共查询到20条相似文献，搜索用时 31 毫秒
1.
A set of generalized solutions are proposed for estimating ultimate load capacity of pipeline with arbitrary corrosion shapes subjected to combined internal pressure, axial force and bending moment. Isotropic and anisotropic material characteristics in longitudinal and circumferential direction of pipeline are also considered in the proposed equations. Simplified numerical method is used to solve the generalized expressions. The comparisons of numerical results based generalized solutions and full-scale experimental results are carried out. The predicted results agree reasonably well with the experiment results. Meanwhile, the effects of corrosion shapes and locations on the ultimate load capacity are studied. 相似文献
2.
Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods. 相似文献
3.
根据极限平衡和极限分析方法,首先建立了软土地基土体上海底管线的极限承载力计算公式.当地基处于极限状态时,基础作用于地基的全部荷载应等于该地基土体的承载能力,根据这一关系式可以推导出海底管线沉降量的计算公式.最后通过对试验结果的分析,证实所采用的计算方法是可行的. 相似文献
4.
复合加载下桶形基础循环承载性能数值分析 总被引：1，自引：0，他引：1
作为一种新型基础形式,吸力式桶形基础除了承受海洋平台结构及自身重量等竖向荷载的长期作用之外,往往还遭受波浪等所产生的水平荷载及其力矩等其它荷载分量的瞬时或循环作用。对复合加载模式下软土地基中桶形基础及其结构的循环承载性能尚缺乏合理的分析与计算方法。应用Andersen等对重力式平台基础及地基所建议的分析方法,基于软黏土的循环强度概念,在大型通用有限元分析软件ABAQUS平台上,通过二次开发,将软土的循环强度与Mises屈服准则结合,针对吸力式桶形基础,基于拟静力分析建立了复合加载模式下循环承载性能的计算模型,并与复合加载作用下极限承载性能进行了对比。由此表明,与极限承载力相比,桶形基础的循环承载力显著降低。 相似文献
5.
Suction buckets are a promising foundation solution for offshore wind energy systems. The bearing behavior of monopod buckets under drained monotonic loading in very dense and medium dense sand is investigated in this study by means of numerical simulation with the finite element method. Special focus is given to the ultimate capacity and the initial stiffness of the bucket-soil foundation system. The numerical model is validated by comparison with field test results. The bearing behavior of the structure is explained through an evaluation of a reference system. It is shown that the bucket experiences a heave during horizontal loading, which leads to the formation of a gap between the bucket lid and the soil with increasing load. At large loads and rotations close to failure of the system there is no contact between lid and soil, and the whole load is transferred to the soil via the bucket skirt. A parametric study shows how the ultimate capacity and initial stiffness of the system depend on the bucket dimensions and loading conditions, i.e. load eccentricity. Normalized equations for ultimate capacity and initial stiffness are derived from the numerical simulation results, which can be used in the scope of a preliminary design for buckets in sand. 相似文献
6.
腐蚀是管道常见的缺陷形式之一,会极大降低管道的压溃压力,同时深海环境下高静水外压易引发管道压溃失效,威胁管道的安全运行,因此准确预测管道压溃压力显得尤为重要。采用数值模拟方法研究了含腐蚀缺陷的高强钢厚壁管道压溃失效模式,分析了管材、管道径厚比、腐蚀深度、长度和宽度等参数对高强钢厚壁管道压溃压力的影响规律。分析结果表明:管道径厚比愈大,对厚壁管道的承压能力提升愈显著;腐蚀缺陷的存在对管道压溃压力具有减小作用;随着管道材料等级的提升,压溃压力有明显提高。提出了相应的压溃压力预测公式,为厚壁管道完整性评价提供了参考依据。 相似文献
7.
利用室内半模试验和颗粒流数值模拟,揭示多层砂土地基扩底桩单桩抗压承载特性及变形特征。结果表明,通过对比分析极限承载力与H_h/D(持力层厚度与扩大头直径之比)的关系可以看出,单桩的抗压极限承载力随H_h/D逐渐增加,当H_h/D超过2.0时,极限承载力基本不再增加,此时的单桩抗压极限承载力稳定在300.01~303.25 N,是H_h/D=0.5时极限承载力(183.83 N)的1.65倍。扩大头下部土体发生局部压缩-剪切破坏,破坏面从扩大头底面边缘向斜下方扩展,在水平方向影响范围达到最大后逐渐向桩内侧收缩;荷载作用越大,地基破坏区域越大,相应的极限抗压承载力也越大;持力层厚度增加,扩大头分担的荷载比例增大,分担的荷载达到稳定需要的桩顶位移也越大,H_h=0.5 D试验扩大头分担的荷载比例稳定时为60%,对应的桩顶位移约为29 mm;桩顶位移达到33 mm后,H_h=1.0~3.0 D试验稳定在63%~65%之间;通过细观颗粒流理论对砂土移动特性的研究发现,持力层厚度从0.5 D增大至2.0 D,破坏面的起始扩展角度从31°增大至42°。数值模拟研究结果与模型试验数据吻合效果良好,证明该方法分析多层砂土地基扩底桩单桩抗压荷载传递机理是可行的。 相似文献
8.
提出一种随机分布点蚀损伤的模拟方法,模拟点蚀在构件表面的随机生长过程,并建立了随机态点蚀损伤圆管截面的有限元分析模型;设计了三个受不同腐蚀深度点蚀损伤的圆管构件,并开展轴压试验,利用试验结果校验有限元模型的计算精度;在多种腐蚀情形下(点蚀强度和腐蚀深度变化),研究点蚀分布模式变化引起的极限强度退化及其变异性;比较随机分布点蚀模型与传统腐蚀模型(规则分布点蚀和均匀腐蚀)在计算强度和结构失效行为方面的差异。研究结果表明,点蚀的随机分布模式会引起显著的极限强度变异,且蚀坑深度越大,强度变异越大,蚀坑分布造成的强度极差与强度均值相比达到5%;随机分布点蚀相比于传统腐蚀模型,除了引起更为严重的强度削减,还会改变结构的破坏模式。提出的随机点蚀损伤的模拟方法,可替代昂贵的构件试验,应用于评估点蚀损伤圆管截面的极限强度,增强评估结果的可靠性。 相似文献
9.
One of the main concerns for pipeline on-bottom stability design is to properly predict ultimate soil resistance in severe ocean environments.A plane-strain finite element model is proposed to investigate the ultimate soil resistance to the partially-embedded pipeline under the action of ocean currents.Two typical end-constraints of the submarine pipelines are examined,i.e.freely-laid pipes and anti-rolling pipes.The proposed numerical model is verified with the existing mechanical-actuator experiments.The magnitude of lateral-soil-resistance coefficient for the examined anti-rolling pipes is much larger than that for the freely-laid pipes,indicating that the end-constraint condition significantly affects the lateral stability of the untrenched pipeline under ocean currents.The parametric study indicates that,the variation of lateral-soil-resistance coefficient with the dimensionless submerged weight of pipe is affected greatly by the angle of internal friction of soil,the pipe-soil friction coefficient,etc. 相似文献
10.
防沉板基础是水下井口、管汇节点与管汇终端等的永久支撑结构,其承受的荷载具有明显的复杂性、非线性和不确定性,给防沉板基础的稳定性研究带来了巨大挑战。本文研究了在剪切强度随深度线性增长的不排水饱和软黏土中,相同用钢量条件下矩形、方形、六边形和圆形防沉板基础的承载特性。采用数值模拟方法确定了竖向荷载V、水平向荷载H(Hx、Hy)、弯矩荷载M(Mx、My)和扭矩荷载T联合作用下,防沉板基础在V-H、V-M、V-T、Hx-Hy、Mx-My、T-H和T-M荷载空间的地基承载力包络线,并建立了相应的拟合公式。研究表明,不同的基础形状对其承载力影响显著,当V较大时,适宜选用圆形基础;当H较为显著时,应选用矩形或方形基础;圆形、方形和矩形基础的抗弯特性分别适用于不同条件下M为主控荷载的情况;当T的影响不可忽视时,矩形或方形基础为首选形式,六边形和圆形基础次之。 相似文献
11.
Spar平台吸力式基础极限承载特性数值分析 总被引：2，自引：0，他引：2
以国外某深海Spar平台工程为背景,针对其所采用的细长型吸力式基础的抗拔承载特性进行三维有限元数值分析.分析中充分考虑土体强度、加载位置和加载角度对吸力式基础极限抗拔承载力的影响,本构模型中钢筒基础采用弹塑性模型.分析结果表明,吸力式基础的极限抗拨承载力随着土体强度的增大而增大,倾斜加载时在基础插入土体部分中点左右加载可取得最大的极限承载力,极限抗拔承载力还随着加载角度的增大而增大.吸力式基础存在倾斜加载时桶基础与桶内外土体的共同塑性屈服破坏和垂直加载时桶外土体的局部剪切破坏等两种不同的破坏模式. 相似文献
12.
Buckle propagation in pipelines with non-uniform thickness 总被引：1，自引：0，他引：1
Finite element solutions for the steady-state buckle propagation pressure in a pipeline with non-uniform thickness are given. The results are useful in finding buckle propagation pressures in corroded pipelines. It has been found that when corrosion is equal to or less than 10% of the original pipeline thickness, the pipeline collapses in an overall shell buckling mode; otherwise, the pipeline experiences local buckling. The propagation pressure decreases with both the thickness and angular extent of the reduced section, but the rate of decrease with thickness reduction is almost independent of the angular extent of corrosion when it is greater than 90°. 相似文献
13.
1 .Introduction Submarine pipelines are one of the safest and the least environmentally disruptive means for ma-rine gas or oil transport . With the development of exploitation of submarine oil or gas ,the safety ofsubmarine pipelines has becomethe major … 相似文献
14.
点蚀损伤下桩基式平台腿柱轴压极限承载力研究 总被引：2，自引：0，他引：2
采用圆柱体点蚀损伤模型,建立含细观尺度点蚀损伤的桩基式平台腿柱多尺度精细化数值模型,研究壁厚损伤度、点蚀损伤强度以及点蚀体积损伤强度影响平台腿柱轴压极限承载力的规律。研究结果表明,壁厚损伤度及点蚀损伤强度明显削弱平台腿柱的极限强度,且随点蚀损伤强度增大壁厚损伤度的影响加剧;点蚀体积损伤强度由于综合考虑了壁厚损伤度和点蚀损伤强度的耦合因素,相比于独立考虑后两者,其更能合理地描述点蚀损伤对平台腿柱极限强度的影响,故点蚀体积损伤强度体现了点蚀损伤的关键特征。本方法不仅适用于研究点蚀损伤构件的极限承载力,其所提出的点蚀损伤模型的构建方法,可拓展于研究受点蚀损伤的整体平台结构的极限承载力,且确定点蚀体积损伤强度为描述点蚀损伤特征的关键参数后,有望将其用于修正点蚀损伤平台腿柱的承载力设计公式。 相似文献
15.
In this study, the CPSO-SVM models, which combine chaotic system, particle swarm optimization (PSO) and support vector machine (SVM), are presented and applied to predict the ultimate bearing capacity of shallow foundations. Chaotic mapping enjoys certainty, ergodicity and the stochastic property. Chaotic PSO (CPSO) increases the convergence rate of PSO and precision of the results through introducing chaos mapping into the particle swarm optimization algorithm. Since the selection of parameters for SVM is crucial to its performance of prediction, the CPSO is adopted to search for the optimal parameters. The proposed methods are used to predict the ultimate bearing capacity of shallow foundations based on data of load tests. Results indicate that the proposed methods can appropriately describe the relationship between ultimate bearing capacity and its affective factors, and make good predictions. 相似文献
16.
Hiroyoshi Hirai 《Marine Georesources & Geotechnology》2018,36(4):425-437
A study was made to present analytical solutions of pullout load capacity for a suction caisson subjected to inclined tension in clay. The inclined tension on the skirt of the suction caisson is transformed into an equivalent system comprised of the vertical, horizontal, and moment load applied on the center of the lid. The vertical and horizontal stiffness coefficients along the skirt of the suction caisson in clay are presented by three-dimensional elastic solutions considering the nonhomogeneous and nonlinear property of clay. The vertical, horizontal, and rocking stiffness coefficient of the suction caisson on the base are presented considering the solutions of a hollow rigid cylindrical punch acting on the surface of clay. The envelopes of the horizontal and vertical ultimate load capacity for clay are presented. The yield, pullout, and failure for clay are taken into consideration. The effects of load inclination, loading depth, and aspect ratio on the pullout load capacity are shown. Behavior of the suction caisson in clay up to failure is investigated using the relationship between tensile load and displacement and that between depth, vertical, and horizontal pressure. 相似文献
17.
土层抗浮锚杆承载力关键影响因素现场试验研究 总被引：3，自引：1，他引：2
工程实践及理论研究均表明,锚土界面特性和锚杆的几何形状是影响抗浮锚杆承载力的2个关键因素。采用不同的施工工艺进行现场试验施工,得到了具有不同锚土界面特性和锚杆几何形状的抗浮锚杆。通过现场锚杆抗拔试验得到锚杆的应力应变关系及极限抗拔承载力。研究结果表明,改善锚土界面特性和采用变截面的锚固体可显著提高锚杆的抗拔承载力。同时,提出了1种经济高效的抗浮锚杆施工工法。 相似文献
18.
Jack-up platforms of the Ocean engineering structures always withstand the vertical gravity loads which are applied to the seabed by spudcan, so it is important to determine the bearing capacity and the penetration depth of the spudcan for its geometry. In fact, it is up to the deformation law and the failure modes of soil surrounding the spudcan which can calculate the ultimate bearing capacity of the spudcan foundation on the soil seabed. By using the finite element analysis software Abaqus, the deformation law of soil around the spudcan is analyzed in detail, and the failure modes of soil surrounding the spudcan foundation are achieved. At the same time, based on the limit equilibrium theory, by use of static permissible slip-line field, the ultimate bearing capacity of the spudcan foundation is analyzed and the lower limit solution is derived theoretically, and the effect of the spudcan angle on the ultimate bearing capacity is investigated. The numerical results are compared with those obtained by the theoretical formulas deduced in this paper. On the basis of the lower limit solutions in this paper, the effect of the spudcan angle on the ultimate bearing capacity is revealed, and a practical bearing capacity formula is given to take the effect of the spudcan angle into consideration. 相似文献
19.
玻纤增强柔性管作为一种新型海底油气输送管道,具有比强度高、柔度大和抗腐蚀性强等特点,因此在深海油气开发中具有非常广阔的应用前景。玻纤增强柔性管主要由内衬层、增强层和外保护层组成,其中增强层的等效模拟是玻纤增强柔性管设计成功与否的关键。根据玻纤增强柔性管的结构特征和材料特性,选取了四种不同的等效简化模型,对比研究了玻纤增强柔性管在轴向拉压荷载、弯曲荷载以及内压荷载作用下的力学性能。将不同简化模型的计算结果与相应的试验数据进行对比,进行等效模型的优选。研究结果表明,在内压载荷和弯曲载荷作用下,基于Halpin-Tsai模型数值结果与试验结果最为接近。在轴向载荷作用下,采用分离式模型或回形模型计算精度更高,若材料达到屈服状态时,则建议采用分离式模型进行模拟。 相似文献
20.
Monopod caisson foundation is a viable alternative for supporting offshore wind turbines located at shallow water depths. This foundation system has to resist overturning moment generated due to resultant lateral load, arising from wind and water wave action, that can act at any loading height above the seabed. This paper presents results of a numerical investigation performed to determine the influence of loading height, caisson geometry and superstructure load on the ultimate lateral capacity, initial stiffness, and soil failure zone of the foundation, when installed in very dense sand. Both the ultimate and serviceable states of the caisson foundation obtained from the analyses are represented in terms of envelopes plotted between lateral load and overturning moment. Simplified expressions, which take into account the influence of caisson geometry, loading height, and soil properties, are also presented to serve as a preliminary base for design of the monopod caisson foundation. 相似文献