共查询到20条相似文献，搜索用时 854 毫秒
1.
This paper presents a theoretical approach to analyse coupled, linear thermoporoelastic fields in a saturated porous medium under radial and spherical symmetry. The governing equations account for compressibility and thermal expansion of constituents, heat sink due to thermal dilatation of water and thermal expansion of the medium, and thermodynamically coupled heat–water flow. It has been reported in the literature that thermodynamically coupled heat–water flows known as thermo-osmosis and thermal filtration have the potential to significantly alter the flow fields in clay-rich barriers in the near field of a underground waste containment scheme. This study presents a mathematical model and examines the effects of thermo-osmosis and thermal-filtration on coupled consolidation fields in a porous medium with a cavity. Analytical solutions of the governing equations are presented in the Laplace transform space. A numerical inversion scheme is used to obtain the time-domain solutions for a cylindrical cavity in a homogeneous or a non-homogeneous medium. A closed form time-domain solution is presented for a spherical cavity in a homogeneous medium. Selected numerical solutions for homogeneous and non-homogeneous media show a significant increase in pore pressure and displacements due to the presence of thermodynamically coupled flows and a negligible influence on temperature. © 1998 John Wiley & Sons, Ltd. 相似文献
2.
The governing differential equations of unsaturated soils considering the thermo‐poro‐mechanical behaviour consist of equilibrium, moisture air and heat transfer equations. In this paper at first, following some necessary simplifications, the thermal three‐dimensional fundamental solution for an unsaturated deformable porous medium with linear elastic behaviour in Laplace transform domain is presented. Subsequently, the closed‐form time domain fundamental solutions are derived by analytical inversion of the Laplace transform domain solutions. Then a set of numerical results are presented, which demonstrate the accuracies and some salient features of the derived analytical transient fundamental solutions. Finally, the closed‐form time domain fundamental solution will be verified mathematically by comparison with the previously introduced corresponding fundamental solution. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
3.
Axisymmetric thermal consolidation of multilayered porous thermoelastic media due to a heat source 
下载免费PDF全文
下载免费PDF全文 This paper presents an analytical layer element solution to axisymmetric thermal consolidation of multilayered porous thermoelastic media containing a deep buried heat source. By applying the Laplace–Hankel transform to the state variables involved in the basic governing equations of porous thermoelasticity, the analytical layer elements that describe the relationship between the transformed generalized stresses and displacements of a finite layer and a half‐space are derived. The global stiffness matrix equation is obtained by assembling the interrelated layer elements, and the real solutions in the physical domain are achieved by numerical inversion of the Laplace–Hankel transform after obtaining the solutions in the transformed domain. Finally, numerical calculations are performed to demonstrate the accuracy of this method and to investigate the influence of heat source's types, layering, and the porous thermoelastic material parameters on thermal consolidation behavior. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
4.
This paper considers the transient response of a pressurized long cylindrical cavity in an infinite poroelastic medium. To obtain transient solutions, Biot's equations for poroelastodynamics are specialized for this problem. A set of exact general solutions for radial displacement, stresses, pore pressure and discharge are derived in the Laplace transform space by using analytical techniques. Solutions are presented for three different types of prescribed transient radial pressures acting on the surface of a permeable as well as an impermeable cavity surface. Time domain solutions are obtained by inverting Laplace domain solutions using a reliable numerical scheme. A detailed parametric study is presented to illustrate the influence of poroelastic material parameters and hydraulic boundary conditions on the response of the medium. Comparisons are also presented with the corresponding ideal elastic solutions to portray the poroelastic effects. It is noted that the maximum radial displacement and hoop stress at the cavity surface are substantially higher than the classical static solutions and differ considerably from the transient elastic solutions. Time histories and radial variations of displacement, hoop stress, pore pressure and fluid discharge corresponding to a cavity in two representative poroelastic materials are also presented. 相似文献
5.
The diffusion equation governs thermal conduction and groundwater flow phenomena. In this paper, we study the two‐dimensional radial propagation of a sinusoidal perturbation radiating from a cylindrical source within an infinite slab of homogeneous material. The solution of this problem has several applications. For instance, it can be used to determine the hydraulic diffusivity of the subsurface based on measurements of the hydraulic head around a vertical well during its development. For thermal problems, it can be used to determine the thermal diffusivity based on measurements of the temperature distribution around a cylindrical heat source generating a sinusoidal power per unit length. In this paper, we present a comprehensive analytical solution of this problem and we compare these solutions with numerical solutions. Two approximate analytical solutions, which can be relevant in practice, are also presented. Finally, we give an upper bound for the survival time of the transient part of the solution and we provide an estimate of the radius of influence of the sinusoidal solicitation. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
6.
We develop a new numerical model based on a precise integration method to investigate the coupled thermo-mechanical performance of layered transversely isotropic media around a cylindrical/tubular heat source. To obtain the relational matrices of the extended precise integration method, we first convert the governing equations of the problem into ordinary differential matrix equations through the Laplace–Hankel transform. Then, the cylindrical heat source is divided into a series of plane heat sources, and the plane temperature load term is added to the state vector between layer elements. By combining the layer elements, we build a layered transversely isotropic numerical model containing a cylindrical heat source in the transformed domain. Finally, we solve the model in the transformed domain and obtain the solution of the problem in the real domain through the Laplace–Hankel transform inversion. The accuracy of this method is verified by comparing the solutions with the results of the analytical method and the finite element method. Then, we study the influence of the anisotropy of thermal parameters, the embedded depth, the length/radius ratio, the type of heat source and the stratification of the medium on the thermo-mechanical coupled performance.
相似文献7.
Unsaturated soils are considered as porous continua, composed of porous skeleton with its pores filled by water and air. The governing partial differential equations (PDE) are derived based on the mechanics for isothermal and infinitesimal evolution of unsaturated porous media in terms of skeleton displacement vector, liquid, and gas scalar pressures. Meanwhile, isotropic linear elastic behavior and liquid retention curve are presented in terms of net stress and capillary pressure as constitutive relations. Later, an explicit 3D Laplace transform domain fundamental solution is obtained for governing PDE and then closed‐form analytical transient 3D fundamental solution is presented by means of analytical inverse Laplace transform technique. Finally, a numerical example is presented to validate the assumptions used to derive the analytical solution by comparing them with the numerically inverted ones. The transient fundamental solutions represent important features of the elastic wave propagation theory in the unsaturated soils. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
8.
An analytical solution is proposed for transient flow and deformation coupling of a fluid‐saturated poroelastic medium within a finite two‐dimensional (2‐D) rectangular domain. In this study, the porous medium is assumed to be isotropic, homogeneous, and compressible. In addition, the point sink can be located at an arbitrary position in the porous medium. The fluid–solid interaction in porous media is governed by the general Biot's consolidation theory. The method of integral transforms is applied in the analytical formulation of closed‐form solutions. The proposed analytical solution is then verified against both exact and numerical results. The analytical solution is first simplified and validated by comparison with an existing exact solution for the uncoupled problem. Then, a case study for pumping from a confined aquifer is performed. The consistency between the numerical solution and the analytical solution confirms the accuracy and reliability of the analytical solution presented in this paper. The proposed analytical solution can help us to obtain in‐depth insights into time‐dependent mechanical behavior due to fluid withdrawal within finite 2‐D porous media. Moreover, it can also be of great significance to calibrate numerical solutions in plane strain poroelasticity and to formulate relevant industry norms and standards. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
9.
基于考虑热渗效应和等温热流效应的热-水-力耦合的线性热弹性固结控制方程,建立无限长空心圆柱饱和多孔介质热固结问题的一种理论求解方法。该方法先给出Laplace变换域上的解,然后,利用Stehfest法求其数值逆变换。该理论解考虑了空心圆柱体内、外透水界面随时间变化的外力和温度荷载耦合作用过程。最后,通过一算例分析了饱和多孔介质的热固结特征,给出其温度、孔压、位移和应力的演化规律 相似文献
10.
基于Biot波动理论和广义热弹性理论,对简谐线源荷载（力荷载和热荷载）作用下的热-流-固耦合地基的动力响应问题进行了研究。将地基看成是均质各向同性、完全饱和的多孔半空间介质,利用无量纲化和Fourier变换方法对热-流-固耦合控制方程进行简化,得到了变换域内应力分量、位移分量、温度分布及超孔隙水压力的一般解,并利用Fourier逆变换得到了相应的积分形式解答。通过数值计算对按热-流-固耦合理论、饱和多孔弹性理论和热弹性理论得到的结果进行了比较,同时分析了热-流-固耦合条件下热荷载激振频率对竖向应力、竖向位移、温度分布以及超孔隙水压力的影响。 相似文献
11.
采用应力跌落的简化应力-应变模型考虑土的应变软化特性,同时采用简化的体积应变?v与大主应变?1及大主应变?1与小主应变?3之间的相互关系反映土的剪胀特性,根据空间准滑动面(SMP)理论和平面应变轴对称问题的柱形孔扩张基本方程,推导并给出一般黏性土中柱形孔扩张问题的应力场、应变场、位移场、塑性区半径和孔扩张压力。通过算例分析,探讨了土的剪胀因素、软化特性对孔扩张问题的影响程度。为了反映中主应力的影响,将本文解与基于Mohr-Coulomb破坏准则的解答进行了比较。计算结果表明,土的剪胀性和软化特性及中主应力对孔扩张问题的影响是显著的,基于Mohr－Coulomb破坏准则的孔扩张解答往往偏于保守。 相似文献
12.
13.
为了研究多年冻土表层的水热分布情况,在非饱和冻土的能量守恒方程和水分迁移的质量控制方程的基础上考虑冰水相变和水汽相变过程,并考虑水汽运移传热及温度势对水汽迁移的影响,建立了非饱和冻土的水-热-汽耦合模型。采用光滑粒子流体动力学(smoothed particle hydrodynamics,简称SPH)方法可方便地计算它们的演化过程。为此,在计算中先求解能量守恒方程的含冰量及气态水含量,再对未冻水含量和温度场进行求解,从而实现了温度场与水汽场的耦合。在此基础上,模拟计算了第1类热边界条件下半无限空间介质内非稳态温度场、体积含水率及水汽通量的分布情况,并将计算结果与未考虑耦合的解析解进行比较,结果显示水汽耦合的作用不容忽略。最后,针对处于季节性周期温度边界下路基的水热场的分布情况进行计算。研究表明,相比于水-热耦合模型,所建立的水-热-汽耦合模型得到的计算结果更为接近实际监测结果,可很好地揭示非饱和冻土中的水热汽迁移特征及其相变过程。 相似文献
14.
We consider a system of nonlinear partial differential equations that arises in the modeling of two-phase flows in a porous medium. The phase velocities are modeled using a Brinkman regularization of the classical Darcy’s law. We propose a notion of weak solution for these equations and prove existence of these solutions. An efficient finite difference scheme is proposed and is shown to converge to the weak solutions of this system. The Darcy limit of the Brinkman regularization is studied numerically using the convergent finite difference scheme in two space dimensions as well as using both analytical and numerical tools in one space dimension. The results suggest that the Brinkman regularization may not approximate the accepted entropy solutions of the Darcy model and raise fundamental questions about the use of Brinkman type models in two-phase flows. 相似文献
15.
This paper presents an analytical solution for cavity expansion in thermoplastic soil considering non‐isothermal conditions. The constitutive relationship of thermoplasticity is described by Laloui's advanced and unified constitutive model for environmental geomechanical thermal effect (ACMEG‐T), which is based on multi‐mechanism plasticity and bounding surface theory. The problem is formulated by incorporating ACMEG‐T into the theoretical framework of cavity expansion, yielding a series of partial differential equations (PDEs). Subsequently, the PDEs are transformed into a system of first‐order ordinary differential equations (ODEs) using a similarity solution technique. Solutions to the response parameters of cavity expansion (stress, excess pore pressure, and displacement) can then be obtained by solving the ODEs numerically using mathematical software. The results suggest that soil temperature has a significant influence on the pressure‐expansion relationships and distributions of stress and excess pore pressure around the cavity wall. The proposed solution quantifies the influence of temperature on cavity expansion for the first time and provides a theoretical framework for predicting thermoplastic soil behavior around the cavity wall. The solution found in this paper can be used as a theoretical tool that can potentially be employed in geotechnical engineering problems, such as thermal cone penetration tests, and nuclear waste disposal problems. 相似文献
16.
This paper presents a novel, exact, semi-analytical solution for the quasi-static undrained expansion of a cylindrical cavity in soft soils with fabric anisotropy. This is the first theoretical solution of the undrained expansion of a cylindrical cavity under plane strain conditions for soft soils with anisotropic behaviour of plastic nature. The solution is rigorously developed in detail, introducing a new stress invariant to deal with the soil fabric. The semi-analytical solution requires numerical evaluation of a system of six first-order ordinary differential equations. The results agree with finite element analyses and show the influence of anisotropic plastic behaviour. The effective stresses at critical state are constant, and they may be analytically related to the undrained shear strength. The initial vertical cross-anisotropy caused by soil deposition changes towards a radial cross-anisotropy after cavity expansion. The analysis of the stress paths shows that proper modelling of anisotropic plastic behaviour involves modelling not only the initial fabric anisotropy but also its evolution with plastic straining. 相似文献
17.
An energy approach is proposed as a complement to the stress approach commonly considered for investigating soil desiccation cracking. The elastic strain energies before and after crack initiation are estimated by both numerical and analytical solutions. The energy released by cracking is then compared with the fracture energy to discuss crack initiation conditions. This leads to combined energy and stress conditions for crack initiation following Leguillon's theory. An approximate analytical solution is derived from a variational formulation of the porous elastic body equations. A cohesive zone model and finite element code are used to simulate crack propagation in an unsaturated porous body. This analysis shows that the energy criterion is reached before the stress criterion, and this can explain unstable crack propagation at the beginning. The approximate analytical solution allows predicting correctly the crack depth and opening in its initiation stage. 相似文献
18.
This paper presents the theoretical background of an elastic electro-osmosis consolidation model for saturated soils experiencing large strains, which considers volumetric strains induced by changes in both the hydraulic and electric driven pore water flows. Three fully coupled governing equations, considering the soil mechanical behaviour, pore water transport and electrical field, and their numerical implementation within an updated Lagrangian finite element formulation, are presented. The proposed model is first verified against a classical one-dimensional analytical solution for electro-osmosis consolidation to demonstrate its accuracy and efficiency. Then, various numerical examples are investigated to study the deformation characteristics and time dependent evolution of excess pore pressure. Finally, the importance of considering large strains in a consistent and proper way is demonstrated, and differences compared to models based on small strain theory are highlighted. 相似文献
19.
In this paper, we present a numerical model for simulating two-phase (oil–water and air–water) incompressible and immiscible flow in porous media. The mathematical model which is based on a fractional flow formulation is formed of two nonlinear partial differential equations: a mean pressure equation and a water saturation equation. These two equations can be solved in a sequential manner. Two numerical methods are used to discretize the equations of the two-phase flow model: mixed hybrid finite elements are used to treat the pressure equation, h-based Richards' equation and the diffusion term in the saturation equation, the advection term in the saturation equation is treated with the discontinuous finite elements. We propose a better way to calculate the nonlinear coefficients contained in our equations on each element of the discretized domain. In heterogeneous porous media, the saturation becomes discontinuous at the interface between two porous media. We show in this paper how to use the capillary pressure–saturation relationship in order to handle the saturation jump in the mixed hybrid finite element method. The two-phase flow simulator is verified against analytical solutions for some flow problems treated by other authors. 相似文献
20.
A fully coupled element‐free Galerkin model for hydro‐mechanical analysis of advancement of fluid‐driven fractures in porous media 下载免费PDF全文
下载免费PDF全文 Hydraulic fracturing (HF) of underground formations has widely been used in different fields of engineering. Despite the technological advances in techniques of in situ HF, the industry uses semi‐analytical tools to design HF treatment. This is due to the complex interaction among various mechanisms involved in this process, so that for thorough simulations of HF operations a fully coupled numerical model is required. In this study, using element‐free Galerkin (EFG) mesh‐less method, a new formulation for numerical modeling of hydraulic fracture propagation in porous media is developed. This numerical approach, which is based on the simultaneous solution of equilibrium and continuity equations, considers the hydro‐mechanical coupling between the crack and its surrounding porous medium. Therefore, the developed EFG model is capable of simulating fluid leak‐off and fluid lag phenomena. To create the discrete equation system, the Galerkin technique is applied, and the essential boundary conditions are imposed via penalty method. Then, the resultant constrained integral equations are discretized in space using EFG shape functions. For temporal discretization, a fully implicit scheme is employed. The final set of algebraic equations that forms a non‐linear equation system is solved using the direct iterative procedure. Modeling of cracks is performed on the basis of linear elastic fracture mechanics, and for this purpose, the so‐called diffraction method is employed. For verification of the model, a number of problems are solved. According to the obtained results, the developed EFG computer program can successfully be applied for simulating the complex process of hydraulic fracture propagation in porous media. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献