共查询到20条相似文献，搜索用时 187 毫秒
1.
《International Geology Review》2012,54(14):1635-1648
The Koushk zinc–lead deposit in the central part of the Zarigan–Chahmir basin, central Iran, is the largest of several sedimentary–exhalative (SEDEX) deposits in this basin, including the Chahmir, Zarigan, and Darreh-Dehu deposits. The host-rock sequence consists of carbonaceous, fine-grained black siltstone with interlayered rhyolitic tuffs. It corresponds to the upper part of the Lower Cambrian volcano-sedimentary sequence that was deposited on the Posht-e-Badam Block due to back-arc rifting of the continental margin of the Central Iranian Microcontinent. This block includes the late Neoproterozoic metamorphic basement of the Iran plate, overlain by rocks dating from the Early Cambrian to the Mesozoic. Based on ore body structure, mineralogy, and ore fabric, we recognize four different ore facies in the Koushk deposit: (1) a stockwork/feeder zone, consisting of a discordant mineralization of sulphides forming a stockwork of sulphide-bearing dolomite (quartz) veins cutting the footwall sedimentary rocks; (2) a massive ore/vent complex, consisting of massive replacement pyrite, galena, and sphalerite with minor arsenopyrite and chalcopyrite; (3) bedded ore, with laminated to disseminated pyrite, sphalerite, and galena; and (4) a distal facies, with minor disseminated and laminated pyrite, banded cherts, and disseminated barite. Carbonatization and sericitization are the main wall-rock alterations; alteration intensity increases towards the feeder zone. The δ34S composition of pyrite, sphalerite, and galena ranges from?+6.5 to?+36.7‰. The highest δ34S values correspond to bedded ore (+23.8 to?+36.7‰) and the lowest to massive ore (+6.5 to?+?17.8‰). The overall range of δ34S is remarkably higher than typical magmatic values, suggesting that sulphides formed from the reduction of seawater sulphate by bacteriogenic sulphate reduction in a closed or semi-closed system in the bedded ore, whereas thermochemical sulphate reduction likely played an important role in the feeder zone. Sulphur isotopes, along with sedimentological, textural, mineralogical, and geochemical evidences, suggest that this deposit should be classified as a vent-proximal SEDEX ore deposit. 相似文献
2.
Geoffrey P. Glasby Irina A. Prozherova Valery V. Maslennikov Sergey I. Petukhov 《Resource Geology》2007,57(1):24-36
The Jusa and Barsuchi Log volcanogenic massive sulfide (VMS) deposits formed along a paleo island arc in the east Magnitogrosk zone of the Southern Urals between ca 398 and 390 Ma. By analogy with the VMS deposits of the west Magnitogrosk zone, they are considered to be Baimak type deposits, which are Zn‐Cu‐Ba deposits containing Au, Ag and minor Pb. Detailed mapping and textural analysis of the two deposits shows that they formed as submarine hydrothermal mounds which were subsequently destroyed on the sea floor under the influence of ocean bottom currents and slumping. Both deposits display a ratio of the length to the maximum width of the deposit >15 and are characterized by ribbon‐like layers composed mainly of bedded ore and consisting principally of altered fine clastic ore facies. The Jusa deposit appears to have formed in two stages: deposition of colloform pyrite followed by deposition of copper–zinc–lead sulfides characterized by the close association of pyrite, chalcopyrite, sphalerite, galena, tennantite, arsenopyrite, marcasite, pyrrhotite, bornite, native gold and electrum and high concentrations of gold and silver. The low metamorphic grade of the east Magnitogorsk zone accounts for the exceptional degree of preservation of these deposits. 相似文献
3.
The Ortaklar VMS deposit is hosted in the Koçali Complex consisting of basalts and deep sea pelagic sediments, which formed by rifting and continental break-up of the southern Neotethyan in Late Triassic. The basalts are of NMORB-type without notable crustal contamination. From the surface to depth, the Ortaklar deposit consists of a gossan zone, a thick massive ore zone and a poorly developed stockwork zone. Primary mineralisation is characterised by distinctive facies including sulphide breccias (proximal), graded beds (distal), stockworks and chimney fragments. Ore mineral abundances decrease in the order of pyrite, magnetite, chalcopyrite, and sphalerite. Two distinct phases of mineralisation, massive magnetite and massive sulphide, are present in the Ortaklar deposit. Textural evidence (e.g., magnetite replacing sulphides) and the spatial relationships with the host rocks indicate that magnetite and sulphide minerals were generated in different stages. The transition from sulphide to magnetite mineralisation is interpreted to relate to variation in H2S content of ore fluids. The 1st stage massive sulphide ore might have formed by early hydrothermal fluids rich in Fe and H2S. The 2nd stage massive magnetite might have formed by later neutral hydrothermal fluids rich in Fe but poor in H2S, replacing the pre-existing sulphide ore.The alteration patterns, mineral paragenesis, lithological features (massive ore-stockwork ore-gossan) of the Ortaklar deposit together with its trace elements, Cu-Pb-Zn-Au-Ag and REE signatures are all consistent with a Cyprus-type VMS system. The δ34S values in pyrite and chalcopyrite samples range from 2.6 to 5.7‰, indicating that the hydrothermal fluids were associated with sub-seafloor igneous activity, typical of Cyprus-type VMS deposits. However, magnetite formed later than sulphide minerals in the Ortaklar deposit, contrasting with typical Cyprus-type VMS deposits where magnetite generally occurs in lower sections. Consequently, although the Ortaklar deposit generally conforms to Cyprus-type deposits, it is distinguished from them by its late stage and high magnetite concentration. Thus, the Ortaklar deposit is thought to be an exceptional and perhaps unique Cyprus-type VMS deposit. 相似文献
4.
The Chahmir zinc–lead deposit (1.5 Mt @ 6 % Zn + 2 % Pb) in Central Iran is one among several sedimentary-exhalative Zn–Pb deposits in the Early Cambrian Zarigan–Chahmir basin (e.g., Koushk, Darreh-Dehu, and Zarigan). The deposit is hosted by carbonaceous, fine-grained black siltstones, and shales interlayered with volcaniclastic sandstone beds. It corresponds to the upper part of the Early Cambrian volcano-sedimentary sequence (ECVSS), which was deposited on the Posht-e-Badam Block during back-arc rifting of the continental margin of Central Iran. Based on crosscutting relationships, mineralogy, and texture of sulfide mineralization, four different facies can be distinguished: stockwork (feeder zone), massive ore, bedded ore, and distal facies (exhalites with barite). Silicification, carbonatization, sericitization, and chloritization are the main wall-rock alteration styles; alteration intensity increases toward the proximal feeder zone. Fluid inclusion microthermometry was carried out on quartz associated with sulfides of the massive ore. Homogenization temperatures are in the range of 170–226 °C, and salinity is around 9 wt% NaCl eq. The size distribution of pyrite framboids of the bedded ore facies suggests anoxic to locally suboxic event for the host basin. δ34S(V-CDT) values of pyrite, sphalerite, and galena range from +10.9 to +29.8?‰. The highest δ34S values correspond to the bedded ore (+28.6 to +29.8?‰), and the lowest to the massive ore (+10.9 to +14.7?‰) and the feeder zone (+11.3 and +12.1?‰). The overall range of δ34S is consistent with a sedimentary environment where sulfide sulfur was derived from two sources. One of them was corresponding to early ore-stage sulfides in bedded ore and distal facies, consistent with bacterial reduction from coeval seawater sulfate in a closed or semiclosed basin. However, the δ34S values of late ore-stage sulfides, observed mainly in massive ore, interpreted as a hydrothermal sulfur component, leached from the lower part of the ECVSS. Sulfur isotopes, along with the sedimentological, textural, mineralogical, fluid inclusion, and geochemical characteristics of the Chahmir deposit are in agreement with a vent-proximal (Selwyn type) SEDEX ore deposit model. 相似文献
5.
The Karchiga copper massive sulfide deposit is located in the Kurchum block of high-grade metamorphosed rocks. This block is part of the Irtysh shear zone, which belongs to the largest transregional fault in Central Asia. The deposit is associated with the gneiss–amphibolite middle unit of the metamorphic complex, which is distinct in the geochemical fields. The mineralization is spatially and paragenetically related to the amphibolite beds, which are ore-bearing together with terrigenous rocks.The deposit contains two spatially isolated lodes, in which all the discovered commercial reserves concentrate. They conformably overlie the host rocks and are tabular or ribbonlike. The mineralization has a close spatial relationship with Mg-rich anthophyllite-containing rocks. The sulfide ores are disseminated or massive and comprise pyrite, chalcopyrite, pyrrhotite, sphalerite, and magnetite. The ore is of Zn–Cu composition, in which Cu dominates considerably over Zn (average contents 2 and 0.4%, respectively; Cu/(Cu + Zn) = 0.83). The ores are rich in Co (up to 0.16%, averaging 0.02%), poor in Au and Ag (0.3 and 7.2 ppm, respectively), and almost free of Pb and Ba.All the rocks and ores experienced epidote–amphibolitic metamorphism. Meanwhile, the ores experienced a recrystallization and partial regeneration, but the initial shape of the lodes remained unchanged.The essentially chalcopyritic ores, the volcaniclastic ore-bearing rocks, and the spatial and genetic relationship of the mineralization with undifferentiated mafic and siliciclastic rocks suggest that this deposit belongs to the Besshi type, formed in a back-arc environment, near large rises.The studies show that Besshi-type Cu–Zn massive sulfide deposits differ from most of the polymetallic (Kuroko-type) deposits in Rudny Altai in the composition of volcanics and geodynamic settings, but belong to the same evolutionary series in this VMS province. Both types of deposits might have formed in the Paleozoic, during the main peak of VMS generation in the Earth's history. 相似文献
6.
Abstract. The Takara volcanogenic massive sulfide (VMS) deposit occurs in Miocene formation of the Misaka Mountain, the South Fossa Magna region, central Japan. The tectonic setting of the Misaka Mountain is reconstructed to be a part of the paleo Izu-Ogasawara arc which collided with the Honshu arc and to form accreted body in the present position. The Takara deposit, therefore, is considered to have formed in the paleo Izu-Ogasawara arc.
The ores from the Takara deposit are classified into pyrite-type ore, chalcopyrite-type ore, and sphalerite-type ore on the basis of chemical composition and their mineral assemblages. Some pyrite-type ores are characterized by their high Au content. The Au content is hardly recognized in the chalcopyrite-type and sphalerite-type ores.
The ores from the Takara deposit have intermediate bulk chemical composition between those from the Besshi-type deposits and the Kuroko-type deposits that are two representative VMS deposits. However, the bulk chemical composition is closer to that from the Kuroko-type deposits. And moreover, chemical composition of tetrahedrite-tennantite series minerals (tetrahedrite) is similar to that from the Kuroko-type deposits. The bulk chemical composition (Cu, Zn, Co, Pb, and As contents) of ores is affected by the chemical composition of volcanic rocks associated with VMS deposits. 相似文献
The ores from the Takara deposit are classified into pyrite-type ore, chalcopyrite-type ore, and sphalerite-type ore on the basis of chemical composition and their mineral assemblages. Some pyrite-type ores are characterized by their high Au content. The Au content is hardly recognized in the chalcopyrite-type and sphalerite-type ores.
The ores from the Takara deposit have intermediate bulk chemical composition between those from the Besshi-type deposits and the Kuroko-type deposits that are two representative VMS deposits. However, the bulk chemical composition is closer to that from the Kuroko-type deposits. And moreover, chemical composition of tetrahedrite-tennantite series minerals (tetrahedrite) is similar to that from the Kuroko-type deposits. The bulk chemical composition (Cu, Zn, Co, Pb, and As contents) of ores is affected by the chemical composition of volcanic rocks associated with VMS deposits. 相似文献
7.
锡铁山矿床两类喷流沉积成因的铅锌矿体研究 总被引：9，自引：0，他引：9
锡铁山大型铅锌矿床发育有非层状和层状两种类型的铅锌矿体,通过对两类矿体产出地质条件与地球化学特征的研究,发现非层状矿体分布于代表喷口系统的网脉状蚀变带的上方附近,其中发育有大量的热水爆破角砾岩,而层状矿体分布于远离喷口的外侧,属于远端沉积的产物。两者具有相同的矿物组合和成矿元素组合,自非层状矿体→层状矿体,矿石品位下降,Zn/Pb比值增高,黄铁矿相对含量增加。揭示出非层状矿体不是层状矿体后期改造的产物,而是形成于喷流作用阶段。考虑到锡铁山矿床中规模巨大的喷口系统以及厚层状的喷流成因大理岩,推断锡铁山矿床及周边地区还有巨大的找矿潜力,找矿重点是层状铅锌矿床(体)。 相似文献
8.
The Ashele Deposit: A Recently Discovered Volcanogenic Massive Sulfide Cu-Zn Deposit in Xinjiang, China 总被引：1，自引：0，他引：1
Abstract: The Ashele Cu-Zn deposit is a recently discovered volcanogenic massive sulfide deposit in Xinjiang, Northwestern China. It is the largest Cu-Zn deposit in this type of deposits in China, which were formed in the early period of later Palaeozoic Era. This deposit is hosted within a suit of bimodal submarine volcanic rocks of the Ashele Formation of Lower-Middle Devonian System formed in an environment of paleocontinental margin rift setting. Lensoid orebodies occur between spilitic rocks developed at footwall and quartz-keratophyric tuff at hanging wall. Zonation of metal elements in the Ashele mine is one of typical volcanic-related exhalative Cu-Zn sulfide deposits in the world. Black ores enriched in Pb, Zn and Ag occurs on the top of the No. 1 orebody in the Ashele deposit, yellow ores enriched in Cu in the middle part, and the chalcopyritization stringer below the massive sulfide ores. Zonation of ore-structure in the No. 1 orebody is also apparent and corresponds to the zoning of elements, i. e. lamellar and/or banded sulfide-sulfate ores on the top, massive sulfide ores in the middle, and stockwork veinlets associated with altered breccia pipe on the bottom. Four epochs of mineralization in the Ashele deposit has been recognized. The first period of syngenetic-exhalative deposition of sulfides is the main epoch of mineralization, and the ores deposited subsequently subjected to thermo-metamorphism at the second epoch, superimposed by hydrothermal mineralization at the third epoch, and weathered or oxidized at the fourth epoch.
More than 100 categories of minerals have been recognized in the Ashele mine, but only pyrite, chalcopyrite, sphalerite, tetrahedrite, galena, barite, quartz, chlorite, sericite, and calcite are dominant, making up various types of ores, and alteration pipes or horizons. Studies of ore petrology suggest that the massive ores were volcanogenic and deposited by exhalative process. 相似文献
More than 100 categories of minerals have been recognized in the Ashele mine, but only pyrite, chalcopyrite, sphalerite, tetrahedrite, galena, barite, quartz, chlorite, sericite, and calcite are dominant, making up various types of ores, and alteration pipes or horizons. Studies of ore petrology suggest that the massive ores were volcanogenic and deposited by exhalative process. 相似文献
9.
The large Gacun silver–lead–zinc–copper deposit in Sichuan Province is one of the largest volcanogenic massive sulfide(VMS) deposits in China. The deposit consists of western and central ore bodies, which form a vein–stockwork mineralization system corresponding to hydrothermal channels, and eastern ore bodies, which form an exhalative chemical sedimentary system derived from a brine pool in a submarine basin. The Youre lead–zinc deposit, which is currently under exploration and lies adjacent to the southern part of the Gacun deposit, is characterized by intense silicification and vein–stockwork structures and consists of massive silicified rhyolitic volcanics, banded rhyolitic tuff, and phyllitic sericite tuff. From a comparison of their ore-bearing horizons, the Gacun and Youre deposits have a continuous and stable hanging wall(calcareous slate and overlying andesite) and foot wall(rhyolite–dacite breccia and agglomerate), and the lithologic sequence includes lower intermediate to felsic rocks and upper felsic rocks. Thus, the Youre deposit, which comprises relatively thinly layered low–grade ore, is regarded as forming a southward extension of the Gacun deposit. A further comparison of the structures of the ore-bearing belts between the two deposits suggests that the Youre ore bodies are similar to the western ore bodies of the Gacun deposit. Moreover, the characteristics of fluid inclusions and stable isotopes in the Youre deposit are also similar to those of the western ore bodies of the Gacun deposit. Genetic models of the deposits are proposed for the Gacun–Youre ore district, and massive concealed ore bodies may occcur in the Youre deposit at depths that are similar to those of the eastern ore bodies of the Gacun deposit. 相似文献
10.
Qingdong ZENG Jianming LIU Zuolun ZHANG Weiqing ZHANG Shaoxiong CHU Song ZHANG Zaicong WANG Xiaoxia DUAN 《Resource Geology》2011,61(3):241-258
The Chehugou Mo–Cu deposit, located 56 km west of Chifeng, NE China, is hosted by Triassic granite porphyry. Molybdenite–chalcopyrite mineralization of the deposit mainly occurs as veinlets in stockwork ore and dissemination in breccia ore, and two ore‐bearing quartz veins crop out to the south of the granite porphyry stock. Based on crosscutting relationships and mineral paragenesis, three hydrothermal stages are identified: (i) quartz–pyrite–molybdenite ± chalcopyrite stage; (ii) pyrite–quartz ± sphalerite stage; and (iii) quartz–calcite ± pyrite ± fluorite stage. Three types of fluid inclusions in the stockwork and breccia ore are recognized: LV, two‐phase aqueous inclusions (liquid‐rich); LVS, three‐phase liquid, vapor, and salt daughter crystal inclusions; and VL, two‐phase aqueous inclusions (gas‐rich). LV and LVS fluid inclusions are recognized in vein ore. Microthermometric investigation of the three types of fluid inclusions in hydrothermal quartz from the stockwork, breccia, and vein ores shows salinities from 1.57 to 66.75 wt% NaCl equivalents, with homogenization temperatures varying from 114°C to 550°C. The temperature changed from 282–550°C, 220–318°C to 114–243°C from the first stage to the third stage. The homogenization temperatures and salinity of the LV, LVS and VL inclusions are 114–442°C and 1.57–14.25 wt% NaCl equivalent, 301–550°C and 31.01–66.75 wt% NaCl equivalent, 286–420°C and 4.65–11.1 wt% NaCl equivalent, respectively. The VL inclusions coexist with the LV and LVS, which homogenize at the similar temperature. The above evidence shows that fluid‐boiling occurred in the ore‐forming stage. δ34S values of sulfide from three type ores change from ?0.61‰ to 0.86‰. These δ34S values of sulfide are similar to δ34S values of typical magmatic sulfide sulfur (c. 0‰), suggesting that ore‐forming materials are magmatic in origin. 相似文献
11.
A geochemical rock- and soil-sampling program was carried out in the vicinity of eight concealed “Cyprus type” deposits, occurring in marginal mafic to intermediate metapillow lavas of the Troodos Ophiolite Complex. The mineralization of massive and stockwork sulfide ore is characterized by the predominance of pyrite, intergrown with less chalcopyrite and minor amounts of sphalerite.Background values of Hg are in the range of 8–12 ppb for soils and 3–6 ppb for surface rocks. Anomaly/background ratios of 10:1 (soils) and 5:1 (rocks) have been found only, where Hg migrated along channels formed by faults cutting shallow-seated mineralization. Here, Hg sometimes shows significant correlations with Cu, Zn, Ba and exceptionally with Co. However in one case an Hg anomaly in soils and surface rocks was detected directly over a deposit. The use of Hg as indicator element for these types of deposits is therefore limited. Buried mineralization may be delineated more distinctly by Cu, Zn and Ba. 相似文献
12.
In unaltered volcanogenic massive sulfide (VMS) ore deposits, variable Rb/Sr ratios in the ore mineral permits application
of the Rb-Sr isotopic method to directly date the time of ore formation. In contrast, post-crystallization deformation and
metamorphism would open the system to metamorphic fluids that would alter elemental ratios. To test whether the Rb-Sr isotopic
systematics in the ore minerals had preserved the formation time in the ∼800 Ma metamorphosed VMS ores within the ∼1 Ga Ambaji-Sendra
arc terrain, Rajasthan, NW India, common sulfides, pyrite and sphalerite from the Pipela Cu-Zn prospect, were analyzed for
their geochemistry and Rb-Sr isotopic systematics. Trace and rare earth elements in these minerals are resident probably at
crystal defects, whereas all inclusions (including those from metamorphic fluids) were removed by a simple crush leach method.
Results of direct dating by the Rb-Sr method to the hydrothermal pyrite yielded an isochron age of 1025±76 Ma with an initial
Sr ratio of 0.7051±0.0006, similar to previously determined zircon U-Pb age of 987 Ma from associated rhyolites. This suggests
the applicability of the crush leach method to date formation time of metamorphosed pyrite ores. 相似文献
13.
内蒙古东升庙矿床岩浆热液叠加成矿作用——来自地质与矿物包裹体测温的证据 总被引：1，自引：0，他引：1
The Dongshengmiao Pb-Zn deposit located in the Mesoproterozoic aulacogen in a passive continental margin in the north- west margin of the North-China Craton is widely considered to be a untypical SEDEX deposit.Recently,new types of mineralization such as chalcopyrite veins and re-crystallized sphalerite ores with visible hydrothermal alteration have been found in the deposit at depth.In this paper we report the decrepitation temperatures of fluid inclusions in chalcopyrite,sphalerite and quartz from these new types of ores.The decrepitation temperatures of fluid inclusions in chalcopyrite(4 samples),sphalerite(2 samples)and quartz(5 samples)are 303～456℃,97～497℃,146～350℃and 350～556℃,respectively.The decrepitation temperatures of fluid inclusions in the vein-type chalcopyrite are similar to the decrepitation temperatures of fluid inclusions in chalcopyrite from the Hercynian Oubulage porphyry Cu-Au deposit(313～514℃)and the Chehugou porphyry Cu-Mo deposit(277～485℃),supporting our interpretation that the Dongshengmiao deposit was overprinted by magmatic hydrothermal mineralization.The decrepitation temperatures of fluid inclusions in re-crystallized sphalerite from the Dongshengmiao deposit are characterized by two peaks,97～358℃and 358～497℃.The decrepitation temperatures of fluid inclusions in quartz in ehalcopyrite veins from the Dongshengmiao deposit are also characterized by two peaks,146～350℃and 350～556℃.The lower and higher temperature peaks in both cases are considered to represent two separate mineralization events,original SEDEX mineralization and magmatic hydrothermal overprinting,respectively.The higher decrepitation temperatures of fluid inclusions in quartz and sphalerite from the Dongshengmiao deposit are similar to the decrepitation temperatures(340～526℃)of fluid inclusions in sphalerite from the Baiyinnuoer skarn-type Pb-Zn deposit in the region. Replacement of pyrite by sphalerite and overgrowth of chalcopyrite on pyrite in the Dongshengmiao support our interpretation that the original SEDEX mineralization was overprinted by magmatic hydrothermal activity in the deposit.Our results suggest that there may be separate porphyry and skarn-type deposits related to Hercynian magmatism and associated hydrothermal activities in the Langshan area, which are potential exploration targets in the future. 相似文献
14.
The volcanogenic massive sulfide deposit of Filon Norte at Tharsis is hosted by carbonaceous black slate and connected only partly with stockwork veins. The massive ores are usually composed of fine-grained pyrite with subordinate amounts of sphalerite, chalcopyrite, galena and arsenopyrite. Monoclinic pyrrhotite sometimes occurs in massive pyritic ores in the apparently middle and upper horizons of the orebody, and siderite-rich ores are interstratified with compact pyritic ores in the apparently lower horizons. From the occurrence of monoclinic pyrrhotite, together with the FeS contents of sphalerite mostly ranging from 11 to 16 mol %, it is inferred that the sulfide minerals of the massive orebody were precipitated in euxinic muds on the sea-floor at temperatures below 250°C. The negatively shifted, highly variable
34S values of the massive ores and their close similarity to those of the underlying black slates strongly suggest that the sulfide sulfur of the massive orebody and the slates is cognate and biogenic. 相似文献
15.
Tobias E. Bauer Pietari Skyttä Tobias Hermansson Rodney L. Allen Pär Weihed 《Mineralium Deposita》2014,49(5):555-573
The Skellefte district in northern Sweden is host to abundant volcanogenic massive sulphide (VMS) deposits comprising pyritic, massive, semi-massive and disseminated Zn–Cu–Au ± Pb ores surrounded by disseminated pyrite and with or without stockwork mineralisation. The VMS deposits are associated with Palaeoproterozoic upper crustal extension (D1) that resulted in the development of normal faults and related transfer faults. The VMS ores formed as sub-seafloor replacement in both felsic volcaniclastic and sedimentary rocks and partly as exhalative deposits within the uppermost part of the volcanic stratigraphy. Subsequently, the district was subjected to deformation (D2) during crustal shortening. Comparing the distribution of VMS deposits with the regional fault pattern reveals a close spatial relationship of VMS deposits to the faults that formed during crustal extension (D1) utilising the syn-extensional faults as fluid conduits. Analysing the shape and orientation of VMS ore bodies shows how their deformation pattern mimics those of the hosting structures and results from the overprinting D2 deformation. Furthermore, regional structural transitions are imitated in the deformation patterns of the ore bodies. Plotting the aspect ratios of VMS ore bodies and the comparison with undeformed equivalents in the Hokuroko district, Japan allow an estimation of apparent strain and show correlation with the D2 deformation intensity of the certain structural domains. A comparison of the size of VMS deposits with their location shows that the smallest deposits are not related to known high-strain zones and the largest deposits are associated with regional-scale high-strain zones. The comparison of distribution and size with the pattern of high-strain zones provides an important tool for regional-scale mineral exploration in the Skellefte district, whereas the analysis of ore body shape and orientation can aid near-mine exploration activities. 相似文献
16.
Akira Imai 《Resource Geology》2005,55(2):73-90
Abstract. Evolution of hydrothermal system from initial porphyry Cu mineralization to overlapping epithermal system at the Dizon porphyry Cu‐Au deposit in western central Luzon, Zambales, Philippines, is documented in terms of mineral paragen‐esis, fluid inclusion petrography and microthermometry, and sulfur isotope systematics. The paragenetic stages throughout the deposit are summarized as follows; 1) stockwork amethystic quartz veinlets associated with chalcopyrite, bornite, magnetite and Au enveloped by chlorite alteration overprinting biotite alteration, 2) stockwork quartz veinlets with chalcopyrite and pyrite associated with Au and chalcopyrite and pyrite stringers in sericite alteration, 3) stringer quartz veinlets associated with molybdenite in sericite alteration, and 4) WNW‐trending quartz veins associated with sphalerite and galena at deeper part, while enargite and stibnite at shallower levels associated with advanced argillic alteration. Chalcopyrite and bornite associated with magnetite in quartz veinlet stockwork (stage 1) have precipitated initially as intermediate solid solution (iss) and bornite solid solution (bnss), respectively. Fluid inclusions in the stockwork veinlet quartz consist of gas‐rich inclusions and polyphase inclusions. Halite in polyphase inclusions dissolves at temperatures ranging from 360d?C to >500d?C but liquid (brine) and gas (vapor) do not homogenize at <500d?C. The maximum pressure and minimum temperature during the deposition of iss and bnss with stockwork quartz veinlets are estimated to be 460 bars and 500d?C. Fluid inclusions in veinlet stockwork quartz enveloped in sericite alteration (stage 2) consist mainly of gas‐rich inclusions and polyphase inclusions. In addition to the possible presence of saturated NaCl crystals at the time of entrapment of fluid inclusions that exhibit the liquid‐vapor homogenization temperatures lower than the halite dissolution temperatures in some samples, wide range of temperatures of halite dissolution and liquid‐vapor homogenization of polyphase inclusions from 230d?C to >500d?C and from 270d?C to >500d?C, respectively, suggests heterogeneous entrapment of gaseous vapor and hypersaline brine. The minimum pressure and temperature are estimated to be about 25 bars and 245d?C. Fluid inclusions in veinlet quartz associated with molybdenite (stage 3) are dominated by gas‐rich inclusions accompanied with minor liquid‐rich inclusions that homogenize at temperatures between 350d?C and 490d?C. Fluid inclusions in vuggy veinlet quartz associated with stibnite (stage 4) consist mainly of gas‐rich inclusions with subordinate polyphase inclusions that do not homogenize below 500d?C. Fluid inclusions in veinlet quartz associated with galena and sphalerite (stage 4) are composed of liquid‐rich two‐phase inclusions, and they homogenize into liquid phase at temperatures ranging widely from 190d?C to 300d?C (suggesting boiling) and the salinity ranges from 1.0 wt% to 3.4 wt% NaCl equivalent. A pressure of about 15 bars is estimated for the dilute aqueous solution of 190d?C from which veinlet quartz associated with galena and sphalerite precipitated. In addition to a change in temperature‐pressure regime from lithostatic pressure during the deposition of iss and bnss with stockwork quartz veinlets to hydrostatic pressure during fracture‐controlled quartz veinlet associated with galena and sphalerite, a decrease in pressure is supposed to have occurred due to unroofing or removal of the overlying piles during the temperature decrease in the evolution of hydrothermal system. The majority of the sulfur isotopic composition of sulfides ranges from ±0 % to +5 %. Sulfur originated from an iso‐topically uniform and homogeneous source, and the mineralization occurred in a single hydrothermal system. 相似文献
17.
别子型矿床最早形成于古元古代,并在显生宙海沟环境或弧前盆地广泛发育,其成矿区域发育厚层沉积岩地层,覆盖在火山岩之上,对成矿流体物质交换和金属元素富集有重要意义。别子型块状硫化物矿床下盘发育强烈的黄铁绢英岩化,而上盘仅发育微弱的绿泥石化、碳酸盐化。矿床常呈单个矿体产出或2~3个矿体连生,剖面上,由下至上表现为枕状玄武岩→块状含铜黄铁矿矿石→块状、条带状燧石黄铁矿矿石→块状碧玉岩。别子型矿床的火山岩围岩多为钙碱性系列,少量拉斑系列,与活动大陆边缘的岛弧火山岩具有相似的微量和稀土元素地球化学特征。成矿流体中的硫为幔源硫和海水硫的混合来源,成矿元素来源为幔-壳混合源。 相似文献
18.
Zahra Badrzadeh Timothy J. Barrett Jan M. Peter Domingo Gimeno Mossaieb Sabzehei Mehraj Aghazadeh 《Mineralium Deposita》2011,46(8):905-923
The Sargaz Cu–Zn massive sulfide deposit is situated in the southeastern part of Kerman Province, in the southern Sanandaj–Sirjan Zone of Iran. The stratigraphic footwall of the Sargaz deposit is Upper Triassic to Lower Jurassic (?) pillowed basalt, whereas the stratigraphic hanging wall is andesite. Mafic volcanic rocks are overlain by andesitic volcaniclastics and volcanic breccias and locally by heterogeneous debris flows. Rhyodacitic flows and volcaniclastics overlie the sequence of basaltic and andesitic rocks. Based on the bimodal nature of volcanism, the regional geologic setting and petrochemistry of the volcanic rocks, we suggest massive sulfide mineralization in the Sargaz formed in a nascent ensialic back-arc basin. The current reserves (after ancient mining) of the Sargaz deposit are 3 Mt at 1.34% Cu, 0.38% Zn, 0.08%Pb, 0.24 g/t Au, and 7 g/t Ag. The structurally dismembered massive sulfide lens is zoned from a pyrite-rich base, to a pyrite?±?chalcopyrite-rich central part, and a sphalerite–chalcopyrite-rich upper part, with a sphalerite-rich zone lateral to the upper part. The main sulfide mineral is pyrite, with lesser chalcopyrite and sphalerite. The feeder zone, comprised of a vein stockwork consists of quartz–sulfide–sericite pesudobreccia and, in the deepest part, chlorite–quartz–pyrite pesudobreccia. Footwall hydrothermal alteration extends at least 70–80 m below the massive sulfide lens and more than a hundred meters along strike from the massive sulfide lens. Jasper and Fe–Mn bearing chert horizons lateral to the sulfide deposit represent low-temperature hydrothermal precipitates of the evolving hydrothermal system. Based on mineral textures and paragenetic relationships, the growth history of the Sargaz deposit is complex and includes: (1) early precipitation of sulfides (protore) on the seafloor as precipitation of fine-grained anhedral pyrite, sphalerite, quartz, and barite; (2) anhydrite precipitation in open spaces and mineral interstices within the sulfide mound followed by its subsequent dissolution, formation of breccia textures, and mound clasts and precipitation of coarse-grained pyrite, sphalerite, tetrahedrite–tennantite, galena and barite; (3) replacement of pre-existing sulfides by chalcopyrite precipitated at higher temperatures (zone refining); (4) continued “refining” led to the dissolution of stage 3 chalcopyrite and formation of a base-metal-depleted pyrite body in the lowermost part of the massive sulfide lens; (5) carbonate veins were emplaced into the sulfide lens, replacing stage 2 barite. The δ34S composition of the sulfides ranges from +2.8‰ to +8.5‰ (average, +5.6‰) with a general increase of δ34S ratios with depth within the massive sulfide lens and underlying stockwork zone. The heavier values indicate that some of the sulfur was derived from seawater sulfate that was ultimately thermochemically reduced in deep hydrothermal reaction zones. 相似文献
19.
海相火山-沉积建造铁铜矿床类型及地质特征 总被引：4，自引：1，他引：4
铁-铜型矿床产出的时代从元古宙到新生代均有，与其有关的火山岩大多数为中基性与中酸性或偏碱性岩石。作者以镜的山桦树沟、陇山陈家庙和陕西铜厂不同时代的铁-铜矿床为例，概述了该类型矿床的地质特征、成矿环境并着重探了铁-铜矿床的成因机制，认为该类型矿床是与火山作用有关的喷气-沉积型矿床，同时指出柳沟峡地区及其以西（东缰地区）铁-铜型铜矿化带的发现，是进一步寻找铁-铜-金矿床的有利地段。 相似文献
20.
Akira Imai Yukiko Ohbuchi Takayuki Tanaka Seiya Morita Kentaro Yasunaga 《Resource Geology》2007,57(4):374-385
The porphyry Cu deposits at Waisoi in Namosi district, Viti Levu are separated into two deposits: the Waisoi East deposit and the Waisoi West deposit. In the Waisoi East deposit, quartz porphyry is exposed and in the Waisoi West deposit, diorite porphyry is sporadically exposed in addition to a small body of quartz porphyry. The mineralization in the Waisoi East deposit is characterized by the bornite–chalcopyrite–pyrite assemblage associated with traces of molybdenite and native gold. Polyphase fluid inclusions in stockwork quartz veinlets show homogenization temperatures ranging from 210 to >500°C. The high‐grade Cu mineralization in the Waisoi West deposit is characterized by the bornite–chalcopyrite–pyrite assemblage accompanied with sheeted and stockwork quartz veinlets. Polyphase fluid inclusions occasionally containing hematite flakes in quartz veinlets in the center of the Waisoi West deposit homogenize at temperatures ranging from 450°C to >500°C. However, fluid inclusions in stockwork quartz veinlets in the periphery, homogenize at lower temperatures around 210°C. Both in the Waisoi East and Waisoi West deposits, primary bornite–chalcopyrite–pyrite assemblage in the high Cu‐grade zone was deposited at the upper stability limit of chalcopyrite with respect to sulfur fugacity. Thus, the principal Cu mineralization at the Waisoi deposits occurred at a relatively high sulfur fugacity, that is, in a high‐sulfidation environment. 相似文献