受风、浪荷载影响明显，桶基础迎力面受到风浪动荷载产生拉拔现象。在浅海区，桶基础在风浪荷载作用下桶身自上而下变形不协调，风浪荷载最大的10月份桶基础迎力面最大位移超出了规范0.02D的限制，基础失稳；桶基础背力面受压变形较小。在深海区，桶基础在风浪荷载作用下桶身自上而下变形相对协调，施加风浪荷载后桶体迎力面最大位移为14.9 mm，整体上迎力面位移比背力面位移大4 mm，桶体处于稳定状态。相较浅海区的吸力桶单桶结构，深海区吸力桶结构由于尺寸增加，桶体的稳定性得到提高，说明吸力桶结构的尺寸对稳定性起决定性作用。 相似文献
12.
风机基础作为海上风机整体结构的重要组成部分,承受着上部风机所受到的风浪流荷载,并且对风机的安全性及可靠性至关重要。吸力式桶形基础由于其安装简单和可重复利用等优点,在海洋平台基础中得到了广泛应用,并逐步应用于海上风机基础中。但由于海上风机与海洋平台在海洋环境中的荷载工况有一定的差别,仍需要通过对其承载特性研究现状进行全面认识,以实现吸力式桶形基础在海上风机基础中的可靠应用。文中通过总结和评价现有研究对桶形基础在不同土体条件以及荷载条件下进行试验及数值模拟分析得到的研究结果,综述了静荷载和循环荷载作用下砂土和黏土中的吸力式桶形基础的承载特性研究现状,以及海上风机吸力式桶形基础的相关研究。文章展望了目前应用于海上风机基础的桶形基础仍缺乏的研究,为海上风机吸力式桶形基础的可靠应用及后续研究提供重要参考。 相似文献
13.
研究浅水半潜式大功率浮式风力机波浪载荷和气动力引起的基础结构疲劳损伤,揭示基础结构的疲劳损伤机理。采用谱疲劳损伤计算分析方法,以10 MW风力机为例,计算波浪载荷引起的热点应力及多种海况引起的疲劳损伤。采用叶素动量理论并基于所在海域的风速分布,计算叶轮转动引起的气动力及其引起的疲劳损伤。计算结果表明,对于半潜式三立柱浮式风力机,波浪载荷引起的基础结构应力远大于气动力引起的基础结构应力,基础结构损伤主要是由波浪载荷引起,气动力引起的浮式基础结构的损伤为10-3量级,而波浪载荷引起的损伤为10-1量级。 相似文献
14.
As the offshore wind turbine foundation, the four-bucket jacket foundation has a large stiffness and the structure is difficult to be damaged under seismic load. Nevertheless, the saturated subsoil of the four-bucket jacket foundation tends to be liquefied under earthquake, which greatly affects the safety of offshore wind turbine. Therefore, the seismic performance of four-bucket jacket foundation is mainly reflected in the anti-liquefaction capacity of foundation soil. In this paper, the liquefaction resistance of sandy soil of four-bucket jacket foundation for offshore wind turbine is studied. The liquefaction and dynamic response of sandy soil foundation of four-bucket jacket foundation under seismic load are obtained by carrying out the shaking table test, and the influence mechanism of four-bucket jacket foundation on the liquefaction resistance of sandy soil foundation is analyzed.
相似文献15.
Design of an offshore wind turbine requires estimation of loads on its rotor, tower and supporting structure. These loads are obtained by time-domain simulations of the coupled aero-servo-hydro-elastic model of the wind turbine. Accuracy of predicted loads depends on assumptions made in the simulation models employed, both for the turbine and for the input wind and wave conditions. Currently, waves are simulated using a linear irregular wave theory that is not appropriate for nonlinear waves, which are even more pronounced in shallow water depths where wind farms are typically sited. The present study investigates the use of irregular nonlinear (second-order) waves for estimating loads on the support structure (monopile) of an offshore wind turbine. We present the theory for the irregular nonlinear model and incorporate it in the commonly used wind turbine simulation software, FAST, which had been developed by National Renewable Energy Laboratory (NREL), but which had the modeling capability only for irregular linear waves. We use an efficient algorithm for computation of nonlinear wave elevation and kinematics, so that a large number of time-domain simulations, which are required for prediction of long-term loads using statistical extrapolation, can easily be performed. To illustrate the influence of the alternative wave models, we compute loads at the base of the monopile of the NREL 5MW baseline wind turbine model using linear and nonlinear irregular wave models. We show that for a given environmental condition (i.e., the mean wind speed and the significant wave height), extreme loads are larger when computed using the nonlinear wave model. We finally compute long-term loads, which are required for a design load case according to the International Electrotechnical Commission guidelines, using the inverse first-order reliability method. We discuss a convergence criteria that may be used to predict accurate 20-year loads and discuss wind versus wave dominance in the load prediction. We show that 20-year long-term loads can be significantly higher when the nonlinear wave model is used. 相似文献
16.
Experiment Study of Dynamics Response for Wind Turbine System of Floating Foundation 总被引：1，自引：1，他引：0
The floating foundation is designed to support a 1.5 MW wind turbine in 30 m water depth. With consideration of the viscous damping of foundation and heave plates, the amplitude-frequency response characteristics of the foundation are studied. By taking into account the elastic effect of blades and tower, the classic quasi-steady blade-element/momentum (BEM) theory is used to calculate the aerodynamic elastic loads. A coupled dynamic model of the turbine-foundation- mooring lines is established to calculate the motion response of floating foundation under Kaimal wind spectrum and regular wave by using the FAST codes. The model experiment is carried out to test damping characteristics and natural motion behaviors of the wind turbine system. The dynamics response is tested by considering only waves and the joint action of wind and waves. It is shown that the wind turbine system can avoid resonances under the action of wind and waves. In addition, the heave motion of the floating foundation is induced by waves and the surge motion is induced by wind. The action of wind and waves is of significance for pitch. 相似文献
17.
Offshore jacket platform is widely used as production or oil recovering platform in the shallow sea, and is also applied to the offshore wind turbine supporting structure in the recent years. The jacket structures are normally designed to be conservative and bulky according to various design codes. In this work, a structural optimization design method for jacket platform structure has been developed based on topology optimization theory. The topology optimization method is applicable at an early design stage, which can determine the initial structure and force transmission path. The whole design space is chosen as design variables, and the goal is to maximize the structural stiffness. A set of constraints based on multi-criteria design assessment is applied according to standard requirements, which includes stress, deformation, vibration and design variable constraints. The optimization results are compared with the original platform for static performance, dynamic performance and Ultimate Carrying Capacity (UCC). Results show that the optimized structure show a 13.7% reduction in the global mass, 46.31% reduction in the maximum equivalent stress, and large ultimate carrying capacity ability under the same environmental loads. It is demonstrated that the proposed topology optimization method is capable of effectively determining the optimal design of jacket platform structures. 相似文献