共查询到20条相似文献，搜索用时 156 毫秒
1.
逆冲拆离断层系统又称薄皮构造，一般可分为根带、中带、前锋带及外缘带四个部分。其前锋带又可划分出滑脱型、褶皱型、前冲型和反冲型等几类构造样式，各类构造样式还可再分成若干种。例举了各种中国西部存在的典型构造样式。在库车盆地还发现双重滑脱逆冲拆离断层前锋构造存在，在其他盆地仅发现单层逆冲拆离断层前锋带的构造样式。逆冲滑脱拆离断层前锋带构造环境中油气丰富(典型的如克拉2气田)，具有良好的勘探前景。 相似文献
2.
3.
逆冲拆离断层系统又称薄皮构造，一般可分为根带、中带、前锋带及外缘带四个部分。其前锋带又可划分出滑脱型、褶皱型、前冲型和反冲型等几类构造样式，各类构造样式还可再分成若干种。例举了各种中国西部存在的典型构造样式。在库车盆地还发现双重滑脱逆冲拆离断层前锋构造存在，在其他盆地仅发现单层逆冲拆离断层前锋带的构造样式。逆冲滑脱拆离断层前锋带构造环境中油气丰富(典型的如克拉2气田)，具有良好的勘探前景。 相似文献
4.
利用地震资料、油气勘探资料分析了南海北部大陆边缘珠江口-琼东南新生代盆地断裂系统的时空差异及动力学成因机制.珠江口-琼东南盆地古近系裂陷构造层以NE向、近EW向基底正断层构成的伸展断裂系统的几何学、运动学沿着盆地走向有明显变化,盆地内部隐伏的区域性和局部的NW向断裂及相关构造变形带构成伸展断裂系统之间的构造变换带.在空间上,区域性的云开、松涛-松南等NW向构造变换带以西为NE-NEE向正断层构成的"非拆离"伸展断层系,以东为NE向正断层、近EW向正断层(走滑正断层)复合而成的拆离伸展断层系.在时间上,古近纪裂陷作用可划分为早(文昌组沉积期)、中(恩平组/崖城组沉积期)、晚(珠海组/陵水组沉积期)3个有明显差异的裂陷期.裂陷早期,盆地西部以平面式正断层控制的简单地堑、半地堑为主,伸展量相对较小,东部则以铲式正断层控制的复式地堑、半地堑为主,伸展量相对大,断层向深部收敛在中地壳韧性层构成拆离的伸展断层系统.裂陷中期,琼东南盆地、珠江口盆地西部断裂具有继承性活动特点,珠江口盆地东部发育NWW-EW向伸展断层,并向深层切割早期浅层拆离断层,形成深层拆离伸展断层系统,而沿着云开构造变换带发育反转构造.裂陷晚期,琼东南盆地、珠江口盆地西部断裂具有活动性减弱特点,琼东南盆地东部发育NWW-EW向伸展断层,形成深层拆离伸展断层系统,而沿着琼中央构造变换带发育反转、走滑构造.珠江口-琼东南盆地不同区段断裂系统及其构造演化的差异性受盆地基底先存构造、地壳及岩石圈结构及伸展量等多方面因素的影响,拆离伸展断层系统与发育NWW向"贯穿"断裂的基底构造薄弱带、现今地壳局部减薄带相关,南海扩展由东而西的迁移诱导北部大陆边缘块体沿着先存NW向深大断裂发生走滑旋转是导致变换构造带两侧差异伸展的动力学原因,应力场及岩石圈热结构变化是引起拆离断层深度变化的重要因素. 相似文献
5.
冀中坳陷中区中生代中晚期大型拆离滑覆构造的确定 总被引：8，自引：2，他引：6
晚侏罗世至早白垩世 ,太行地区受区域热构造事件的影响 ,燕山期的岩浆活动达到高潮 ,并由此引发了阜平、赞皇变质核杂岩的强烈拱升及浅层的侧向伸展拆离作用 ,在阜平变质核杂岩东侧的冀中坳陷中区形成了西部伸展而东部挤压的有机相连、有序发展的拆离滑覆构造体系 ,波及宽度达 1 5 0km。其后缘伸展区表现为变质核杂岩内的韧性剪切带、盖层内的拆离伸展断层及伴随的断陷盆地 ;而前缘挤压区形成叠瓦状逆冲推覆构造体系 ;介于二者之间的中部过渡带构造变形相对较弱 相似文献
6.
东秋里塔格构造带是塔里木盆地库车坳陷的前缘构造带,整体表现为受新近系吉迪克组膏盐岩滑脱层控制的分层变形构造特征。盐上构造层主要发育断层相关褶皱,盐岩层以塑性流动变形为主,盐下构造层发育断层相关褶皱、冲起构造、逆冲断块等多种构造样式。依据盐下构造层变形特征,自西向东将东秋里塔格构造带划分为过渡构造段、叠瓦扇构造段、前端冲起构造段以及后端冲起构造段四段。过渡构造段内膏盐岩层发育层位由库姆格列木群转变为吉迪克组,盐下发育叠瓦扇构造;叠瓦扇构造段盐下发育典型的逆冲叠瓦构造样式;前端冲起构造段盐下发育断弯褶皱背斜,并在反冲断层的复合作用下发生冲起,主逆冲断层之下发育次级逆冲夹片;后端冲起构造段盐下发育断弯褶皱,并在背斜北翼发育一个独立的冲起构造。东秋里塔格构造带具备有利生储条件,构造分析表明过渡构造段、叠瓦扇构造段以及前端冲起构造段的盐下次级逆冲夹片具备勘探潜力,是有利的油气勘探区带。 相似文献
7.
冷湖五号燕山期叠瓦逆冲构造的发现 总被引：1，自引：0，他引：1
笔者通过钻井、电测、地震等资料的解释，在柴达木盆地冷湖五号背斜核部的下侏罗统中发现了叠瓦逆冲构造，并认为其形成于燕山运动晚期。该发现对认识本区燕山运动的性质和正确评价本区的石油及煤炭资源有重要意义。冷湖五号中新生代的构造发育历史可划分为5个阶段，即早株世伸展裂陷阶段、燕山晚期叠瓦逆冲构造发育阶段、早第三纪早期同生逆断层发育阶段、早第三纪晚期至晚第三纪中期背斜构造发育阶段和晚第三纪晚期至第四纪背斜构造改造阶段。 相似文献
8.
青藏高原中部色林错—伦坡拉逆冲推覆构造系统 总被引：1，自引：0，他引：1
通过野外地质观测结合地震反射剖面综合构造解释,在青藏高原中部色林错—伦坡拉古近纪沉积凹陷及邻区厘定3条较大规模的逆冲推覆构造,由逆冲断层、逆冲岩席、飞来峰、构造窗及伴生褶皱组成。沿班公—怒江缝合带发育赛布错—扎加藏布逆冲推覆构造,伦坡拉盆地北部发育双重推覆构造,拉萨地块北缘发育色林错—吴如错逆冲推覆构造,估算推覆距离分别为38~50 km。羌塘地块南缘自北向南逆冲推覆,拉萨地块北缘自南向北逆冲推覆,两者对冲导致色林错古近纪盆地及沉积地层发生比较强烈的褶皱变形,形成宽约20 km大型向斜构造。色林错—伦坡拉逆冲推覆构造运动开始时间为晚白垩世晚期,古近纪不同时期均发育逆冲断层,前锋逆冲断层和底部拆离滑脱构造主要形成时期为古近纪晚期—中新世早期。古近纪逆冲推覆构造对伦坡拉和色林错河湖相沉积盆地、烃源岩形成演化、油气成藏及保存条件具有显著控制作用。 相似文献
9.
论内蒙古大青山地区逆冲推覆构造 总被引：17，自引：0，他引：17
大青山逆冲推覆构造发育在石拐断陷盆地南侧,由一系列规模大涉等向南倾的叠瓦状逆冲推覆断层构成,由南南西向北北东方向推覆,是单冲型逆推覆构造。由北向南分为前缘挤压滑构造带、斜歪倒转褶皱逆冲断层带和逆冲推覆岩席及叠瓦状逆冲断层带。 相似文献
10.
英吉苏凹陷中-新生代背驮式前陆盆地构造特征及成因机制 总被引：4，自引：0，他引：4
英吉苏中新生代凹陷是在古生代逆冲推覆构造背景之上发育起来的背驮式前陆盆地.盆地的沉积作用和变形作用严格受基底参与的逆冲断层的控制.中新生代构造由北向南可划分七个带北部斜坡带;群克-新开屏背斜带;英北向斜带;阿拉干背斜带;英南向斜带;古城墟斜坡带和罗布庄断凸带.叠瓦式逆冲断层、冲起构造、构造三角带、断展褶皱和披覆构造是英吉苏凹陷的主要变形样式.自三叠纪以来,不同时期的沉积中心自造山带向前陆方向迁移.中新生界变形的动力学和运动学是与塔里木板块南缘活动大陆边缘的板块拼贴事件和壳内拆离缩短作用有关. 相似文献
11.
野外地质调查和剖面测量揭示:郁江断层带的轨迹结构整体上表现为南北分段、东西分带的后展式叠瓦状逆冲断层结构;其中,底板缓倾角逆冲断层多层次(区域尺度、露头尺度和微观尺度)的断坪、断坡轨迹,特别是沿断坡方向的破裂分解,是分支断层呈上叠后展式扩展增殖的基础。根据运动学标志,郁江逆冲断层从北西向南东逆冲,最大断距小于1km,一般断距为10～100m级;后缘高倾角正断层的累计断距与前缘逆冲断距基本对应。结合区域构造分析,郁江逆冲断层轨迹结构定型于燕山期,轨迹扩展过程表现为:上叠分支断层沿底板逆冲断层的断坡方向逐次从前缘向后缘扩展增殖,属于典型的上叠后展式逆冲扩展结构;其中,后缘正断层的形成是断层轨迹结构反馈、运动调整和断层自组织行为的必然结果;而喜马拉雅主期区域应力场的激发,只是强化和加速了后缘正断层的扩展规模和进程。 相似文献
12.
渤海湾盆地基岩地质图及其所包含的构造运动信息 总被引：10，自引：1，他引：9
利用油气勘探资料编制的渤海湾盆地基岩地质图 ,分析了基岩露头分布及其反映的中、新生代构造运动特征。基岩地质图显示渤海湾盆地基底岩层受印支运动和燕山运动影响发育有一系列近EW向、NNE—NE向的褶皱和逆断层等挤压构造变形。基岩露头展布表明渤海湾盆地西部、北部在侏罗纪之前的剥蚀作用明显强于东部和南部地区。基岩地层形成的区域褶皱轴向及各亚构造层之间的不整合面接触关系反映出在下—中三叠统沉积之后至下—中侏罗统沉积之前的某个“关键时刻”渤海湾地区发生了一次重要的构造变革 ,导致早期的近EW向构造被NNE—NE向构造替代。而从区域应力体制来看 ,下—中侏罗统沉积之后渤海湾地区的区域构造环境发生了重要变化 ,从中生代早期的挤压构造环境变为以裂陷作用为主的构造演化时期 相似文献
13.
Evidence for Neotethys rooted within the Vardar suture zone from the Voras Massif, northernmost Greece 总被引：2，自引：0，他引：2
Three conflicting models are currently proposed for the location and tectonic setting of the Eurasian continental margin and adjacent Tethys ocean in the Balkan region during Mesozoic–Early Tertiary time. Model 1 places the Eurasian margin within the Rhodope zone relatively close to the Moesian platform. A Tethyan oceanic basin was located to the south bordering a large “Serbo-Pelagonian” microcontinent. Model 2 correlates an integral “Serbo-Pelagonian” continental unit with the Eurasian margin and locates the Tethys further southwest. Model 3 envisages the Pelagonian zone and the Serbo-Macedonian zone as conjugate continental units separated by a Tethyan ocean that was sutured in Early Tertiary time to create the Vardar zone of northern Greece and former Yugoslavia. These published alternatives are tested in this paper based on a study of the tectono-stratigraphy of a completely exposed transect located in the Voras Mountains of northernmost Greece. The outcrop extends across the Vardar zone, from the Pelagonian zone in the west to the Serbo-Macedonian zone in the east.Within the Voras Massif, six east-dipping imbricate thrust sheets are recognised. Of these, Units 1–4 correlate with the regional Pelagonian zone in the west (and related Almopias sub-zone). By contrast, Units 5–6 show a contrasting tectono-stratigraphy and correlate with the Paikon Massif and the Serbo-Macedonian zone to the east. These units form a stack of thrust sheets, with Unit 1 at the base and Unit 6 at the top. Unstacking these thrust sheets places ophiolitic units between the Pelagonian zone and the Serbo-Macedonian zone, as in Model 3. Additional implications are, first, that the Paikon Massif cannot be seen as a window of Pelagonian basement, as in Model 1, and, secondly, Jurassic andesitic volcanics of the Paikon Massif locally preserve a gneissose continental basement, ruling out a recently suggested origin as an intra-oceanic arc.We envisage that the Almopias (Vardar) ocean rifted in Triassic time, followed by seafloor spreading. The Almopias ocean was consumed beneath the Serbo-Macedonian margin in Jurassic time, generating subduction-related arc volcanism in the Paikon Massif and related units. Ophiolites were emplaced onto the Pelagonian margin in the west and covered by Late Jurassic (pre-Kimmeridgian) conglomerates. Other ophiolitic rocks formed within the Vardar zone (Ano Garefi ophiolite, Unit 4) in latest Jurassic–Early Cretaceous time and were not deformed until Early Tertiary time. The Vardar zone finally sutured in the Early Tertiary creating the present imbricate thrust structure of the Voras Mountains. 相似文献
14.
河北省北部兴隍-平泉复向斜的西端发育了一种特殊类型的推覆构造,该推覆构造具有三重结构的特点,即由上叠瓦扇、下叠瓦扇和下伏系统组成。上叠瓦扇可以分为被分支断裂分割的太古字、长城系、蓟县系、青白口系和寒武-奥陶系5个逆冲岩席;各分支断裂上陡下缓,向下逐渐归并于F1主逆冲断裂上。F1断层下的石炭-二叠系也发育了一组叠瓦状逆冲断层,形成了与上叠瓦扇具有不同变形特征的下叠瓦扇。由于这一构造特殊的两套叠瓦扇结构,故笔者称其为复式叠瓦扇构造,这是一种新的推覆构造类型。 相似文献
15.
J.S. Oldow 《Journal of Structural Geology》1981,3(1):39-49
The northern Pilot Mountains of west-central Nevada, consist of a complexly deformed terrane of imbricate thrust nappes composed of rocks of Permian(?), Triassic through Jurassic, and possible Cretaceous ages. Three episodes of fold and thrust generation are recognized on the basis of folded thrusts and thrusted folds, and deformation and emplacement of the nappes is constrained as having occurred during the late Mesozoic. Folds are apparently coeval with thrust faults, and fold geometry is used in determining approximate directions of thrust displacement. The history of thrust displacement is complex and involves three directions of motion on a regionally extensive detachment surface, the Luning thrust. The first motion, from NW to SE, results in displacements of the order of several tens of kilometres and is the probable result of NW-SE regional compression. The final two episodes of motion are NE-SW followed by E-W; they result in small displacements and are possibly the product of gravity sliding of the thrust sheet into depressions in the autochthon. Sites of downwarp in the autochthon may have been formed either by load induced subsidence or regional compression. 相似文献
16.
本文对横切沧东断裂带的２３条地地震剖面进行了分析解，计算出各剖面的地层厚度和断距，并结合重、磁资料，对沧东断裂带和黄骅坳陷西部的构造演化进行了定理研究，发育特征为：沧东断裂带在时间演化上可分为四期，空间演化上可分为六段，且控制了黄骅坳陷西部的反转构造；沧东断裂带作为黄骅坳陷的西界断裂，在中生代早中期为逆冲断层，中生代晚期至新生代转为正断层，它控制了坳陷的构造演化，对油气运移和富集起重要作用；盆地中发育的NWW 向断层在构造样式转换中起重要的调节作用。 相似文献
17.
Detailed subsurface structure of the eastern Junggar Basin is investigated using a large number of high-resolution two-dimensional reflection seismic profiles and well data. Our results reveal thrust faults, some of which are with strike-slip component, and fault-related folds dominating the subsurface structure of the study area. The thrust faults mainly show a divergent pattern towards the west and convergence towards the east. We divide these thrust faults and folds into three structural systems. The north thrust system, located in the north of the study area, is characterized by top-to-the southwest imbricate thrusts initiated from late Paleozoic. The central transpression system, dominating the central study area, mainly consists of thrust faults with visible strike-slip component, active from early Mesozoic until Cretaceous. The South thrust system includes top-to-the southeast thrusts in the southern part of the study area. The existence of these structural systems indicates that the eastern Junggar Basin underwent obvious intracontinental deformation in Mesozoic, probably due to the continuous convergence between the Altay and the Tianshan orogens after the main collision-accretion processes of the Central Asian Orogenic Belt. 相似文献
18.
Enrico Tavarnelli 《地学学报》1996,8(1):65-74
The Umbria-Marche-Sabina foreland fold and thrust belt (Northern Apennines, Italy) provides excellent test-cases for the hypothesis of ancient syndepositional structural features controlling thrust ramp development. The sedimentary cover, Late Triassic to Miocene in age, is made of platform and pelagic carbonates, whose deposition was controlled by significant synsedimentary extension. Normal faulting, mainly during the Jurassic and the Late Cretaceous-Palaeogene, determined sensible lateral thickness variations within the relative sequences. By late Miocene the sedimentary cover was detached from its basement along a mainly evaporitic horizon, and was deformed by means of eastward-verging folds and thrusts.
In order to locate the points where thrust ramps branch-off the basal detachment, both line-length and equal-area techniques were used in the construction of a balanced cross-section through three major fault-related folds in southeastern Umbria. The nucleation of thrust ramps was controlled by the occurrence of Jurassic and Cretaceous-Palaeogene synsedimentary normal faults. These interrupted the lateral continuity of the evaporitic unit (the Late Triassic Anidriti di Burano Fm.) at the base of the sedimentary cover, and acted as obstacles to the eastward propagation of the thrust system, giving rise to major folds which originated from tip-line folding processes.
Therefore, the inferred relationships between ancient normal faults and late thrusts indicate that synsedimentary tectonic structures and the related lateral stratigraphic variations can be envisaged as mechanically important perturbations, which effectively control the nucleation and development of thrust ramps. 相似文献
In order to locate the points where thrust ramps branch-off the basal detachment, both line-length and equal-area techniques were used in the construction of a balanced cross-section through three major fault-related folds in southeastern Umbria. The nucleation of thrust ramps was controlled by the occurrence of Jurassic and Cretaceous-Palaeogene synsedimentary normal faults. These interrupted the lateral continuity of the evaporitic unit (the Late Triassic Anidriti di Burano Fm.) at the base of the sedimentary cover, and acted as obstacles to the eastward propagation of the thrust system, giving rise to major folds which originated from tip-line folding processes.
Therefore, the inferred relationships between ancient normal faults and late thrusts indicate that synsedimentary tectonic structures and the related lateral stratigraphic variations can be envisaged as mechanically important perturbations, which effectively control the nucleation and development of thrust ramps. 相似文献
19.
自中三叠世扬子与华北板块发生碰撞—深俯冲作用以来,大别造山带南界上的襄樊—广济断裂带主要经历过两次变形事件: 1)早期变形事件发生在中三叠世末—晚三叠世初的造山带折返阶段,表现为造山带南边界上的韧性剪切带。这期北西—南东走向的剪切带向南西陡倾,发育北西—南东向的矿物拉伸线理,主要为右行走滑的运动性质,属于造山带斜向折返的侧边界走滑剪切带。造山带折返过程中将前陆褶断带北缘原先东西向褶皱改造为北西—南东走向。2)晚期变形事件发生在晚侏罗世,表现为脆性逆冲断层,使得前陆褶断带向北东逆冲在造山带南缘之上,同时在前陆上形成了一系列的逆冲断层。该断裂带的晚期逆冲活动与郯庐断裂带左行平移同时发生,代表了滨太平洋构造活动的开始。 相似文献
20.
华北东部地区中生代盆地格局及演化过程探讨 总被引：29，自引：11，他引：18
华北东部中生代盆地演化受控于欧亚构造域的板块挤压拼接和滨太平洋构造域"洋-陆"俯冲碰撞两大动力学背景,与兴蒙造山带、秦岭-大别造山带、太行山隆起及郯庐断裂带等陆内及周边造山带的形成、深大断裂发育演化以及深部动力等因素有着密切的联系。早-中三叠世华北地区基本继承了晚海西期以来的构造格局和沉积特点,地势北西高、东南低,为一南陡北缓、呈NWW向展布的大型内陆沉积盆地;晚三叠世扬子板块与华北板块剪刀式碰撞拼接,华北地区全面抬升,且西部抬升小,东部抬升幅度大,盆地范围向西部退缩,沉积范围缩小,东部地区地势较高,地貌复杂,以隆升剥蚀为主;早-中侏罗世华北东部处于由古亚洲构造域向滨太平洋构造域演化的过渡阶段,该时期太行山的形成将华北地区分割成东、西两个大盆,西部鄂尔多斯盆地依然为一个大型沉积盆地,东部渤海湾盆地区在早-中侏罗世的早期为一些小的山间沉积盆地群,主要表现为对印支期造成的大量NWW或近EW向逆冲断层及阔缓褶皱所产生的低洼地区的充填,晚期则表现为披覆式沉积;晚侏罗世-早白垩世太平洋板块活动取代了扬子板块、西伯利亚板块活动对华北地区构造演化的控制地位,中国东部进入大规模的裂陷或断陷盆地发育阶段,且出现了明显的分区性:在盐山-歧口-新港-兰考-聊城断裂系以东,由于受郯庐断裂带左旋走滑构造应力场的控制,主要发育NW或NWW向断陷盆地,而在该断裂系以西至太行山以东的地区,受左旋走滑影响较弱,主要发育NE和NNE向断陷盆地,在张家口-蓬莱走滑断裂带以北的下辽河坳陷区,盆地的长轴方向为NNE,属郯庐断裂带内部的走滑拉张盆地;晚白垩世郯庐断裂带以西的华北广大地区整体处于隆升剥蚀状态,仅在河南信阳盆地及冀中、临清、黄骅坳陷的少数低洼地区接受沉积,多以红色河湖相粗碎屑为主。研究华北东部中生代盆地演化对于该地区前第三系油气勘探具有指导意义。 相似文献