共查询到20条相似文献，搜索用时 78 毫秒
1.
深海钢悬链立管触地点动力响应分析 总被引：1，自引：0，他引：1
研究深海钢悬链立管(SCR)在海洋环境载荷作用下的动力响应.利用非线性弹簧模拟立管与海床触地点的耦合模型,通过模态分析得到钢悬链立管的动力特性参数;时域动力响应分析获得不同工况下触地点及典型部位的位移、弯矩和应力时程.比较分析表明:浮体垂荡运动对触地点的应力状态影响较大,触地点附近存在钢悬链立管动力响应过程中的位移极值点和弯矩极值点.所提方法为触地点区域模拟分析提供了新思路,给出的分析结论对钢悬链立管设计有一定借鉴意义. 相似文献
2.
非线性海床土深水缓波型立管动力响应分析 总被引：1，自引：1，他引：0
缓波立管的结构形式能够有效改善立管触地区的动力响应,达到保护立管触地区的目的。基于集中质量法和考虑土体弱化的非线性海床土模型,用等效浮力的方法将缓波立管浮力段简化,并在Orca Flex中建立传统钢悬链线立管和缓波立管的集中质量模型进行分析,考虑立管结构形式、浮力段长度和浮力段起始位置的影响,得到立管静态位形、触地点张力和弯矩、立管贯入深度以及触地点海床阻力等结果进行比较。结果表明:浮力段的配置会提高立管静态弯矩分布水平,但合理的缓波立管设计能有效改善立管触地区的动力响应,抑制海底沟槽的发展,达到保护立管触地区的目的。 相似文献
3.
与海床的相互作用是钢悬链线立管特有的性质,是传统立管发展中不曾遇到的问题,也是控制立管疲劳寿命的主要因素,特别是触地区出现的峰值弯曲应力和管土接触模型的不确定,成为SCR触地区研究的难点。由于立管与海床的作用机理非常复杂,因此管土相互作用模型的提出大多是建立在模型试验的基础上。通过对国内外深水SCR触地区管土相互作用试验研究案例的分析,简要介绍了SCR触地点的动态响应取决于一系列参数,如海床土刚度、加载状况、立管的提升速度、土的重塑时间和土吸力等,并设计了一套三维管-土相互作用的试验装置,能够为深水钢悬链线立管触地区管-土相互作用的试验研究提供参考。 相似文献
4.
平台运动激励下钢悬链式立管触地点动态分析 总被引：1，自引：1，他引：0
平台运动和管土相互作用是引起钢悬链式立管(Steel Catenary Riser,SCR)触地点动态响应和疲劳损伤的关键因素。基于竖向土抗力-埋深曲线和侧向库伦摩擦双线模型模拟SCR触地区管土作用,并考虑竖向海床刚度的退化,研究平台三维运动激励下SCR触地区的动态响应与疲劳寿命,相对于简单的单向运动激励和仅考虑竖向管土作用,更符合工程实际。计算结果表明:①三维管土作用下,平台垂荡运动对立管触地区的影响最大,纵荡运动次之,横荡的影响最小;②平台三维运动的耦合,在一定程度上可降低立管触地区的动力响应和疲劳损伤,若仅考虑垂荡运动,结果偏于保守;③非线性海床模型相对于线弹性海床,引起的立管触地区的应力幅值、位移幅值显著增加,虽然贯入位移较小,但土抗力较大,选用线弹性海床的计算误差较大。平台运动和海床强度对SCR触地点动态响应和疲劳损伤的影响较大,因此在SCR响应分析与设计中,准确选择海床模型和平台运动方式,对于预测立管的疲劳寿命具有重要意义。 相似文献
5.
考虑钢悬链线立管大变形的特性以及内流的影响,利用Kane方法和拉格朗日应变理论建立钢悬链线立管的二维动力学模型。将顶部浮体的激励简化为一个沿顺流向的周期作用力施加于立管顶部,采用平均加速度法求解立管的动力响应。探讨顶部浮体不同激励频率下立管的非线性动力响应以及内流流速的大小对管道共振响应幅值的影响。 相似文献
6.
《中国海洋大学学报(自然科学版)》2010,(Z1)
由于钢悬链线立管具有非线性特性,而海床土体又是软黏土,因此钢悬链线立管触地区域的管土的相互作用十分复杂。根据国外相关试验数据,采用ANSYS中的非线性弹簧单元模拟海床土体,考虑海床土体刚度退化和土吸力对管道的作用,建立海底管道拟静力有限元计算模型,计算分析管道与海床土体的相互作用,并探讨管道触地点区域关键点在顶端升沉运动下弯矩的变化规律,为进一步研究SCR与海床的动力相互作用提供参考。 相似文献
7.
钢悬链线立管(SCR)在上部浮体运动和波流荷载激励下会与海床土相互作用,传统的线性海床模型假定荷载位移关系是线性的,没有考虑管土相互作用的非线性过程和海床土吸力的影响,本文基于大挠度柔性索理论的钢悬链式立管动力分析程序CABLE3D,将立管受到线性海床的弹性支撑力扩充为立管受到的海床垂向力,充分考虑管土非线性相互作用,并考虑海床土吸力对钢悬链式立管触地点区域的影响,开发出新的动力分析程序。程序采用非线性有限元方法对控制方程进行离散,时域内采用Newmark-β法,求解给定上部浮体运动条件下,SCR的动力响应,通过算例对线性刚度海床和非线性刚度海床进行对比,并分析了不同海床刚度对SCR触地点动力响应和疲劳损伤的影响。结果表明:非线性海床刚度模型比线性海床刚度模型更接近真实的管土作用过程;在非线性海床刚度模型下,海床土刚度越大,SCR触地点区域垂向位移响应越小,应力幅值越大,疲劳损伤越严重。 相似文献
8.
触地段(Touchdown zone, TDZ)是在役钢悬链线立管(Steel catenary riser, SCR)的关键部位,在复杂载荷作用下,极易形成损伤缺陷,其载荷寿命的评估是深海结构工程中的一个关键问题。本文以大型有限元软件ABAQUS为平台,运用损伤管道实体单元与土弹簧阻尼单元相互作用的模型模拟触地段损伤海底管道在复杂载荷作用下的动力响应,数值计算考虑了管-土相互作用过程中的材料非线性、几何非线性以及接触非线性。讨论了单一环向体积损伤位于触地段管道的不同位置时,触地段损伤管道在不同载荷作用下的动力特性及特征点的动力响应。结果表明,管道所受内外压力以及管道提升端的竖向位移载荷会影响结构的自振频率;体积损伤部位的动力响应较完好部位更剧烈;体积损伤的位置和动力载荷频率对管道动力放大系数的影响很大;当动力载荷的激励频率越接近结构基频时,损伤管道的动力响应及动力放大系数越大。 相似文献
9.
基于钢悬链式立管(SCR)动力分析程序CABLE3D,采用大挠度柔性梁理论建立SCR的运动方程,将线性海床模型扩展为考虑海床土吸力的非线性海床模型,采用非线性有限元方法对控制方程进行离散,时域内积分采用Newmark-β法,开发出新的计算程序。通过算例分析上部浮体垂荡运动幅值、海床土剪切强度、海床土剪切强度梯度对SCR触地点区域动力响应和疲劳损伤的影响。分析结果表明:SCR触地点区域动力响应和疲劳损伤对上部浮体垂荡运动幅值和海床土剪切强度的变化较为敏感,疲劳损伤在触地点区域最大,远大于悬垂段和流线段,在设计过程中应采取一定的加强措施。 相似文献
10.
研究海床土吸力对深海钢悬链线立管(SCR)与Spar平台整体波浪响应的影响。分别采用大挠度曲线梁模型、弹性地基梁模型模拟SCR的悬垂段和流线段,考虑SCR与Spar的动力耦合效应,提出整体分析法,并基于锚链/SCR分析程序Ca-ble3D开发V-Cable3D。考虑海床土吸力影响,时域动力响应分析获得一海况下SCR顶点和触地点的位移、张力、弯矩和应力时程。比较分析表明:SCR顶点和触地点附近分别存在波浪响应过程中的张力最大值和弯矩最大值,吸力对这两个特征量以及立管应力状态影响较大。提出的整体分析法为SCR波浪响应分析方法提供了新思路,对SCR与海床的相互作用分析有一定的参考意义。 相似文献
11.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
12.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
13.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
14.
15.
《海洋学报(英文版)》2014,(9):F0003-F0003
<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology, 相似文献
16.
The relationship between the flux of exotic benthic foraminiferal tests (i.e. tests which are supplied from open-sea sources alone) in a tidal inlet and that of bulk sediment was analysed, which can be expressed as two first-order linear equations. According to this relationship, in order to determine net sediment transport directions in the entrance, the test concentration in surficial sediments of the tidal basin can be compared against a ‘ critical level ’. The critical level is determined for the conditions that no net transport of bulk sediment is present within the entrance. If the observed concentration (averaged over the tidal basin) is higher than the simulated critical level, then the net sediment transport is directed to landward. This method is applied to the analysis of net sand transport at Christchurch Harbour, a tidal inlet system located in southern England. In this investigation, concentrations of exotic foraminiferal tests in the surficial sediments of the tidal basin and ebb tidal delta area were obtained from the analysis of sea-bed sediment samples. A series of probable critical levels were calculated based upon the data sets with regard to: (1) sediment discharge from the rivers; (2) magnitude of sediment discharge within the entrance during the ebb; (3) the test concentration outside the harbour; (4) the thickness of the moving layer; and (5) two parameters associated with dispersive processes. The results show that the concentration in the tidal basin sediment is higher than a number of simulated critical concentrations for representative cases. Consequently, the high level of the concentration of exotic benthic foraminiferal tests within the harbour should be explained as a result of landward net transport of sands within the entrance. 相似文献
17.
18.
Rahul Sharma 《Marine Georesources & Geotechnology》2000,18(3):237-250
Observations on seafloor features from subbottom profiling and seabed photography data show that the undisturbed and natural conditions before the benthic disturbance undergo a substantial change after operation of the disturber. The effects can be seen in the form of deep trenches and grooves, formed by the action of the sleds and the pumping of the sediment along its path, as well as sediment piles on either side of the track. Biological traces such as fecal coils, casts, tubes, burrows, and trails get obliterated in the areas of disturbance and resedimentation. The smooth, uniform nature of the seafloor observed in predisturbance phase shows microtopographic changes in and around the disturbed area as a result of sediment excavation and resettlement. Vertical mixing as well as lateral transport of sediment alter the geological, biological, physical, and chemical conditions on the seafloor, which need to be monitored over time to assess the process and the time taken for restoration of environmental conditions. 相似文献
19.
Vance P. Vicente 《Marine Ecology》1989,10(2):179-191
Abstract. Long-term changes in the distributional patterns of commercial sponges ( Spongia spp. and Hippospongia spp.) within the West Indian Region indicates that: 1) commercial sponges had a widespread distribution throughout the whole West Indian Region and were ubiquitous in very shallow water until about the first half of the present century; 2) they were fished commercially not only in the traditional northern Caribbean sites (Florida, Gulf of Mexico, Bahamas) but also in the Greater ( e. g. , Hispaniola, Jamaica) and Lesser Antilles; and 3) they became extinct throughout most of the Lesser Antilles ( e. g. , Puerto Rico, Vieques, St. Thomas) sometime during the first half of this century. Mortalities of spongiids within the Antilles were found to differ from other marine mortalities in that: 1) species disappeared from a large region; 2) species vanished from different habitats and depths; and 3) natural populations never recovered. Species richness patterns suggest that commercial sponge genera ( Spongia and Hippospongia ) evolved under slightly cooler elimatic conditions than those found at present, and that these extinctions occurred as a direct or indirect effect of positive thermal anomalies in sea surface and atmospheric temperatures between 1900–1950. The concept that species diversity is stable on a regional scale is questioned. 相似文献
20.
The behaviour of an axially pre-loaded cylindrical member of an offshore structure, hit by a supply ship, has been investigated. The effects of axial pre-loading on the dynamic properties of members, the extent of damage and propagation of dynamic instability in the tubular members have also been investigated. Numerical models have been validated using available experimental data from the literature although these are mostly static with no pre-loading. Axial pre-loading was found to change the dynamic characteristics of some cylindrical members quite dramatically while it had no significant effect on others. The study examined whether there was any change in the behaviour between local and global modes when the loading was dynamic rather than static. The effect of damping on the dynamic instability of axially pre-loaded tubes under lateral dynamic loads was also studied. It was observed that for some geometries the quasi-static response can be used to define the boundary between bounded and unbounded dynamic responses. The main contribution of this study, compared with previous investigations reported in the literature, is that both pre-loading and dynamic effects have been included. 相似文献