共查询到18条相似文献，搜索用时 109 毫秒
1.
吉林中东部季德屯和大石河大型钼矿床流体包裹体特征及地质意义 总被引：2，自引：0，他引：2
季德屯和大石河钼矿是吉林中东部新发现的两个大型钼矿。季德屯钼矿主成矿阶段发育富液相(WL)、富气相(WG)和含CO2相(C型)三种类型流体包裹体,各类包裹体平均盐度为4.8~7.5(wt%,Na Cl)、均一温度为240℃~320℃、成矿压力为73.6~75.5 MPa;晚成矿阶段仅发育富液相(WL)包裹体,包裹体平均盐度为4.5~7.5(wt%,Na Cl)、均一温度为150℃~180℃、成矿压力为43.1~45.1 MPa。大石河钼矿主成矿阶段发育富液相(WL)和含CO2相(C型)两种类型流体包裹体,各类包裹体平均盐度为3.0~6.0(wt%,Na Cl)、均一温度为180℃~330℃、成矿压力为86.4~91.6 MPa;晚成矿阶段仅发育富液两相(WL)包裹体,盐度为1.0~4.0(wt%,Na Cl)、均一温度为160℃~220℃、成矿压力为46.8~48.8 MPa。结合矿床地质特征,确定季德屯钼矿矿床类型为与侵入岩有关的脉状钼矿床,大石河钼矿矿床类型为造山型脉状钼矿床。 相似文献
2.
西藏甲玛铜多金属矿床成因研究——来自流体包裹体的证据 总被引：1，自引：0，他引：1
甲玛铜多金属矿床位于西藏冈底斯斑岩铜矿带东段,是近年来勘探发现的超大型斑岩-矽卡岩型铜多金属矿床。通过冷热台显微观察与测温、扫描电镜、激光拉曼探针测试,对甲玛矿床各成矿阶段典型矿物的流体包裹体研究表明,成矿流体富含挥发分,临界相均一的流体来自岩浆超临界流体出溶,主成矿阶段具有沸腾包裹体组合特征,有机质包裹体荧光效应显著。显微测温结果显示,岩浆-热液阶段斑岩中石英斑晶的流体包裹体均一温度范围为250～540℃,含石盐子晶高盐度包裹体盐度范围为35～61(wt%)NaCl.eq,中等盐度的临界均一的气液包裹体盐度范围为3～29(wt%)NaCl.eq,岩浆期后热液阶段斑岩、角岩中石英脉的流体包裹体均一温度范围为210～410℃,盐度范围为33～41(wt%)NaCl.eq,与其不混溶共生的中低盐度气液两相流体包裹体盐度范围为5～25(wt%)NaCl.eq。矽卡岩阶段矿物均一温度范围为130～360℃,盐度范围为3～41(wt%)NaCl.eq,从岩浆热液过渡阶段到石英-硫化物阶段均一温度与盐度呈阶梯式降低趋势。斑岩体石英的流体包裹体中含有较多黄铜矿子矿物,岩浆结晶分异过程中已经具成矿元素的富集。激光拉曼探针测试结果显示,成矿早期至主成矿期矿物流体包裹体气相成分主要为CO2、CH4和N2,各阶段矿物流体包裹体气相成分具有继承性。成矿流体为高温度高盐度,富含CO2、CH4的流体。成矿流体主要源于岩浆,后期混有大气降水。当岩浆热液上升时因压力的突然释放造成高温含矿热流体发生减压沸腾,CO2和CH4等气体大量逃逸,导致成矿物质快速沉淀。矿床在成因上与岩浆-热液成矿作用密切相关。 相似文献
3.
永平铜多金属矿床位于华南地区十杭裂谷带南侧,是一个与晚侏罗世二长花岗斑岩侵入体有关的斑岩-矽卡岩矿床。矿区存在斑岩型钼矿和矽卡岩型铜矿两种矿化类型。其中,斑岩型钼矿含矿石英脉中主要发育I型气液两相包裹体、II型CO_2三相包裹体和III型含子矿物多相包裹体,早期石英-硫化物阶段流体包裹体的形成温度介于202~359℃之间,盐度介于4.62~36.68 wt%NaCl之间;晚期石英-碳酸盐-硫化物阶段均一温度介于211~318℃之间,盐度范围为2.07~11.47 wt%NaCl。矽卡岩铜矿主要发育I型气液两相包裹体,早期矽卡岩阶段均一温度达到406~486℃,盐度为9.21~9.89 wt%NaCl;石英-硫化物阶段均一温度介于137~335℃之间,盐度值范围为4.98~13.20 wt%NaCl;晚期碳酸盐阶段包裹体均一温度只有89~151℃,盐度范围介于2.07~19.13 wt%NaCl之间。激光拉曼结果显示两者流体包裹体中具有相似的气相成分,都以CO_2和H_2O为主,成矿流体总体上属于H_2O-CO_2-NaCl体系。含Mo成矿流体中存在CH_4,具有低氧逸度特征,在流体演化早期形成Mo矿化中心,石英-硫化物阶段含Mo流体相对于含Cu流体具有更高的温度和压力。矿石中金属硫化物的δ~(34)S值变化于–0.2‰~+1.9‰之间,这表明成矿物质硫源主要来自深源岩浆。结合地质特征,认为该矿床是与晚侏罗世花岗质岩浆密切相关的斑岩钼-矽卡岩铜矿床,铜和钼矿化存在分带现象,岩浆系统的中心部位具有斑岩型钼矿化,外围及和碳酸盐岩的接触带形成斑岩-矽卡岩型铜钨铅锌矿化。 相似文献
4.
姚家沟钼矿是辽宁青城子矿田中近年来发现的钼矿床,位于华北克拉通北缘,燕辽钼成矿带内。姚家沟花岗斑岩岩体中发现的脑状石英细脉(UST)和石英眼是岩浆出溶热液的直接证据。该矿床蚀变分带特征明显,辉钼矿化主要发育在钾化带及矽卡岩化带中。对姚家沟岩体和钾化钼矿带的5期流体活动进行流体包裹体显微观测表明,其流体包裹体类型丰富,包括单相水包裹体(PW)、两相水包裹体(W)、三相CO_2包裹体(C)、纯CO_2包裹体(PC)和含子矿物包裹体(S),S型流体包裹体中子矿物有赤铁矿、黄铜矿和其他未知矿物,但没有石盐子晶。该矿床流体演化为:1)早期石英眼(均一温度为211.4~515.4℃,盐度(w(NaCl))为0.8%~19.2%)的高中温中低盐度富CO_2体系;2)成矿期石英脉(均一温度为179.5~424.5℃,盐度为2.4%~21.5%)的高中温中低盐度NaCl-H_2O-CO_2体系;3)后期石英脉(均一温度为167.8~353.3℃,盐度为3.4%~15.8%)的中低温中低盐度NaCl-H_2O-CO_2体系;4)晚期方解石脉(均一温度为132.5~234.1℃,盐度为0.9%~11.2%)的中低温中低盐度NaCl-H_2O体系;5)UST(均一温度为158.6~381.7℃,盐度为1.6%~21.5%)为中低温中低盐度NaCl-H_2O-CO_2体系,该期可能与钼矿化关系不大,代表另一期侵位更浅的岩浆出溶热液。流体不混溶、围岩蚀变以及流体混合作用导致流体温度、压力降低,CO_2逸失,体系还原性增强,是成矿金属元素沉淀的主要机理。用等容线相交法对成矿期捕获压力进行估算,为124~180 MPa,对应深度为4.6~7.0km,与同成矿带其他钼矿比较,相对较深。 相似文献
5.
浙江建德铜矿(原名岭后铜矿)是20世纪60年代初期探明的中型铜矿,位于扬子板块和华夏板块结合带(即钦杭结合带)北东段。文中系统研究了建德铜矿主成矿期块状矿石石英中的流体包裹体。岩相学研究表明主要发育三类包裹体:包括富液相包裹体(I型),富气相包裹体(II型),以及含子晶包裹体(III型);显微测温结果显示:I类富液相包裹体加热后均一到液相,均一温度分布范围主要集中在280~340℃,流体包裹体盐度0.63~8.00 wt.%Na Cl eqv,II类富气相包裹体加热均一到气相,均一温度296~334℃,盐度1.22~2.00 wt.%Na Cl eqv的低盐度范围,III类含子晶包裹体,均一温度范围与II类包裹体基本相同,介于290~326℃,盐度则较高,介于31.87~38.16 wt.%Na Cl eqv。激光拉曼探针分析揭示,流体挥发分主要为水蒸气,同时部分包裹体气相组分中含有CO2、CH4、N2。II类与III类流体包裹体在视域内共存,且两者均一温度相似,盐度相差很大,表明强烈的流体沸腾作用发生。流体强烈沸腾作用是造成建德铜矿成矿物质沉淀富集的原因。成矿流体研究结合地质特征表明,建德铜矿是燕山期的矽卡岩型矿床而不是海西期的喷流沉积矿床。 相似文献
6.
吉林大黑山超大型钼矿床是中亚--兴蒙造山带东段的斑岩型钼矿床之一,矿体产于燕山期花岗闪长斑岩体和不等粒花岗闪长岩体中,与下古生界头道沟组变质火山岩地层关系密切。流体包裹体研究表明,大黑山钼矿床主要发育气液两相和含子矿物三相两类包裹体。成矿流体反映了较连续的演化过程,成矿早--中阶段发育气液两相水溶液包裹体及含子矿物三相包裹体,均一温度为300 ℃ ～ 460 ℃,流体盐度为1. 7 wt% ～ 49. 92 wt% NaCl eqv,该阶段流体经减压沸腾作用,导致大规模矿质沉淀,为大黑山钼矿床的主成矿阶段; 成矿晚阶段由于大气降水的大量混入,发育气液两相水溶液包裹体,均一温度为196. 5 ℃ ～ 300 ℃,流体盐度为1. 7 wt% ～ 7. 1 wt% NaCl eqv,成矿流体总体上属H2O -- NaCl 体系。流体沸腾作用是金属硫化物大量沉淀的主要机制,该矿床形成于陆缘弧环境。 相似文献
7.
河南省东沟超大型钼矿床流体包裹体研究 总被引：13，自引：6，他引：7
河南省东沟钼矿床是东秦岭钼矿带新发现的燕山期超大型斑岩钼矿床,是大陆碰撞成矿理论预测在先,勘查突破在后的成功范例。该矿床的形成与东沟A型花岗斑岩有关,矿体产于斑岩体外接触带的熊耳群火山岩中。以岩体为中心发育典型的斑岩蚀变分带,由内到外依次是钾化、绢英岩化和青磐岩化。流体成矿过程包括早、中、晚3个阶段,分别以石英-钾长石组合、石英-(钾长石)-多金属硫化物组合和石英-碳酸盐-萤石组合为标志,矿石矿物主要沉淀于中阶段。早、中阶段热液石英中发育CO2-H2O型包裹体(C型)、水溶液包裹体(W型)和含子晶多相包裹体(S型),但晚阶段只发育水溶液包裹体(W型)。早阶段C型和W型包裹体均一温度集中于380~550℃,盐度为7.70%~18.28% NaCleqv;S型包裹体中常见石盐、黄铜矿、方解石和未知透明子矿物,其均一温度范围为318~516℃,加热过程中除石盐外其他子矿物不熔;不包括不熔子矿物的贡献,该类包裹体盐度变化于12.85%~17.87 和35.55%~47.67% NaCleqv。中阶段C型和W型流体包裹体均一温度集中于260~410℃,盐度为4.62%~18.28% NaCleqv;除不熔子矿物外,S型包裹体均一温度为197~436℃,盐度变化于7.45%~19.30% NaCleqv和31.71%~49.22% NaCleqv。晚阶段流体包裹体均一温度集中于125~225℃,盐度介于0.5%~7.25% NaCleqv之间。估算的早、中阶段流体捕获压力分别为63~117MPa和12~67MPa,推测最大成矿深度为4.7km。上述流体包裹体研究表明成矿流体由早阶段高温、富CO2的岩浆热液演化为晚阶段低温、贫CO2的大气降水热液。这种高温、富CO2的岩浆热液可视为大陆内部体制斑岩成矿系统的标志性特征,以区别于岩浆弧区同类矿床高温、贫CO2的岩浆热液。通过对比东秦岭-大别钼矿带典型斑岩成矿系统,认为成矿流体中CO2等挥发组分的含量和围岩性质(化学成分、结晶程度、抗剪抗压程度等)是控制矿体空间定位的重要因素。 相似文献
8.
9.
《矿物岩石》2015,(4)
黑龙江霍吉河钼矿床位于小兴安岭-张广才岭钼矿带北缘,为一典型的大型斑岩型钼矿床,矿体赋存在花岗闪长岩体内。矿床成矿阶段包括石英-黄铁矿、石英-辉钼矿、石英-多金属硫化物以及石英-碳酸盐化4个阶段。对采集的不同成矿阶段样品进行流体包裹体岩相学观察和显微测温发现,流体包裹体的类型有气液两相包裹体、纯气相和纯液相包裹体、少量含子矿物的三相包裹体。流体包裹体的均一温度为114℃~418℃,盐度w(NaCl)为0.71%~47.97%,流体的密度为0.57g/cm~3~1.15g/cm~3,压力为8.31 MPa~49.42 MPa。激光拉曼光谱分析表明,气液两相包裹体成分主要为CO_2。氢氧同位素研究结果显示,成矿流体的δD为-78.4‰~-110‰,δ18 O值为-3.51‰~7.62‰;表明该矿床的成矿流体主要以岩浆水为主,后期有大气水的加入。液相包裹体、气相包裹体和含子矿物三相包裹体密切共存,相同的均一温度范围内,盐度相差较大,表明成矿流体经历了沸腾过程,沸腾作用可能是引起钼等成矿物质沉淀的重要机制。 相似文献
10.
地堡那木岗铜(金)矿床位于西藏多龙矿集区,探明储量达大型规模;矿床的成矿过程分为岩浆作用阶段、钾长石-硫化物阶段、石英-多金属硫化物阶段、碳酸盐-黄铁矿阶段和氧化作用阶段,其中石英-多金属硫化物阶段和碳酸盐-黄铁矿阶段为主要成矿阶段;为查明成矿流体特征,确定矿床成因类型,对取自深部矿石中的碳酸盐脉(均为碳酸盐-黄铁矿成矿阶段含黄铁矿黄铜矿石英脉)开展流体包裹体的岩相学观察和显微测温分析。分析结果表明,上述矿物中主要发育富液相、富气相和含子矿物三相包裹体。其中,富液相包裹体的均一温度与盐度分别为:t=80~600℃、w(NaCl,eq)=4.48%~18.79%;富气相包裹体的均一温度和盐度分别为:t=240~560℃、w(NaCl,eq)=5.09%~9.73%;含子矿物三相包裹体的均一温度与盐度分别为:t=240~560℃、w(NaCl,eq)=36%~72%。综合分析认为,地堡那木岗铜(金)矿床成矿流体发生了强烈的沸腾作用,流体沸腾作用是该矿床的重要成矿机制。通过与国内外典型斑岩型矿床与高硫化型浅成低温热液矿床的流体包裹体特征进行对比,其与斑岩型矿床的中高温、高盐度流体特征相似。因此,推测地堡那木岗矿床的成因类型为斑岩型铜(金)矿床。 相似文献
11.
黑龙江省铜山斑岩铜矿床流体包裹体研究 总被引：14，自引：4，他引：10
铜山大型铜矿床位于小兴安岭西北部,是中亚-兴蒙造山带北东段最著名的斑岩型铜矿床之一,矿体产于加里东期花岗闪长岩和中奥陶世多宝山组安山岩、凝灰岩中,铜矿化与硅化-绢云母化关系密切.流体包裹体研究表明,铜山铜矿床主要发育气液两相包裹体、含CO_2包裹体和含子矿物多相包裹体.成矿流体在形成过程中经历了早、中、晚3个阶段的演化.成矿早阶段发育气液两相水溶液包裹体和少量含子矿物多相包裹体,均一温度介于420℃～＞5500C之间,流体盐度介于13.72 wt%～59.76 wt%NaCl eqv之间;中阶段为铜山矿床的主成矿阶段,发育气液两相水溶液包裹体和含CO_2包裹体,均一温度为241℃～417℃,流体盐度介于2.96 wt%～14.04 wt%NaCl eqv之间,主成矿期成矿流体总体上属H_2O-CO_2-NaCl体系;晚阶段仅发育气液两相水溶液包裹体,均一温度为122℃～218℃,盐度介于3.71 wt%～15.96 wt%NaCl eqv之间,表明晚阶段有大气降水的混入.成矿早、中阶段的流体均为不混溶流体,流体沸腾作用是金属硫化物大量沉淀的主要机制.铜山矿床形成于陆缘弧环境. 相似文献
12.
Liangliang Yu Deru Xu Weixin Chen Bo Zhang Lihui Tian Qiang Shan 《Resource Geology》2020,70(4):336-347
The late Triassic Baolun gold deposit hosted by Silurian phyllites is a large‐scale high‐grade gold deposit in Hainan Island, South China. The ores can be classified into quartz‐vein dominated type and less altered rock type. Three mineralization stages were recognized by mineral assemblages. The early stage, as the most important mineralization stage, is characterized by a quartz–native gold assemblage. The muscovite?quartz?pyrite?native gold assemblage is related to the intermedium mineralization stage. In late mineralization stage, native gold and Bi‐bearing minerals are paragenetic minerals. Microthermometry analyses show that the early mineralization stage is characterized by two types of fluid inclusions, including CO2‐rich inclusions (C‐type) and aqueous inclusions (W‐type). C‐type inclusions homogenize at 276–335°C with an averaged value of 306°C and have salinities of 1.0–10.0 wt% NaCl equivalent (mean value of 4.9 wt% NaCl equivalent). W‐type inclusions homogenize at 252–301°C (mean value of 278°C) with salinity of 4.0–9.7 wt% NaCl equivalent (mean value of 7.4 wt% NaCl equivalent). In intermedium mineralization stage, C‐type and W‐type inclusions homogenize at 228–320°C (mean value of 283°C) and 178–296°C (mean value of 241°C), with salinities of 2.4–9.9 wt% NaCl equivalent (mean value of 6.5 wt% NaCl equivalent) and 3.7–11.7 wt% NaCl equivalent (mean value of 7.7 wt% NaCl equivalent), respectively. No suitable mineral, such as quartz or calcite, was found for fluid inclusion study from late mineralization stage. In contrast, only aqueous inclusions were found from post‐ore barren veins, which yielded lower homogenization temperatures ranging from 168–241°C (mean value of 195°C) and similar salinities (2.6–12.6 wt% NaCl equivalent with averaged value of 7.2 wt% NaCl equivalent). The different homogenization temperatures and similar salinities of C‐type and W‐type from each mineralization stage indicate that fluid immiscibility and boiling occurred. The Baolun gold deposit was precipitated from a CO2‐bearing mesothermal fluid, and formed at a syn‐collision environment following the closure of the Paleo‐Tethys. 相似文献
13.
Hydrothermal alteration and mineralization at the Wunugetu porphyry Cu–Mo deposit, China, include four stages, i.e., the early stage characterized by quartz, K-feldspar and minor mineralization, followed by a molybdenum mineralization stage associated with potassic alteration, copper mineralization associated with sericitization, and the last Pb–Zn mineralization stage associated with carbonation. Hydrothermal quartz contains three types of fluid inclusions, namely aqueous (W-type), daughter mineral-bearing (S-type) and CO2-rich (C-type) inclusion, with the latter two types absent in the late stage. Fluid inclusions in the early stage display homogenization temperatures above 510°C, with salinities up to 75.8 wt.% NaCl equivalent. The presence of S-type inclusions containing anhydrite and hematite daughter minerals and C-type inclusions indicates an oxidizing, CO2-bearing environment. Fluid inclusions in the Mo- and Cu-mineralization stages yield homogenization temperatures of 342–508°C and 241–336°C, and salinities of 8.6–49.4 and 6.3–35.7 wt.% NaCl equivalent, respectively. The presence of chalcopyrite instead of hematite and anhydrite daughter minerals in S-type inclusions indicates a decreasing of oxygen fugacity. In the late stage, fluid inclusions yield homogenization temperatures of 115–234°C and salinities lower than 12.4 wt.% NaCl equivalent. It is concluded that the early stage fluids were CO2 bearing, magmatic in origin, and characterized by high temperature, high salinity, and high oxygen fugacity. Phase separation occurred during the Mo- and Cu-mineralization stages, resulting in CO2 release, oxygen fugacity decrease and rapid precipitation of sulfides. The late-stage fluids were meteoric in origin and characterized by low temperature, low salinity, and CO2 poor. 相似文献
14.
山西中条山铜矿峪铜矿流体演化特征 总被引：1，自引：0，他引：1
铜矿峪铜矿大地构造位置位于华北克拉通中部造山带南部,主容矿围岩为花岗闪长斑岩、二长花岗岩及变质基性火山岩。对不同阶段石英流体包裹体进行了包裹体岩相学、显微测温学和激光拉曼显微探针研究。结果表明,成矿流体包裹体可分为气液两相包裹体、含多子晶包裹体、含石盐子晶包裹体、含CO2 包裹体及纯CO2 包裹体。其中早阶段以富含多子晶包裹体( 均一温度为436. 2 ℃ ～ ＞ 550 ℃,盐度( w ( NaCl) ) 为49. 34% ～ ＞ 62%) 和含石盐子晶包裹体( 均一温度为345. 6 ℃ ～ ＞ 550 ℃,盐度( w ( NaCl) ) 为29. 72% ～ ＞ 62%) 为主。主成矿阶段主要由含石盐子晶包裹体( 均一温度为169. 1 ℃ ～ 324. 9 ℃,盐度( w ( NaCl) ) 为30. 47% ～ 39. 75%) 、气液两相包裹体( 均一温度介于159. 9 ℃ ～ 242. 9 ℃,盐度( w ( NaCl) ) 为1. 56% ～ 22. 31%) 组成并发现少量含CO2 包裹体 ( 均一温度为259. 7 ℃ ～ 320. 5 ℃,盐度( w ( NaCl) ) 为8. 93% ～ 13. 16%) 和纯CO2 包裹体( CO2 均一温度为24. 3 ℃ ～ 27. 22 ℃) 。晚成矿阶段仅发育气液两相包裹体( 均一温度为126. 9 ℃ ～ 212. 3 ℃,盐度( w ( NaCl) ) 为1. 56% ～ 7. 44 %) 。激光拉曼光谱分析包裹体气相成分主要为H2O、CO2、 HF 组成,晚期为CO2、N2。包裹体中普遍存在CO2。早阶段流体应为高温高盐高氧逸度NaCl － H2O － CO2 体系。主成矿阶段含气液两相包裹体与富CO2 相包裹体共存,表明流体发生了不混溶或沸腾现象。成矿晚阶段低温低盐度气液两相包裹体可能来源于大气降水。分析认为,铜矿峪铜矿成因类型属斑岩型。 相似文献
15.
Classic porphyry Cu–Mo deposits are mostly characterized by close temporal and spatial relationships between Cu and Mo mineralization. The northern Dabate Cu–Mo deposit is a newly discovered porphyry Cu–Mo polymetallic deposit in western Tianshan, northwest China. The Cu mineralization postdates the Mo mineralization and is located in shallower levels in the deposit, which is different from most classic porphyry Cu–Mo deposits. Detailed field investigations, together with microthermometry, laser Raman spectroscopy, and O‐isotope studies of fluid inclusions, were conducted to investigate the origin and evolution of ore‐forming fluids from the main Mo to main Cu stage of mineralization in the deposit. The results show that the ore‐forming fluids of the main Mo stage belonged to an NaCl + H2O system of medium to high temperatures (280–310°C) and low salinities (2–4 wt% NaCl equivalent (eq.)), whereas that of the main Cu stage belonged to an F‐rich NaCl + CO2 + H2O system of medium to high temperatures (230–260°C) and medium to low salinities (4–10 wt% NaCl eq.). The δ18O values of the ore‐forming fluids decrease from 3.7–7.8‰ in the main Mo stage to ?7.5 to ?2.9‰ in the main Cu stage. These data indicate that the separation of Cu and Mo was closely related to a large‐scale vapor–brine separation of the early ore‐forming fluids, which produced the Mo‐bearing and Cu‐bearing fluids. Subsequently, the relatively reducing (CH4‐rich) Mo‐bearing, ore‐forming fluids, dominantly of magmatic origin, caused mineralization in the rhyolite porphyry due to fluid boiling, whereas the relatively oxidizing (CO2‐rich) Cu‐bearing, ore‐forming fluids mixed with meteoric water and precipitated chalcopyrite within the crushed zone at the contact between rhyolite porphyry and wall rock. We suggest that the separation of Cu and Mo in the deposit may be attributed to differences in the chemical properties of Cu and Mo, large‐scale vapor–brine separation of early ore‐forming fluids, and changes in oxygen fugacity. 相似文献
16.
Geological and fluid inclusion studies of the Dongpo tungsten skarn ore deposit,China 总被引：1，自引：0，他引：1
The Dongpo tungsten ore deposit, the largest scheelite skarn deposit in China, is located at the contact of a 172-m. y. biotite
granite with a Devonian marble. The mineralization associated with the granite includes W, Bi-Mo, Cu-Sn and Pb-Zn ores. Several
W mineralization stages are shown by the occurrence of ore in massive skarn deposits and in later cross-cutting veins. The
high garnet/pyroxene ratio, the hedenbergite and diopside-rich pyroxene and the andradite-rich garnet show the deposit belongs
to the oxidized skarn type. Detailed fluid inclusion studies of granite, greisen, skarn and vein samples reveal three types
of fluid inclusion: (1) liquid-rich, (2) gas-rich and (3) inclusions with several daughter minerals. Type (3) is by far the
most common in both skarn and vein samples. The dominant daughter mineral in fluid inclusions is rhembic, highly birefringent,
and does not dissolve on heating even at 530°C. We assume that this mineral is calcite. The liquid phase in most of the fluid
inclusions has low to moderate salinities: 0–15 wt. %; in a few has higher salinities (30–40 wt. % NaCl equivalent). The homogenization
temperatures of inclusions in the skarn stage range from 350°C to 530°C, later tungsten mineralization-stage inclusions homogenize
between 200°C and 300°C, as do inclusions in veins. Fluid inclusions in granite and greisen resemble those of the late tungsten
mineralization stage, with low salinity and homogenization temperatures of 200°–360°C. The tungsten-forming fluids are probably
a mixture that came from biotite granite and the surrounding country rocks. 相似文献
17.
新疆东准噶尔南明水金矿床位于卡拉麦里成矿带东段,矿体受NW—NWW向韧-脆性断裂控制,赋矿围岩为下石炭统姜巴斯套组的浅变质海相火山碎屑-沉积岩。以流体包裹体和氢、氧同位素为研究手段,查明了矿床成矿流体性质、来源及其演化特征与金成矿的关系。其热液成矿过程可划分早、中、晚3个阶段,石英中原生包裹体主要有CO2-H2O包裹体、水溶液包裹体和纯CO2包裹体3种类型。早阶段石英中以CO2-H2O包裹体和纯CO2包裹体为主,均一温度变化于257~339 ℃,盐度为04%~22%;中阶段石英中3种类型包裹体均发育,CO2-H2O包裹体和水溶液包裹体均一温度为196~361 ℃,盐度为04%~60%;晚阶段石英中仅见水溶液包裹体,均一温度相对较低,为174~252 ℃,盐度为14%~32%。由CO2-H2O包裹体计算的早、中阶段捕获压力分别为214~371 MPa、236~397 MPa,对应的成矿深度分别为81~140 km、89~150 km。成矿流体由早、中阶段的CO2-H2O-NaCl±CH4体系演化至晚阶段贫CO2的H2O-NaCl体系,成矿温度和流体密度呈逐渐降低趋势,盐度变化不大。流体包裹体和氢、氧同位素研究表明,主成矿阶段成矿流体主要来源于变质水,CO2-H2O-NaCl流体的不混溶是导致Au富集成矿的重要机制,南明水金矿属于中深成造山型金矿床。 相似文献
18.
The Haobugao deposit, located in the southern segment of the Great Xing'an Range, is a famous skarn‐related Pb‐Zn‐(Cu)‐(Fe) deposit in northern China. The results of our fluid inclusion research indicate that garnets of the early stage (I skarn stage) contain three types of fluid inclusions (consistent with the Mesozoic granites): vapor‐rich inclusions (type LV, with VH2O/(VH2O + LH2O) < 50 vol %, and the majority are 5–25 vol %), liquid‐rich two‐phase aqueous inclusions (type VL, with VH2O/(VH2O + LH2O) > 50 vol %, the majority are 60–80 vol %), and halite‐bearing multiphase inclusions (type SL). These different types of fluid inclusions are totally homogenized at similar temperatures (around 320–420°C), indicating that the ore‐forming fluids of the early mineralization stage may belong to a boiling fluid system. The hydrothermal fluids of the middle mineralization stage (II, magnetite‐quartz) are characterized by liquid‐rich two‐phase aqueous inclusions (type VL, homogenization temperatures of 309–439°C and salinities of 9.5–14.9 wt % NaCl eqv.) that coexist with vapor‐rich inclusions (type LV, homogenization temperatures of 284–365°C and salinities of 5.2–10.4 wt % NaCl eqv.). Minerals of the late mineralization stage (III sulfide‐quartz stage and IV sulfide‐calcite stage) only contain liquid‐rich aqueous inclusions (type VL). These inclusions are totally homogenized at temperatures of 145–240°C, and the calculated salinities range from 2.0 to 12.6 wt % NaCl eqv. Therefore, the ore‐forming fluids of the late stage are NaCl‐H2O‐type hydrothermal solutions of low to medium temperature and low salinity. The δD values and calculated δ18OSMOW values of ore‐forming fluids of the deposit are in the range of ?4.8 to 2.65‰ and ?127.3‰ to ?144.1‰, respectively, indicating that ore‐forming fluids of the Haobugao deposit originated from the mixing of magmatic fluid and meteoric water. The S‐Pb isotopic compositions of sulfides indicate that the ore‐forming materials are mainly derived from underlying magma. Zircon grains from the mineralization‐related granite in the mining area yield a weighted 206Pb/238U mean age of 144.8 ±0.8 Ma, which is consistent with a molybdenite Re‐Os model age (140.3 ±3.4 Ma). Therefore, the Haobugao deposit formed in the Early Cretaceous, and it is the product of a magmatic hydrothermal system. 相似文献