首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 22 毫秒
1.
Eastern Marmara region consists of three different morphotectonic units: Thrace–Kocaeli Peneplain (TKP) and Çamdağ–Akçakoca Highland (ÇAH) in the north, and Armutlu–Almacık Highland in the south of the North Anatolian Fault Zone (NAFZ). The geologic‐morphologic data and seismic profiles from the Sakarya River offshore indicate that the boundary between the TKP in the west and ÇAH in the east is a previously unrecognized major NNE–SSW‐trending strike‐slip fault zone with reverse component. The fault zone is a distinct morphotectonic corridor herein named the Adapazarı–Karasu corridor (AKC) that runs along the Sakarya River Valley and extends to its submarine canyon along the southern margin of the Black Sea in the north. It formed as a transfer fault zone between the TKP and ÇAH during the Late Miocene; the former has been experiencing extensional forces and the latter compressional forces since then. East–West‐trending segments of the NAFZ cuts the NE–SW‐trending AKC and their activity has resulted in the formation of a distinct fault‐bounded morphology, which is characterized by alternating E–W highlands and lowlands in the AKC. Furthermore, this activity has resulted in the downward motion of an ancient delta and submarine canyon of the Sakarya River in the northern block of the NAFZ below sea level so that the waters of the Black Sea invaded them. The NE–SW‐trending faults in the AKC were reactivated with the development of the NAFZ in the Late Pliocene, which then caused block motions and microseismic activities throughout the AKC. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

2.
《Geodinamica Acta》2001,14(1-3):3-30
Turkey forms one of the most actively deforming regions in the world and has a long history of devastating earthquakes. The better understanding of its neotectonic features and active tectonics would provide insight, not only for the country but also for the entire Eastern Mediterranean region. Active tectonics of Turkey is the manifestation of collisional intracontinental convergence- and tectonic escape-related deformation since the Early Pliocene (∼5 Ma). Three major structures govern the neotectonics of Turkey; they are dextral North Anatolian Fault Zone (NAFZ), sinistral East Anatolian Fault Zone (EAFZ) and the Aegean–Cyprean Arc. Also, sinistral Dead Sea Fault Zone has an important role. The Anatolian wedge between the NAFZ and EAFZ moves westward away from the eastern Anatolia, the collision zone between the Arabian and the Eurasian plates. Ongoing deformation along, and mutual interaction among them has resulted in four distinct neotectonic provinces, namely the East Anatolian contractional, the North Anatolian, the Central Anatolian ‘Ova’ and the West Anatolian extensional provinces. Each province is characterized by its unique structural elements, and forms an excellent laboratory to study active strike-slip, normal and reverse faulting and the associated basin formation.  相似文献   

3.
《Geodinamica Acta》2001,14(1-3):57-69
There is a N–S lying narrow strip of Neogene outcrop between the towns of Kuşadası and Söke in western Anatolia. It contains remnants of successive Neogene graben basins. The first graben began to form under the control of a N40–70°E-trending oblique fault system during the Early Miocene. At the initial phase of the opening coarse clastic rocks were deposited in front of the fault-elevated blocks as scree deposits and fanglomerates. Later the graben advanced into a large lake basin. Towards the end of the Middle Miocene the lacustrine sediments of the Early–Middle Miocene age underwent an approximately N–S compressional deformation and elevated above the lake level, and were partly eroded. During the Late Miocene a new graben basin began to form as a consequence of the development of E–W-trending normal faults, formed under the N–S extensional regime. This graben also turned later into a lake environment. The lake extended far beyond the limits of the fault zones, and covered the entire regions stretching from the south of Bafa Lake in the south to Kuşadası and beyond in the north. Micritic clayey limestones were predominantly deposited in the lake. A severe erosional phase followed the termination of the lake basin. This corresponds to the cessation of the N–S extension. When the N–S extension regenerated during the Pliocene(?)–Pleistocene, the Büyük Menderes graben system began to form. In the western part of the graben, a conjugated pair of oblique faults, the Priene–Sazlı fault and the Kuşadası fault, have formed. The faults having important strike-slip components, bounded a tectonic wedge, which began to move westward into the Aegean Sea region. Major morphological features of the region were formed under the effective control of these fault zones.  相似文献   

4.
Abstract

Turkey forms one of the most actively deforming regions in the world and has a long history of devastating earthquakes. The belter understanding of its neotectonic features and active tectonics would provide insight, not only for the country but also for the entire Eastern Mediterranean region. Active tectonics of Turkey is the manifestation of collisional intracontinental convergence- and tectonic escape-related deformation since the Early Pliocene (~5 Ma). Three major structures govern the neotectonics of Turkey; they are dextral North Anatolian Fault Zone (NAFZ), sinistral East Anatolian Fault Zone (EAFZ) and the Aegean–Cyprean Arc. Also, sinistral Dead Sea Fault Zone has an important role. The Anatolian wedge between the NAFZ and EAFZ moves westward away from the eastern Anatolia, the collision zone between the Arabian and the Eurasian plates. Ongoing deformation along, and mutual interaction among them has resulted in four distinct neotectonic provinces, namely the East Anatolian contractional, the North Anatolian, the Central Anatolian ‘Ova’ and the West Anatolian extensional provinces. Each province is characterized by its unique structural elements, and forms an excellent laboratory to study active strike-slip, normal and reverse faulting and the associated basin formation. © 2001 Éditions scientifiques et médicales Elsevier SAS  相似文献   

5.
《Geodinamica Acta》2001,14(1-3):147-158
Central Anatolia has undergone complex Neotectonic deformation since Late Miocene–Pliocene times. Many faults and intracontinental basins in this region were either formed, or have been reactivated, during this period. The eastern part of central Anatolia is dominated by a NE–SW-trending, left lateral transcurrent structure named the Central Anatolian fault zone located between Sivas in the northeast and west of Mersin in the southwest. Around the central part, it is characterized by transtensional depressions formed by left stepping and southward bending of the fault zone.Pre-Upper Miocene basement rocks of the region consist of the central Anatolian crystalline complex and a sedimentary cover of Tertiary age. These rock units were strongly deformed by N–S convergence. The entire area emerged to become the site of erosion and formed a vast plateau before the Late Miocene. A NE–SW-trending extensional basin developed on this plateau in Late Miocene–Early Pliocene times. Rock units of this basin are characterized by a thick succession of pyroclastic rocks intercalated with calcalkaline–alkaline volcanics. The volcanic sequence is unconformably overlain by Pliocene lacustrine–fluviatile deposits intercalated with ignimbrites and tuffs. Thick, coarse grained alluvial/colluvial fan deposits of marginal facies and fine grained clastics and carbonates of central facies display characteristic synsedimentary structures with volcanic intercalations. These are the main lines of evidence for development of a new transtensional Hırka–Kızılırmak basin in Pliocene times. Reactivation of the main segment of the Central Anatolian fault zone has triggered development of depressions around the left stepping and southward bending of the central part of this sinistral fault zone in the ignimbritic plateau during Late Pliocene–Quaternary time. These transtensional basins are named the Tuzla Gölü and Sultansazlığı pull-apart basins. The Sultansazlığı basin has a lazy S to rhomboidal shape and displays characteristic morphologic features including a steep and stepped western margin, large alluvial and colluvial fans, and a huge composite volcano (the Erciyes Dağı).The geometry of faulting and formation of pull-apart basins can be explained within the framework of tectonic escape of the wedge-like Anatolian block, bounded by sinistral East Anatolian fault zone and dextral North Anatolian transform fault zone. This escape may have been accomplished as lateral continental extrusion of the Anatolian Plate caused by final collision of the Arabian Plate with the Eurasian Plate.  相似文献   

6.
《Sedimentary Geology》2005,173(1-4):373-408
The Alaşehir (Gediz) Graben exemplifies clastic sedimentation in a long-lived continental half-graben in a semi-arid setting, developed within relatively incompetent metamorphic rocks. Early Miocene to Recent rift-related sediments are exhumed on both flanks of the graben, allowing detailed three-dimensional study. During the Early Miocene, small fan-delta lobes were shed northwards from the rugged Menderes Metamorphic Massif into a bordering lacustrine basin. During Early to Mid-Miocene time, large alluvial fans prograded northwards into this basin. Through-drainage to the Aegean Sea was established as the basin widened and filled. Discrete lobes of coarse alluvial fan sediments of latest Miocene(?)–Pliocene age, also shedding northwards, are likely to have been climatically influenced. Quaternary alluvium party infills the modern Alaşehır rift basin.The sedimentary information can be used to test two alternative tectonic models for the Alaşehır Graben. In the first model, an E–W graben bounded by high-angle faults was active during latest Miocene(?)–Recent time, whereas earlier Miocene sedimentation was controlled by N–S faulting related to a N–S compressional stress regime. In the second hypothesis, the Alaşehır Graben was initiated much earlier, in the Early Miocene and was then either continuously or episodically active until Recent. Our results, especially facies and palaeocurrent data from alluvial sediments, indicate that clastic sedimentation was controlled by mainly E–W faulting in a N–S stress regime. Assuming the Early Miocene clastic sediments are correctly dated, this supports the second (long-lived extension) model. However, rather than steady-state extension for ca. 15 Ma, the sedimentary evidence and regional context are consistent with a pulsed extension model, whereby initial Early to Mid-Miocene extension and related clastic sedimentation was followed by a second phase of extension in latest Miocene(?)–Pliocene time. The driving force of initial, Early Miocene extension was probably gravity spreading towards a south-Aegean subduction zone, whereas the inferred second extension pulse is seen as being triggered by westward “tectonic escape” of Anatolia towards the extending Aegean back-arc region.  相似文献   

7.
《Geodinamica Acta》2001,14(1-3):45-55
Field studies on the Neogene successions in south of İzmir reveal that subsequent Neogene continental basins were developed in the region. Initially a vast lake basin was formed during the Early–Middle Miocene period. The lacustrine sediments underwent an approximately N–S shortening deformation to the end of Middle Miocene. A small portion of the basin fill was later trapped within the N–S-trending, fault-bounded graben basin, the Çubukludağ graben, opened during the Late Miocene. Oblique-slip normal faults with minor sinistral displacement are formed possibly under N–S extensional regime, and controlled the sediment deposition. Following this the region suffered a phase of denudation which produced a regionwide erosional surface suggesting that the extension interrupted to the end of Late Miocene–Early Pliocene period. After this event the E–W-trending major grabens and horsts of western Anatolia began to form. The graben bounding faults cut across the Upper Miocene–Pliocene lacustrine sediments and fragmented the erosional surface. The Çubukludağ graben began to work as a cross graben between the E–W grabens, since that period.  相似文献   

8.
In northwest Anatolia, there is a mosaic of different morpho-tectonic fragments within the western part of the right-lateral strike-slip North Anatolian Fault (NAF) Zone. These were developed from compressional and extensional tectonic regimes during the paleo- and neo-tectonic periods of Turkish orogenic history. A NE-SW-trending left-lateral strike-slip fault system (Adapazari-Karasu Fault) extends through the northern part of the Sakarya River Valley and began to develop within a N–S compressional tectonic regime which involved all of northern Anatolia during Middle Eocene to early Middle Miocene times. Since the end of Middle Miocene times, this fault system forms a border between a compressional tectonic regime in the eastern area eastwards from the northern part of the Sakarya River Valley, and an extensional tectonic regime in the Marmara region to the west. The extension caused the development of basins and ridges, and the incursions of the Mediterranean Sea into the site of the future Sea of Marmara since Late Miocene times. Following the initiation in late Middle Miocene times and the eastward propagation of extension along the western part of the NAF, a block (North Anatolian Block) began to form in the northern Anatolia region since the end of Pliocene times. The Adapazari-Karasu Fault constitutes the western boundary of this block which is bounded by the NAF in the south, the Northeast Anatolian Fault in the east, and the South Black Sea Thrust Fault in the north. The northeastward movement of the North Anatolian Block caused the formation of a marine connection between the Black Sea and the Aegean/Mediterranean Sea during the Pleistocene.  相似文献   

9.
Abstract

Field studies on the Neogene successions in south of ?zmir reveal that subsequent Neogene continental basins were developed in the region. Initially a vast lake basin was formed during the early-Middle Miocene period. The lacustrine sediments underwent an approximately N-S shortening deformation to the end of Middle Miocene. A small portion of the basin fill was later trapped within the N-S-trending, fault-bounded graben basin, the Çubukluda? graben, opened during the Late Miocene. Oblique-slip normal faults with minor sinistral displacement are formed possibly under N–S extensional regime, and controlled the sediment deposition. Following this the region suffered a phase of denudation which produced a regionwide erosional surface suggesting that the extension interrupted to the end of Late Miocene–Early Pliocene period. After this event the E–W-trending major grabens and horsts of western Anatolia began to form. The graben bounding faults cut across the Upper Miocene–Pliocene lacustrine sediments and fragmented the erosional surface. The Çubukluda? graben began to work as a cross garden between the E–W grabens, since that period. © 2001 Éditions scientifiques et médicales Elsevier SAS  相似文献   

10.
Neotectonic field studies and detailed analyses of Neogene and Quaternary fault mechanisms in southwestern Anatolia enable us to recognize a succession of compressional and extensional events, and to characterize the direction of corresponding regional stresses. The three most important compressive phases occurred during the Miocene, and a much smaller one near the Plio-Quaternary boundary. The last one or two interrupted a widespread extension of much greater duration and amplitude. The whole tectonic evolution resembles that of the Aegean. The large extension by normal faulting is consistent with a minimum stress along a NNE-SSW average direction. It appears that this direction was N-S during the Pliocene and changed to NE-SW sometime during the Quaternary. This dominant NNE-SSW extension, which began during late Miocene or earliest Pliocene, was related to the development of the southwestern Anatolian graben system.  相似文献   

11.
The North Anatolian Fault Zone (NAFZ) is one of the most hazardous active faults on Earth, yet its Pliocene space‐time propagation across the north Aegean domain remains poorly constrained. We use low‐temperature multi‐thermochronology and inverse thermal modelling to quantify the cooling history of the upper crust across the Olympus range. This range is located in the footwall of a system of normal faults traditionally interpreted as resulting from superposed Middle–Late Miocene N–S stretching, related to the back‐arc extension of the Hellenic subduction zone, and a Pliocene‐Quaternary transtensional field, attributed to the south‐westward propagation of the NAFZ. We find that accelerated exhumational cooling occurred between 12 and 6 Ma at rates of 15–35 °C Ma?1 and decreased to <3 °C Ma?1 by 8–6 Ma. The absence of significant Plio‐Pleistocene cooling across Olympus suggests that crustal exhumation there is driven by late Miocene back‐arc extension, while the impact of the NAFZ remains limited.  相似文献   

12.
ABSTRACT

At the end of the Cenozoic, western Turkey was fragmented by intense intra-continental tectonic deformation resulting in the formation of two extensional areas: a transtensional pull-apart basin systems in the northwest, and graben systems in the central and southwest areas. The question of the connection of this Late Cenozoic extensional tectonics to plate kinematics has long been an issue of discussion. This study presents the results of the fault slip data collected in Bak?rçay Basin in the west of Turkey and addresses changes in the direction of extensional stresses over the Plio-Quaternary. Field observations and quantitative analysis show that Bak?rçay Basin is not a simple graben basin that has evolved during a single phase. It started as a graben basin with extensional regime in the Pliocene and was transformed into a pull-apart basin under the influence of transtensional forces during the Quaternary. A chronology of two successive extensional episodes has been established and provides reasoning to constrain the timing and location of subduction-related back-arc tectonics along the Aegean region and collision-related extrusion tectonics in Turkey. The first NW–SE trending extension occurred during the Pliocene extensional phase, characterized by slab rollback and progressive steepening of the northward subduction of the African plate under the Anatolian Plate. Western Turkey has been affected, during the Middle Quaternary, by regional subsidence, and the direction of extension changed to N–S, probably in relation with the propagation of the North Anatolian Fault System. Since the Late Quaternary, NE–SW extension dominates northwest Turkey and results in the formation and development of elongated transtensional basin systems. Counterclockwise rotation of Anatolian block which is bounded to the north by the right-lateral strike-slip North Anatolian Fault System, accompanies to this extensional phase.  相似文献   

13.
《Geodinamica Acta》2001,14(1-3):177-195
The east Anatolian plateau and the Lesser Caucasus are characterised and shaped by three major structures: (1) NW- and NE-trending dextral to sinistral active strike-slip faults, (2) N-S to NNW-trending fissures and /or Plio-Quaternary volcanoes, and (3) a 5-km thick, undeformed Plio-Quaternary continental volcano-sedimentary sequence accumulated in various strike-slip basins. In contrast to the situation in the east Anatolian plateau and the Lesser Caucasus, the Transcaucasus and the Great Caucasus are characterised by WNW-trending active thrust to reverse faults, folds, and 6-km thick, undeformed (except for the fault-bounded basin margins) continuous Oligocene-Quaternary molassic sequence accumulated in actively developing ramp basins. Hence, the neotectonic regime in the Great Caucasus and the Transcaucasus is compressional–contractional, and Oligocene-Quaternary in age; whereas it is compressional–extensional, and Plio-Quaternary in age in the east Anatolian plateau and the Lesser Caucasus.Middle and Upper Miocene volcano-sedimentary sequences are folded and thrust-to-reverse-faulted as a result of compressional–contractional tectonic regime accompanied by mostly calc-alkaline volcanic activity, whereas Middle Pliocene-Quaternary sequences, which rest with angular unconformity on the pre-Middle Pliocene rocks, are nearly flat-lying and dominated by strike-slip faulting accompanied by mostly alkali volcanic activity implying an inversion in tectonic regime. The strike-slip faults cut and displace dykes, reverse to thrust faults and fold axes of Late Miocene age up to maximum 7 km: hence these faults are younger than Late Miocene, i.e., these formed after Late Miocene. Therefore, the time period between late Serravalian (∼ 12 Ma) continent–continent collision of Arabian and Eurasian plates and the late Early Pliocene inversion in both the tectonic regime, basin type and deformation pattern (from folding and thrusting to strike-slip faulting) is here termed as the Transitional period.Orientation patterns of various neotectonic structures and focal mechanism solutions of recent earthquakes that occurred in the east Anatolian plateau and the Caucasus fit well with the N–S directed intracontinental convergence between the Arabian plate in the south and the Eurasian plate in the north lasting since Late Miocene or Early Pliocene in places.  相似文献   

14.
《International Geology Review》2012,54(14):1803-1821
ABSTRACT

In the Central Anatolia, the style of neotectonic regime governing the region has been a controversial issue. A tectonic study was carried out in order to contribute to this issue and better understand the neotectonic stress distribution and style of deformation in the west-southwest of the Konya region. From Middle Miocene to Recent time, Konya region was part of the Central Anatolia extensional province. The present-day topography in the west-southwestern part of Konya is characterized by alternating elongate grabens and horsts trending E-W and NW-SE. The grabens were developed upon low-grade metamorphic rocks of Palaeozoic and Mesozoic ages and ophiolite slabs of possibly Late Cretaceous age. The evolutionary history of grabens is episodic as evidenced by two graben infills; older and younger graben infills separated by an angular unconformity. The older infill consists of fluviolacustrine sequence intercalated with calc-alkaline lavas and pyroclastic rocks. This infill is folded; thrust faulted and Middle Miocene-Early Pliocene in age. The younger and undeformed basin fill comprises mainly of Plio-Quaternary conglomerates, sandstone-mudstone alternations of alluvial fan and recent basin floor deposits. Three major tectonic phases were differentiated based on the detailed mapping, morphological features and kinematic analysis. Approximately N-S trending extension began in the Middle Miocene-Early Pliocene in the region with the formation of E-W and NW-SE-trending grabens. Following NE-SW-directed compression which deformed the older basin fill deposits by folding and thrusting, a second period of ENE-WSW-trending extension began in the late Pliocene and continued to the present. The west-southwestern margin of the Konya depression is bounded by the Konya Fault Zone. It is an oblique-slip normal fault with a minor dextral strike-slip component and exhibits well-preserved fault slickensides and slickenlines. Recent seismicity and fault-related morphological features reveal that the Konya Fault Zone is an active neotectonic structure.  相似文献   

15.
《International Geology Review》2012,54(12):1401-1418
The Neogene–Quaternary succession in the Kütahya region is of importance in the neotectonic evolution of western Anatolia because the strata contain clear evidence of compression and extension. During the early-middle Miocene, N–S compression/transpression as well as NE–SW- and NW–SE-oriented oblique conjugate faults formed. NE–SW-oriented horsts and grabens developed, controlled by the dominant NE–SW faults. The Seyitömer and Sabuncup?nar grabens were filled primarily by terrestrial clastic sedimentary and volcanic rocks. At the end of the middle Miocene, the graben fill was locally folded and reverse faulted, reflecting reactivation of compression. Between the late Miocene and the middle Pliocene, the region underwent erosion and lacustrine sediments accumulated in topographic lows. Between the middle and late Pliocene, compression in the region was again reactivated and basal units were thrust over the pre-upper Pliocene units. The late Plio-Quaternary marked the onset of N–S extension and development of the NW–SE-oriented Kütahya Graben, co-genetic equivalents of which are common throughout western Anatolia. This study indicates that tectonic evolution of western Anatolia involved multiple stages of contraction and extension.  相似文献   

16.
  相似文献   

17.
《Geodinamica Acta》2001,14(1-3):31-43
This paper describes the Neogene evolution of northwestern Anatolia based on geological data collected in the course of a new mapping program. The geological history of the region, as recorded by the Neogene sedimentary and magmatic rocks that overlie the Paleozoic–Triassic basement, began after a lake invasion during the Early Miocene period with the deposition of shale-dominated successions. They were accompanied by calc-alkaline intermediate lavas and pyroclastic rocks ejected through NNE trending fractures and faults. The Lower–Middle Miocene successions were deformed under a compressional regime at the end of the Middle Miocene. The deposition of the overlying Upper Miocene–Lower Pliocene successions was restricted to within NE–SW trending graben basins. The graben bounding faults are oblique with a major strike-slip displacement, formed under approximately the N–S extension. The morphological irregularities formed during the Miocene graben formations were obliterated during a severe erosional phase to the end of the deposition of this lacustrine succession. The present E–W graben system as exemplified from the well-developed Edremit graben, postdates the erosional phase, which has formed during the Plio-Quaternary period.  相似文献   

18.
鄂尔多斯盆地周边地带新构造演化及其区域动力学背景   总被引：21，自引：0，他引：21  
系统研究了松辽盆地泰康地区青山口组沉积相类型及沉积特征.对其中青一段与青二、三段的沉积相平面分布与垂向演化规律做了较深入的探讨.青山口组主要发育湖泊相与三角洲相2种沉积相类型,湖泊相包括2种亚相与4种微相,三角洲相包括2种亚相和2种微相.青一段以深湖、半深湖相泥岩沉积为特征,青二、三段以浅湖相与三角洲相砂泥岩互层为特征.区内青山口组主要存在3种类型的储层砂体,分别为三角洲前缘河口坝砂体、三角洲前缘远砂坝砂体和浅湖砂体,其中浅湖砂体是最好的含油砂体,浅湖砂体发育的优势区也即浅湖沉积亚相发育区是区内最重要的油气富集区,是今后油气勘探的有利地区  相似文献   

19.
Small‐mammalian faunas enable the discrimination and correlation of uppermost Lower Miocene lacustrine sedimentary units in central western Anatolia. On the basis of sequential stratigraphic relationships, early Early Miocene and latest Early Miocene relative ages are suggested for the older lacustrine mass‐flow deposits and younger paper shale units, respectively, which are devoid of age‐diagnostic fossils. In central western Anatolia, the sequential differences between the uppermost Lower Miocene successions delineate a deformation zone of NE–SW‐trending fault blocks separated by vertical faults. This deformation zone, inherited from Late Oligocene tectonics, underwent an early Early Miocene sinistral transtension leading to pull‐aparts that were emplaced by granitoids. Limited extension caused the late Early Miocene repetitive up‐ and down‐wards motions of the fault blocks, with variable magnitudes. This led to contrasting subsidence histories in the relevant basinal system. During the latest Early Miocene, fault blocks coalesced into a regional body characterized by uniform slow subsidence and non‐extensional deformation facies. The general trend of the above tectonic events can be explained by lateral slab segmentation and progressive asthenospheric wedging, in response to NE‐directed and decelerated palaeosubduction in the Aegean. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

20.
Kadir Dirik 《Geodinamica Acta》2013,26(1-3):147-158
Abstract

Central Anatolia has undergone complex Neotectonic deformation since Late Miocene-Pliocene times. Many faults and intracontinental basins in this region were either formed, or have been reactivated, during this period. The eastern part of central Anatolia is dominated by a NE-SW-trending, left lateral transcurrent structure named the Central Anatolian fault zone located between Sivas in the northeast and west of Mersin in the southwest. Around the central part, it is characterized by transtensional depressions formed by left stepping and southward bending of the fault zone. Pre-Upper Miocene basement rocks of the region consist of the central Anatolian crystalline complex and a sedimentary cover of Tertiary age. These rock units were strongly deformed by N-S con- vergence. The entire area emerged to become the site of erosion and formed a vast plateau before the Late Miocene. A NE-SW- trending extensional basin developed on this plateau in Late Miocene-Early Pliocene times. Rock units of this basin are characterized by a thick succession of pyroclastic rocks intercalated with calcalkaline-alkaline volcanics. The volcanic sequence is uncon- formably overlain by Pliocene lacustrine-fluviatile deposits interrelated with ignimbrites and tuffs. Thick, coarse grained alluvial/colluvial fan deposits of marginal facies and fine grained elastics and carbonates of central facies display characteristic synsedimentary structures with volcanic intercalations. These are the main lines of evidence for development of a new transtensional H?rka— k?zd?rmak basin in Pliocene times. Reactivation of the main segment of the Central Anatolian fault zone has triggered development of depressions around the left stepping and southward bending of the central part of this sinistral fault zone in the ignimbritic plateau during Late Pliocene-Quaternary time. These transtensional basins are named the Tuzla Gölü and Sultansazl??? pull-apart basins. The Sultansazl??? basin has a lazy S to rhomboidal shape and displays characteristic morphologic features including a steep and stepped western margin, large alluvial and colluvial fans, and a huge composite volcano (the Erciyes Da??).

The geometry of faulting and formation of pull-apart basins can be explained within the framework of tectonic escape of the wedgelike Anatolian block, bounded by sinistral East Anatolian fault zone and dextral North Anatolian transform fault zone. This escape may have been accomplished as lateral continental extrusion of the Anatolian Plate caused by final collision of the Arabian Plate with the Eurasian Plate. © 2001 Éditions scientifiques et médicales Elsevier SAS  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号