首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 78 毫秒
1.
Silkeborg Gravity High is a dominant positive gravity anomaly in Denmark. It is associated with an igneous intrusion within the crust. A deep refraction seismic profile locates the top of the intrusion in depths between 11 km and 25 km. The present contribution should be read together with two other papers by the author (Strykowski, 1998; Strykowski, 1999) dealing with the modelling problems of the same area.Strykowski (1998) discusses an advanced method of geological stripping. The focus is on coupling various types of piecewise information (depth to the top/base of geological bodies/layers obtained from depth converted seismograms and interpolated to a horizontal grid, surface gravity data, and mass density information from boreholes). The objective is to model the surface gravity response of known sediments to a depth level of 10 km.Illustrated by the practical example (modelling of the source of Silkeborg Gravity High) Strykowski (1999) discusses methodological aspects of extracting information about the geometry of the source body (in 3D) from (geologically stripped) surface gravity data and from a cross-secting deep seismic profile. The average mass density contrast between the source body (the intrusion) and the surroundings is estimated. The used geometrical information from the seismogram is weak (only the depth interval). A remarkable result of this investigation is that the along profile cross section of the obtained (3D-)structure agrees with the geometrical information of the refraction seismic profile.The present paper is an attempt to extend this result to the rest of the sedimentary basin. Of particular interest is another positive gravity anomaly (another intrusion?) located to the north-west of the studied anomaly. A “final model” obtained here estimates the depth to the source body to 14 km.Nevertheless, the focus of the present paper is not on finding a particular “best model” of the subsurface, but on ambiguity considerations. Especially, on how the different assumptions alter the obtained model? The interesting aspect is whether the used assumptions are supported by the available information.  相似文献   

2.
Jurassic igneous bodies of the Sanandaj–Sirjan zone (SaSZ) in SW Iran are generally considered as a magmatic arc but critical evaluation of modern geochronology, geochemistry and radiogenic isotopes challenges this conclusion. There is no evidence for sustained igneous activity along the ~1,200 km long SaSZ, as expected for a convergent plate margin; instead activity was brief at most sites and propagated NW at ~20 mm/a. Jurassic igneous rocks define a bimodal suite of gabbro‐diorite and granite. Chemical and isotopic compositions of mafic rocks indicate subcontinental lithospheric mantle sources that mostly lacked subduction‐related modifications. The arc‐like features of S‐type granites reflect massive involvement of Cadomian crust and younger sediments to generate felsic melts in response to mafic intrusions. We conclude that Jurassic SaSZ igneous activity occurred in a continental rift, not an arc. SaSZ igneous rocks do not indicate that subduction along the SW margin of Eurasia began in Jurassic time.  相似文献   

3.
深水远端裂陷盆地演化是大陆边缘构造研究的热点.中沙海槽盆地位于西北次海盆和西南次海盆之间,是一个临近洋盆的裂陷盆地.根据最新的地球物理资料,揭示了该盆地的沉积层序和构造演化.中沙海槽盆地裂开后期地层厚度约为200～1500 m,可划分为6个地震层序.古近系分布局限,仅限于中沙海槽盆地和中沙南盆地的深凹部位;新近系一般厚...  相似文献   

4.
南沙中部海域北康·曾母盆地重磁异常特征及解释   总被引：7，自引：2，他引：7  
林珍 《物探与化探》2003,27(4):263-268
通过对南沙中部海域北康、曾母盆地重、磁资料的定量计算、定性解释,认为空间重力异常主要受浅部地质因素影响,空间重力异常的高低间接地反映了海底地形起伏变化、新生代沉积层厚度大小、沉积岩密度变化以及基底的坳、隆等特征;磁力异常资料通过预后处理及反演计算,推测北康、曾母盆地新生代火成岩以中酸性-中基性岩为主,磁性基底与声波基底基本一致,可划分为2处坳陷及3处隆起;北康、曾母盆地位于减薄的大陆壳上,莫霍面深度约21～2 km.重、磁资料综合解释结果为沉积盖层构造分区、基底断裂推断及火成岩岩性识别提供依据.  相似文献   

5.
The Arunta Inlier is a 200 000 km2 region of mainly Precambrian metamorphosed sedimentary and igneous rock in central Australia. To the N it merges with similar rocks of lower metamorphic grade in the Tennant Creek Inlier, and to the NW it merges with schist and gneiss of The Granites‐Tanami Province. It is characterized by mafic and felsic meta‐igneous rocks, abundant silicic and aluminous metasediments and carbonate, and low‐ to medium‐pressure metamorphism. Hence, the Arunta Inlier is interpreted as a Proterozoic ensialic mobile belt floored by continental crust. The belt evolved over about 1500 Ma, and began with mafic and felsic volcanism and mafic intrusion in a latitudinal rift, followed by shale and limestone deposition, deformation, metamorphism and emergence. Flysch sedimentation and volcanism then continued in geosynclinal troughs flanking the ridge of meta‐igneous rocks, and were followed by platform deposition of thin shallow‐marine sediments, further deformation, and episodes of metamorphism and granite intrusion.  相似文献   

6.
Mount Telout, situated at the edge of the Murzuq Basin, is a 325 m high conical hill within a circular collapse structure that records 0·5 km3 of sand intrusion into Silurian shales. Based on a comparison with other similar circular collapse structures around the Murzuq Basin, it is argued that sand injection in the form of pipes occurred during the Devonian. The overpressures triggering the process are inferred to result from a combination of: (i) tectonic uplift at a basin scale that initially focused regional ground water flows; and (ii) igneous intrusion within the sand‐rich Cambrian–Ordovician strata. The palaeorelief buried under the regionally extensive Silurian shales may have locally focused overpressures and localized sand injection at the 1 to 10 km scale. The Mount Telout injected sandbody and related features offer exceptional, seismic‐scale outcrop analogues for sand injections that are often identified in seismic reflection data. Large‐scale sand injections might be essential in petroleum exploration of the North African Lower Palaeozoic basins as they form seal‐bypass systems.  相似文献   

7.
There are giant mineral deposits, including the Jinding Zn-Pb and Baiyangping Ag-Co-Cu, and otherimportant mineral deposits (e.g., Baiyangchang Ag-Cu, Jinman Cu deposits, etc.) in the Lanping Mesozoic-Cenozoic Basin, Yunnan Province, China. The tabular ore-bodies and some veins hosted in terrestrial clastic rocks of the Mesozoic-Cenozoic age and no outcropping of igneous rocks in the giant deposits lead to the proposal of syngenetic origin, but the giant mineral deposits are not stratabound (e.g. MVT, sandstone- and Sedex-type). They formed in a continental red basin with intense crust movement. The mineralization is controlled by structures and lithology and occurs in different strata, and no sedimentary nature and no exhalative sediments are identified in the deposits. The deposits show some relations with organic matter (now asphalt and petroleum) and evaporates (gypsum). The middle-low-temperature (mainly 110℃ to 280℃) mineralization took place at a depth of about 0.9 km to 3.1 km during the early  相似文献   

8.
The geology of the Snowdonia National Park in North Wales comprises a mixture of Lower Palaeozoic shallow marine sediments, acidic igneous rocks and basic intrusions of the Welsh Basin that were subsequently deformed during the Caledonian Orogeny. Thin igneous intrusions are challenging to map due to variable surface exposures, their intrusive origin, structural deformation and burial by glacial sediments. This study used a combination of traditional geological techniques, near‐surface geophysical surveys and remote sensing to detect and map a buried dolerite sheet intrusion. Both simple and mathematical analysis of magnetic anomalies and numerical modelling allowed the dolerite position, depths and target widths to be determined. Results showed that calibrated magnetic surveys can characterize buried igneous bodies in such mountainous environments.  相似文献   

9.
The spatial correlation of the South Sinegorsk basin with the Paleozoic magma chamber at the depth of 5–7 km is revealed as a result of interpreting the statistical gravitation model representing the rheological properties of the crust in the Sinegorsk ore region to the depth of 30 km. The intrusion center of the volcanic formation is approached at the midst of the basin to the depths of 1–2 km, where a local volcanotectonic elevation is formed with uranium mineralization associated with the eastern flank of the latter. The western flank of this volcanic center occupying the area of the Monastyrishche volcanic depression, overlapped mainly by Cenozoic cover, is assumed to be highly promising. The distribution of density contrasts in the middle and lower layers of the crust indicates the absence of any actual relationships between the uppercrust igneous structures and the deep-seated upper-mantle formations. It is concluded that the top layer of the crust to the depth of 10 km was separated during the Late Paleozoic–Mesozoic time from the mantle “root” of the South Sinegorsk structure and displaced southwestwards synchronously to overthrust and strike–slip dislocations in the west of Sikhote Alin. The occurrence of this root is proposed because of the presence of Paleozoic andesibasalts, basite–hyperbasites, peridotites, and basalts over the entire area considered.  相似文献   

10.
THE CRUST VELOCITY STRUCTURE OF PROFILE 820 IN THE AREA OF EAST CHINA SEA AND ITS VICINITY  相似文献   

11.
The Atlantic margin offshore Senegal has been explored by seismic reflection and GRAV‐MAG surveys. High‐amplitude, laterally transgressive seismic reflectors are found to coincide with gravimetric and magnetic highs. Once seismic data are integrated with potential fields modelling, these reflectors can be safely interpreted as saucer‐shaped igneous sills, up to some hundreds of metres thick, some km wide. The occurrence of hydrothermal vent complexes and forced folds in the stratigraphic sequence above the sills constrain the intrusion age to the Miocene. Field observations and in‐situ magnetic susceptibility measurements of Oligocene–Miocene and Quaternary igneous rocks emplaced in coastal Senegal support this interpretation.  相似文献   

12.
The Shivar pluton, a large granodiorite–monzonite intrusion in NW Iran, was intruded into Cretaceous sedimentary rocks during the Oligo‐Miocene. Its thermal aureole contains a variety of pelitic, basic and calc‐silicate hornfelses. Mineral parageneses in the pelitic and calc‐silicate hornfelses are studied here and mineralogical zones are determined. The maximum pressure of contact metamorphism is estimated to have been about 2.2 kbar on the basis of mineral parageneses in the pelitic rocks, indicating that the intrusion was emplaced no deeper than 8 km in the crust. Crystal size distribution (CSD) studies in the calc‐silicate hornfelses indicate that the degree of overstepping was high near the igneous contact. Secondary solid phases (SSP) inhibited growth of calcite grains in the calc‐silicate rocks and impure marbles. Garnet had a greater inhibitory effect as a SSP than tremolite or clinopyroxene. The time required for coarsening of calcite is calculated for two samples collected at different distances from the igneous contact. The time required for calcite coarsening is about 33 000 years for the sample 800 m from the contact and about 226 000 years for the sample 120 m from the contact. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

13.
Abstract: A three-dimensional local-scale P-velocity model down to 25 km depth around the main shock epicenter region was constructed using 83821 event-to-receiver seismic rays from 5856 aftershocks recorded by a newly deployed temporary seismic network. Checkerboard tests show that our tomographic model has lateral and vertical resolution of ~2 km. The high-resolution P-velocity model revealed interesting structures in the seismogenic layer: (1) The Guanxian-Anxian fault, Yingxiu-Beichuan fault and Wenchuan-Maoxian fault of the Longmen Shan fault zone are well delineated by sharp upper crustal velocity changes; (2) The Pengguan massif has generally higher velocity than its surrounding areas, and may extend down to at least ~10 km from the surface; (3) A sharp lateral velocity variation beneath the Wenchuan-Maoxian fault may indicate that the Pengguan massif’s western boundary and/or the Wenchuan-Maoxian fault is vertical, and the hypocenter of the Wenchuan earthquake possibly located at the conjunction point of the NW dipping Yingxiu-Beichuan and Guanxian-Anxian faults, and vertical Wenchuan-Maoxian fault; (4) Vicinity along the Yingxiu-Beichuan fault is characterized by very low velocity and low seismicity at shallow depths, possibly due to high content of porosity and fractures; (5) Two blocks of low-velocity anomaly are respectively imaged in the hanging wall and foot wall of the Guanxian-Anxian fault with a ~7 km offset with ~5 km vertical component.  相似文献   

14.
Core HU97048‐007PC was recovered from the continental Labrador Sea slope at a water depth of 945 m, 250 km seaward from the mouth of Cumberland Sound, and 400 km north of Hudson Strait. Cumberland Sound is a structural trough partly floored by Cretaceous mudstones and Paleozoic carbonates. The record extends from ～10 to 58 ka. On‐board logging revealed a complex series of lithofacies, including buff‐colored detrital carbonate‐rich sediments [Heinrich (H)‐events] frequently bracketed by black facies. We investigate the provenance of these facies using quantitative X‐ray diffraction on drill‐core samples from Paleozoic and Cretaceous bedrock from the SE Baffin Island Shelf, and on the < 2‐mm sediment fraction in a transect of five cores from Cumberland Sound to the NW Labrador Sea. A sediment unmixing program was used to discriminate between sediment sources, which included dolomite‐rich sediments from Baffin Bay, calcite‐rich sediments from Hudson Strait and discrete sources from Cumberland Sound. Results indicated that the bulk of the sediment was derived from Cumberland Sound, but Baffin Bay contributed to sediments coeval with H‐0 (Younger Dryas), whereas Hudson Strait was the source during H‐events 1–4. Contributions from the Cretaceous outcrops within Cumberland Sound bracket H‐events, thus both leading and lagging Hudson Strait‐sourced H‐events. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

15.
The Proterozoic Soldiers Cap Group, a product of two major magmatic rift phases separated by clastic sediment deposition, hosts mineralised (e.g. Pegmont Broken Hill‐type deposit) and barren iron oxide‐rich units at three main stratigraphic levels. Evaluation of detailed geological and geochemical features was carried out for one lens of an apatite‐garnet‐rich, laterally extensive (1.9 km) example, the Weatherly Creek iron‐formation, and it was placed in the context of reconnaissance studies of other similar units in the area. Chemical similarities with iron‐formations associated with Broken Hill‐type Pb–Zn deposit iron‐formations are demonstrated here. Concordant contact relationships, mineralogy, geochemical patterns and pre‐deformational alteration all indicate that the Soldiers Cap Group iron‐formations are mainly hydrothermal chemical sediments. Chondrite normalised REE patterns display positive Eu and negative Ce anomalisms, are consistent with components of both high‐temperature, reduced, hydrothermal fluid (≥250°C) and cool oxidised seawater. Major element data suggest a largely mafic provenance for montmorillonitic clays and other detritus during chemical sedimentation, consistent with westward erosion of Cover Sequence 2 volcanic rocks, rather than local mafic sources. Ni enrichment is most consistent with hydrogenous uptake by Mn‐oxides or carbonates. Temperatures inferred from REE data indicate that although they are not strongly enriched, base metals such as Pb and Zn are likely to have been transported and deposited prior to or following iron‐formation deposition. Most chemical sedimentation pre‐dated emplacement of the major mafic igneous sill complexes present in the upper part of the basin. Heating of deep basinal brines in a regional‐scale aquifer by deep‐seated mafic magma chambers is inferred to have driven development of hydrothermal fluids. Three major episodes of extension exhausted this aquifer, but were succeeded by a final climactic extensional phase, which produced widespread voluminous mafic volcanism. The lateral extent of the iron‐formations requires a depositional setting such as a sea‐floor metalliferous sediment blanket or series of brine pools, with iron‐formation deposition likely confined to much smaller fault‐fed areas surrounded by Fe–Mn–P–anomalous sediments. These relationships indicate that in such settings, major sulfide deposits and their associated chemical sediment marker horizons need not overlie major igneous sequences. Rather, the timing of expulsion of hydrothermal fluid reflects the interplay between deep‐seated heating, extension and magmatism.  相似文献   

16.
This paper presents the results of a comparative study of pockmarks and associated features appearing on both sides of the North Atlantic: on the Scotian Shelf off Nova Scotia and in the northern North Sea. Pockmarks are formed in seabed material consisting of soft silty clay. The seismic, sonar and lithologic characteristics of the sediments on the Scotian Shelf are remarkably similar to those found in the northern North Sea. Sediment clouds suspended in the water column immediately over the seabed have previously been observed on side-scan records associated with gas-charged sediments on corresponding shallow-seismic records. These and similar observations strongly suggest that most pockmarks are caused by gas efflux through the seafloor. However, the detailed mechanism of formation and the origin of the gas in the sediments is still unknown.  相似文献   

17.
Buried palaeo‐valley systems have been identified widely beneath lowland parts of the UK including eastern England, central England, south Wales and the North Sea. In the Midland Valley of Scotland palaeo‐valleys have been identified yet the age and genesis of these enigmatic features remain poorly understood. This study utilizes a digital data set of over 100 000 boreholes that penetrate the full thickness of deposits in the Midland Valley of Scotland. It identified 18 buried palaeo‐valleys, which range from 4 to 36 km in length and 24 to 162 m in depth. Geometric analysis has revealed four distinct valley morphologies, which were formed by different subglacial and subaerial processes. Some palaeo‐valleys cross‐cut each other with the deepest features aligning east–west. These east–west features align with the reconstructed ice‐flow direction under maximum conditions of the Main Late Devensian glaciation. The shallower features appear more aligned to ice‐flow direction during ice‐sheet retreat, and were therefore probably incised under more restricted ice‐sheet configurations. The bedrock lithology influences and enhances the position and depth of palaeo‐valleys in this lowland glacial terrain. Faults have juxtaposed Palaeozoic sedimentary and igneous rocks and the deepest palaeo‐valleys occur immediately down‐ice of knick‐points in the more resistant igneous bedrock. The features are regularly reused and the fills are dominated by glacial fluvial and glacial marine deposits. This suggests that the majority of infilling of the features happened during deglaciation and may be unrelated to the processes that cut them.  相似文献   

18.
Deformation structures in the wall rocks of igneous intrusions emplaced at shallow crustal depths preserve an important record of how space was created for magma in the host rocks. Trachyte Mesa, a small Oligocene age intrusion in the Henry Mountains, Utah, is composed of a series of stacked tabular, sheet-like intrusions emplaced at 3–3.5 km depth into sandstone-dominated sedimentary sequences of late Palaeozoic–Mesozoic age. New structural analysis of the spatial distribution, geometry, kinematics and relative timings of deformation structures in the host rocks of the intrusion has enabled the recognition of distinct pre-, syn-, and late-stage-emplacement deformation phases. Our observations suggest a two-stage growth mechanism for individual sheets where radial growth of a thin sheet was followed by vertical inflation. Dip-slip faults formed during vertical inflation; they are restricted to the tips of individual sheets due to strain localisation, with magma preferentially exploiting these faults, initiating sill (sheet) climbing. The order in which sheets are stacked impacts on the intrusion geometry and associated deformation of wall rocks. Our results offer new insights into the incremental intrusion geometries of shallow-level magmatic bodies and the potential impact of their emplacement on surrounding host rocks.  相似文献   

19.
The Lachlan Fold Belt has the velocity‐depth structure of continental crust, with a thickness exceeding 50 km under the region of highest topography in Australia, and in the range 41–44 km under the central Fold Belt and Sydney Basin. There is no evidence of high upper crustal velocities normally associated with marginal or back‐arc basin crustal rocks. The velocities in the lower crust are consistent with an overall increase in metamorphic grade and/or mafic mineral content with depth. Continuing tectonic development throughout the region and the negligible seismicity at depths greater than 30 km indicate that the lower crust is undergoing ductile deformation.

The upper crustal velocities below the Sydney Basin are in the range 5.75–5.9 km/s to about 8 km, increasing to 6.35–6.5 km/s at about 15–17 km depth, where there is a high‐velocity (7.0 km/s) zone for about 9 km evident in results from one direction. The lower crust is characterised by a velocity gradient from about 6.7 km/s at 25 km, to 7.7 km/s at 40–42 km, and a transition to an upper mantle velocity of 8.03–8.12 km/s at 41.5–43.5 km depth.

Across the central Lachlan Fold Belt, velocities generally increase from 5.6 km/s at the surface to 6.0 km/s at 14.5 km depth, with a higher‐velocity zone (5.95 km/s) in the depth range 2.5–7.0 km. In the lower crust, velocities increase from 6.3 km/s at 16 km depth to 7.2 km/s at 40 km depth, then increase to 7.95 km/s at 43 km. A steeper gradient is evident at 26.5–28 km depth, where the velocity is about 6.6—6.8 km/s. Under part of the area an upper mantle low‐velocity zone in the depth range 50–64 km is interpreted from strong events recorded at distances greater than 320 km.

There is no substantial difference in the Moho depth across the boundary between the Sydney Basin and the Lachlan Fold Belt, consistent with the Basin overlying part of the Fold Belt. Pre‐Ordovician rocks within the crust suggest fragmented continental‐type crust existed E of the Precambrian craton and that these contribute to the thick crustal section in SE Australia.  相似文献   

20.
Out of a dense network of seismic reflection lines for hydrocarbon exploration in the North-east German Basin, several lines were recorded to 12 s TWT to obtain information about the structure of the crust and the crust-mantle transition. One of these profiles is presented here. This stretches for 110 km in a NNE direction between Neustrelitz and the island of Usedom. It reaches from the External Variscides in the south across the North German Massif into the Rügen-Pomorze Terrane in the Baltic Sea. Below Cenozoic-Mesozoic-Paleozoic cover with clear reflections down to base Zechstein, the reflectivity varies considerably with depth and also laterally. The Paleozoic and Precambrian sediments and basement are generally void of reflections, but the lower crust and the Moho show strong reflections. To the north the reflectivity decreases, and the Moho depth increases to beyond the bottom of the record section at 12 s. There are no direct indications for deep-reaching faults such as the Trans-European Fault in the north. The North German Massif acted as a ramp towards the Variscan Orogeny, similar to the London-Brabant Massif further west.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号