共查询到19条相似文献，搜索用时 140 毫秒
1.
2.
西藏甲玛铜多金属矿床为冈底斯成矿带的超大型矿床之一,其矽卡岩型主矿体受林布宗组砂板岩、角岩(硅铝质岩石)和多底沟组大理岩(钙质岩石)的岩性界面所控制。基于岩、矿心地质编录,开展矽卡岩岩石、矿物分带及矽卡岩地球化学、矿物化学研究,探讨硅钙岩性界面对矽卡岩及多金属矿体形成的影响。从顶板至底板由石榴子石矽卡岩、硅灰石石榴子石矽卡岩至硅灰石矽卡岩表现出Si O2、Ca O逐渐增加和Al2O3、Fe2O3+Fe O逐渐减少的趋势,石榴子石矽卡岩、硅灰石矽卡岩的稀土元素和微量元素特征对顶板、底板岩石表现出明显的继承性。靠近顶板的矽卡岩中石榴子石属于钙铝-钙铁过渡系列,由石榴石核部向外环带具有Al含量减少、Fe含量增加的特点;靠近底板矽卡岩相对于靠近顶板具有钙铁榴石比例增加、钙铝榴石比例减少特征,由核部向外围未见明显的环带成分演变特征。矽卡岩是流体与硅铝质、钙质岩石水岩反应的产物,沿硅钙界面流体减压沸腾、地下水混合作用和界面内垂向的流体地球化学障是主要的致矿机制。硅、铝质岩石化学性质、物理性质差异是界面控矿的主要因素,硅钙面复合张性构造带、岩浆热事件增加界面渗透率差异有利于矿体规模的增加和品位提高。 相似文献
3.
江西永平铜矿床蚀变矿化分带、矿石组构及成矿过程 总被引：2，自引：0，他引：2
江西永平铜矿床位于江山-绍兴断裂带南缘、北武夷山燕山早期岩浆岩与海西期-印支期信江断裂坳陷带接合带,是一个伴生S-W-Pb-Zn多矿种的层状铜矿床。逆冲推覆构造控制着矿区内晚古生代地层、燕山期岩浆岩及矿体的空间分布,即基底周潭群逆冲推覆到晚古生界地层上,燕山早期黑云母花岗岩-花岗闪长岩、石英斑岩、花岗斑岩等沿逆冲推覆断面侵入,矿体呈层状产在矽卡岩化石炭系叶家湾组中。矿体围岩主要是石榴石矽卡岩、千枚状页岩及矽卡岩化大理岩。本文从矽卡岩分带、矿石组构等方面来刻画永平铜矿成矿精细过程。永平铜矿矿区的探采工程揭示,以火烧岗岩体为中心向外,蚀变矿物组合、石榴石颜色及矽卡岩的含矿性等表现出明显的分带规律,即从岩体到围岩有:石榴石→透辉石→硅灰石矽卡岩矿物分带;红色→棕色→绿色的石榴石颜色分带;矽卡岩含矿性先增加后降低,其中矿体主要在(红)棕色石榴石矽卡岩呈条带状或网脉状产出。矽卡岩型和变质砂页岩型矿石的矿石矿物组成均与硫化物-石英大脉(～10m)中矿石矿物组成相同或相似,均为黄铁矿-白钨矿-(方铅矿)-闪锌矿-黄铜矿,且生成顺序一致,说明矿区内不同类型的矿石是同一成矿热液体系在不同围岩类型及控矿构造中的产物。永平铜矿成矿过程可划分为石榴石、(磁)赤铁矿阶段、白钨矿阶段、铁铜硫化物阶段、铅锌硫化物阶段和碳酸盐阶段等六个阶段,其中石榴石阶段形成矽卡岩分带,在该阶段晚期形成磁黄铁矿-铁闪石-(黄铜矿)-石英块状矿石;(磁)赤铁矿阶段发育磁铁矿、赤铁矿;白钨矿阶段形成白钨矿及少量黑钨矿;铁铜硫化物阶段是铜硫矿主要矿化阶段,形成块状及脉状黄铜矿矿石;铅锌硫化物阶段是成矿晚期阶段;碳酸盐阶段代表原生成矿过程结束。 相似文献
4.
哈萨克斯坦萨亚克大型铜矿田中, 矽卡岩型矿床的矿体赋存于石炭系灰岩与花岗岩类的接触带上, 矿体及其周围发育大量矽卡岩。矽卡岩矿物主要由石榴子石、辉石、绿帘石、绿泥石等组成, 矿石矿物主要发育黄铜矿、斑铜矿、黄铁矿、磁黄铁矿、辉钴矿等。萨亚克矽卡岩型矿床成矿作用分为5个阶段: 透辉石-石榴子石矽卡岩阶段、石榴子石矽卡岩阶段、绿帘石-磁铁矿阶段、石英-硫化物阶段和碳酸盐阶段。电子探针分析结果表明, 矿区矽卡岩属典型的钙质矽卡岩。 其中石榴子石发育3种类型, 均属钙铝-钙铁榴石固溶体系列, 自早期透辉石-石榴子石矽卡岩阶段至晚期石榴子石矽卡岩阶段, 由钙铁榴石向钙铝-钙铁榴石转变, 并且钙铁-钙铝榴石与矿化关系最为密切。其中具环带结构的石榴子石中钙铁与钙铝含量随环带呈韵律性变化, 表明生长过程中成分具震荡性变化, 形成于不完全封闭的平衡条件, 指示流体的多期次多阶段性; 辉石以透辉石为主; 绿帘石属绿帘石族中绿帘石范畴; 磁铁矿TFeO含量高, 与其他氧化物成分呈负相关关系。石英硫化物阶段早期发育黄铜矿-黄铁矿-磁黄铁矿-白铁矿、黄铜矿-辉钴矿矿物组合; 晚期为主要矿化阶段, 发育大量致密块状黄铜矿。黄铜矿显示贫硫富铜、铁特征; 黄铁矿为亏硫型; 磁黄铁矿属贫钴富镍型。矽卡岩矿物共生组合及石榴子石成分演化等矿物学特征显示, 成矿过程中随着温度及氧逸度的降低, 成矿热液由弱碱性向酸性演化, 伴随热液在接触带的中和作用, 以黄铜矿为主的金属硫化物富集沉淀。 相似文献
5.
6.
湘南黄沙坪多金属矿床位于南岭构造带中段北缘,属于矽卡岩型矿床。根据矽卡岩产出状态、矿物共生组合及岩相学特征,从早期到晚期可划分为矽卡岩阶段、退化蚀变阶段、早期硫化物阶段和晚期硫化物阶段。矽卡岩矿物主要为石榴石、辉石、符山石等;金属矿物主要为白钨矿、辉钼矿、磁铁矿、方铅矿、闪锌矿等。电子探针分析结果表明,石榴石为钙铝-钙铁榴石系列,从早期到晚期,石榴石具有由钙铝榴石逐渐向钙铁榴石演化的规律。且钙铁榴石普遍发育震荡环带,而环带结构可持续记录钙铁榴石物理化学条件演化的过程。同时两种石榴石中均含Sn的成分,但钙铁榴石中Sn的含量明显高于钙铝榴石。辉石为透辉石-钙铁辉石系列,而且由内接触带向外接触带,辉石中Fe和Mn的含量有逐渐升高的趋势。矽卡岩矿物学特征及矿物成分的变化表明,成矿流体至少经历了两次氧化还原性质的转变。矽卡岩矿物学特征,对W(Sn) Mo Bi等多金属的矿化具有重要的地质指示意义。 相似文献
7.
西藏列廷冈铁多金属矿床矽卡岩矿物学特征及其地质意义 总被引：2，自引：2，他引：0
西藏列廷冈铁多金属矿床位于冈底斯北缘弧背断隆带内,是近年来勘查评价的规模可达中型的接触交代矽卡岩型矿床。矿区矽卡岩主要呈层状、似层状,矽卡岩型铁多金属矿体赋存于下-中三叠统查曲浦组(T_(1-2)c)矽卡岩和大理岩中,矿体呈透镜状、囊状、似层状产出,矽卡岩矿物较发育。为进一步查明矿床矽卡岩矿物种属及矽卡岩类型,剖析矽卡岩形成环境及其与矿化类型之间的关系,基于对矽卡岩矿物系统的显微镜下观测,利用电子探针对矿床主要矽卡岩矿物化学成分进行了系统分析。矽卡岩矿物主要为石榴子石、透辉石、角闪石、绿帘石、绿泥石等,矿床矽卡岩具典型钙矽卡岩特征。根据矿物共生组合及交代关系推断成矿流体经历了5个阶段,分别为早期矽卡岩阶段、退化蚀变阶段、早期热液阶段、石英硫化物阶段和碳酸盐阶段。特征矿物的电子探针分析结果表明,石榴子石主要为钙铁榴石-钙铝榴石系列(And_(18.37~99.89)Gro_(0.24~79.05)Ura+Pyr+Spe_(0.98~6.63)),且发育环带结构;辉石主要为透辉石-钙铁辉石系列(Di_(53.56~99.91)Hd_(1.61~44.55)Jo_(0.08~5.11));角闪石主要为阳起石,次为铁、镁角闪石,均属钙质角闪石系列;绿泥石主要为富铁的铁镁绿泥石;绿帘石贫Fe、Mg。在矿床成矿演化过程中,其成矿环境是发生改变的,早期矽卡岩阶段到最晚期碳酸盐阶段,成矿环境至少经历了从高温、偏碱性的氧化环境到相对低温、偏酸性的还原环境的转变。 相似文献
8.
西藏蒙亚啊铅锌矿床是冈底斯北缘一个重要的层状或似层状矽卡岩矿床,来姑组为矿床的主要容矿层位。矿区矽卡岩矿物主要有硅灰石、辉石、石榴石、透闪石、阳起石、绿帘石和绿泥石等。根据矿物的共生组合及交代关系,推断矿床经历了4个成矿阶段：早期矽卡岩阶段、晚期矽卡岩阶段、石英-硫化物阶段和碳酸盐阶段。结合矿物手标本及显微镜下观察,通过对矽卡岩矿物的电子探针测试,分析石榴石、辉石和硅灰石的矿物特征,结果表明：西藏蒙亚啊铅锌矿床属钙质矽卡岩矿床,石榴石和辉石的组分变化较大,分别为And599~9472Gro0~3787(Pyr+Spe+Alm)087~678和Di1885~9444Hd339~7058Jo009~1114,硅灰石的矿物组分为Wo9900~9944Fs037~078En007~023。石榴石属钙铁榴石-钙铝榴石系列,且环带发育,辉石为透辉石-钙铁辉石系列,硅灰石组分较纯。西藏蒙亚啊矽卡岩为钙质矽卡岩,其矿床在形成过程中经历了热液流体的多期多阶段演化,矿床形成环境也并不是稳定的封闭体系。矽卡岩矿物成分特征表明,蒙亚啊铅锌矿床的成矿环境是一个低酸性的氧化-弱氧化环境。 相似文献
9.
通过野外与显微镜观察和电子探针分析, 对柿竹园多金属矿床矽卡岩中石榴石的特征进行了研究.根据石榴石的产出状态、矿物的共生组合, 矽卡岩可分为4个带: 磁铁矿-辉石-石榴石带、辉石-石榴石带、符山石-石榴石带、矽卡岩化大理岩带.从成分上的变化, 探讨了石榴石在各矽卡岩带中的特征.柿竹园矿床矽卡岩中的石榴石可分为早、晚两期, 早期形成的石榴石颜色为暗棕色, 并且在垂直和水平方向上有明显的变化规律.从磁铁矿-辉石-石榴石带到矽卡岩化大理石带, 随着石榴石中Fe2O3含量的减少, Al2O3含量的增加, 由钙铁榴石向钙铝榴石变化; 石榴石晶体具有从核部向边缘由均质性向非均质性变化的规律.早期石榴石形成于较氧化的条件下, 温度为520~620℃, 压力为1000×105Pa, 由富含Si, Al, Fe, Cl, F组分的热液和泥盆纪佘田桥组灰岩反应交代形成.当温度降至450~ 540℃, pH, Eh值降低时, 晚期石榴石形成的同时使白钨矿沉淀.晚期石榴石颜色比早期形成的石榴石浅, 为红色.结晶颗粒较大, 并且, 普遍可以观察到石榴石环带结构. 相似文献
10.
维宝矽卡岩铜铅锌矿床位于新疆与青海两省交界处,大地构造位置属祁漫塔格造山带东段,可以分为维东、主矿段和维西三个矿段。主矿段和维东矿段以铅锌矿化为主,铜矿化很少,而维西矿段铜、铅、锌矿化均较发育。本次我们选取维西矿段的矽卡岩和矿石样品,进行了详细的矿物学研究。根据矿物共生组合、矿石组构以及脉体的穿插关系,可以将维西矿段成矿过程分为4个阶段,即早期矽卡岩阶段、晚期矽卡岩阶段、石英-硫化物阶段和石英-碳酸盐阶段,其中石英-硫化物阶段是主要的成矿阶段。矽卡岩矿物主要为石榴子石、辉石、绿帘石和角闪石等,硫化物主要为黄铜矿、方铅矿、闪锌矿、黄铁矿和磁黄铁矿等。电子探针分析表明,石榴子石成分以钙铁榴石分子(And=59.00%～97.70%)和钙铝榴石分子(Gro=1.92%～40.42%)为主,为钙铁—钙铝系列石榴子石;辉石主要由透辉石分子(Di=45%～91%)和钙铁辉石分子(Hd=8%～53%)组成,表现在矿物上以透辉石为主,而钙铁辉石数量很少;角闪石成分变化范围比较大,但总体上为透闪石—阳起石系列。综合矿物组合和化学成分特征表明维宝矿床维西矿段矽卡岩为钙矽卡岩。此外,具有环带结构的石榴子石从核部到边部,化学成分表现出有规律的变化,Al2O3含量先上升后下降,FeOT含量则先下降后上升。这表明随着交代作用的进行,成矿流体的pH值不断发生变化,由最初的弱酸性—碱性条件转变为近中性条件,最终又恢复到弱酸性—碱性条件。维西矿段硫化物的金属原子与硫原子的比值大部分都大于理论值,表明它们形成于硫逸度较高的环境。此外,闪锌矿中Fe、Zn含量变化范围比较大,Zn=54.50%～64.75%,Fe=1.15%～10.16%,这种大范围变化指示成矿过程中温度和硫逸度可能发生波动。 相似文献
11.
The chemistry of garnet can provide clues to the formation of skarn deposits. The chemical analyses of garnets from the Astamal Fe-LREE distal skarn deposit were completed using an electron probe micro-analyzer. The three types of garnet were identified in the Astamal skarn are: (I) euhedral coarse-grained isotropic garnets (10–30 mm across), which are strongly altered to epidote, calcite and quartz in their rim and core, with intense pervasive retrograde alteration and little variation in the overall composition (Adr94.3–84.4 Grs8.5–2.7 Alm1.9–0.2) (garnet I); (II) anhedral to subhedral brecciated isotropic garnets (5–10 mm across) with minor alteration, a narrow compositional range along the growth lines (Adr82–65.4 Grs21.9–11.7 Alm11.1–2.4) and relatively high Cu (up to 1997 ppm) and Ni (up to 1283 ppm) (garnet II); and (III) subhedral coarser grained garnets (> 30 mm across) with moderate alteration, weak diffusion and irregular zoning of discrete grossular-almandine-rich domains (Adr84.2–48.8 Grs32.4–7.6 Alm19.9–3.5) (garnet III). In the third type, the almandine content increases with increasing grossular/andradite ratio and increasing substitutions of Al for Fe3 +.Almost all three garnet types have been replaced by fine-grained, dark-brown allanite that is typically disseminated and has the same relief as andradite. The Cu content increases while Ni content decreases slightly towards the rim of garnet II and garnet III. Copper in garnet II is positively correlated with increasing almandine content and decreasing andradite content, indicating that the almandine structure, containing relatively more Fe2 +, is more suitable than andradite and grossular to host divalent cations such as Cu2 +. Nickel in garnet II is positively correlated with increasing andradite content, total Fe, and decreasing almandine content. This is because Ni2 + substitutes for Fe3 + in the Y (octahedral) position. There are unusual discrete grossular-almandine rich domains within andraditic garnet III, indicating the low diffusivity of Ca compared to Fe at high temperatures. 相似文献
12.
Zhiji Ren 《中国地球化学学报》1984,3(2):115-127
Geological and geochemical characteristics of tin-bearing magnetite-skarns are reviewed in this paper, together with the author’s opinion with respect to the mechanism of transport of tin in this environment. In addition to cassiterite, the most common form of occurrence of tin in nature, three other forms of occurrence are also of interest in tin-bearing magnetite-skarns: (1) tin present in the form of fine exsolution colloidal grains of cassiterite; (2) tin found as independent tin-bearing minerals, such as malayaite, stokesite, nordenskiöldine, Sn-paigeite, Sn-ludwigite and hulsite in a variety of skarns; (3) tin occurring in the lattice of some skarn minerals, such as garnet, pyroxene, spinel, amphibole, epidote, wollastonite and axinite in the manner of ionic replacement. When Mg2+ and Fe2+ bearing minerals, in some cases even Sulfides or other mineralizer-containing minerals, replace tin-bearing Fe3+ and Ti4+ skarn minerals during the late stage of skarn alteration, tin in the pre-existing silicates maybe extracted and remobilized, thus contributing to the formation of associated tin deposits. 相似文献
13.
The skarn type copper deposits are widespread in the Jiurui district in the Middle-Lower Yangtze River metallogenic belt. This paper reports a detailed study on mineral chemistry, and H, O, S and Pb isotopic compositions on skarn silicate and sulfide minerals in the three major skarn dominant deposits (Wushan, Dongleiwan and Dengjiashan). The Wushan skarn deposit is characterized with prograde garnet-dominated and clinopyroxene limited skarns with average andradite content of 83% and hedenbergite content of 10%, whereas the Dongleiwan and Dengjiashan deposits are featured with retrograde skarn alteration with abundant hydrous minerals such as epidote and chlorite. The garnet and clinopyroxene compositions show 59% andradite and 15% hedenbergite for the Dongleiwan skarns, and 43% and 22% for the Dengjiashan skarns respectively. The pistacite components (Ps value) defined as Fe3 +/(Fe3 ++ Al) and Fe3 +/Fe2 + value of epidote are 0.12 and 1.63 for the Wushan skarns, 0.30 and 32.73 for the Dongleiwan skarns, and 0.17 and 42.85 for the Dengjiashan skarns. It is suggested that the prograde skarn mineralization in the three deposits was all formed in a relatively oxidizing environment, with the Wushan showing the highest oxidation potential and the Dengjiashan having the least oxidation potential. However, in the retrograde skarns, the Dongleiwan and Dengjiashan deposits show higher oxidation potential than that of Wushan. The three deposits show similar sulfur isotopic compositions of − 2.9 to + 1.4‰ and similar lead isotopic compositions with 206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb ratios of 17.900 to 18.205, 15.538 to 15.649 and 38.170 to 39.025, respectively. All the three deposits should have similar magmatic origin for the ore-forming materials based on their S and Pb isotopes. The oxygen isotopic compositions of the prograde and retrograde fluids in the three deposits show some differences, with δ18OFluid values of + 8.13‰ and + 7.81‰ for the Wushan, + 6.47‰ and + 2.33‰ for the Dongleiwan, and + 8.27‰ and + 4.43‰ for the Dengjiashan. But the hydrogen isotopic compositions are similar for the prograde (− 65 to − 31‰) and retrograde (− 64 to − 33‰) fluids. Therefore, the fluid origins and evolution may be different in each deposit. The hydrothermal fluids for the prograde skarns in all three deposits were likely derived from magmatic–hydrothermal sources, but the Dongleiwan and Dengjiashan show a higher proportion of meteoric water input in the retrograde stage. Considering the similar average prograde temperatures (574 to 560 °C) as calculated from coexisting garnet–clinopyroxene pairs, and similar retrograde temperatures (281 to 246 °C) as calculated from chlorite chemistry for the three deposits, we suggest that the trigger for deposition of sulfide ores in the Wushan garnet-dominated skarn deposit was mainly caused by system cooling with temperature drop along with magmatic intrusion and crystallization process. The Dongleiwan and Dengjiashan skarn deposits constitute a well developed retrograde skarn system with abundant epidote, chlorite, quartz and calcite, which probably caused by fluid mixing of high-temperature saline magmatic–hydrothermal fluids with cooler, oxidizing and dilute meteoric water. 相似文献
14.
滇东南老君山锡-钨-锌-铟多金属矿集区含矿矽卡岩成因研究 总被引：2，自引：2，他引：0
滇东南老君山矿集区广泛分布的矽卡岩是本区锡-钨-锌-铟多金属矿床的主要赋存围岩。长期以来,该区含矿矽卡岩的成因争议较大,由此也制约了对该区锡钨多金属成矿规律的认识。本文以区内代表性的都龙和南秧田矿区含矿矽卡岩为研究对象,在对其地质特征详细研究的基础上,运用电子探针和ICP-MS分别测定了上述两个矿区含矿矽卡岩的矿物成分、微量和稀土元素组成,探讨了它们和多金属矿床的成岩成矿机制的关系。结果表明,区内同时存在与地层产状一致的"层状"含矿矽卡岩和明显切割层理的穿层含矿矽卡岩。都龙矿区含矿矽卡岩富Fe、贫Al,主要矿物端元成分为钙铁榴石(And_(52-69)Gro_(28-45)Spe_(1-4))、钙铁辉石(Di_(11-41)Hd_(51-73)Jo_(0-28))和铁阳起石等,从干矽卡岩到退化蚀变阶段,形成环境由酸性的弱还原环境向偏碱性的相对氧化环境变化。南秧田矿区含矿矽卡岩富Mg、Al,贫Fe,主要矿物端元成分为钙铝榴石(Gro_(82-89)Alm_(7-13)And_(2-5))、透辉石(Di_(55-81)Hd_(18-42)Jo_(0-5))和透闪石(阳起石)等,形成于相对还原的环境。都龙和南秧田矿区含矿矽卡岩与花岗岩都显示出相似的、LREE相对富集的右倾型稀土配分模式,多具有中等-弱Eu负异常,与典型的热液交代成因矽卡岩特征相似。综合分析认为,该区含矿矽卡岩主要形成于燕山晚期花岗岩浆热液与围岩的交代作用,"层状"矽卡岩可能是热液沿层间构造、岩相突变带等有利位置进行交代的结果。 相似文献
15.
Fluid metasomatic genesis of stratiform skarn in the Suoerkuduke Cu-Mo deposit,East Junggar,NW China
Stratiform skarns associated with ore deposits are widespread in the north of East Junggar, particularly in the Suoerkuduke Cu-Mo deposit. The Suoerkuduke stratiform and stratoid skarns are hosted by Devonian intermediate-mafic volcanic and pyroclastic rocks, mainly andesite, andesitic porphyry and tuffaceous sandstone, without carbonate or calcareous rocks. The skarns consist of dominant andradite-grossular, epidote, diopside-hedenbergite and minor actinolite, quartz, magnetite and metallic sulfides. The garnet and epidote composition, especially Fe3 + and Al contents, is largely a function of the bulk composition and physicochemical environment (particularly fO2) during crystallization. Such mineralogy indicates a relatively oxidizing environment and medium acidity of solution during skarnization.The Suoerkuduke skarns are distinct from typical contact metasomatic skarn in wall rock, as no carbonate or calcareous rocks were found, and differ in the distribution patterns of skarn zonation in that gradually weakened skarn zones are not quite symmetrically distributed on both sides of the alteration center (a garnet skarn). Abundant remnants of andesite, andesitic porphyry and tuffaceous sandstone in the weakened skarn zone indicate that the protolith of the skarn is andesite, andesitic porphyry and tuffaceous sandstone. Magmatic water, meteoric and seawater are involved in skarn alteration. Moyite and granitic porphyry are not coeval with skarn, and their emplacement resulted in the hornfelization of wall rock instead of skarnization, and themselves keep away from skarn alteration. Therefore, there was probably a huge batholith supplying magmatic fluid for skarn formation. Mass balance estimates suggest that hydrothermal fluid must contribute a portion of Ca and Fe to ensure sufficient supply for skarn formation in the absence of local carbonate and calcareous rocks. In conclusion, the stratiform skarns in the Suoerkuduke are products of intermediate-mafic volcanic and pyroclastic rocks metasomatised by hydrothermal fluid that probably leached calcareous wall rock during ascent. 相似文献
16.
Metacarbonate rocks (including marble and skarn deposits) at Bahrah area are confined to a Precambrian island-arc suite made up mostly of massive basalts and volcaniclastics aligned in a NE-trending belt. The marbles are either pure (almost made up of calcite) or contain considerable amounts of tremolite, actinolite, epidote, and diopside. Garnet-bearing rocks at Bahrah area are classified into garnetiferous marble and skarn calc-silicate assemblages that are described here for the first time. The calc-silicates become more abundant when the marble becomes interbedded with foliated metabasalt. Such contact is delineated by an epidote zone of variable thickness. Microscopically, the skarns are enriched in Ca-bearing minerals such as grossular garnet, epidote, titanite, diopside, and augitic salite. There are evidence that calc-silicate skarns were formed due to a thermal effect of a concealed underground shallow granitic intrusion. The basaltic rocks furnished Mg2+, Fe2+, Ti4+, and Al3+ that were first concentrated in the epidote zone. This was followed by pervasive replacement of epidote by large idiomorphic garnet (grossularite) that attains up to ～1.5 cm wide. It is evident that diopside is earlier than garnet with no replacement fabrics between the two minerals. Two types of titanite (sphene) can be distinguished: The first is secondary in the metabasalt host where titanite develops after titanomagnetite during regional metamorphism (i.e., metamorphic). On the other hand, the second type of titanite is found in the garnet-bearing calc-silicate skarn where it is typically euhedral with no link to any opaque phase and it is believed to be formed due to the event of superimposed thermal metamorphism (i.e., metasomatic). There are several evidence of the thermal metamorphic effect such as distinct granoblastic and annealing textures and K-metasomatism and formation of phlogopite at the expense of tremolite in the marble, in addition to poikiloblastic hornblende in the metabasalt host with distinct recrystallization. Also, there are some evidence of shearing such as brecciation along microshear planes, microfolding, introduction of fine euhedral pyrite, and presence of injected silica postdating crystallization of garnet in the calc-silicates. 相似文献
17.
Chao Li Tao Ren Jian-Guo Huang Run-Sheng Han He-Jun Yin Hong-Yang Zhou Zhi-Hong Feng 《中国地球化学学报》2017,36(1):89-101
The Tayuan (Cu–Mo)–Pb–Zn deposit is located in the northern part of Daxinganling, NE China. Lenticular ore body occurs in the skarn zone. The skarn minerals mainly include garnet, pyroxene, epidote and wollastonite. Electron microprobe analysis shows that the end member of garnet is mainly andradite (Ad62–97Gr11–45), the pyroxene is mainly diopside, and epidote is mainly clinozoisite. These characteristics indicate that the Tayuan polymetallic skarn deposit is mainly calcareous skarn. Sometimes the content zonation can be observed in garnets. With one garnet crystal, content is shifty from the core to the rim. In general, the iron content in the core is higher than in the edge. The content in the garnet shows that the garnet in the Tayuan deposit formed from weak oxidation in alkaline environment with the oxygen fugacity increasing, suggesting that the hydrothermal fluid evolved from an acidic to a slight alkaline state. In the Tayuan polymetallic deposit, the ratio of Mn/Fe in pyroxene is about 1.3, and of Mg/Fe, it is about 2. The components of garnet in the Tayuan deposit plot in the field of the typical skarn Zn, Cu, Mo deposits in the world. 相似文献
18.
Geology of gold-bearing skarn deposits in the middle and lower Yangtze River Valley and adjacent regions 总被引：5，自引：0，他引：5
The middle and lower Yangtze River Valley and adjacent regions are the most important metallogenic belt of gold (and copper)-bearing skarn deposits in China. The total gold reserves in this belt have been estimated at more than 600 t. The gold-bearing skarns are mainly distributed in the southeastern Hubei, Tongling and northern Anhui regions. Favorable tectonic settings are depressions and fold zones of the platforms, i.e., mobile belts. These skarns are hosted by platformal limestone, dolomitic limestone and dolomite of the Triassic, Carboniferous-Permian and Middle to Lower Cambrian formations. The related intrusions are Yenshanian (180 to 113 Ma) calc-alkaline quartz monzodiorite, granodiorite, quartz monzonite, monzogabbro, and their hybabyssal facies. The intrusions have high Fe2O3/FeO (>0.5) and intermediate initial 87Sr/86Sr ratios (0.7046 to 0.7087). Their REE distribution patterns are LREE-enriched and exhibit smooth, right-dipping curves. These suggest that the source materials mainly came from upper mantle, with contamination by sialic crustal components. The auriferous skarns are both calcic and magnesian, but calcic skarns are most common. The constituent minerals of the calcic skarns are diopside, garnet, wollastonite, vesuvianite and scapolite, whereas magnesian skarns are dominated by forsterite, spinel, diopside, phlogopite, chondrodite and clinohumite, with abundant superimposed serpentine, clinochlore and brucite. The compositions of coexisting pyroxenes and garnets are diopside and andradite, indicating the high oxygen fugacity and low acidity conditions. Gold is closely associated with Cu (Pb, Zn) sulfides and exists mainly in the form of native gold and electrum. Arsenides, tellurides, bismuthides and selenides are present in many ore deposits. Therefore, Cu, As, Bi, Te, Ag, Pb, Zn, Se and Co are the major metals present in the deposits and are important geochemical ore-searching indicators. In some Au (Fe, Cu) magnesian skarns, magnesiomagnetite, magnesioferrite and ludwigite are locally abundant. The metasomatic zoning in many gold skarn deposits is very distinct consisting of an outward sequence of: Fe (Cu)→Cu (Mo)→Cu (Au)→Au (Cu)→Au (Pb, Zn). The geologic characteristics of Au (Cu) skarn deposits that formed in the mobile platformal setting of China have distinct differences compared to Au skarns formed in orogenic belts at convergent plate margins in British Columbia and the western USA. 相似文献
19.
N. H. S. Oliver P. J. Pearson R. J. Holcombe A. Ord 《Australian Journal of Earth Sciences》2013,60(3):467-484
The Mary Kathleen U‐REE orebody of the Proterozoic Mt Isa Block was the product of chemical and physical interaction between regional metamorphic/hydrothermal fluids and preexisting calcic skarns. The deposit provides excellent examples of mechanical control on ore localisation and of the complexity of ores in rocks with protracted thermal histories. Host skarns were produced by contact metasomatism around the 1740 Ma Burstall Granite, whereas the allanite‐uraninite ore formed under amphibolite‐facies conditions, late during the D2 phase of the ca 1550–1500 Ma Isan orogeny. Observations of ore geometry are consistent with previous geochronologic data demonstrating a large time gap between skarn formation and ore genesis. Numerical modelling of coupled deformation and fluid flow suggests that veins at the core of ore shoots may have formed as tensile or shear fractures during coupling of the competent skarn host with the late‐D2 Mary Kathleen Shear Zone, allowing a change of orientation of ore shoots with distance from the shear zone. Mineral chemistry and petrographic observations suggest the possible role of a redox control on chemical localisation of ore by conversion of Fe2+‐rich clinopyroxene‐rich skarn host to Fe3+‐rich secondary garnet ‘skarn’ and uraninite‐allanite ore. Alternately, fluid pressure drops as a consequence of fracturing of the host skarn may have triggered fluid unmixing, or fluid mixing, leading to ore precipitation. Available data do not allow clear definition of the ultimate source of the U and REE, nor of the specific chemical ore‐forming mechanism. However, regional constraints, previous Sm–Nd modelling, and our numerical models suggest a combination from proximal skarn hosts and from distal sources accessed by flow of metamorphic and/or late tectonic igneous‐derived fluids. The deposit has some similarities with ironstone‐hosted Cu–Au ± U deposits found in the nearby Cloncurry Belt. 相似文献