首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 131 毫秒
1.
基于对苏北盆地盐城组下段砂岩储层概化建立二维径向剖面模型,运用TOUGH2/ECO2N程序模拟深部咸水层中CO2迁移分布过程。采用定性(Morris法)和定量(Sobol和EFAST法)全局敏感性分析方法,以储层中注入井处的压力、气相CO2总量及CO2气相羽扩散距离作为模型响应变量,对储层的水平渗透率、孔隙度、残余液体饱和度、孔隙分布指数、压缩系数、进气压力的倒数和盐度7个参数进行全局敏感性分析,讨论了咸水层的水文地质参数、盐度及其他模型参数对CO2封存运移泄漏过程的影响。Morris和Sobol法的敏感性分析结果都表明,对于不同的响应变量,参数的敏感性排序不同:以注入井处的压力为响应变量时,孔隙度的敏感性最高;以气相CO2总量和CO2羽扩散距离为响应变量时,水平渗透率的敏感性最高。EFAST 1阶及总敏感度分析结果与Sobol分析结果基本一致,但EFAST法相对Sobol法计算更高效稳健,需要的样本数较少。  相似文献   

2.
地下水数值模拟不确定性分析旨在提高研究区域地下水流的模拟精度。学者们将地下水数值模拟不确定性分析分为:模型的不确定性、参数的不确定性以及资料的不确定性三类,其中参数的不确定性分析在研究中是最为重要的。同时,对模型、参数、资料不确定性分析的研究进展和成果进行归纳总结,补充关于参数不确定性分析过程中的替代模型的一些研究成果以及模型不确定性分析的多模型分析;强调在地下水数值模拟的过程中,重视模型、资料的不确定性分析;展望未来,随着地下水数值模拟不确定性分析研究的深入,方法和应用会更加多样化。  相似文献   

3.
陈冲  张伟  邢庆辉  豆沂宣 《冰川冻土》2022,44(6):1912-1924
黑河流域中下游地下水系统受上游冰冻圈融水和降雨的补给,由气候变暖导致的冰冻圈萎缩致使中下游地下水系统的稳定性面临更多的风险。地下水模型是地下水系统稳定性评估的有效手段,但是地下水模型参数往往存在较大的不确定性。为此,本文提出了基于数据同化算法的不确定性分析方法,通过包含观测资料信息减小模型不确定性。采用所提方法分析了(基于MODFLOW构建)黑河流域中游地下水模型中13个参数的不确定性,讨论了算法超参数的影响及其最优取值,分析了地下水模型参数的不确定性。实验结果证明数据同化算法可有效减小地下水模型参数的不确定性,观测资料的种类与数量对参数不确定性的减小起到重要作用;不同地下水模型参数的不确定性不同,地表水与地下水相互作用频繁的区域参数不确定性较大;含水层渗透系数、含水层给水度以及灌溉回流系数对模型输出的地下水位输出影响显著,河床水力传导系数对模型输出的河流流量影响较大。本研究将为地下水研究提供更加可靠的模型方法,为西北内流区地下水哺育的绿洲生态系统稳定可持续研究提供重要支撑。  相似文献   

4.
UCODE反演程序的原理及应用   总被引:2,自引:0,他引:2  
夏强  万力  王旭升  E.Poeter 《地学前缘》2010,17(6):147-151
对地下水模型进行反演是模拟过程中的一个必要步骤,使用反演程序自动校正模型可快速确定最佳拟合的参数值,分析参数对模拟结果的敏感性,比人工试算-调整法更为优越。UCODE是一款被广泛应用的地下水模型反演程序,它使用高斯牛顿法进行参数优化,反演结果对参数初值有一定的依赖性。通过建立假想的非稳定流模型,进行6组数值试验,验证了UCODE程序的实用性。尽管参数的初始取值会影响反演的进程,但只要取值适当,UCODE就能实现优化参数的目的。  相似文献   

5.
针对Noah-MP模型多参数化方案、模拟结果不确定性范围难以确定的特点,选取北疆地区具有代表性的阿勒泰站气象资料作为模型驱动数据,探讨了积雪对多参数化方案的敏感性。在不考虑模型参数和驱动数据不确定性的条件下,设计了集合数为13824的多参数化方案集合模拟试验。选用Natural selection方法对物理过程的敏感性进行分析,并在敏感性分析结果的基础上进一步讨论了模拟结果的不确定性。结果表明:积雪对地表热交换、雨雪分离、土壤温度底层边界条件和第一层积雪或土壤时间方案4个物理过程敏感;在不考虑驱动数据和模型参数不确定性的条件下,多参数化方案集合模拟试验中的不确定性主要来源于敏感物理过程。去除敏感物理过程中能够明显降低模拟性能的参数化方案后,集合模拟结果的不确定性大幅减小。最后,根据分析结果构建了该站雪深和雪水当量模拟的最优参数化方案组合。  相似文献   

6.
GMS数值建模方法研究综述   总被引:6,自引:0,他引:6  
贺国平  张彤  赵月芬  周东 《地下水》2007,29(3):32-35,38
GMS 和 FEFLOW 为地下水数值模拟软件的典型代表,FEFLOW 具有强大的可视化功能和方便的输入输出,其缺点是难以处理复杂的水文地质条件,而 GMS 具有强大齐全的地下水模拟功能,几乎囊括了与地下水有关的所有模拟功能,包括地下水随机模拟.详细介绍了基于有限差分原理的 GMS 软件中的各个模块,以及采用 GMS 软件组建地下水数值模拟模型的各种方法,包括网格法、概念模型法和 Solid 法.  相似文献   

7.
Monod动力学方程被广泛应用于描述地下水中有机污染物微生物降解过程。由于Monod方程参数众多,采用敏感性分析可识别参数的重要程度,有助于参数反演和理解微生物降解过程。已有敏感性分析一般仅关注敏感性的整体平均值及其随空间的变化,很少考虑敏感性随时间的变化。以一个好氧生物降解甲苯的一维砂柱试验为例,基于iTOUGH2采用Morris法和Sobol’法对降解过程参数及试验条件参数开展全局敏感性时变分析。研究结果发现,由于微生物好氧降解能力随时间先提高后减弱,导致降解过程参数的敏感性相应地随时间先增加后减少。最大基质降解速率k的Sobol’一阶敏感性指数在试验早期小于10%,中期最大为62%,晚期减至49%。参数间的相互作用效应随时间先增大后减小。k的参数间相互作用效应根据Sobol’总敏感性指数与一阶敏感性指数的差值表征,该值在试验早期和晚期近乎为0,中期达6%。通过敏感性以及参数间相互作用效应的时变分析发现,试验晚期的观测数据对模型过程参数的敏感性较大以及相互作用效应较小,因此选择试验晚期数据更有利于降解过程参数的反演识别。同时由于试验条件参数在早期敏感性较大,为避免试验条件控制不当导致的观测数据误差增大,试验早期应较中期和晚期更严格控制试验条件。  相似文献   

8.
目前"井孔-含水层"系统处理的三种主要方法:基于线汇理论的井孔模拟、高渗透系数法和渗流-管流耦合模型,评述了各种方法的优缺点,重点指出了传统线源(汇)法理论上的缺陷及实际应用中的局限性。概括了MODFLOW,TOUGH2,FEFLOW等地下水数值模拟软件对井孔含水层模拟的方法;应加强井周小尺度水流水质的精细研究,并研究井周水流运动对水质的作用,以及对大尺度地下水模拟的影响。  相似文献   

9.
淮北市用水主要取自地下水,开采量大,开采布局不合理已引发一系列环境问题。建立可靠的地下水流数值模拟模型,对于定量评价淮北市地下水资源、优化开采布局具有重要的现实意义,而目前针对淮北市进行的地下水数值模拟研究尚不多见。在分析安徽淮北市水文地质条件的基础上,建立了研究区水文地质概念模型和地下水流数学模型。并应用灵敏度分析法及蒙特卡罗法对模拟层的水文地质参数进行不确定性分析。灵敏度分析结果表明,含水层的给水度或单位释水系数及弱透水层的垂向渗透系数对模拟结果的影响最大,获得了各层灵敏度最大的参数分区,可为今后野外勘察试验提供参考。蒙特卡罗法结果直观地反映出各层敏感性分布,进一步证明了确定性模型的合理性。  相似文献   

10.
李谦  张静  宫辉力 《水文》2015,35(3):43-48
敏感性分析和不确定性分析是分布式水文模型参数校准和模型应用的基础。本文以妫水河流域为例,基于SWAT模型和SUFI-2算法进行模型参数敏感性分析,结合手动调参和自动率定,通过SUFI-2的P因子和R因子进行模型不确定性分析,构建妫水河流域分布式水文模型。本次妫水河流域月尺度模拟中:率定期,确定系数R2=0.59,效率系数NSE=0.56;验证期,确定系数R2=0.82,效率系数NSE=0.80;P因子均大于0.5,R因子均小于0.5。结果表明,妫水河流域SWAT模型水文模拟效果较好。  相似文献   

11.
以29口钻孔的重矿物百分含量数据来分析样本,通过Q型聚类分析、因子分析方法恢复不同物源体系的发育范围及其母岩类型,并以不同物源体系的边界范围为限定条件,结合ZTR指数及其等值线图,对珠江口盆地惠州凹陷M层物源特征进行了系统的研究。研究结果表明:研究区发育3大物源沉积区,分别为东北-北部物源沉积区、西北物源沉积区和东南物源沉积区,且各区重矿物组合特征明显,主次物源分明,整体表现为母岩类型复杂的特征。东北-北部沉积物主要母岩为酸性岩浆岩,次要母岩为变质岩和沉积岩,西北沉积物主要母岩为中性及基性岩浆岩,次要母岩为酸性岩浆岩和变质岩,东南沉积物主要母岩为中性及基性岩浆岩,次要母岩为变质岩。东北-北部物源区和西北物源区为远源沉积的产物,而东南物源区为近源沉积的产物。东北-北部物源区沉积物来自北方和东北方向,而西北物源区和东南物源区沉积物分别来自西北方向和东南方向。  相似文献   

12.
两种煤质分析指标的关联方程组研究   总被引:5,自引:0,他引:5  
在综合分析大量文献资料的基础上,采用多元线性回归方法,利用MATLAB对大量煤质分析结果进行了回归分析,推导出了煤质元素分析与工业分析的关联方程组。新方法实现了由工业分析结果求元素分析成分的目的,具有重大的实用意义。  相似文献   

13.
An algorithm andFortran-iv computer program,cabfac, forQ-mode factor analysis is described. The program will accept up to 1500 items and 50 variables on a moderate-size computer.  相似文献   

14.
A piston core from the southern Blake Basin penetrated nine distinct bioclastic carbonate turbidites separated by pelagic terrigenous clay units. X-ray diffraction analysis of the carbonate mineralogy of the graded, laminated, and homogenous units of the individual turbidite units indicated a general loss of unstable carbonates in the homogenous unit beyond that contained in the lower two units. Univariate and multivariate statistical tests were employed to determine the significance of the changes and to determine if different units of a turbidite sequence could be consistently grouped by statistical methods. Principal components, discriminant function, and cluster analysis were used in the multivariate tests. The graded and laminated units were closely related in mineralogy with little significant differences. The mineralogy of the homogenous units was significantly different than that of the other two units except in one example. Cluster analysis generated five groupings of the samples with the end members consisting of graded and laminated units at one end and homogenous units at the other.  相似文献   

15.
In this paper, we report on the use of Bayesian networks, BNs, learnt from data generated by physical and numerical models, to overcome to a certain degree a number of complications in traditional slope stability analyses that jointly consider the mechanical and hydraulic properties of soils. Discrete Bayesian networks resulted to be useful and efficient to acquire knowledge from simulated data and to identify significant factors by the combined use of backward inference and global sensitivity analysis. Further, BNs enable decision thresholds to be estimated quickly. Along with this, backward inference and global sensitivity analysis are performed in BNs at low computation costs. Moreover, under conditions in which knowledge is scarce, we show how a practitioner can be better informed using the proposed approach. All these previously under-reported modelling features in the specialised literature encourage the further application of the proposed approach to enhance slope stability analysis.  相似文献   

16.
以有限元结构矩阵分析为理论基础,结合应力应变测试和现场实际使用情况,利用计算机结构分析程序,对ZT-A系列三个不同高度钻塔的天梁、塔腿和绷绳做了结构应力分析,弄清了A形塔在承受垂直荷载、水平荷载以及偏载条件下,组成钻塔的各构件的荷载及应力分布;对钻塔设计提出了改进意见;并从整体角度分析了绷绳的作用;对在不同荷载条件下有无绷绳时钻塔的结构应力从量上做了对比;最后提出了应当如何布置提升系统才会使钻塔处  相似文献   

17.
A deformation mechanism is described and analyzed. It is intended for height patterns exposed to erosion and tectonic activity. A simulation experiment is carried out for this model. Closedform expressions are derived for the covariance field, the properties of spectral estimates, and for the optimal retrospective reconstruction of earlier, unknown height patterns. For obvious reasons the author is in no position to make claims about the verisimilitude of the model. It is offered as an example of a potential application to geology of the theory of patterns developed by the author and his coworkers in recent years. It is hoped that those more qualified than the author in the subject matter area can extend and modify the analysis to make it closer to geological reality. supported by NSF grant GJ-3100X.  相似文献   

18.
Finite element limit analysis with plane strain condition is employed to determine the upper and lower bound solutions of the undrained limiting pressure behind soil gaps and the lateral force acting on a pile per unit length in a contiguous pile wall. Computed bound solutions confirm serious limitations of existing studies in predicting these two solutions. Predicted failure mechanisms and the arching effect behind soil gaps are discussed. A closed-form equation of the limiting pressure factor is proposed for a convenient and accurate prediction of the lateral force acting on a pile in contiguous pile walls in practice.  相似文献   

19.
On the basis of samples taken from a known topographic surface, the parameters of two types of linear models are estimated. The first category is defined by polynomials or trigonometric functions, whose parameters are simultaneously computed from available data. In the second category a set of local centers is defined, and in the neighborhood of each center a fixed-degree polynomial is developed. An approximative resemblance index is calculated, and contour maps corresponding to various models are compared with the topographic map. It is found that with an increasing number of grid points, maps of local polynomials are converging both in continuity and in resemblance. For a sufficient number of grid points, this resemblance is always higher than those produced by models of the first category.  相似文献   

20.
正Shrimps of genus Artemia are the inhabitants of continental and marine waters with salinity of 70 to 350 g/l and above.Artemia is able to survive in the conditions in which other animals cannot exist.This is due to adaptations:effective osmoregulation system,the ability to synthesize of respiratory pigment(hemoglobin)and diapauses cysts(Litvinenko at.al.,2009).Cysts of this  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号