共查询到20条相似文献，搜索用时 328 毫秒
1.
张翔龙 《数字海洋与水下攻防》2019,2(5):63-67
20世纪90年代以来，超声相控阵技术已广泛应用于航空航天、电力、船舶、石化等行业，显示出其在检测探测方面的优势。以超声相控阵技术在某型产品壳体复杂结构焊缝检测中的应用为例，介绍了目前该技术在焊缝检测应用中的发展及优势，针对目前该技术发展和推广中存在的问题，结合产品质量控制的要求给出了合理化建议。 相似文献
2.
针对传统无损检测方法对自升式海洋平台检测工作量大、费时费力等问题,提出了一种金属磁记忆(MMM)与交流电磁场(ACFM)联合检测的新方法。在简介MMM和ACFM检测机理之后,将其应用到自升式海洋平台关键部位的无损检测中。分别以齿条座板与桩腿之间的T型焊缝和桩腿环焊缝为例,首先通过MMM快速全面扫描待检测表面,基于磁场分布及梯度值确定应力集中部位;在此基础上,利用ACFM方法重点对应力集中部位进行裂纹缺陷的定量化检测,结果表明MMM对应力集中或微观缺陷非常敏感,而ACFM方法可精确给出裂纹缺陷的深度信息,为平台结构的安全可靠运行和维修方案制定提供了方法参考和理论依据。 相似文献
3.
4.
海洋平台优化设计的研究进展 总被引：4，自引：0，他引：4
结构优化是结构设计理论的重要发展,随着“十五”渤海大油田勘探开发战略的实施,结构优化技术将在新型抗冰振平台设计中发挥重要作用。从静力优化设计、动力优化设计、基于可靠度优化设计、全寿命优化设计四个方面论述了海洋平台结构优化设计的研究现状,并展望了海洋平台优化设计的研究前景。 相似文献
5.
当前,海洋的价值越来越被人类重视,海洋开发活动对于国家发展日益重要,其中海底地形测量在海洋开发中有着举足轻重的地位.相较于应用多波束测深系统或侧扫声呐系统测量海底地形的传统方式,三维侧扫声呐将多波束测深系统与传统侧扫声呐系统的特点融为一体应用于海洋测绘生产,极大地提高了作业效率,减小了作业成本.本文以3DSS-iDX-450三维侧扫声呐为例,介绍了其系统组成及功能参数,通过多项性能测试及在外业生产中的测量效果分析比较了三维侧扫声呐技术在海底地形测量中的性能参数及优势特点,根据生产中的经验提出了使用建议,并对未来三维侧扫声呐的应用进行了分析及展望. 相似文献
6.
7.
随时间变化的海洋平台结构系统可靠性分析 总被引：1，自引：0，他引：1
海洋平台在服役期间由于受到各种损伤,其系统可靠性将随时间而变化。本文分析了几种典型损伤——疲劳损伤、腐蚀损伤对海洋平台结构系统可靠性的影响,在考虑其对结构构件强度和承受载荷的影响情况下分析随时间而变化的海洋平台结构的系统可靠性。首先得到考虑时间因素的结构构件的强度和载荷函数,采用分枝界限法寻找结构的主要失效路径,最后以Ｄｉｔｌｅｖｓｅｎ界限法求取结构的系统失效概率。算例说明,在考虑时间因素的条件下,结构的系统可靠性将会迅速下降。按以上思路编制了空间刚架在构件强度随时间变化条件下的通用可靠性分析程序,算例表明程序是合理有效的。 相似文献
8.
基于模糊影响图(FPID)和失效模式与效果分析(FMEA)建立了一种海洋结构风险分析方法。鉴于风险分析中某些事件发生概率和关系概率两个重要参数确定时需借助专家主观判断,本文将模糊概率的概念引入海洋结构影响图评估方法中。该方法成功地应用到海洋平台人员伤害分析中。虽然这里仅给出了该方法在海洋平台风险评估中的应用,但其具有更广泛应用价值。 相似文献
9.
10.
海洋移动自主观测平台在海洋观测技术中越来越为人们所倚重,发达国家相继投入了大量的研究和部署.研究一种具有全天候、长续航力的海洋移动自主观测平台是当前一系列海洋装备中的研究热点和未来趋势,尤其是最近5年,这项工作更是达到了新的高度.针对长续航力海洋移动自主观测平台的特征,文中将其分为长续航力自主潜航器系列和水下滑翔机系列两大类,结合其共性问题分析了世界各国的研究现状,并对其未来发展趋势作了展望,最后简要讨论了这些平台未来发展中的关键技术. 相似文献
11.
R. Frank Busby 《Ocean Engineering》1979,6(4):355-491
The extraction of offshore oil and gas deposits has resulted in installation of massive steel and concrete platforms in progressively deeper and more hostile waters. Concern for the safety of platform personnel, potential damage to the environment, and the assurance of profitable, unimpeded, extraction of these offshore resources is a concern of host-country governments and the offshore operators.Requirements for underwater inspection of these structures and the techniques and tools to conduct such inspection vary widely from country-to-country. In some instances periodic inspection is required by law; in other instances there is no requirement whatever once the structure has been installed. The instruments to conduct underwater inspections also vary; their effectiveness is sometimes questionable, and the cost of underwater inspection to the operator (which will eventually be borne by the consumer) is high and will get higher as the water depth and complexity of the structure increases.The purpose of this six month study was: 1) to identify and describe all actual or potential underwater inspection requirements (national and international) for fixed concrete and steel structures promulgated by the governments of offshore oil and gas producing countries and by the offshore operators themselves; 2) to identify and assess the state-of-the-art in underwater non-destructive testing/monitoring/inspection of offshore structures; 3) to evaluate the capability of servicing and hardware producers to meet the inspection requirements identified; and 4) to describe and establish priorities for specific tasks for technology development that should be undertaken to satisfy current and future requirements. While this study concentrates on fixed offshore oil and gas structures, the results also reflect the state-of-the-art in underwater inspection/testing for other offshore structures as well, e.g., floating power platforms; offshore terminals and deepwater ports.The data for this study were collected in three stages. First, an intensive literature review was conducted to initially identify those organizations and governments active in projects related to the study goals (the results of this literature survey are presented in Appendix I). Second, telephone interviews were conducted to further identify “Requirements” sources and suppliers/manufacturers of inspection/testing capabilities in the U.S. and Europe. Third, personal interviews were conducted with individuals active in hardware production or inspection services. Personnel and organizations contacted (both by telephone and on a personal basis) are identified in Appendix II (Requirements) and III (Capabilities), respectively. Approximately four months were required to satisfy the data collection phase; the remaining two months were spent analyzing, reducing and synthesizing the data obtained. 相似文献
12.
- To characterize the uncertainty and fuzziness in offshore structural inspection, probability of detection (POD) must be determined. This paper presents the expressions for the POD of four different damage forms mainly existing in offshore structures. The fuzzy-set theory is applied to estimate human errors through the definition of inspection quality. Expressions of inspection quality are achieved. To verify the validity and correctness of the expressions, the data from an offshore platform field inspection of evaluation results of human errors affecting inspection quality are used to estimate the parameters of the POD. The results show that the present models can provide basis for further study of ofTshore structural inspection reliability. 相似文献
13.
14.
导管架式海洋平台结构极限承载力分析的整体推进法及其软件 总被引：9，自引：1，他引：8
根据非线性有限元逐步分析的思想,以已有的结构弹性分析软件为计算核心,提出了一种近似分析结构极限承载力的方法——整体推进法;采用整体推进法,以导管架式海洋平台结构线弹性分析软件ＥＮＳＡ为计算核心,考虑结构构件的损伤影响和维修加固效果,编制了导管架式海洋平台结构极限承载力近似分析软件ＵＡＰ,为导管架式海洋平台结构的安全度评定提供了方法和手段;最后对渤海八号生产／储油平台在１９９３年的状态和ＪＺ２０２ＭＵＱ平台的完好状态进行了极限承载力分析 相似文献
15.
16.
In this study, the seismic response control of offshore platform structures with Shape Memory Alloy (SMA) dampers is investigated. A new SMA damper and its restoring force medel are introduced for the calculation of seismic response reduction. Based on an actual platform structure and its mechanical medel, the parameters which may affect the rate of shock absorption are analyzed, such as the number, position and characteristics of the SMA dampers and the condition of the site where the platform is located. The results show that the SMA damper is an effective control device for offshore platforms and satisfactory control can be achieved by proper selection of the parameters. 相似文献
17.
随着海洋石油天然气资源的不断开发,海洋结构物得到了广泛的应用。长时间持续工作于海洋环境以及一旦失效代价高昂的特点使得海洋结构物的安全问题倍加瞩目。基于风险的检测和维护将海洋结构物的风险与费用相结合,可以在满足安全要求的前提下合理地降低运营费用,是目前国际上研究领域的热点问题。通过分析基于风险的海洋结构物检测和维护的国内外研究现状,对检测及维护操作过程中的一些关键问题和目前主流的研究方法及应用情况做了概述。最后讨论了海洋结构物检测维护研究中存在的一些问题,提出了今后的研究方向。基于风险的检测和维护将是今后一个值得关注的重要课题。 相似文献
18.
海洋空间资源开发中,海上观光旅游平台具有较广的应用前景。浮式观光平台可设计为圆环形结构,环形内部区域可以为游艇停泊和亲水场所提供掩护。此类结构与船舶月池结构类似,有内域半封闭水体,也存在水体共振问题。为分析此类结构水体共振响应,评估内域水体掩护条件,对以圆环形为基础增加弦与所截圆弧围成区域平台模型(观光平台)的内域水体共振模态进行模拟。观光平台共有6个特征模态,分布在0.2~0.6 rad/s之间。模态峰值主要分布在中轴线附近位置。平台圆弧和直边界组合导致共振模态分布包括圆形水体环向模态特征和矩形水体模态特征;不同弦心距对应不同内域水体尺寸。随着内域水体尺寸减小,模态响应频率向高频移动;通过增加环形宽度和设置主迎浪面在突出平台位置,可降低波浪透射,从而减弱内域水体共振响应幅值。工程设计中可调整上述参数降低内域水体共振幅值,达到较好的泊稳条件。 相似文献
19.
Passive control of offshore jacket platforms 总被引：3，自引：0，他引：3
The wave-induced dynamic force is one of the most important excitations to be dealt with in the design of offshore structures. In order to perform a reliable design of an offshore structure, it is important to obtain an exact evaluation of its dynamic response but also to examine the ways of reducing the response. This paper presents the response of offshore jacket platforms installed with energy dissipation devices such as viscoelastic, viscous and friction dampers under wave loading. The offshore jacket platforms are modeled as multi-degrees-of-freedom system provided with dampers at each floor location. The wave forces are modeled as per Morison's equation. The governing equations of motion of the jacket platform with dampers are derived and their solution in the frequency domain is presented. The uni-directional random wave loading is expressed by the Pierson-Muskowitz spectrum. The response of the jacket platform with viscoelastic, viscous and friction dampers is compared with the corresponding response without dampers in order to investigate the effectiveness of the passive control systems. It is observed that the additional dampers add substantial damping to structure and thus favorably control the response of platform structure. Among the various energy dissipation devices used for study, the viscoelastic dampers perform better in comparison to the other dampers. This is due to the fact that the added viscoelastic dampers contribute to increased viscous damping as well as lateral stiffness which reduces the response of the offshore jacket platforms significantly. 相似文献
20.
Monitoring offshore platforms, long span bridges, high rise buildings, TV towers and other similar structures is essential for ensuring their safety in service. Continuous monitoring assumes even greater significance in the case of offshore platforms, which are highly susceptible to damage due to the corrosive environment and the continuous action of waves. Also, since a major part of the structure is under water and covered by marine growth, even a trained diver cannot easily detect damage in the structure. In the present work, vibration criterion is adopted for structural monitoring of jacket platforms. Artificial excitation of these structures is not always practicable and ambient excitation due to wind and waves may not be sufficient for collecting the required vibration data. Alternate methods can be adopted for the same purpose, for example, the application of an impact or a sudden relaxation of an applied force for exciting the structure. For jacket platforms, impact can be applied by gently pushing the structure at the fender while relaxation can be accomplished by pulling the structure and then suddenly releasing it using a tug or a supply vessel in both cases. The present study is an experimental investigation on a laboratory model of a jacket platform, for exploring the feasibility of adapting vibration responses due to impulse and relaxation, for structural monitoring. Effects of damage in six members of the platform as well as changes in deck masses were studied. A finite element model of the structure was used to analyze all the cases for comparison of the results as well as system identification. A data acquisition and analysis procedure for obtaining the response signatures of the platform due to the impulse and relaxation procedure was also developed for possible adoption in on-line monitoring of offshore platforms. From the study, it has been concluded that both impulse and relaxation responses are useful tools for monitoring offshore jacket platforms. The present work forms the basis for the development of an automated, on-line monitoring system for offshore platforms, using neural networks. 相似文献