共查询到19条相似文献，搜索用时 625 毫秒
1.
以一6.7 MW风机为研究对象，提出了一种适用于30~50 m水深的海上风电倒Y形导管架筒型基础结构型式，采用三维精细有限元模型对结构的受力特性展开研究，包括结构的自振特性以及在随机风浪流荷载作用下的动力响应。研究结果表明，倒Y形导管架筒型基础采用“三腿变六腿”导管架的结构型式，能够更加有效的将上部荷载传递至下部筒型基础，具有较好的受力特性和传力体系；整机结构的前两阶自振频率均在风机允许运行的频率范围内；在50年一遇极端随机风浪流荷载作用下，整机结构的位移响应和应力响应，均可满足结构安全使用要求。 相似文献
2.
3.
叶片桨距角之间的角度差异产生的空气动力失衡是海上风机的主要动力问题之一。基于海上风机分析程序FAST和水动力计算程序WADAM开发的一种时域数值模拟程序,可计算海上风机系统在风浪载荷作用下的耦合动力响应。应用此数值工具,模拟一个叶片上变桨控制系统失效的情况,研究空气动力失衡对浮式海上风机系统运动响应的影响。分析表明,空气动力载荷失衡引起的激振不仅激发了浮式基础的横向运动,而且增大了基础的纵荡运动和首摇运动。同时,空气动力失衡还大幅增加了风机塔柱底部受到的横向剪切力,对风机系统的安全性造成了威胁。 相似文献
4.
根据IEC61400-3设定工况,采用NREL开发的5 MW风机基础模型,应用FAST,以Aero-Hydro-Servo-Elastic耦合仿真技术对风机进行研究。对时域仿真得到的短期载荷,应用分块极大值法联合Gumbel分布外推计算风机极限载荷;以雨流计数法、线性累积损伤理论和S-N曲线为理论基础应用MLife软件,计算风机疲劳载荷。对比分析不同工况下浮式风机、近海单桩风机和陆上风机的极限载荷与疲劳载荷,进而探讨影响浮式风机动态响应的因素。结果表明,对于陆上风机和近海单桩风机,风是其主要载荷来源;而波浪是浮式风机主要载荷来源。对风机进行设计要根据特定海域统计的海洋气候条件,避免风机及其支撑结构的固有频率与波浪频率近似而产生共振;风机制造装配在一定误差范围内,质量不平衡对风机载荷几乎没有影响。 相似文献
5.
以Spar型浮式风机为研究对象,研究涡激力对于浮式风机系统运动的影响。对多体动力学软件FAST进行二次开发,加入涡激力的计算接口,实现了在平台涡激、波激、空气动力载荷及系泊联合作用下的Spar浮式风机系统的运动响应的计算。计算了在风、浪、流联合作用下,频率锁定现象发生时,Spar基础的运动响应,分析了风浪下Spar风机运动响应的涡激运动特性,并研究了不同的入流角度的影响。结果表明:考虑涡激力后,Spar基础的横荡运动明显增大;风浪流同向时,风浪的存在会抑制流载荷引起的横荡在涡泄频率的运动;在流与风浪垂直时,会激发Spar基础的更大的纵荡运动响应。 相似文献
6.
地震是危害海上风电结构作业安全的重要环境因素，目前，国内尚未公开发表真实地震响应下，海上风电结构的实测动力响应数据。分析了某地震活动区海上风电结构的实测地震响应，采用随机子空间识别方法进行风机的模态识别，阐述了风机机舱偏航将引起前后、左右两个正交方向振动的耦合，并从理论上证明了利用耦合、解耦数据识别模态参数的差异。结果表明：1）耦合与解耦信号识别的频率、阻尼比完全相同，而耦合信号识别的模态振型与偏航角有关；2）地震作用会对结构产生巨大冲击；3）非地震作用下，风机塔筒前后、左右第一阶弯曲模态为主要模态，地震作用可以激发风机的高阶模态，使得塔筒中上部而不是顶部的振动响应最大。此分析对地震活动区海上风电结构的抗震设计具有一定的参考价值。 相似文献
7.
对于海上浮式风机而言,由于受到剪切风、塔影效应、浮式基础运动等因素的共同影响,其气动载荷会更加复杂,因此如何准确快速地对海上风力机的气动性能进行预估显得尤为重要。基于速度势的非定常面元法理论,研究海上浮式风机气动载荷特性,编制了相关的计算程序。以NREL 5 MW风机为例,建立了叶片和尾流的三维数值模型,计算得到了不同风速下风机的输出功率以及叶片表面的压力分布,对比数据结果分析了该方法的可靠性。针对非定常流动,模拟了剪切风和塔影效应的作用,并重点分析了浮式基础运动对风机气动载荷的影响。研究表明,浮式基础的纵荡和纵摇会增加输出功率的波动幅值,艏摇运动会导致单个叶片上的气动载荷产生较大的波动,为浮式风机叶片控制提供了参考。 相似文献
8.
针对渤海湾某风电场的海上固定式风机支撑结构,采用适用于大直径单桩结构的PSI曲线模拟桩土相互作用,并采用SACS软件建立支撑结构的动力分析模型。首先对支撑结构进行模态分析;其次考虑海冰结构的随机振动作用模式,根据适用于渤海湾的随机冰力谱构造随机冰载荷时程曲线,基于半耦合的时域方法,采用SACS软件对支撑结构进行冰激振动分析,输出塔筒顶部加速度、单桩基底剪力及倾覆力矩等响应参数的时程曲线和响应功率谱;最后针对冰厚、冰速和海冰强度等海冰参数对支撑结构的冰激振动进行敏感性分析。研究结果表明,在随机振动模式下,冰载荷及结构动力响应对冰厚和海冰强度较为敏感,在进行冰激振动分析时应合理确定冰厚和海冰强度等参数。 相似文献
9.
随着海上风电产业的快速发展,大型浮式风机逐渐从概念设计走向工程应用,但仍面临较大的挑战。一方面,在风、浪等环境载荷的作用下,浮式风机的气动载荷和水动力响应之间存在明显的相互干扰作用;另一方面,风力机大型化使得叶片细、长、薄的特点愈发突出,叶片柔性变形十分显著,这会影响到浮式风机的耦合性能。基于两相流CFD求解器naoe-FOAM-SJTU,结合弹性致动线模型和等效梁理论,建立了浮式风机气动—水动—气弹性耦合响应计算模型,并对规则波和剪切风作用下Spar型浮式风机的气动—水动—气弹性耦合响应进行了数值模拟分析。结果表明,风力机气动载荷使得叶片挥舞变形十分显著,而叶片的扭转变形会明显降低风力机的气动载荷。此外,风力机气动载荷会增大浮式平台的纵荡位移和纵摇角,同时,浮式平台运动响应会导致风力机气动载荷产生大幅度周期性变化。进一步地,叶片结构变形响应会使得浮式风机尾流场的速度损失和湍动能有所降低。 相似文献
10.
介绍海上风机支撑结构的一般失效形式,提出了适合工程实践的设计分析方法,并以某一单立柱三桩的海上风机支撑结构为例,进行了最终强度计算、动力特性分析以及疲劳强度分析。计算结果表明:1)疲劳工况是结构设计的控制工况;2)支撑结构振动频率在风机工作频率1P和3P之间;3)风机工作时的气动阻尼可有效减少支撑结构振动和疲劳损伤。 相似文献
11.
风机基础作为海上风机整体结构的重要组成部分,承受着上部风机所受到的风浪流荷载,并且对风机的安全性及可靠性至关重要。吸力式桶形基础由于其安装简单和可重复利用等优点,在海洋平台基础中得到了广泛应用,并逐步应用于海上风机基础中。但由于海上风机与海洋平台在海洋环境中的荷载工况有一定的差别,仍需要通过对其承载特性研究现状进行全面认识,以实现吸力式桶形基础在海上风机基础中的可靠应用。文中通过总结和评价现有研究对桶形基础在不同土体条件以及荷载条件下进行试验及数值模拟分析得到的研究结果,综述了静荷载和循环荷载作用下砂土和黏土中的吸力式桶形基础的承载特性研究现状,以及海上风机吸力式桶形基础的相关研究。文章展望了目前应用于海上风机基础的桶形基础仍缺乏的研究,为海上风机吸力式桶形基础的可靠应用及后续研究提供重要参考。 相似文献
12.
海上浮式风力机受风、浪、流等外部载荷影响,运营期间经常处于偏航工况,给风力机基础运动响应和锚泊载荷带来重要影响.基于经典叶素动量理论及势流理论,建立海上浮式风力机水—气动力耦合分析模型,对在非定常风、不规则波浪联合作用下,风力机偏航时基础运动响应及锚泊载荷等进行分析.研究发现,额定风速工况下,风力机偏航对平台纵荡和纵摇运动影响较大,偏航30°时纵荡和纵摇平均值比偏航0°时分别下降20.68％和37.36％,垂荡运动响应受风力机偏航影响较小;锚泊载荷变化趋势与平台运动及锚链布置有关,平台纵荡对锚泊载荷影响较大,偏航30°时锚链#1有效张力平均值比偏航0°时下降12.98％. 相似文献
13.
大直径单桩基础是海上风电应用广泛的一种基础形式,严格控制桩基泥面处的位移是保证基础稳定和风机安全运营的关键因素.通过数值方法建立了单桩—海床的三维模型,将可以描述海洋砂土超固结性和结构性的弹塑性本构模型通过UMAT子程序嵌入有限元软件ABAQUS中,桩基承受的波浪荷载通过Morison方程进行计算模拟.针对无波浪荷载、仅作用于海床的波浪荷载、同时作用于桩基和海床的波浪荷载三种情况,分析了海床土的动力响应以及桩基的水平位移之间的差异,探讨了海床土体参数对桩基水平变形的影响.研究结果表明海床土体液化会导致桩基水平变形增加,海床土渗透性、超固结性、结构性对桩基水平位移影响显著,研究成果可为海上风电单桩基础的设计与运维提供参考. 相似文献
14.
Design of an offshore wind turbine requires estimation of loads on its rotor, tower and supporting structure. These loads are obtained by time-domain simulations of the coupled aero-servo-hydro-elastic model of the wind turbine. Accuracy of predicted loads depends on assumptions made in the simulation models employed, both for the turbine and for the input wind and wave conditions. Currently, waves are simulated using a linear irregular wave theory that is not appropriate for nonlinear waves, which are even more pronounced in shallow water depths where wind farms are typically sited. The present study investigates the use of irregular nonlinear (second-order) waves for estimating loads on the support structure (monopile) of an offshore wind turbine. We present the theory for the irregular nonlinear model and incorporate it in the commonly used wind turbine simulation software, FAST, which had been developed by National Renewable Energy Laboratory (NREL), but which had the modeling capability only for irregular linear waves. We use an efficient algorithm for computation of nonlinear wave elevation and kinematics, so that a large number of time-domain simulations, which are required for prediction of long-term loads using statistical extrapolation, can easily be performed. To illustrate the influence of the alternative wave models, we compute loads at the base of the monopile of the NREL 5MW baseline wind turbine model using linear and nonlinear irregular wave models. We show that for a given environmental condition (i.e., the mean wind speed and the significant wave height), extreme loads are larger when computed using the nonlinear wave model. We finally compute long-term loads, which are required for a design load case according to the International Electrotechnical Commission guidelines, using the inverse first-order reliability method. We discuss a convergence criteria that may be used to predict accurate 20-year loads and discuss wind versus wave dominance in the load prediction. We show that 20-year long-term loads can be significantly higher when the nonlinear wave model is used. 相似文献
15.
Offshore wind turbines can exhibit dynamic resonant behavior due to sea states with wave excitation frequencies coinciding with the structural eigenfrequencies. In addition to significant contributions to fatigue actions, dynamic load amplification can govern extreme wind turbine responses. However, current design requirements lack specifications for assessment of resonant loads, particularly during parked or idling conditions where aerodynamic damping contributions are significantly reduced. This study demonstrates a probabilistic approach for assessment of offshore wind turbines under extreme resonant responses during parked situations. Based on in-situ metocean observations on the North Sea, the environmental contour method is used to establish relevant design conditions. A case study on a feasible large monopile design showed that resonant loads can govern the design loads. The presented framework can be applied to assess the reliability of wave-sensitive offshore wind turbine structures for a given site-specific metocean conditions and support structure design. 相似文献
16.
17.
The worldwide demand for renewable energy is increasing rapidly. Wind energy appears as a good solution to copy with the energy shortage situation. In recent years, offshore wind energy has become an attractive option due to the increasing development of the multitudinous offshore wind turbines. Because of the unstable vibration for the barge-type offshore wind turbine in various maritime conditions, an ameliorative method incorporating a tuned mass damper (TMD) in offshore wind turbine platform is proposed to demonstrate the improvement of the structural dynamic performance in this investigation. The Lagrange's equations are applied to establish a limited degree-of-freedom (DOF) mathematical model for the barge-type offshore wind turbine. The objective function is defined as the suppression rate of the standard deviation for the tower top deflection due to the fact that the tower top deflection is essential to the tower bottom fatigue loads, then frequency tuning method and genetic algorithm (GA) are employed respectively to obtain the globally optimum TMD design parameters using this objective function. Numerical simulations based on FAST have been carried out in typical load cases in order to evaluate the effect of the passive control system. The need to prevent the platform mass increasing obviously has become apparent due to the installation of a heavy TMD in the barge-type platform. In this case, partial ballast is substituted for the equal mass of the tuned mass damper, and then the vibration mitigation is simulated in five typical load cases. The results show that the passive control can improve the dynamic responses of the barge-type wind turbine by placing a TMD in the floating platform. Through replacing partial ballast with a uniform mass of the tuned mass damper, a significant reduction of the dynamic response is also observed in simulation results for the barge-type floating structure. 相似文献
18.
As the offshore wind turbine foundation, the four-bucket jacket foundation has a large stiffness and the structure is difficult to be damaged under seismic load. Nevertheless, the saturated subsoil of the four-bucket jacket foundation tends to be liquefied under earthquake, which greatly affects the safety of offshore wind turbine. Therefore, the seismic performance of four-bucket jacket foundation is mainly reflected in the anti-liquefaction capacity of foundation soil. In this paper, the liquefaction resistance of sandy soil of four-bucket jacket foundation for offshore wind turbine is studied. The liquefaction and dynamic response of sandy soil foundation of four-bucket jacket foundation under seismic load are obtained by carrying out the shaking table test, and the influence mechanism of four-bucket jacket foundation on the liquefaction resistance of sandy soil foundation is analyzed.
相似文献19.
Tower, Spar platform and mooring system are designed in the project based on a given 6-MW wind turbine. Under wind-induced only, wave-induced only and combined wind and wave induced loads, dynamic response is analyzed for a 6-MW Spar-type floating offshore wind turbine (FOWT) under operating conditions and parked conditions respectively. Comparison with a platform-fixed system (land-based system) of a 6-MW wind turbine is carried out as well. Results demonstrate that the maximal out-of-plane deflection of the blade of a Spar-type system is 3.1% larger than that of a land-based system; the maximum response value of the nacelle acceleration is 215% larger for all the designed load cases being considered; the ultimate tower base fore-aft bending moment of the Spar-type system is 92% larger than that of the land-based system in all of the Design Load Cases (DLCs) being considered; the fluctuations of the mooring tension is mainly wave-induced, and the safety factor of the mooring tension is adequate for the 6-MW FOWT. The results can provide relevant modifications to the initial design for the Spar-type system, the detailed design and model basin test of the 6-MW Spar-type system. 相似文献