共查询到20条相似文献，搜索用时 62 毫秒
1.
《海洋科学集刊》2016,(0)
温盐深测量仪(CTD)是目前国际上应用最为广泛的物理海洋调查仪器设备之一。2014年,中国科学院海洋研究所在黄海布放的潜标上搭载了3种不同型号的CTD(37Coastal、CTD48和304Plus),本文分别对这3种CTD所获取的数据资料进行了对比分析。三者数据两两对比结果显示,37Coastal与CTD48压力及温度数据最为接近,盐度数据则为37Coastal与304Plus相差最小。3种设备的压力、温度及电导率数据稳定性对比结果如下:37Coastal压力数据稳定性表现最好;三者温度数据稳定性表现一致;而37Coastal盐度数据稳定性和CTD48一致。三种设备均能适应海洋真实的物理环境参数变化观测,同时各自有其不同的使用环境,对于不同海域环境使用需要进行详细评估,综合各个方面的因素确定最终适合自身科学研究需求的方案。 相似文献
2.
走航式海洋多参数剖面测量系统(MVP)是一种集成程度和自动化程度都较高的海洋调查设备,能对多要素进行同时观测,获得高水平空间分辨率的数据资料。MVP由于温度和电导率传感器响应时间的不匹配,下放速度过快(峰值速度4m/s)而造成非常严重的盐度尖峰现象。本研究通过结合F法、GM法和Grose法提出的盐度尖峰订正方案,提出了一种新的方法Match conductivity and temperature response times法,对压力、温度和电导率传感器三者进行响应时间的匹配来减弱盐度尖峰。与SBE-9型CTD资料进行对比发现订正后的资料误差比订正前减小80%,与CTD盐度曲线互相关程度为0.917。对比35N断面修正前后的盐度资料发现订正后温盐跃层处出现的低盐区域消失,与CTD断面资料对比结果显示MVP资料比CTD资料在细结构上更具有优势。 相似文献
3.
基于目前国内海洋仪器的现状,为了对国产温盐深剖面仪(Conductivity-Temperature-Depth profiler,CTD)的性能和实际使用情况有个量化的结果,在我国南海东北部海域对国内较为成熟且具备产品化条件的两型国产CTD开展第三方独立检验与验证。比测过程中,采用同架捆绑,同步下放的方法进行测量。数据处理时,采用一种简便的移相相关法,对国产CTD的压力(P)、温度(T)、电导率(C)、盐度(S)与标准CTD进行对比分析。试验结果表明两者数据曲线趋势一致,线形基本吻合,参试的国产CTD基本上达到自身产品标称精度,但低于标准CTD精度。本次比测结果有利于促进技术成果的完善与固化,有利于进一步提高设备的可靠性、稳定性和批量一致性,为国产海洋环境监测设备的规模化应用和推广提供数据支撑。 相似文献
4.
水下滑翔机可以高效地观测海水的温度、盐度和压强等海洋参数,但由于热滞后效应,盐度数据,特别是在温度梯度较大的温跃层,会出现一定程度的偏差。本研究选取了3种目前常用的盐度热滞后订正方法,对带泵的“海翼号”水下滑翔机,于2019年8月在中北太平洋所观测的盐度数据因热滞后效应引起的偏差进行订正处理,与船载911型温盐深测量仪(Instrument for Measuring Conductivity Temperature and Depth,CTD)观测盐度进行对比,在比较了3种方法对滑翔机盐度订正前后下降和上升剖面偏差的减少程度、订正后剖面与船载CTD观测剖面的偏差大小和下降上升温盐曲线(T-S曲线)的一致程度后,得出了水下滑翔机盐度订正的最优方法,即在订正电导池中实际温度的前提下,采用计算机图形分割方法,最小化滑翔机机载CTD测得的下降和上升两个剖面T-S曲线围成面积所确定的目标函数,来确定合适的热滞后修正振幅和时间常数,从而修正下降和上升两个剖面之间盐度偏差。 相似文献
5.
CTD是测量海水温度、电导率和压力的仪器,在海洋科学考察、海洋资源调查开发、海洋环境监测预报和海洋军事研究中应用广泛。SZC15-4型多参数CTD是国产SZC15系列CTD最新型号,用于测量海水的温度、电导率、深度和叶绿素浓度,适用于近岸海洋调查。文中介绍了SZC15-4型多参数CTD剖面仪的性能、工作原理、系统组成和工作流程。并通过海上试验,与SBE19CTD在相同环境条件、相同采样速率下作比测,通过对实验数据做相关运算得出SZC15-4型CTD与SBE19在温度、盐度相关性优于0.999 9,表明两种仪器具有很高的相关特性。 相似文献
6.
走航式海洋多参数剖面测量系统(moving vessel profiler,MVP)是一种集成程度和自动化程度都较高的海洋调查设备,能对海洋多要素进行同时观测,获得水平方向的高分辨率数据资料。由于温度和电导率传感器响应时间的不匹配,MVP下放速度过快(峰值速度4 m/s)而造成非常明显的盐度尖峰现象。本研究结合Fofonoff(F)法、时间常数指数递归数字滤波(Giles and McDougall,GM)法和Grose提出的盐度尖峰订正方案,提出了一种新的方法,即MCT(match conductivity and temperature response time)法,通过对压力、温度和电导率传感器进行响应时间的匹配来减弱盐度尖峰。将SBE-9型CTD资料作为标准,发现订正后的资料与CTD盐度曲线的互相关系数为0.917,误差比订正前减小80%。对比35°N断面修正前后的盐度资料,订正后温盐跃层处出现的低盐区域消失。MVP的应用比常规海洋调查仪器CTD对于海洋现象的观测更有优势。 相似文献
7.
为满足水下滑翔器连续获取海洋剖面水文动力高质量数据的应用需求,利用自主研制的电磁感应式电导率传感器,集成快速响应的热敏电阻与压力传感器,以PIC18F2520单片机为电路系统的核心控制器,设计出一种适用于水下滑翔器搭载的微型化、低功耗、重量轻的SZQ1-1新型CTD传感器。该CTD测量仪经实验室多次标定,数据质量达到海试要求。2016年10月,该CTD传感器与海鸟SBE19 Plus在青岛胶州湾进行了海试比测。海试结果证明,该CTD传感器与SBE19 Plus测量结果相近,实时获取的温、盐、深剖面数据精度满足水下滑翔器的搭载要求。 相似文献
8.
数据集整体的时空覆盖率制约了海洋科学研究的时空尺度,而海洋仪器的性能和观测方式直接决定了海洋数据的可靠性。以观测仪器作为主要衡量指标,结合数据集的时空覆盖率,对以温度和盐度为数据集主体的自持式拉格朗日环流剖面观测(Argo)数据集、全球温盐剖面数据集(GTSPP)、世界海洋数据集(WOD)进行分析和比对,确定了三者关系:Argo和GTSPP都是WOD的数据源,而GTSPP中包含了Argo实时数据的80%。在此基础上研究确定了目前温盐数据的主要观测仪器为Argo浮标、XBT和CTD,并对这三种仪器的误差来源和量级进行详细分析:由于全球自动观测与传输需求,Argo数据存在电子信号不稳定导致的随机误差,而且在高纬度强温跃层地带出现较强的虚假盐度尖峰,再是自由漂移的特性导致1%~2%盐度剖面漂移超过0.02 PSS-78;由于下降方程的不断演变,全球半数XBT数据提供者并未提供仪器型号,导致数据整体的可靠性下降;由于CTD基本采用船载观测,因此成本高、共享数据少且多集中近海。因此在对全球温盐数据进行应用时,应综合考虑观测仪器的可靠性和时空覆盖率,有效实现对资料本身误差和真实海洋现象的甄别。 相似文献
9.
10.
高精度的温盐深测量仪（Conductivity-Temperature-Depth,CTD）是实现海洋动力环境背景要素长期连续观测的最重要的海洋观测设备之一。尽管国产CTD的研制已经取得了一系列应用成果,但是基于深海潜标平台的多深度的CTD比测工作仍然较少。本文基于“十三五”期间国家重点研发项目研发的准实时传输潜标平台所搭载的三组国产CTD与进口的CTD所获取的数据进行了详细的比对分析。在潜标系统较为稳定的时刻,两者的平均温度差最小为0.001℃,平均盐度差最小为0.001 psu。比测结果表明：国产CTD在复杂的深海海洋环境下所测得的温盐深数据具有较高的稳定性与可靠性。国产高精度CTD的研制与应用对提高我国海洋现场连续和长期的观测能力,促进海洋基础科学研究的发展具有重要作用。 相似文献
11.
Arne Schnack-Friedrichsen Angela M. Davis Jim D. Bennell Dei G. Huws 《Marine Georesources & Geotechnology》2001,19(4):221-243
The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths. 相似文献
12.
Shigehisa Nakamura 《Marine Geodesy》2000,23(1):55-61
Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone. 相似文献
13.
The effect of different fixation and storage protocols on the flow cytometric (FCM) simultaneous analysis of bacterioplankton and phytoplankton in coastal seawater samples (Mediterranean coastal lagoons) was investigated. FCM measurements (cell number, fluorescence and scatter characteristics) were obtained through DAPI staining. Three fixatives [glutaraldehyde (GA), formaldehyde (FA) and paraformaldehyde (PFA)] and two storage (3 months duration) methods (5 °C and −196 °C) were tested. Two dominant populations were detected in studied samples: bacteria and eukaryotic picophytoplankton. Adding fixatives (2% final concentration) appears necessary to obtain FCM exhaustive counts of all the bacteria and phytoplanktonic cells. This was related to the permeation effect of fixatives which allowed a better DAPI staining of the cells. Maximum fluorescence, i.e. optimal staining of the cells was obtained with FA or PFA, and significant lower fluorescences with GA. Fixed samples stored at 5 °C induced rapid cell loss. Only storage in liquid nitrogen of samples fixed with FA or PFA, allows mid-term (≥4 months) preservation of bacteria or picophytoplankton cell numbers, and limited evolution of DAPI-induced fluorescence and scatter characteristics. 相似文献
14.
Coastal inundation associated with extreme sea levels is the main factor which leads to the loss of life and property whenever a severe tropical cyclonic storm hits the Indian coasts. The Andhra and Orissa coasts are most vulnerable for coastal inundation due to extreme rise in sea levels associated with tropical cyclones. Loss of life may be minimized if extreme sea levels and associated coastal flooding is predicted well in advance. Keeping this in view, location specific coastal inundation models are developed and applied for the Andhra and Orissa coasts of India. Several numerical experiments are carried out using the data of past severe cyclones that struck these regions. The simulated inland inundation distances are found to be in general agreement with the reported flooding. 相似文献
15.
16.
《海洋学报(英文版)》2014,(9):F0003-F0003
<正>Acta Oceanologica Sinica(AOS)is a comprehensive academic journal edited by the Editorial Committee of Acta Oceanologica Sinica and is designed to provide a forum for important research papers of the marine scientific community which reflect the information on a worldwide basis.The journal publishes scholarly papers on marine science and technology,including physics,chemistry,biology, 相似文献
17.
Hoi-Soo Jung Kap-Sik Jeong Yong-Shik Chu Sung-Hyun Park Ki-Hyune Kim 《Marine Georesources & Geotechnology》2001,19(3):181-195
Grain size and water content in box-core sediments from the Clarion-Clipperton fracture zone (C-C zone) in the northeast equatorial Pacific were analyzed in detail to understand the downcore variations across a hiatus between Quaternary and Tertiary layers. Grain-size distributions in the topmost core sediments show two modes: a coarse mode (peaked at 50 μm) and a fine mode (at 2-25 μm). The coarse mode disappears gradually with depth accompanied by the dissolution of siliceous fossil tests, whereas the fine mode coarsens due to the formation of authigenic minerals. Water content increases abruptly across a color boundary between an upper pale brown layer and a lower dark brown layer that is the hiatus between Quaternary and Tertiary layers. Abundant smectites and microvoid molds, which are created by the prolonged fossil dissolution in the underlying sediment, are attributed for the abrupt downcore variation of water content. Overall variations in grain size and water content in the topmost core sediments in the western C-C zone are possibly constrained by the dissolution of biogenic siliceous fossils. Variations in geotechnical properties related to these changes must be considered in the design of nodule collectors. 相似文献
18.
Shigehisa Nakamura 《Marine Geodesy》2001,24(1):27-33
This article concerns an interrelation between the sea levels and the western boundary flow near a tectonic boundary in a local zone in the Northwestern Pacific. In this zone, sea level variations at stations located on the coast facing the Pacific are studied to find the interrelation between variations of the Kurosio flow as an index of the distance of the flow axis off a specific coast. The result is discussed after data processing of the monthly means of the sea levels, and a notice is taken of variations caused by active crustal upheavals during a seismic event, a local earthquake. 相似文献
19.
This study tests the hypothesis that the in situ void ratio of surficial marine sediments may be predicted from shear wave velocity-depth data with a reliability equal to that of other methods currently available. Shear wave velocity is fundamentally controlled by the number of grain-to-grain contacts per unit volume of material and by the effective stress across those contacts. In this study, three previously established empirical formulae are used to predict void ratio from velocity-depth data. Field data were acquired along a transect off the northern Californian coast across which water depth increased from 35 to 70 m and seafloor sediment type varied from sand to silty-sand, respectively. A towed seafloor sled device was used to collect shear wave refraction data, and a marked, systematic decrease in velocity was observed along the line, ranging from 35-70 m/s for the coarse, near-shore material to 25-40 m/s for the finer, offshore deposits. Void ratios predicted from these velocities were compared with data measured directly from box-core samples. Of the formulae used for prediction, two agree remarkably well with the control data. Both predicted and control values increase from 0.6-0.8 for the sandy material to 1.1-1.5 for the silty-sand. Thus, this study does not disprove the hypothesis set and demonstrates the potential of field shear wave velocity-depth data as a means of delineating spatial variation in void ratio for surficial marine sediments in a remote, nondestructive manner. 相似文献
20.
Particulate samples were collected from the Changjiang river system during a flood period, in May 1997, and POC, stable isotope and lipids associated with particles were examined. Results showed the decrease (0.84% ～ 1.88%) of organic carbon content from the upper reaches to the estuary.δ13C values of particulate organic carbon was in the range of -24.9×10-3 to -26.6×10-3, which were close to the isotopic signature of continental C3 vegetation. Total particulate n-alkanes concentrations varied from 1.4 to 10.1μg/dm3,or from 23.7 to 107μg/g of total suspended matter. Fatty acids were present in all the samples, from 1.4 to 5.4μg/dm3, with saturated and unsaturated straight-chain and branched compounds in the carbon number range from C12 to C30. Both δ13C and the ratio of carbon content to nitrogen content indicate the predominance of terrestrial inputs (soil organic matter) among the particles. The biomarker approach has been used to identify the relative portion of terrigenous and autochthonous fraction in the particulate samples. The distribution of fatty acids suggests a striking phytoplanktonic and microbial signal in most particle samples. The terrestrial alkanes are used to estimate the contribution of terrestrial inputs along the mainstream. 相似文献