首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Mineralogical studies demonstrate that the Hercynian polymetallic antimony-rich deposit of Bournac can be described by four stages of ore deposition and one of partial ore remobilization. Fluid inclusion data permit calculation of the composition and temperature of the fluids associated with each stage of hydrothermal mineralization and concomitant wall-rock alteration. Stages I and II (Fe-As and Zn) are represented by moderate-salinity H2O-CO2-(NaCl) inclusions which correlate closely with early carbonate deposition. Stage III fluids which are responsible for the deposition of Pb-Sb ores are characterized by low-salinity H2O-(NaCl) inclusions. During the final stage of mineralization (IV), corresponding to the main phase of stibnite deposition, abundant aqueous inclusions confirm the continued involvement of low-salinity fluids and the intense development of potassic clays and secondary silica in the wall rocks. Homogenization temperatures suggest that the whole cycle of mineralization took place during a gradual decrease in fluid temperature of 380°–140°C. Stibnite deposition is restricted to the interval of 230°–140°C thus confirming an essentially epithermal environment. Stage V (partial remobilization) is distinguished by the presence of high-salinity CaCl2-rich inclusions which are tentatively related to Triassic barite mineralization in the region and therefore postdate the Bournac antimony ores. Homogenization temperatures for this stage range 140°–60°C.  相似文献   

2.
Mineralized veins at Major's Creek consist of preponderant quartz and carbonate gangue with gold, Au-Ag tellurides and base metal sulphides within silicified and sericitized dykes or granodiorite of the Braidwood Granite. Fluid inclusion studies indicate deposition throughout the range 350–80°C by low salinity fluids. Significant Au-Ag telluride mineralization took place at a temperature of about 155°C. Mineral deposition was due to the separation of a liquid CO2 phase from an originally CO2-rich aqueous fluid. Observed argillic alteration is a consequence of acid leaching above the boiling zone. Mineralization is epithermal in character and probably formed during the existence of a hydrothermal convective system. A relationship with similar epithermal gold deposits in the adjacent Eden-Yalwal Rift zone is inferred.  相似文献   

3.
Tungsten ore at Carrock Fell Mine comprises wolframite and scheelite in polyminerallic quartz veins which traverse the Grainsgill Granite cupola and surrounding country rocks. In the veins, a wolframite-scheelite-apatite assemblage pre-dates a scheelite-arsenopyrite-pyrite (plus other sulphides) assemblages. Temperatures of mineralisation declined from a peak near 350°C to 170°C, and the hydrothermal fluid contained about 6 weight% NaCl and 3 wt% NaHCO3. Contemporaneous greisenisation involved loss of Na, Cr, Ca and Ba from granite, but Si and K were retained while B, Be and Al increased slightly. Sn also increased but is always a trace constituent, and F appears to have decreased. Zones of intense alteration contain high concentrations of quartzhosted fluid inclusions resulting from penetration of the granite by fluid chemically similar to that in the vein quartz. The W-rich, Sn-poor nature of the mineralisation may relate to the weakly saline, F-deficient but CO2-rich fluid chemistry. The alteration and mineralisation processes took place during late cooling of the Lower-Devonian Skiddaw Granite. Cross-cutting quartz-ankerite veins and argillitic zones which may be considerably younger than those producing the tungsten ore, have a distinct mineral suite lacking W and As and including major Pb and Zn. Temperatures at this late stage were below 150°C, and the fluid is estimated to have contained approximately 12 wt% NaCl and 15 wt% CaCl2.  相似文献   

4.
The Serrinha gold deposit of the Gurupi Belt, northern Brazil, belongs to the class of orogenic gold deposits. The deposit is hosted in highly strained graphitic schist belonging to a Paleoproterozoic (∼2,160 Ma) metavolcano-sedimentary sequence. The ore-zones are up to 11 m thick, parallel to the regional NW–SE schistosity, and characterized by quartz-carbonate-sulfide veinlets and minor disseminations. Textural and structural data indicate that mineralization was syn- to late-tectonic and postmetamorphic. Fluid inclusion studies identified early CO2 (CH4-N2) and CO2 (CH4-N2)-H2O-NaCl inclusions that show highly variable phase ratios, CO2 homogenization, and total homogenization temperatures both to liquid and vapor, interpreted as the product of fluid immiscibility under fluctuating pressure conditions, more or less associated with postentrapment modifications. The ore-bearing fluid typically has 18–33mol% of CO2, up to 4mol% of N2, and less than 2mol% of CH4 and displays moderate to high densities with salinity around 4.5wt% NaCl equiv. Mineralization occurred around 310 to 335°C and 1.3 to 3.0 kbar, based on fluid inclusion homogenization temperatures and oxygen isotope thermometry with estimated oxygen fugacity indicating relatively reduced conditions. Stable isotope data on quartz, carbonate, and fluid inclusions suggest that veins formed from fluids with δ18OH2O and δDH2O (310–335°C) values of +6.2 to +8.4‰ and −19 to −80‰, respectively, which might be metamorphic and/or magmatic and/or mantle-derived. The carbon isotope composition (δ13C) varies from −14.2 to −15.7‰ in carbonates; it is −17.6‰ in fluid inclusion CO2 and −23.6‰ in graphite from the host rock. The δ34S values of pyrite are −2.6 to −7.9‰. The strongly to moderately negative carbon isotope composition of the carbonates and inclusion fluid CO2 reflects variable contribution of organic carbon to an originally heavier fluid (magmatic, metamorphic, or mantle-derived) at the site of deposition and sulfur isotopes indicate some oxidation of the originally reduced fluid. The deposition of gold is interpreted to have occurred mainly in response to phase separation and fluid-rock interactions such as CO2 removal and desulfidation reactions that provoked variations in the fluid pH and redox conditions.  相似文献   

5.
The Dongpo tungsten ore deposit, the largest scheelite skarn deposit in China, is located at the contact of a 172-m. y. biotite granite with a Devonian marble. The mineralization associated with the granite includes W, Bi-Mo, Cu-Sn and Pb-Zn ores. Several W mineralization stages are shown by the occurrence of ore in massive skarn deposits and in later cross-cutting veins. The high garnet/pyroxene ratio, the hedenbergite and diopside-rich pyroxene and the andradite-rich garnet show the deposit belongs to the oxidized skarn type. Detailed fluid inclusion studies of granite, greisen, skarn and vein samples reveal three types of fluid inclusion: (1) liquid-rich, (2) gas-rich and (3) inclusions with several daughter minerals. Type (3) is by far the most common in both skarn and vein samples. The dominant daughter mineral in fluid inclusions is rhembic, highly birefringent, and does not dissolve on heating even at 530°C. We assume that this mineral is calcite. The liquid phase in most of the fluid inclusions has low to moderate salinities: 0–15 wt. %; in a few has higher salinities (30–40 wt. % NaCl equivalent). The homogenization temperatures of inclusions in the skarn stage range from 350°C to 530°C, later tungsten mineralization-stage inclusions homogenize between 200°C and 300°C, as do inclusions in veins. Fluid inclusions in granite and greisen resemble those of the late tungsten mineralization stage, with low salinity and homogenization temperatures of 200°–360°C. The tungsten-forming fluids are probably a mixture that came from biotite granite and the surrounding country rocks.  相似文献   

6.
Abstract. Denggezhuang gold deposit is an epithermal gold‐quartz vein deposit in northern Muru gold belt, eastern Shandong, China. The deposit occurs in the NNE‐striking faults within the Mesozoic granite. The deposit consists of four major veins with a general NNE‐strike. Based on crosscutting relationships and mineral parageneses, the veins appear to have been formed during the same mineralization epochs, and are further divided into three stages: (1) massive barren quartz veins; (2) quartz‐sulfides veins; (3) late, pure quartz or calcite veinlets. Most gold mineralization is associated with the second stage. The early stage is characterized by quartz, and small amounts of ore minerals (pyrite), the second stage is characterized by large amounts of ore minerals. Fluid inclusions in vein quartz contain C‐H‐O fluids of variable compositions. Three main types of fluid inclusions are recognized at room temperature: type I, two‐phase, aqueous vapor and an aqueous liquid phase (L+V); type II, aqueous‐carbonic inclusions, a CC2‐liquid with/without vapor and aqueous liquid (LCO2+VCC2+Laq.); type III, mono‐phase aqueous liquid (Laq.). Data from fluid inclusion distribution, microthermometry, and gas analysis indicate that fluids associated with Au mineralized quartz veins (stage 2) have moderate salinity ranging from 1.91 to 16.43 wt% NaCl equivalent (modeled salinity around 8–10 wt% NaCl equiv.). These veins formatted at temperatures from 80d? to 280d?C. Fluids associated with barren quartz veins (stage 3) have a low salinity of about 1.91 to 2.57 wt% NaCl equivalent and lower temperature. There is evidence of fluid immiscibility and boiling in ore‐forming stages. Stable isotope analyses of quartz indicate that the veins were deposited by waters with δO and δD values ranging from those of magmatic water to typical meteoric water. The gold metallogenesis of Muru gold belt has no relationship with the granite, and formed during the late stage of the crust thinning of North China.  相似文献   

7.
Several varieties of skarn outcrop have been found to develop along the contact between the Andorra granite and the Devonian limestones. The skarns contain variable amounts of gold ranging up to 5 g/t, always associated with sulphides. The sulphides in the skarn include arsenopyrite and pyrrhotite with lesser amounts of chalcopyrite, galena, sphalerite and Bi-minerals. Geothermometric and geobarometric data indicate the skarns formed at about 2 kbar and temperatures ranging from 500 ° to 350 °C from CO2-free polysaline brines at a slightly acidic pH and oxygen fugacity which decreases with time from the pyrite-pyrrhotite-magnetite towards the QFM buffer. Available data on gold solubility suggest that sufficient quantities of gold to form an ore deposit could have been transported as AuCl 2 - at the high temperatures and salinities under which the skarns formed. Both gold deposition and sulphide precipitation could have occurred due to a decrease in temperature and/or oxygen fugacity.  相似文献   

8.
The Gaogangshan Mo deposit, located in the northern part of the Lesser Xing'an Range (the eastern part of the Xing'an–Mongolia Orogenic Belt), is one of the newly discovered Mo deposits in northeast China. Ore bodies occur in the granite and are generally in vein and stockwork forms. Major metallic minerals in the ore include pyrite and molybdenite. The styles of mineralization are disseminated, veinlet–disseminated, and veinlet. The major types of wall–rock alteration are silicification–potassic alteration, phyllic alteration and propylitization. Fluid inclusion analyses indicate that the ore‐forming fluid during the major mineralization stage is an H2O–NaCl–CO2 system, with wide homogenization temperature and salinity ranges. The abundant CO2–rich and coexisting halite–bearing fluid inclusion assemblages in the main stage of mineralization highlight the significance of intensive fluid boiling for porphyry Mo mineralization. Comprehensive study of the ore‐forming conditions, geological features of the deposit, micro‐thermometric analysis of fluid inclusions and comparison of the Gaogangshan deposit with other typical porphyry deposits leads to the conclusion that the deposit is a porphyry type. We obtained a weighted mean age of the molybdenite deposit at Gaogangshan of 250.7 ± 1.8 Ma. The isotopic dating results indicate that the Gaogangshan deposit was formed in the Permo–Triassic, which is the earliest Mo–only deposit in northeast China. The formation of the Gaogangshan Mo deposit may be related to the extension and break–up of the Songnen Block and Jiamusi Block in the Permo–Triassic.  相似文献   

9.
The Rocabruna and Coll de Pal barite deposits, located in the eastern Pyrenees of Spain, fill karstic cavities within carbonate rocks of Cambrian and Devonian age, respectively. The deposits contain barite, chalcopyrite, tetrahedrite, pyrite and minor sphalerite and galena with saddle dolomite and quartz as gangue. Fluid inclusion data from Coll de Pal quartz and dolomite indicate that the mineralizing fluid was a polysaline CaCl2-rich brine, with temperatures between 125 and 150 °C. C and O isotopic compositions of carbonates in both deposits are consistent with a progressive increase in temperature during deposition. The 34S values of barite, which range from 14.2 to 15.9‰ in Coll de Pal, and from 13.9 to 19.3‰ in Rocabruna, together with 87Sr/86Sr ratios ranging from 0.7118 to 0.7168 in Rocabruna, and from 0.7115 to 0.7136 in Coll de Pal, indicate two different fluid sources. We propose that these deposits formed as a result of mixing between a Ba-rich, sulfate-poor hot fluid, and sulfate-rich solutions of surficial origin. The different Sr isotope ratios in the deposits indicate that the hot Ba-rich fluids involved in each deposit were equilibrated with different rock types (carbonates and shales), in agreement with the geology of the two areas. Received: 22 October 1997 / Accepted: 24 March 1998  相似文献   

10.
The Haobugao deposit, located in the southern segment of the Great Xing'an Range, is a famous skarn‐related Pb‐Zn‐(Cu)‐(Fe) deposit in northern China. The results of our fluid inclusion research indicate that garnets of the early stage (I skarn stage) contain three types of fluid inclusions (consistent with the Mesozoic granites): vapor‐rich inclusions (type LV, with VH2O/(VH2O + LH2O) < 50 vol %, and the majority are 5–25 vol %), liquid‐rich two‐phase aqueous inclusions (type VL, with VH2O/(VH2O + LH2O) > 50 vol %, the majority are 60–80 vol %), and halite‐bearing multiphase inclusions (type SL). These different types of fluid inclusions are totally homogenized at similar temperatures (around 320–420°C), indicating that the ore‐forming fluids of the early mineralization stage may belong to a boiling fluid system. The hydrothermal fluids of the middle mineralization stage (II, magnetite‐quartz) are characterized by liquid‐rich two‐phase aqueous inclusions (type VL, homogenization temperatures of 309–439°C and salinities of 9.5–14.9 wt % NaCl eqv.) that coexist with vapor‐rich inclusions (type LV, homogenization temperatures of 284–365°C and salinities of 5.2–10.4 wt % NaCl eqv.). Minerals of the late mineralization stage (III sulfide‐quartz stage and IV sulfide‐calcite stage) only contain liquid‐rich aqueous inclusions (type VL). These inclusions are totally homogenized at temperatures of 145–240°C, and the calculated salinities range from 2.0 to 12.6 wt % NaCl eqv. Therefore, the ore‐forming fluids of the late stage are NaCl‐H2O‐type hydrothermal solutions of low to medium temperature and low salinity. The δD values and calculated δ18OSMOW values of ore‐forming fluids of the deposit are in the range of ?4.8 to 2.65‰ and ?127.3‰ to ?144.1‰, respectively, indicating that ore‐forming fluids of the Haobugao deposit originated from the mixing of magmatic fluid and meteoric water. The S‐Pb isotopic compositions of sulfides indicate that the ore‐forming materials are mainly derived from underlying magma. Zircon grains from the mineralization‐related granite in the mining area yield a weighted 206Pb/238U mean age of 144.8 ±0.8 Ma, which is consistent with a molybdenite Re‐Os model age (140.3 ±3.4 Ma). Therefore, the Haobugao deposit formed in the Early Cretaceous, and it is the product of a magmatic hydrothermal system.  相似文献   

11.
The interaction of granitic rock with meteoric fluid is instrumental in determining the chemistry of pore fluids and alteration mineralogy in downflow portions of convective groundwater circulation cells associated with many hydrothermal systems in the continental crust. Hydrothermal experiments and a detailed mineralogical study have been carried out to investigate the hydrothermal alteration of the Carnmenellis Granite, Cornwall, UK. Samples of drill chippings from a borehole 2 km deep in the Carnmenellis Granite have been reacted with a dilute Na-HCO3-Cl fluid in hydrothermal solution equipment at temperatures of 80°, 150° and 250° C and a pressure of 50 MPa, with a water/rock mass ratio of 10, for experiment durations up to 200 days. Fluid samples were analysed for seventeen different chemical components, and solids were examined prior to, and after reaction using SEM, electron microprobe and conventional light optic techniques. Experimental fluids were mildly alkaline (pH 7–8.5) and of low salinity (TDS <800 mgl–1). Mineral-fluid reaction was dominated by the dissolution of plagioclase and the growth of smectite, calcite (at all temperatures), laumontite (at 150° C), wairakite and anhydrite (at 250° C). Final fluids were saturated with respect to quartz and fluorite. Certain trace elements (Li, B, Sr) were either incorporated into solids precipitated during the experiments or sorbed onto mineral surfaces and cannot be considered as conservative (partitioned into the fluid phase) elements. Concentrations of all analysed chemical components showed net increases during the experiments except for Ca (at 250° C) and Mg (at all temperatures). A comparison of the alteration mineralogy observed in the experiments with that present as natural fracture infills in drillcore from the Carnmenellis Granite reveals that the solid products from the experiments correspond closely to mineral assemblages identified as occurring during the later stages of hydrothermal circulation associated with the emplacement of the granite.  相似文献   

12.
The tin‐ and tantalum‐bearing pegmatites of the Bynoe area are located in the western Pine Creek Geosyncline. They are emplaced within psammopelitic rocks in the contact aureole of the Two Sisters Granite. The latter is a Palaeoproterozoic, fractionated, granite with S‐type characteristics and comprises a syn‐ to late‐orogenic, variably foliated, medium‐grained biotite granite and a post‐orogenic, coarse‐grained biotite‐muscovite granite. The pegmatites comprise a border zone of fine grained muscovite + quartz followed inward by a wall zone of coarse grained muscovite + quartz which is in turn followed by an intermediate zone of quartz + feldspar + muscovite. A core zone of massive quartz is present in some occurrences. Feldspars in the intermediate zone are almost completely altered to kaolinite. This zone contains the bulk of cassiterite, tantalite and columbite mineralization. Fluid inclusions in pegmatitic quartz indicate that early Type A (CO2 + H2O ± CH4) inclusions were trapped at the H2O‐CO2 solvus at P～100 MPa, T～300°C (range 240–328°C) and salinity ～6 wt% eq NaCl. Pressure‐salinity corrected temperatures on Type B (H2O + ～20% vapour), C (H2O + < 15% vapour) and D (H2O + halite + vapour) inclusions also fall within the range of Type A inclusions. Oxygen and hydrogen isotope data show that kaolin was either formed in isotopic equilibrium with meteoric waters or subsequent to its formation, from hydrothermal fluid, underwent isotopic exchange with meteoric waters. Fluid inclusion waters from core zone quartz show enrichment in deuterium suggesting metamorphic influence. Isotope values on muscovite are consistent with a magmatic origin. It is suggested that the pegmatites were derived from the post‐orogenic phase of the Two Sisters Granite. Precipitation of cassiterite took place at about 300°C from an aqueous fluid largely as a result of increase in pH due to feldspar alteration.  相似文献   

13.
The origin of secondary calcite-silica minerals in primary and secondary porosity of the host Miocene tuffs at Yucca Mountain has been hotly debated during the last decade. Proponents of a high-level nuclear waste repository beneath Yucca Mountain have interpreted the secondary minerals to have formed from cool, descending meteoric fluids in the vadose zone; critics, citing the presence of two-phase fluid inclusions, argued that the minerals could only have formed in the phreatic zone from ascending hydrothermal fluids. Understanding the origin, temperature, and timing of these minerals is critical in characterizing geologically recent fluid flux at the site, and has significant implications to whether waste should be stored at Yucca Mountain.Petrographic and paragenetic studies of 155 samples collected from the Exploratory Studies Facility (ESF) and repository block cross drift (ECRB) tunnels indicate that heterogeneously distributed calcite with lesser chalcedony, quartz, opal, and fluorite comprise the oldest secondary minerals. These are typically overgrown by intermediate-aged calcite, often exhibiting distinctive bladed habits. The youngest event recorded across the site is the deposition of Mg-enriched (up to ∼1 wt%) and depleted, growth-zoned calcite intergrown with U-enriched opal. The cyclical variation in Mg enrichment and depletion is probably related to climate changes that have occurred during the last few million years. The distribution of secondary minerals is consistent with precipitation in the vadose zone.Fluid inclusion petrography of sections from the 155 samples determined that 96% of the fluid inclusion assemblages (FIAs) contained liquid-only inclusions that formed at ambient temperatures (<35°C). However, 50% of the samples (n = 78) contained relatively rare FIA that contain both liquid-only and liquid plus vapor inclusions (herein termed two-phase FIAs) that formed at temperatures above 35°C. Virtually all of these two-phase FIAs occur in paragenetically old calcite; rare two-phase inclusion assemblages were also observed in early fluorite and quartz, and early-intermediate calcite. Homogenization temperatures (≡ trapping temperatures) across Yucca Mountain are generally 45 to 60°C, but higher temperatures reaching 83°C were recorded in calcite from the north portal and ramp of the ESF. Cooler temperatures of ∼35 to 45°C were recorded in the intensely fractured zone. Multiple populations of two-phase FIAs from lithophysal cavities in the ESF and ECRB cross drift indicate early fluid cooling with time from temperatures >45°C in early calcite, to <35 to 45°C in paragenetically younger calcite. Freezing point depressions range from −0.2 to −1.6°C, indicating trapping of a low salinity fluid. The majority of intermediate calcite and all outermost Mg-enriched calcite contains rare all-liquid inclusions and formed from ambient temperature (<35°C) fluids.Carbon and oxygen isotope data reveal a consistent trend of decreasing δ13C (from 9.5 to −8.5‰) and increasing δ18O (from 5.2 to 22.1‰) values from paragenetically early calcite to Mg-enriched growth-zoned calcite. Depleted δD values (−131 to −90‰) of inclusion fluids from intermediate and the youngest Mg-enriched calcite indicate derivation from surface meteoric fluids. Recalculation of δ18OH2O values of −12 to −10‰ is consistent with derivation from paleometeoric fluids.Results of integrated U-Pb dating (opal and chalcedony) and fluid inclusion microthermometry indicate that two-phase FIAs that trapped fluids of >50°C are older than 6.29 ± 0.30 Ma. Two-phase FIAs in paragenetically later calcite, which formed from fluids of 35 to 45°C, are older than 5.32 ± 0.02 Ma. There is no evidence for trapping of fluids with elevated temperatures during the past 5.32 my. The youngest Mg-enriched calcite intergrown with opal began to precipitate between about 1.9 to 2.9 Ma and has continued to precipitate within the past half million years. The presence of liquid-only inclusions and the consistent occurrence of Mg-enriched calcite and opal as the youngest event indicate a minor, but chemically distinct, ambient temperature (<35°C) fluid flux during the past 2 to 3 my.  相似文献   

14.
The 1.27 Ga old Ivigtut (Ivittuut) intrusion in South Greenland is world-famous for its hydrothermal cryolite deposit [Na3AlF6] situated within a strongly metasomatised A-type granite stock. This detailed fluid inclusion study characterises the fluid present during the formation of the cryolite deposit and thermodynamic modelling allows to constrain its formation conditions.Microthermometry revealed three different types of inclusions: (1) pure CO2, (2) aqueous-carbonic and (3) saline-aqueous inclusions. Melting temperatures range between − 23 and − 15 °C for type 2 and from − 15 to − 10 °C for type 3 inclusions. Most inclusions homogenise between 110 and 150 °C into the liquid.Stable isotope compositions of CO2 and H2O were measured from crushed inclusions in quartz, cryolite, fluorite and siderite. The δ13C values of about − 5‰ PDB are typical of mantle-derived magmas. The differences between δ18O of CO2 (+ 21 to + 42‰ VSMOW) and δ18O of H2O (− 1 to − 21.7‰ VSMOW) suggest low-temperature isotope exchange. δD (H2O) ranges from − 19 to − 144‰ VSMOW. The isotopic composition of inclusion water closely follows the meteoric water line and is comparable to Canadian Shield brines. Ion chromatography revealed the fluid's predominance in Na, Cl and F. Cl/Br ratios range between 56 and 110 and may imply intensive fluid–rock interaction with the host granite.Isochores deduced from microthermometry in conjunction with estimates for the solidification of the Ivigtut granite suggest a formation pressure of approximately 1–1.5 kbar for the fluid inclusions. Formation temperatures of different types of fluid inclusions vary between 100 and 400 °C. Thermodynamic modelling of phase assemblages and the extraordinary high concentration in F (and Na) may indicate that the cryolite body and its associated fluid inclusions could have formed during the continuous transition from a volatile-rich melt to a solute-rich fluid.  相似文献   

15.
The Jinman Cu deposit is hosted in sandstones and slates of the Jurassic Huakaizuo Formation in the Mesozoic to Cenozoic Lanping basin in western Yunnan, China. Despite the fact that Cu mineralization occurs mainly in quartz–carbonate veins controlled by faults and fractures, the Jinman deposit was classified as a sediment-hosted stratiform Cu deposit, mainly because it is hosted in a sedimentary basin characterized by abundant red beds with many stratiform Cu deposits. A detailed petrographic and microthermometric study of fluid inclusions from the Jinman deposit reveals the presence of abundant CO2-rich fluid inclusions, together with aqueous inclusions. The CO2-rich inclusions have CO2 melting temperatures mainly from −58.0°C to −56.6°C, homogenization temperatures of the carbonic phase (mostly into the liquid phase) mainly between 22°C and 30°C, clathrate melting temperatures from 1.8°C to 9.2°C, with corresponding salinities from 1.6 to 13.4 wt.% NaCl equivalent, and total homogenization temperatures from 226°C to 330°C. The aqueous inclusions have first melting temperatures from −60°C to −52°C, ice melting temperatures from −41.4°C to −2.3°C, with salinities from 3.9 to 29.0 wt.% NaCl equivalent, and total homogenization temperatures mainly from 140°C to 250°C. These fluid inclusion characteristics are comparable to those of orogenic or magmatic mineralization systems and are uncharacteristic of basinal mineralization systems, suggesting that it is inappropriate to classify the Jinman deposit as a sediment-hosted stratiform Cu deposit. The results of this study, together with geochemical data reported previously, suggest that the Jinman deposit formed in a hydrothermal system that involved both extra-basinal, deeply sourced CO2-rich fluid and basinal, aqueous fluid.  相似文献   

16.
The Sungun porphyry copper deposit is hosted in a Diorite/granodioritic to quartz-monzonitic stock that intruded Eocene volcanosedimentary and Cretaceous carbonate rocks. Copper mineralization is associated mainly with potassic alteration and to a lesser extent with sericitic alteration. Based on previously published fluid inclusion and isotopic data by Hezarkhani and Williams-Jones most of the copper is interpreted to have deposited during the waning stages of orthomagmatic hydrothermal activity at temperatures of 400 to 300 °C. These data also indicate that the hydrothermal system involved meteoric waters, and boiled extensively. In this work, thermodynamic data are used to delineate the stability fields of alteration and ore assemblages as a function of fS2, fO2 and pH. The solubility of chalcopyrite was evaluated in this range of conditions using recently published experimental data. During early potassic alteration (>450 °C), Copper solubility is calculated to have been >50 000 ppm, whereas the copper content of the initial fluid responsible for ore deposition is estimated, from fluid inclusion data, to have been 1200–3800 ppm. This indicates that initially the fluid was highly undersaturated with respect to chalcopyrite, which agrees with the observation that veins formed at T > 400 °C contain molybdenite but rarely chalcopyrite. Copper solubility drops rapidly with decreasing temperature, and at 400 °C is approximately 1000 ppm, within the range estimated from fluid inclusion data, whereas at 350 °C it is only 25 ppm. These calculations are consistent with observations that the bulk of the chalcopyrite deposited at Sungun is hosted by veins formed at temperatures of 360 ± 60 °C. Other factors that, in principle, may reduce chalcopyrite solubility are increases in pH, and decreases in fO2 and aCl−. Our analysis shows, however, that most of the change in pH occurred at high temperature when chalcopyrite was grossly undersaturated in the fluid, and that the direction of change in fO2 increased chalcopyrite solubility. We propose that the Sungun deposit formed mainly in response to the sharp temperature decrease that accompanied boiling, and partly as a result of the additional heat loss and decrease in aCl−, which occurred as a result of mixing of acidic Cu-bearing magmatic waters with cooler meteoric waters of lower salinity. Received: 8 July 1998 / Accepted: 8 April 1999  相似文献   

17.
The Pemali tin deposit is located in a Triassic granite pluton the magmatic evolution of which is characterized by a decrease of compatible Ca, Mg, Ti, P and Zr in the sequence: medium- to coarse-grained biotite granite, megacrystic medium-grained biotite granite, two-mica granite/muscovite granite. The tin mineralization is confined to the two-mica granite and consists of disseminated cassiterite as well as greisen-bordered veins. The highly evolved muscovite granite is tin-barren and is distinguished from the two-mica granite by its low mica content and low loss-on-ignition values. The fluid inclusions in quartz and fluorite of the two-mica granite and of the greisen homogenize in the 115–410 °C temperature range; the salinities are in the range of 0.4–23 equiv wt% NaCl and the CO2 concentrations are < 2 mole%.  相似文献   

18.
Gold ore-forming fluids of the Tanami region, Northern Australia   总被引：1，自引：0，他引：1  
Fluid inclusion studies have been carried out on major gold deposits and prospects in the Tanami region to determine the compositions of the associated fluids and the processes responsible for gold mineralization. Pre-ore, milky quartz veins contain only two-phase aqueous inclusions with salinities ≤19 wt% NaCl eq. and homogenization temperatures that range from 110 to 410°C. In contrast, the ore-bearing veins typically contain low to moderate salinity (<14 wt% NaCl eq.), H2O + CO2 ± CH4 ± N2-bearing fluids. The CO2-bearing inclusions coexist with two-phase aqueous inclusions that exhibit a wider range of salinities (≤21 wt% NaCl eq.). Post-ore quartz and carbonate veins contain mainly two-phase aqueous inclusions, with a last generation of aqueous inclusions being very CaCl2-rich. Salinities range from 7 to 33 wt% NaCl eq. and homogenization temperatures vary from 62 to 312°C. Gold deposits in the Tanami region are hosted by carbonaceous or iron-rich sedimentary rocks and/or mafic rocks. They formed over a range of depths at temperatures from 200 to 430°C. The Groundrush deposit formed at the greatest temperatures and depths (260–430°C and ≤11 km), whereas deposits in the Tanami goldfield formed at the lowest temperatures (≥200°C) and at the shallowest depths (1.5–5.6 km). There is also evidence in the Tanami goldfield for late-stage isothermal mixing with higher salinity (≤21 wt% NaCl eq.) fluids at temperatures between 100 and 200°C. Other deposits (e.g., The Granites, Callie, and Coyote) formed at intermediate depths and at temperatures ranging from 240 to 360°C. All ore fluids contained CO2 ± N2 ± CH4, with the more deeply formed deposits being enriched in CH4 and higher level deposits being enriched in CO2. Fluids from deposits hosted mainly by sedimentary rocks generally contained appreciable quantities of N2. The one exception is the Tanami goldfield, where the quartz veins were dominated by aqueous inclusions with rare CO2-bearing inclusions. Calculated δ 18O values for the ore fluids range from 3.8 to 8.5‰ and the corresponding δD values range from −89 to −37‰. Measured δ 13C values from CO2 extracted from fluid inclusions ranged from −5.1 to −8.4‰. These data indicate a magmatic or mixed magmatic/metamorphic source for the ore fluids in the Tanami region. Interpretation of the fluid inclusion, alteration, and structural data suggests that mineralization may have occurred via a number of processes. Gold occurs in veins associated with brittle fracturing and other dilational structures, but in the larger deposits, there is also an association with iron-rich rocks or carbonaceous sediments, suggesting that both structural and chemical controls are important. The major mineralization process appears to be boiling/effervescence of a gas-rich fluid, which leads to partitioning of H2S into the vapor phase resulting in gold precipitation. However, some deposits also show evidence of desulfidation by fluid–rock interaction and/or reduction of the ore-fluid by fluid mixing. These latter processes are generally more prevalent in the higher crustal-level deposits.  相似文献   

19.
Abstract. The Yuryang gold deposit, comprising a Te‐bearing Au‐Ag vein mineralization, is located in the Cheonan area of the Republic of Korea. The deposit is hosted in Precambrian gneiss and closely related to pegmatite. The mineralized veins display massive quartz textures, with weak alteration adjacent to the veins. The ore mineralization is simple, with a low Ag/Au ratio of 1.5:1, due to the paucity of Ag‐phases. Ore mineralization took place in two different mineral assemblages with paragenetic time; early Fe‐sulfide mineralization and late Fe‐sulfide and Au‐Te mineralization. The early Fe‐sulfide mineralization (pyrite + sphalerite) occurred typically along the vein margins, and the subsequent Au‐Te mineralization is characterized by fracture fillings of galena, sphalerite, pyrrhotite, Te‐bearing minerals (petzite, altaite, hessite and Bi‐Te mineral) and electrum. Fluid inclusions characteristically contain CO2 and can be classified into four types (Ia, Ib, IIa and IIb) according to the phase behavior. The pressure corrected temperatures (≥500d?C) indicate that the deposit was formed at a distinctively high temperature from fluids with moderate to low salinity (<12 wt% equiv. NaCl) and CH4 (1?22 mole %). The sphalerite geo‐barometry yield an estimated pressure about 3.5 ?2.1 kbar. The dominant ore‐deposition mechanisms were CO2 effervescence and concomitant H2S volatilization, which triggered sulfidation and gold mineralization. The measured and calculated isotopic compositions of fluids (δ18OH2O = 10.3 to 12.4 %o; δDH2O = ‐52 to ‐77 %o) may indicate that the gold deposition originated from S‐type magmatic waters. The physicochemical conditions observed in the Yuryang gold deposit indicate that the Jurassic gold deposits in the Cheonan area, including the Yuryang gold deposit are compatible with deposition of the intrusion‐related Au‐Te veins from deeply sourced fluids generated by the late Jurassic Daebo magmatism.  相似文献   

20.
安徽桂林郑钼钨矿床位于江南钨矿带北部,是目前区内唯一钼储量达到大型的钼钨矿床。本文在对该矿床地质特征和已有成果总结基础上,详细观察了各代表性矿化蚀变样品的岩相学特征,提出该矿床具镁质矽卡岩矿床特征,是桂林郑花岗斑岩熔体与奥陶系白云质灰岩地层交代的产物。矿石类型可分为靠近岩体(100m)浸染状矿石和远离岩体( 100m)的条带状矿石,分别赋存在接触交代矽卡岩和层控矽卡岩中。桂林郑矿床的矿石矿物为富钼白钨矿(钼钙矿-白钨矿系列),可分为三个世代,分别形成于无水矽卡岩阶段(Sch-Ⅰ)和含水矽卡岩-氧化物阶段(Sch-Ⅱ和Sch-Ⅲ),辉钼矿仅在浸染状矿石富钼白钨矿(Sch-Ⅲ)边部少量发育。不同矿石类型、不同世代富钼白钨矿的电子探针成分分析显示,富钼白钨矿的钼含量(MoO_3%)在5.75%～71.02%之间,均值为46.00%(n=224),总体具有超常富钼的特点;从无水矽卡岩阶段到含水矽卡岩-氧化物阶段(早→晚)、从浅部的条带状矿石到深部的浸染状矿石(浅→深),富钼白钨矿MoO_3含量有降低趋势。桂林郑钼钨矿床是首个以富钼白钨矿为主要矿石矿物的钼-多金属矿床,这一特殊钼钨矿床的发现深化了矽卡岩钼钨矿床的成因认识,同时对江南钨矿带内区域成矿规律与找矿勘探工作的推进提供了依据。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号