首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
Abstract: In the Hishikari low-sulfidation epithermal gold deposit, Japan, columnar adularia crystals commonly precipitated directly on to the fracture surface of wall rock, and then electrum precipitated on the columnar adularia with fine-grained adularia and quartz. To reveal the characteristics of mineralizing fluids and the elevation of paleo-water tables at the earliest stage of mineralization in the Honko-Sanjin zone of the Hishikari deposit, the fluid inclusions in the columnar adularia in gold-bearing quartz–adularia veins were studied.
Coexistence of vapor-rich and liquid-rich two–phase primary fluid inclusions indicates the deposition of columnar adularia from boiling fluids. The precipitation temperatures range from 175 to 215C, and generally increase with depth. The temperatures of final melting point of ice range from –1.2 to –0.1C with an average of –0.5C, corresponding to salinity ranging from 0.2 to 2.1 wt% NaCl equivalent with an average of 0.9 wt% NaCl (eq.). Concentrations of non-condensable gases such as CO2 were under the detection limit of a laser Raman microprobe spectrometer. From the precipitation temperature of columnar adularia in the Hosen–2 vein and the boiling point – depth curve for a 0.9 wt% NaCl (eq.) fluid, paleo-water table was estimated to be at an elevation of about +170 m. The elevation of the paleo-water tables for other veins was estimated to range from +140 to +215 m.  相似文献   

2.
Abstract. Laser Raman microprobe analysis was performed on the fluid inclusions from the Honko-Sanjin zone in the Hishikari epithermal gold deposit, southern Kyushu, Japan. Gas concentrations of fluid inclusions through the zone were below detection limits (e.g., 5 mmole/kg H2O for CO2), with an exception at shallow portion in which the CO2/N2 mole ratio was determined to be 5.3. Boiling of hydrothermal solutions probably separated gases from ore fluids at the deep portion of the deposit, and migration of gases to shallow portion resulted in CO2-rich steam-heated water and related acid alteration.  相似文献   

3.
A breccia vein sampled from a shear zone in greenschist facies metapelites at Mount Isa, Queensland, Australia, shows a systematic variation in vein geometry that is related to the geometry of folding and faulting within the sample. Calcite vein-fill is coarse grained and equigranular, suggesting precipitation in a fluid-filled space. Partially folded veins suggest that veining occurred during folding and faulting. The breccia vein contains a central zone in which dilation has occurred simultaneously in all directions in the plane of section, implying that this was a zone of high fluid pressure and nearly isostatic differential stress during folding and faulting. From these observations, it can be inferred that the breccia vein was a zone of high permeability and a likely fluid channel during deformation. This hypothesis was tested by stable isotope analysis of veins and host rocks. The calcite veins have δ13C values of -11.1 ± 0.1% and δ18O values of 6-10%o, whereas the host metapelite has δ13C values of -10.62 and -10.11% and δ18O values of 14-15%o. These values are consistent with an igneous-derived, H2O-dominated fluid that exchanged little oxygen with the host rocks, but derived much of its carbon from the wall rock. The isotopic disequilibrium between the veins and the wall rock confirms that the fluid was externally derived, and that the breccia vein acted as a channel for large-volume fluid flow within the shear zone.  相似文献   

4.
Abstract: Transportation of various kinds of elements occurred in wall rocks (Quaternary andesites) during the hydrothermal alteration accompanied by the Hishikari epithermal gold mineralization. For example, K2O and MgO contents of wall rocks decrease away from the gold-quartz veins, while (CaO+Na2O) content increases, and SiO2 content is variable near the veins. Hydrothermal alteration zoning and bulk compositional variations in wall rocks suggest that the mixing of hydrothermal solution and acidic groundwater took place an important role as the cause for the hydrothermal alteration and bulk compositional variations. The relationship between dissolved silica concentration and temperature of hydrothermal solution mixed with groundwater is obtained based on precipitation kinetics-fluid flow–mixing model, and the computed results are compared with the distribution of SiO2 minerals (quartz and cristobalite) in the hydrothermal alteration zones. This comparison suggests that the most reasonable flow rate of fluids migrating through hydrothermal alteration zones, and A/M (A: surface area of rocks interacting with fluid, M: mass of fluid) are estimated to be ca. 10-4.2 m/sec, and ca. 0.10 m2/kg, respectively. The mixing of two fluids (hydrothermal solution and acidic groundwater) can also explain δ18O zoning in the altered country rocks, hydrothermal alteration zoning from K-feldspar through K-mica to kaolinite from the center (veins) to margin, and deposition of gold.  相似文献   

5.
Abstract. Fluid inclusion and oxygen isotope studies are performed to obtain temperatures and oxygen isotopic compositions of hydrothermal fluids for the vein-type tungsten-copper deposit at Takatori in Ibaraki Prefecture, Japan. Temperatures of the hydrothermal fluids are calculated from fluid inclusion data. The calculation incorporates the effects of the salinity, gas concentration, and fluid pressure. The fluid temperatures range from 370 to 460C. For these calculations, this study obtains a density equation for H2O-NaCl-CO2 solution at the vapor-liquid two-phase boundary. Then the present study combines the obtained equation with the equation of state by Bowers and Helgeson (1983).
The fluid temperatures determined in this study are applied to the calculation of oxygen isotopic compositions of the hydrothermal fluids. The calculation of the oxygen isotopic compositions is based on the oxygen isotope analyses of vein quartz. The oxygen isotopic compositions of vein quartz range from +13.5 to +14.4 % relative to SMOW. Then, the oxygen isotopic compositions of the hydrothermal fluids in equilibrium with the vein quartz are calculated to be from +9.7 to +10.5 %. These δ18Ofluid values agree with those of magmatic fluids derived from the ilmenite-series granitic rock, which is related to the mineralization. Keywords: Takatori tungsten-copper deposit, fluid inclusion, oxygen isotope, vein quartz, H2O-NaCl-CO2 solution, density  相似文献   

6.
Abstract. The Cibaliung deposit is a low-sulfidation type epithermal gold deposit situated about 70 km west of the Bayah dome complex. The gold-bearing quartz veins are hosted by basaltic andesite of the Honje Formation, which is comparable to the host rock of gold deposits at the Bayah dome complex.
In order to clarify the timing of the mineralization and the volcanism at the Cibaliung area, two radiometric dating methods were applied. First, 40Ar/39Ar dating was conducted on six adularia samples to elucidate the age of mineralization. Second, K-Ar method was applied to two samples of the host rock, andesite and the Cibaliung tuff, in order to reveal the timing of volcanism.
The 40Ar/39Ar dating determined mineralization ages in the range from 11.18 to 10.65 Ma while the K-Ar dating indicated the age of the andesite and the Cibaliung tuff to be 11.4±0.8 Ma and 4.9±0.6 Ma, respectively. These results imply that the epithermal gold mineralization in the Cibaliung area is related to the volcanic activity that produced the Honje Formation, while the Cibaliung tuff played an important role in the preservation of the Cibaliung deposit. The Cibaliung deposit is the oldest epithermal gold deposit yet discovered in western Java.  相似文献   

7.
ABSTRACT Despite the close association with volcanic activity, the source of metals and ligands in the epithermal ore deposits is still controversial. In order to explore the magmatic–hydrothermal connection further, silicate melt, saline- and water-rich fluids, and CO2 vapours are documented that are trapped as inclusions in quartz phenocrysts from dacitic dykes associated with epithermal gold/base metal mineralization in the Shila district (Peru). Melt inclusion characteristics, and microthermometric and laser Raman fluid inclusion data are presented. The investigation of melt and fluid inclusions reveals that the volatile phase of magmas might represent the precursors to the early chlorine-rich ore-forming epithermal solutions. Microthermometric investigations in magmatic quartz crystals and data on quartz mineralized veins suggest that the fluid evolution and ore deposition may be the result of several processes including: release of an evolving magmatic fluid, and/or boiling, and/or mixing.  相似文献   

8.
色甫金铜矿是新近在冈底斯南缘新生代斑岩成矿带内揭示的一个叠加于热液脉型铜矿上的浅成低温热液型金矿.详细的野外地质调查显示,色甫金铜矿和邻近的鸡公西矿区范围内先后经历了早始新世磁铁矿化、晚始新世-早渐新世与韧性剪切活动有关、早中新世钼矿化和铜矿化以及稍晚的金矿化等多期热液活动.对各期流体活动形成的石英中流体包裹体的岩相学、显微测温、显微激光拉曼和氢-氧同位素分析显示,与磁铁矿化有关的流体为岩浆热液混合建造水的高温、高盐度富水流体;与钼矿化有关的流体为岩浆热液与大气降水混合的高温、高盐度富水流体;与铜矿体形成有关的流体为具有岩浆贡献的中高温含CO2低盐度流体与大气降水来源的低温低盐度富水流体混合的产物;与金矿体形成有关的流体为具有岩浆贡献的中温含CO2±CH4±N2的中低盐度流体与大气降水来源的低温低盐度富水流体混合的产物.利用流体包裹体显微测温对其捕获温压估算的结果显示,铜矿体和钼矿化体形成前,该地区有过1.5~4.1 km的剥蚀,之后至金矿体形成前时有过近6 km的剥蚀,金矿体形成后剥蚀为0.8~1.2 km.矿区后续工作应优先针对近南北向断裂中赋存的蚀变岩型金矿开展工作.  相似文献   

9.
Abstract. The Francis Creek area located at the Sybil graben in North Queensland, Australia, has some features of epithermal gold mineralization such as gold-bearing quartz vein and silica body hosted in rhyodacitic rocks of the Late Carboniferous Hells Gate Formation. In order to understand the nature of the paleo-hydrothermal activity in this area and to aid exploration for an economic gold deposit in this area, we carried out hydrothermal alteration mapping surrounding the veins and silica body, over an area of about 7 times 5 km2.
We defined two alteration zones and inferred the center of hydrothermal activity. Fluid inclusion shows the boiling feature, and the microthermometry analysis resulted in the trapping temperature of 240°C and low salinity. This temperature is consistent with the formation temperature of clay mineral in the host rocks. On the basis of whole-rock composition, the silica body was identified as silicified rocks. Precious metal minerals such as electrum and acanthite coexist with sulfide minerals. Iodagylite was identified as a product of weathering. The sulfide minerals imply that the low-sulfidation epithermal gold mineralization occurred in the Francis Creek area.  相似文献   

10.
Liqiang Yang    Jun Deng    Chunying Guo    Jing Zhang    Shaoqing Jiang    Bangfei Gao    Qingjie Gong    Qingfei Wang 《Resource Geology》2009,59(2):181-193
The Dayingezhuang gold deposit is located in the central part of the Zhaoping Fault Zone, which is one of the most important gold-hosting faults in the Jiaodong gold province of China. Dayingezhuang is a typical large-scale shear zone-hosted disseminated gold deposit with superimposed silver mineralization. Fluid inclusion (FI) petrography and microthermometry, and analysis of oxygen and hydrogen isotopes for fluid inclusions were conducted to determine the characteristics of the ore-forming fluids and the processes of silver mineralization. Microthermometry data of FI indicated that ore-forming fluids are characterized by low salinity and low density. Homogenization pressures of FI are estimated at 20 × 105–220 × 105 Pa. The change in ore-forming fluids from K2SO4 type to NaCl type indicates the superposition of two hydrothermal mineralizing events. Ore-forming fluids were dominated by magmatic components in the early mineralization period, and affected by meteoric waters in the late period. Gold may have been transported as Au-S or Au-Cl complexes, whereas silver was transported as Ag-Cl complexes. Early fluid boiling and later fluid mixing are thought to be two of the main factors causing the deposition and superimposing of gold and silver to form the large deposit.  相似文献   

11.
目前冈底斯成矿带报道的斑岩型矿床主要集中在东段,而鲁尔玛斑岩型铜(金)矿为冈底斯成矿带西段新发现的铜矿,具有钾硅酸盐化、绢英岩化、青磐岩等明显的斑岩型矿床蚀变特征.其热液脉体从早到晚化分为:钾硅酸盐化脉(A脉)、石英-金属硫化物脉(B脉)以及石英-绿帘石-碳酸盐化脉(D脉).对各阶段热液脉体的的流体包裹体进行了岩相学、显微测温、显微激光拉曼和H-O-C同位素等分析.发现A脉石英中流体包裹体的形成温度集中在390~460℃,盐度介于4.5%~21.6%NaCleqv和43.6%~59.6%NaCleqv两个区间;B脉石英中流体包裹体的形成温度集中在310~380℃,盐度介于3.6%~19.8%NaCleqv和6.0%~16.0%NaCleqv两个区间;D脉石英和方解石中流体包裹体的形成温度集中在200~320℃,盐度集中在0.4%~14.7%NaCleqv.拉曼分析表明,鲁尔玛铜(金)矿的流体包裹体含CO2、N2、CH4等气体及石盐子晶和多种金属硫化物和金属氧化物子晶.各热液脉体石英中流体包裹体的δDH2O,V-SMOW值的变化范围为-128‰^-110‰,δ18OH2O,V-SMOW值的变化范围为-9.09‰^-1.45‰,方解石的δ13CCal,V-PDB值的变化范围为-20.8‰^-19.8‰,δ18OCal,V-SMOW值的变化范围为-5.9‰^-4.9‰,展现出岩浆热液的特征,晚期还有大气降水的加入.研究结果显示,成矿流体属高温、高盐度、含CO2、N2、CH4等气体和Cu、Fe、Mo等金属元素的Ca+-Na+-Cl-H2O体系流体,具有典型的斑岩型铜矿床成矿流体的特征.成矿流体从深部封闭体系运移到浅部的开放体系,温压环境突变导致金属硫化物沉淀,形成A脉和B脉型矿化.随着成矿物质的大量析出,同时伴随着大气降水等因素的影响,流体温度、盐度迅速降低,产生D脉型矿化.  相似文献   

12.
五凤金矿床是位于延边地区的浅成低温热液金矿床。矿脉的产出受不同方向断裂构造控制,主要分布于碱长花岗岩、角闪安山岩等侵入体及地层之中。研究表明,热液金矿化可分为石英--冰长石--方解石阶段,石英--方解石1阶段,石英--方解石2阶段及方解石阶段4个阶段。流体包裹体研究表明,研究区主成矿阶段石英中主要发育气液两相流体包裹体;其均一温度范围为129.8℃~236.5℃,峰值区间为190℃~220℃,盐度w(NaCl)为0.83%~1.98%。成矿流体为低温、低盐度的NaCl--H2O体系热液。氢氧同位素研究结果表明,五凤金矿床成矿流体为岩浆热液与大气降水的混合流体,矿床属浅成低温热液成因类型。  相似文献   

13.
扎格拉金矿位于班公湖-怒江结合带东段及冈底斯-念青唐古拉板片北缘的腾冲-班戈岩浆弧带上;受被动陆缘深海复理石建造、 脆-韧性剪切带和深成岩浆活动控制。流体包裹体类型以单相和A型两相盐水溶液包裹体为主;次为B型两相盐水溶液包裹体、 富CO2两相包裹体和含CO2三相包裹体;成矿流体属中低温和中低盐度H2O-NaCl-CO2体系。氢、 氧同位素和相对富含K+、 Na+、Ca2+、 Mg2+、Cl-、SO2-4 的包裹体液相成分;显示成矿流体主要来自长期封存于沉积岩的深循环热(卤)水中;矿床成因类型为浅成中低温地下热(卤)水溶滤型金矿床。其成矿特征和流体性质与穆龙套型金矿床具有诸多相似性;研究该区域对西藏“沙丁板岩系”分布区金铜多金属找矿具有重要意义。  相似文献   

14.
浅成低温热液型金矿床研究最新进展   总被引:23,自引:0,他引:23  
江思宏  聂凤军  张义  胡朋 《地学前缘》2004,11(2):401-411
浅成低温热液型金矿床是目前世界上最为重要的金矿床类型之一 ,也是当前国际矿床学界研究的热点之一。近年来对该类型矿床的深入研究 ,包括对该类矿床的进一步分类、流体形成演化、成矿时代、与碱性岩之间的关系 ,以及与斑岩型及其他类型矿床之间的内在联系等方面均取得了重要进展。研究表明 ,高硫化型与低硫化型金矿床不仅在矿物组合上具有显著差别 ,而且在形成的构造背景、成矿机理等方面也明显不同。高硫化型矿床主要形成于挤压应力场环境和流体混合导致成矿物质沉淀 ,而低硫化型矿床主要产于张性或中性环境下由于流体的沸腾使得矿体形成。浅成低温热液型金矿床的形成时间受其所处大地构造环境演化的控制。与浅成低温热液型金矿床有关的碱性岩通常具有相似的地球化学特征 ,即碱性岩具有异常高的氧逸度和富含挥发份。由于发现大量的浅成低温热液型金矿床与斑岩型矿床之间密切伴生 ,它们之间的内在关系正在引起越来越多矿床学家的重视 ,对其形成机理的研究还有待于进一步深入  相似文献   

15.
从"景"、"场"、"相"、"床"4个等级体制观点出发,阐述了该金属成矿省成矿内部组成,观点新颖。金矿赋存于中新世-更新世马林丹群火山岩中,该群火山岩呈零星岛状散布于斯丹岗-哥塔巴托-大姑玛线性构造活动带(SCDL)的东部,并受到后期安山玢岩的侵入。安山玢岩具有埃达克岩性质,它的侵入对于后期的围岩蚀变和成矿作用起到重要的控制作用。拉拉布矿床的安山岩具有明显的热液蚀变,属于冰长石-绢云母型金矿化,认为金是在PH值近中性的浅表环境中由于热液沸腾并伴随流体的混合沉淀而成,通常富集于标高30~200m之间。围岩蚀变强度大,并有明显的分带规律,制约着金矿的形成。金的富集与下列地质事件相关:(1)形成角砾岩之前的围岩蚀变作用;(2)热液角砾岩的形成;(3)形成角砾岩后的围岩蚀变作用;(4)金矿形成。  相似文献   

16.
黑龙江省逊克县高松山金矿床地质特征及成因分析   总被引:7,自引:0,他引:7  
高松山金矿床是与火山作用关系密切的低温热液型金矿床.矿石类型主要为含金石英脉、构造角砾岩蚀变岩型.矿石硫同位素组成具有深源硫特点.流体包裹体中H、O同位素反映在成矿的过程中有大气降水加入.矿床产于中生代上白垩统火山岩中,与英安岩、安山岩、安山玢岩、流纹岩关系密切.岩石化学分析反映了活动大陆边缘环境.  相似文献   

17.
本文介绍了G.Friedrich等将矿相学、蚀变岩相学、流体包裹体和硫化物矿物相等研究紧密结合起来,来解释含金溶液来源和沉淀条件的方法,他们首先根据矿石组构及矿物交生关系准确划分成矿阶段及矿物生成顺序,并测定类质同象矿物的成分,再根据流体包裹体、矿石矿物组合、蚀变带矿物组合确定成矿温度,计算各阶段pH值变化范围;在loga (O2)一pH和loga (S2)-loga (O2)图解上就可以确定每个矿化阶段的物化条件及整个矿化过程物化条件的演变。据此,他们在西班牙Rodalquilar金矿研究后提出浅成热液中金以Au (HS)-2形式搬运,在近地表金因pH值、总硫活度降低及氧速度增加而沉淀的成矿模式。  相似文献   

18.
庙梁金矿床位于南秦岭柞水-山阳矿集区的中心地带,为了查明庙梁金矿成矿流体特征、金的沉淀机制及矿床成因,对该矿床不同成矿阶段脉石矿物中的流体包裹体进行了详细的岩相学、显微测温、激光拉曼光谱分析研究并与周边典型金矿床特征进行了对比.结果 表明,该矿床包裹体类型丰富,成矿早阶段主要为H2O-NaCl型包裹体(Ⅱ型)、部分H2...  相似文献   

19.
倪培  迟哲  潘君屹 《地学前缘》2020,27(2):60-78
斑岩型和浅成低温热液型矿床是全球铜、钼、金、银的主要来源之一,具有重要经济价值。这两类矿床之间通常存在紧密的时空关系,对其成矿流体性质和演化的解剖不仅有利于探究金属沉淀机制,也有助于揭示两者之间的内在成因联系。本文在综述国内外重要研究前沿基础上,以中国华南富家坞斑岩型铜钼(金)矿、桐村斑岩钼矿,以及邱村和安村浅成低温热液金矿为例,系统总结了斑岩型和浅成低温热液型矿床流体特征、演化规律和金属沉淀机制、探讨了从斑岩型到浅成低温热液型流体演化的“气相迁移”模型,并以福建紫金山铜金矿床为例,介绍了应用流体填图进行找矿预测的实例。  相似文献   

20.
Several high‐sulfidation epithermal gold orebodies in the Mankayan Mineral District were formed in an environment that has been already affected by earlier porphyry‐type mineralization. This study reports the geologic and geochemical characteristics of the Carmen and Florence epithermal orebodies, which are located in the south of the Lepanto main enargite–gold orebody. The gold‐bearing epithermal quartz veins in the Carmen and Florence areas are of two types: (i) the enargite‐rich veins and (ii) the quartz–pyrite–gold (QPG) veins. The two types of veins are mainly hosted by the Cretaceous Lepanto Metavolcanics basement rocks, with minor veins cutting the Pleistocene Imbanguila Dacite Pyroclastics. The mineral assemblages and homogenization temperatures of fluid inclusions indicate that the Carmen and Florence orebodies were deposited by fluids varying from high to very high sulfidation state. The enargite and QPG epithermal veins of Carmen and Florence cut porphyry‐type quartz veinlet stockworks and veins that host polyphase hypersaline fluid inclusions that did not homogenize at or below 400°C. These high‐temperature quartz exhibits distinctly different mineral chemistry from the quartz of the QPG and enargite‐rich epithermal veins. In particular, the Ti content of quartz of the porphyry‐type veinlet stockwork is elevated (>100 ppm), whereas the Ti concentration of the epithermal vein quartz crystals are below detection limits. The Fe concentration of quartz is high in epithermal vein quartz (>300 ppm), whereas nearly undetected in the porphyry‐type stockwork veinlet quartz. Multiple generations of quartz with different mineral chemistry, fluid inclusions morphology, temperature, salinity and bulk gas compositions, and stable isotopic ratios indicate the variable hydrothermal conditions throughout the mineralization history of the Mankayan District. The temperature, pH, sulfidation state, oxidation state, and fluid composition vary among the orebodies in Carmen and Florence areas. Furthermore, the characteristics of earlier alteration affected the apparent characteristics of subsequent mineralization.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号