首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 341 毫秒
1.
Taking for example the Luobosa chromite deposit in Tibet combined with other deposits of the same type in the world, the paper discusses the genetic mechanism of podiform chromite deposits. The study indicates that chromite and dunite-harzburgite are both the products of different degrees of partial melting of the same primary pyrolite(spinel lherzolite) and that chromite and dunite are the end product of higher degree of partial melting.The melting mechanism lies in the convcrsion of the two subgroups of pyroxenes(Cpx and Opx) into olivine and spinel respectively as a result of their incongruent melting, accompanied by regulation and reformation of accessory chrome spinel and such rock-forming minerals as Ol, Opx and Cpx, thus resulting in the close association of chromite deposits and dunite. The results of this study are of general significance for understanding the genesis of chromite deposits of the same type in the world.  相似文献   

2.
Before intruding, primary magmas have undergone liquation and partial crystallization atdepth; as a result the magmas are partitioned into barren magma, ore-bearing magma, ore-richmagma and ore magma, which then ascend and are injected into the present locations once ormultiple times, thus forming ore deposits. The above-mentioned mineralizing process is knownas deep-seated magmatic liquation-injection mineralization. The volume of the barren magma isgenerally much larger than those of the ore-bearing magma, ore-rich magma and ore magma. Inthe ascending process, most of the barren magma intrudes into different locations or outpoursonto the ground surface, forming intrusions or lava flows. The rest barren magma, ore-bearingmagma, ore-rich magma and ore magma may either multiple times inject into the same space inwhich rocks and ores are formed or separately inject into different spaces in which rocks and oresare formed. The intrusions containing such deep-seated magmatic liquation-injection depositshave a much smaller volume, greater ore potential and higher ore grade than that of in-situmagmatic liquation deposits. Consequently this mineralizing process results in the formation oflarge deposits in small intrusions.  相似文献   

3.
Gold-silver deposits in the Atalla area occur as hydrothermal quartz veins in NE–SW pre-existing fractures within the Atalla granitic pluton. The orientation of such quartz veins has been attributed to extensional behavior related to the Atalla Shear Zone (ASZ). The Atalla area is covered by a variety of lithologies that are (from oldest to youngest): metasedimentary rocks, metavolcanic rocks, ophiolite assemblage (serpentinites/talc-carbonates), Atalla granite and Dokhan volcanic rocks. Microscopically, Atalla granite ranges in composition from granodiorite to monzogranite. Whole-rock geochemistry constrains the calc-alkaine affinity of the Atalla granite that was intruded within an orogenic (syn-collision) tectonic regime. The ore minerals are represented by gold/silver (electrum), pyrite (Py1 & Py2), arsenopyrite, pyrrhotite, sphalerite, chalcopyrite, galena, covellite and goethite. The temperature of ore formation ranges from 240 to 285°C and the estimated fluid pressure is in the range of 20–100 MPa. Based on the geological setting, ore textures and fluid characteristics; the Atalla Au-Ag deposits are considered to be orogenic in nature, formed from a continental collision (~653-590 Ma), synchronous with the emplacement of calc-alkaline magmatism during the evolutionary history of the Arabian Nubian Shield (ANS). The initial ore-forming fluid was primarily derived from a metamorphic source related to ophiolitic-serpentinite rocks under deep regional conditions of greenschist-amphibolite facies, where the Atalla granitic eruption provided the required temperature conditions for the metamorphic process to take place. Under such conditions, the transportation of ore metals as bisulfide complexes is favoured. The deposition of ore minerals was triggered by fluid-wallrock interaction through fracture pathways in conjunction with a temperature-pressure drop that is likely to have been related to uplift into the crustal levels.  相似文献   

4.
The main purpose of this paper is to present a fundamental concept of U-Pb isotopic spectrum-system and to apply this idea to the interpretation of the mechanism of uranium ore formation. It is evident from a number of examples of uranium deposits that the uranium deposits formed in various processes are characterized by different types of U-Pb isotopic spectrum-system.  相似文献   

5.
Geochemistry of Subvolcanic-Type Copper-Silver Deposits in Eastern China   总被引：1，自引：0，他引：1  
The metallogenesis of subvolcanic deposits is controlled by subvolcanic activities. The copper polymetallic deposits are genetically related to intermediate-acid rocks, and the silver polymetallic deposits are more closely related to acid rocks. The abundance of Cu is relatively high in the intermediate-acid rocks and subvolcanic rocks, whereas the abundances of Pb, An and Ag are high in acid rocks, indicating rich ore-forming elements in original magmas. The study of REEs shows that the magmatic type related to copper deposits is the syntectic type, and that related to silver polymetallic deposits is mainly the re-melting type. The deposits were formed under medium-low temperatures and low salinity. The metallogenic times were the late stage of the early Yanshanian or the late Yanshanian, dating 78-147 Ma.  相似文献   

6.
The Jinman copper deposit,which is situated on the northern margin of the Lanping-Simao back-arc basin,western Yunnan Province,is a silver-bearing,high-grade vein-type copper deposit.Comprehensive element geochemical studies of the host rocks and hydrothermal minerals revealed the regularities in the distribution,mobilization and transport of elements from the host rocks to hydrothermal minerals.In conjunction with the fluid inclusion and isotope data,it is suggested that the ore-forming fluid was derived mainly from a deep source characterized by CO2 enrichment and reduction in nature.It is also suggested that the oreforming materials come largely from a deep source.although the contribution of the country rocks should not be ruled out.It is also found that some hydrothermal minerals are possessed of MREE-enrichment patterns.It is deduced that the REEs in the deep-source ore fluid were transported in the form of CO3^2- complexes and were deposited in a continental basin(or a hot-spring basin).  相似文献   

7.
The origin of PGEeCueNi sulfide deposits of Norilsk and Talnakh located in the northwest flank of the Triassic basalt trap formation of Siberia is considered. It is shown that ore elements of these deposits (probably, except Fe) are derived from the crust rather than from the mantle. They entered the basalts owing to a remobilization (recycling) of ore elements from the Paleoproterozoic sediments and from the rocks of the Siberian platform’s basement. Prospecting criteria for similar deposits are as follows: (1) a presence of a large Paleoproterozoic aulacogen and a related magmatic sulfide CueNi mineralization; (2) a confinement of perspective areas to troughs associated with long-lived deep fault zones; (3) association with mobile orogenic belts, island-arc systems and tectonomagmatic activation zones; (4) temporal association with boundaries of global periods characterized by active processes of continental breakup and large-scale trap magmatism. A combination of several factors (the first one is obligatory) is favorable for the discovery of a large ore body.  相似文献   

8.
The Southern Great Xing'an Range(SGXR) hosts a number of Early Cretaceous Sn and associated metal deposits, which can be divided into three principal types according to their geological characteristics: skarn type deposits, porphyry type deposits and hydrothermal vein type deposits. Fluid inclusion assemblages of different types of deposits are quite different, which represent the complexities of metallogenic process and formation mechanism. CH_4 and CO_2 have been detected in fluid inclusions from some of deposits, indicating that the ore-forming fluids are affected by materials of Permian strata. Hydrogen and oxygen isotope data from ore minerals and associated gangue minerals indicate that the initial ore fluids were dominated by magmatic waters, some of which had clearly exchanged oxygen with wall rocks during their passage through the strata. The narrow range for the δ~(34)S values presumably reflects the corresponding uniformity of the ore forming fluids, and these δ~(34)S values have been interpreted to reflect magmatic sources for the sulfur. The comparation between lead isotope ratios of ore minerals and different geological units' also reveals that deeply seated magma has been a significant source of lead in the ores.  相似文献   

9.
  相似文献   

10.
Shear zone-hosted gold deposits in China can be divided into four types:ductile,brittle-ductile,ductile-brittle and brittle,of which the ductile and brittle types are the basic ones.All these types of gold deposits have their own geochemical characteristics.The Hetai gold deposit in Guangdong Province,for example,is a mylonite-type gold deposit in a ductile shear zone.With increasing mylonitization,obvious changes took place in trace elements in minerals and rocks,enriching gold and mineralizing elements.The S and Pb isotope data indicated that the ore-forming materials were derived from the strata.Hydrogen and oxygen isotopic and fluid inclusion studies also implied that the ore-forming fluid was much closer to meteoric water from the early to the late ore-forming stage.The Linglong gold deposit,Shangdong Province,is a quartz-type gold deposit in a brittle shear zone.Changes in rocks,minerals and trace elements occurred in the process of f ormation of gold quartz veins,and the analytical results of S,Pb ,Hand O isotopes showed that ore deposition is connected not only with the Jiaodong Group,but also with anatexic granites.  相似文献   

11.
In the Xinchang-Yongjia silver (lead-zinc) ore belt, there mainly occur the large to medium-sized Haoshi, Bamao, Dalingkou and Wubu silver deposits or silver-bearing lead-zinc deposits. On the basis of researches on these typical deposits, the mechanism of leaching-drawing mineralization of Mesozoic geothermal water and the related model are put forward in this paper in the light of the time interval between rock and formation ages as well as hydrogen, oxygen, sulphur and lead isotope geochemical characteristics. The major metallogenic process occurred in volcanic rock layers. The ore-forming fluids are geothermal water coming from meteoric water and circulating at shallow layers. This geothermal water leached and absorbed ore-forming materials from its country rocks during its flowing (such metallogenic elements as silver, lead-zinc and sulphur mainly came from consolidated volcanic rocks), leading to the formation of meso - epithermal silver deposits.  相似文献   

12.
Western Yunnan is the well-known polymetallic province in China. It is characterized by copper-gold mineralization related to Cenozoic alkali-rich porphyry. This paper analyzes the silicon isotope data obtained from four typical alkali-rich porphyry deposits based on the dynamic fractionation principle of silicon isotope. The study shows that the ore materials should originate mainly from alkali-rich magmas, together with silicon-rich mineralizing fluids. The process of mineralization was completed by auto-metasomatism, i.e. silicon-rich mineralizing fluids (including alkali-rich porphyry and wall-rock strata) replaced and altered the country rocks and contaminated with crustal rocks during the crystallization of alkali-rich magmas. Such a process is essentially the continuance of the metasomatism of mantle fluids in crust's mineralization. This provides important evidence of silicon isotopic geochemistry for better understanding the mineralization of the Cenozoic alkali-rich porphyry polymetallic deposi  相似文献   

13.
<正>The Chang'an gold ore deposit in western Yunnan is located at the southern segment of the Ailaoshan metallogenic belt.The ore bodies are preserved in fractured Ordovician sedimentary clastic rocks.The gold-bearing minerals occur dominantly in sulfide-quartz veins.Fluid inclusion analysis shows that the Chang'an gold ore deposit is characterized by epithermal gold mineralization at temperatures between 200℃and 280℃at a shallow crustal level.The mineralizing fluids have intermediate to low salinity(6%-18%) and low densities(0.72-1.27 g/cm~3).The ore minerals haveδ~(34)S in a range from -13‰to 3.57‰,concentrated from -2.06‰to 3.57‰with an average of 1.55‰.The ~(206)Pb/~(204)Pb,~(207)Pb/~(204)Pb and ~(208)Pb/~(204)Pb values are 18.9977-19.5748,15.7093-15.784,39.3814-40.2004 respectively.These isotope data suggest that the ore-forming elements were mainly derived from mixed crustal and mantle sources.The Chang'an gold ore deposit and Tongchang Cu-Mo deposit are closely related to each other in their spatial distribution and age of formation.They have similar sources of mineralizing elements and identical ore-forming metal elements,and show a close relationship in physical and chemical conditions of mineralization.The two deposits constitute an epithermal-porphyry -skarn type Cu-Mo-Au mineralization system in the Tongchang-Chang'an area,which is related to the Cenozoic high-K alkaline magmatism.  相似文献   

14.
Metallogenic Mechanism of the Tianbaoshan Pb—Zn Deposit,Sichuan   总被引：8，自引：3，他引：5  
The Tianbaoshan Pb-Zn deposit in Sichuan Province,exhibiting open-space-filling and /or replacement textures,occurs as being of vine style in the Sinian(Late Proterozoic) carbonate rocks,and is simple in ore composition.A systematic study of lead isotope and rareearth elements reveals that the ore-forming materials were derived from multiple sources.The ultimate source of the sulfur in all stages in seawater sulfate but the reducing mechanisms are different,The carbon was derved from marine carbonate and organic matter,The ore-forming fluid,meteoric in origin,belongs to a Ca^2 -Mg^2 -Cl^--Hco3^- type of weak acidic to alkalic solutions with a salinity of about 5wt% NaCl.The ore was formed at the depth of about 1 km from 150 to 250℃ during the main stage of ore deposition.The heated meteoric water,after extracting ore materials from wall rocks,evolved into ore-forming solution with a low salinity, in which metals were trasported as chloride complexes such as PbCl,ZnCl and ZnCl.The metal-bearing solution moved upward along deep faults to low-pressure zones,where the metal ions reacted with reduced sulfur and were precipitated as sulfied minerals.The textures of the minerals were controlled by the rate at which the reduced sulfur was supplied.  相似文献   

15.
The greenstone belt and metamorphosed microclastic rock-type superlarge gold deposits in China are hosted in metamorphic rocks and later intrusive bodies.Sedimentation.regional metamorphism and mineralization contributed a lot to the formation of the deposits,so did remelting magmatic process to some deposits,but the deposits were finally formed by reworking processes.The key factor leading to the formation of superlarge gold deposits is the reworking intensity,which for superlarge gold deposits is reflected by the large-scale reworked source rocks and even ore materials of various sources,strongly oxidized ore-forming fluids with a long and repeated active history and stable geothermal heat current.The factor which decides the reworking intensity is the network consisting of structures of different classes.  相似文献   

16.
Petrogenesis of Cenozoic Potassic Volcanic Rocks in the Nangqen Basin   总被引：2，自引：0，他引：2  
The Nangqen basin is one of the Tertiary pull-apart basins situated in the east of the Qiangtang block.Similar to the adjacent Dengqen basin and Baxoi basin, there occurred a series of potassic volcanic and sub-volcanic rocks, ranging from basic, intermediate to intermediate-acid in lithology.Based on the study of petrology, mineralogy and geochemistry, including REEs, trace elements, isotopic elements and chronology, the authors concluded that the Cenozoic potassic volcanic rocks in the Nangqen basin were formed in the post-collisional intraplate tectonic settings. The relations between the basic, intermediate and intermediate-acid rocks are neither differentiation nor evolution, but instead the geochemical variability is mainly attributable to the different partial melting degrees of the mantle sources formed at depths of 50-80 km.The sources of the potassic rocks are enriched metasomatic mantle that has experienced multiple mixing of components mainly derived from the crust. The recycling model can b  相似文献   

17.
Sulphide inclusions, which represent melts trapped in the minerals of magmatic rocks and xenoliths, provide important clues to the behaviour of immiscible sulphide liquids during the evolution of magmas and the formation of NieCueFe deposits. We describe sulphide inclusions from unique ultramafic clots within mafic xenoliths, from the mafic xenoliths themselves, and from the three silica-rich host plutons in Tongling, China. For the first time, we are able to propose a general framework model for the evolution of sulphide melts during the evolution of mafic to felsic magmas from the upper mantle to the upper crust. The model improves our understanding of the sulphide melt evolution in upper mantle to upper crust magmas, and provides insight into the formation of stratabound skarn-type FeeCu polymetallic deposits associated with felsic magmatism, thus promising to play an important role during prospecting for such deposits.  相似文献   

18.
Ore forming processes involve the redistribution of heat, mass and momentum by a wide range of processes operating at different time and length scales. The fastest process at any given length scale tends to be the dominant control. Applying this principle to the array of physical processes that operate within magma flow pathways leads to some key insights into the origins of magmatic Ni-Cu-PGE sulfide ore deposits. A high proportion of mineralised systems, including those in the super-giant Noril'sk-Talnakh camp, are formed in small conduit intrusions where assimilation of country rock has played a major role. Evidence of this process is reflected in the common association of sulfides with varitextured contaminated host rocks containing xenoliths in varying stages of assimilation. Direct incorporation of S-bearing country rock xenoliths is likely to be the dominant mechanism for generating sulfide liquids in this setting. However, the processes of melting or dissolving these xenoliths is relatively slow compared with magma flow rates and, depending on xenolith lithology and the composition of the carrier magma, slow compared with settling and accumulation rates. Chemical equilibration between sulfide droplets and silicate magma is slower still, as is the process of dissolving sulfide liquid into initially undersaturated silicate magmas. Much of the transport and deposition of sulfide in the carrier magmas may occur while sulfide is still incorporated in the xenoliths, accounting for the common association of magmatic sulfide-matrix ore breccias and contaminated "taxitic" host rocks. Effective upgrading of so-formed sulfide liquids would require repetitive recycling by processes such as reentrainment, back flow or gravity flow operating over the lifetime of the magma transport system as a whole. In contrast to mafic-hosted systems, komatiite-hosted ores only rarely show an association with externally-derived xenoliths, an observation which is partially due to the predominant formation of ores in lava flows rather than deep-seated intrusions, but also to the much shorter timescales of key component systems in hotter, less viscous magmas. Nonetheless, multiple cycles of deposition and entrainment are necessary to account for the metal contents of komatiite-hosted sulfides. More generally, the time and length scale approach introduced here may be of value in understanding other igneous processes as well as non-magmatic mineral systems.  相似文献   

19.
The skarn and ore bodies of the stratabound skarn copper deposits of Tongling, Anhui Province, are both controlled by definite stratigraphic horizons, and they are concordant with the strata. They occur as layers and layer-like bodies in permeable carbonate rocks of the Middle-Upper Carboniferous Huanglong and Chuanshan Formations which are underlain by impermeable shale or siliceous rocks of the Upper Devonian Wutong Formation. The authors study the dynamics of ore-forming processes of the ore deposits with the dynamic model of coupled transport and reaction, and the following results are obtained: The salinity gradient and flow rate of the ore-forming fluids can both promote the mixing and reaction of juvenile water and formation water, and the permeable strata are favourable sites for the intense transport-reaction of mixing and the formation of deposits. (2) As isothermal transport-reaction took place along the bedding of strata, the moving transport-reaction front formed at the contact between the  相似文献   

20.
We investigated the weathering-pedogenesis of carbonate rocks and its environmental effects in subtropical regions of China. The investigation demonstrated that the weathering- pedogenesis of carbonate rocks is the process of a joint action of corrosion and illuviation and metasomatism in subtropical region. It is characterized by multi-stage, multi-path and multi-style. With the persisting development of weathering-pedogenesis of carbonate rocks, metasomatic pedogenesis progressively became the main process of the weathering-pedogenesis and the dominant style of formation of minerals. And it proceeds through the whole process of evolution of the weathering-pedogenesis of carbonate rocks. The stage evolution of weathering-pedogenesis of carbonate rocks and the fractionation evolution of newly produced minerals are characterized by obvious vertically zoning structures and the rules of gradation of elements geochemical characteristics in the carbonate rocks weathering profiles. The geochemical process of weathering-pedogenesis of carbonate rocks can be divided into three geochemical evolution stages, i.e., the Ca, Mg-depletion and Si, Al-enrichment stage; the Fe, Mn enrichment stage and the Si-depletion and Al-enrichment stage in the subtropical regions. Consistent with the three geochemical evolution stages, the sequence of formation and evolution of minerals can be divided into the clay mineral stage; the Fe, Mn oxide and the gibbsite stage. The influence of weathering-pedogenesis of carbonate rocks on the chemical forms of heavy elements is mainly affected via newly produced components and minerals in the process of weathering-pedogenesis, e.g., iron oxide minerals and organic matters. The important mechanism for the mobilization, transport and pollution of F and As is affected the selective adsorption and desorption of F and As on the surface of iron oxide minerals in the subtropical karst zones, i.e., the selective adsorption and desorption on mineral surfaces of newly produced minerals in the process of weath  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号