共查询到20条相似文献，搜索用时 80 毫秒
1.
Kevin P. Norton Friedhelm von Blanckenburg Roman DiBiase Fritz Schlunegger Peter W. Kubik 《International Journal of Earth Sciences》2011,100(5):1163-1179
Denudation rates from cosmogenic 10Be measured in quartz from recent river sediment have previously been used in the Central Alps to argue that rock uplift occurs
through isostatic response to erosion in the absence of ongoing convergence. We present new basin-averaged denudation rates
from large rivers in the Eastern and Southern European Alps together with a detailed topographic analysis in order to infer
the forces driving erosion. Denudation rates in the Eastern and Southern Alps of 170–1,400 mm ky−1 are within a similar range to those in the Central Alps for similar lithologies. However, these denudation rates vary considerably
with lithology, and their variability generally increases with steeper landscapes, where correlations with topographic metrics
also become poorer. Tertiary igneous rocks are associated with steep hillslopes and channels and low denudation rates, whereas
pre-Alpine gneisses usually exhibit steep hillslopes and higher denudation rates. Molasse, flysch, and schists display lower
mean basin slopes and channel gradients, and, despite their high erodibility, low erosion rates. Exceptionally low denudation
rates are also measured in Permian rhyolite, which has high mean basin slopes. We invoke geomorphic inheritance as a major
factor controlling erosion, such that large erosive glaciers in the late Quaternary cold periods were more effective in priming
landscapes in the Central Alps for erosion than in the interior Eastern Alps. However, the difference in tectonic evolution
of the Eastern and Central Alps potentially adds to differences in their geomorphic response; their deep structures differ
significantly and, unlike the Central Alps, the Eastern Alps are affected by ongoing tectonic influx due to the slow motion
and rotation of Adria. The result is a complex pattern of high mountain erosion in the Eastern Alps, which has evolved from
one confined to the narrow belt of the Tauern Window in late Tertiary time to one affecting the entire underthrust basement,
orogenic lid, and parts of the Southern Alps today. 相似文献
2.
Erosion-driven uplift of the modern Central Alps 总被引：2，自引：0，他引：2
Jean-Daniel Champagnac Fritz Schlunegger Kevin Norton Friedhelm von Blanckenburg Luca M. Abbühl Marco Schwab 《Tectonophysics》2009,474(1-2):236
We present a compilation of data of modern tectono-geomorphic processes in the Central European Alps which suggest that observed rock uplift is a response to climate-driven denudation. This interpretation is predominantly based on the recent quantification of basin-averaged Late Holocene denudation rates that are so similar to the pattern and rates of rock uplift rates as determined by geodetic leveling. Furthermore, a GPS data-based synthesis of Adriatic microplate kinematics suggests that the Central Alps are currently not in a state of active convergence. Finally, we illustrate that the Central Alps have acted as a closed system for Holocene redistribution of sediment in which the peri-Alpine lakes have operated as a sink for the erosional products of the inner Central Alps.While various hypotheses have been put forward to explain Central Alpine rock uplift (e.g. lithospheric forcing by convergence, mantle processes, or ice melting) we show with an elastic model of lithospheric deformation, that the correlation between erosion and rock uplift rates reflects a positive feedback between denudation and the associated isostatic response to unloading. Thus, erosion does not passively respond to advection of crustal material as might be the case in actively converging orogens. Rather, we suggest that the geomorphic response of the Alpine topography to glacial and fluvial erosion and the resulting disequilibrium for modern channelized and associated hillslope processes explains much of the pattern of modern denudation and hence rock uplift. Therefore, in a non-convergent orogen such as the Central European Alps, the observed vertical rock uplift is primarily a consequence of passive unloading due to erosion. 相似文献
3.
Structure of the lithosphere beneath the Eastern Alps (southern sector of the TRANSALP transect) 总被引：1，自引：0，他引：1
Alberto Castellarin Rinaldo Nicolich Roberto Fantoni Luigi Cantelli Mattia Sella Luigi Selli 《Tectonophysics》2006,414(1-4):259
The interpretation of the seismic Vibroseis and explosive TRANSALP profiles has examined the upper crustal structures according to the near-surface geological evidences and reconstructions which were extrapolated to depth. Only the southern sector of the TRANSALP transect has been discussed in details, but its relationship with the whole explored chain has been considered as well. The seismic images indicate that pre-collision and deep collision structures of the Alps are not easily recognizable. Conversely, good records of the Neo-Alpine to present architecture were provided by the seismic sections.Two general interpretation models (“Crocodile” and “Extrusion”) have been sketched by the TRANSALP Working Group [2002]. Both illustrate the continental collision producing strong mechanical interaction of the facing European and African margins, as documented by giant lithosphere wedging processes. Arguments consistent with the “Extrusion” model and with the indentation of Adriatic (Southalpine) lithosphere underneath the Tauern Window (TW) are:
- – According to the previous DSS reconstructions, the Bouguer anomalies and the Receiver Functions seismological data, the European Moho descends regularly attaining a zone south of the Periadriatic Lineament (PL). The Moho boundary and its geometry appear to be rather convincing from images of the seismic profile;
- – the Tauern Window intense uplift and exhumation is coherent with the strong compression regime, which acted at depth, thus originating the upward and lateral displacement of the mobile and ductile Penninic masses according to the “Extrusion” model;
- – the indentation of the Penninic mobile masses within the colder and more rigid Adriatic crust cannot be easily sustained. Wedging of the Adriatic stiffened lower crust, under high stresses and into the weaker Penninic domain, can be a more suitable hypothesis. Furthermore, the intrusion of the European Penninic crustal wedge underneath the Dolomites upper crust is not supported by any significant uplifting of the Dolomites. The total average uplift of the Dolomites during the Neogene appears to be 6−7 times smaller than that recognized in the TW. Markedly the northward dip of the PL, reaching a depth of approximately 20 km, is proposed in our interpretation;
- – finally, the Adriatic upper crustal evolution points to the late post-collision change in the tectonic grow-up of the Eastern Alps orogenic chain. The tectonic accretion of the northern frontal zone of the Eastern and Central Alps was interrupted from the Late Miocene (Serravallian–Tortonian) onward, as documented by the Molasse basin evolution. On the contrary, the structural nucleation along the S-vergent tectonic belt of the eastern Southern Alps (Montello–Friuli thrust belt) severely continued during the Messinian and the Plio–Pleistocene. This structural evolution can be considered to be consistent with the deep under-thrusting and wedge indentation of the Adriatic lithosphere underneath the southern side of the Eastern Alps thrust-and-fold belt.
4.
A. Scharf M. R. Handy S. Favaro S. M. Schmid A. Bertrand 《International Journal of Earth Sciences》2013,102(6):1627-1654
The Tauern Window exposes a Paleogene nappe stack consisting of highly metamorphosed oceanic (Alpine Tethys) and continental (distal European margin) thrust sheets. In the eastern part of this window, this nappe stack (Eastern Tauern Subdome, ETD) is bounded by a Neogene system of shear (the Katschberg Shear Zone System, KSZS) that accommodated orogen-parallel stretching, orogen-normal shortening, and exhumation with respect to the structurally overlying Austroalpine units (Adriatic margin). The KSZS comprises a ≤5-km-thick belt of retrograde mylonite, the central segment of which is a southeast-dipping, low-angle extensional shear zone with a brittle overprint (Katschberg Normal Fault, KNF). At the northern and southern ends of this central segment, the KSZS loses its brittle overprint and swings around both corners of the ETD to become subvertical, dextral, and sinistral strike-slip faults. The latter represent stretching faults whose displacements decrease westward to near zero. The kinematic continuity of top-east to top-southeast ductile shearing along the central, low-angle extensional part of the KSZS with strike-slip shearing along its steep ends, combined with maximum tectonic omission of nappes of the ETD in the footwall of the KNF, indicates that north–south shortening, orogen-parallel stretching, and normal faulting were coeval. Stratigraphic and radiometric ages constrain exhumation of the folded nappe complex in the footwall of the KSZS to have begun at 23–21 Ma, leading to rapid cooling between 21 and 16 Ma. This exhumation involved a combination of tectonic unroofing by extensional shearing, upright folding, and erosional denudation. The contribution of tectonic unroofing is greatest along the central segment of the KSZS and decreases westward to the central part of the Tauern Window. The KSZS formed in response to the indentation of wedge-shaped blocks of semi-rigid Austroalpine basement located in front of the South-Alpine indenter that was part of the Adriatic microplate. Northward motion of this indenter along the sinistral Giudicarie Belt offsets the Periadriatic Fault and triggered rapid exhumation of orogenic crust within the entire Tauern Window. Exhumation involved strike-slip and normal faulting that accommodated about 100 km of orogen-parallel extension and was contemporaneous with about 30 km of orogen-perpendicular, north–south shortening of the ETD. Extension of the Pannonian Basin related to roll-back subduction in the Carpathians began at 20 Ma, but did not affect the Eastern Alps before about 17 Ma. The effect of this extension was to reduce the lateral resistance to eastward crustal flow away from the zone of greatest thickening in the Tauern Window area. Therefore, we propose that roll-back subduction temporarily enhanced rather than triggered exhumation and orogen-parallel motion in the Eastern Alps. Lateral extrusion and orogen-parallel extension in the Eastern Alps have continued from 12 to 10 Ma to the present and are driven by northward push of Adria. 相似文献
5.
Exhumation has been recognised as a key factor in understanding the dynamics of a mountain belt. Normal faulting, erosion and ductile thinning are the three basic mechanisms to exhume the deeper high grade metamorphic rocks to the surface. Convergent orogenic belts are characterised by over-thickening of the crust due to thrusting and folding. The interplay of uplift due to over-thickening of crust and climatic-erosion is the most plausible mechanism of exhumation as suggested by the numerical models and analogue experiments. The analysis of 534 thermo-chronological dates through 1D-thermal numerical model in the Himalaya suggest that the exhumation is dominantly due to erosion but the pattern of erosion is controlled by local tectonic activities in different sector of the Himalaya since Miocene, indicating that tectonic force as the prime mechanism of exhumation in Himalaya. 相似文献
6.
Basic concepts of structural restoration are applied to crustal cross-sections through mountain belts to explore large-scale tectonic models and deep structure. However, restored sections should account for variations in pre-orogenic crustal thicknesses. Crustal balancing approaches are reviewed and applied to two Alpine sections, coinciding with deep seismic experiments: NRP-20 East (Central Alps) and ECORS-CROP (Western Alps). Existing studies assume large (>300 km) orogenic contraction and only moderately thinned pre-orogenic crust. The resulting restored sections contain more crust than is imaged beneath the present-day Alps, the missing crust generally assumed to be subducted. Two kinematic modifications reduce the requirement for subduction: thinning and buoyancy-driven return flow of ultra-high-pressure metamorphic rocks during orogenesis; and pre-orogenic hyperextension. Using large stretching factors for the pre-orogenic crust negates crustal subduction on both Alpine transects. If the lower crust was approximately rigid, restorations of the Central Alps require strongly depth-heterogeneous stretching of upper and lower crust during Mesozoic rifting. Relaxing this requirement allows uniform lithospheric stretching, a corollary consistent with published subsidence estimates. Restorations make implicit statements on the form of pre-orogenic basins and the structure of continental margins incorporated into mountain belts that can in turn provide tests of tectonic models. 相似文献
7.
《Physics and Chemistry of the Earth, Part A: Solid Earth and Geodesy》1999,24(8):675-680
The exhumation of metamorphic domes within orogenic belts is exemplified by the Tauern window in the Eastern Alps. There, the exhumation is related to partitioning of final orogenic shortening into deep-seated thrusts, near-surface antiformal bending forming brachyanticlines, and almost orogen-parallel strike-slip faults due to oblique continental plate collision. Crustal thickening by formation of an antiformal stack within upper to middle crustal portions of the lower lithosphere is a prerequisite of late-stage orogenic window formation. Low-angle normal faults at releasing steps of crustal-scale strike-slip faults accomodate tectonic unloading of synchronously thickened crust and extension along strike of the orogen, forming pull-apart metamorphic domes. Initiation of low-angle normal faults is largely controlled by rock rheology, especially at the brittle-ductile transitional level within the lithosphere. Several mechanisms may contribute to uplift and exhumation of previously buried crust within such a setting: (1) Shortening along deep-seated blind thrusts results in the formation of brachyanticlines and bending of metamorphic isograds; (2) oversteps of strike-slip faults within the wrench zone control the final geometry of the window; (3) unloading by tectonic unroofing and erosional denudation; and (4) vertical extrusion of crustal scale wedges. Rapid decompression of previously buried crust results in nearly isothermal exhumation paths, and enhanced fluid circulation along subvertical tensile fractures (hydrothermal ore and silicate veins) that formed due to overall coaxial stretching of lower plate crust. 相似文献
8.
The transition between European and Adriatic crust is an important feature related to the plate collision that formed the European Alps. The diversity of seismic and geological information allows the construction of two alternative 3D density models, which both match the observed gravity field. Different seismic experiments suggest a thickness for the Adriatic crust between 30 and 40 km. The thick crust model requires an unusually dense lower crust (>3050 kg/m3) to reproduce the observed Bouguer anomaly. To evaluate the two alternative models, the isostatic implications of the geometry and density distribution within both 3D models are investigated, using local (Airy) and regional (Vening Meinesz) isostasy.Airy isostatic investigations show that the Eastern Alps are not isostatically compensated and the residuals correlate strongly with exposed geological formations. Subsequently, subsurface loading is an important factor controlling isostatic processes. The different geometry and densities in the two 3D models imply different loading at the crust–mantle boundary. The subsurface loads calculated from the 3D density models were used to estimate regional isostasy by a convolution method. In general, small rigidity values (D<10×1021 Nm) are determined for the Eastern Alpine lithosphere. In the model with a 40-km-thick Adriatic crust, high flexural rigidities are inferred for the Adriatic plate (>100×1021 Nm), but these values are unusual for an active orogenic region. The results point to the interfingering of European and Adriatic crust that results in the squeezing of European crust between Adriatic crust and mantle with additional contamination by mantle material. 相似文献
9.
Albrecht Steck Franco Della Torre Franz Keller Hans-Rudolf Pfeifer Johannes Hunziker Henri Masson 《Swiss Journal of Geoscience》2013,106(3):427-450
The Lepontine dome represents a unique region in the arc of the Central and Western Alps, where complex fold structures of upper amphibolite facies grade of the deepest stage of the orogenic belt are exposed in a tectonic half-window. The NW-verging Mont Blanc, Aar und Gotthard basement folds and the Lower Penninic gneiss nappes of the Central Alps were formed by ductile detachment of the upper European crust during its Late Eocene–Early Oligocene SE-directed underthrust below the upper Penninic and Austroalpine thrusts and the Adriatic plate. Four underthrust zones are distinguished in the NW-verging stack of Alpine fold nappes and thrusts: the Canavese, Piemont, Valais and Adula zones. Up to three schistosities S1–S3, folds F1–F3 and a stretching lineation XI with top-to-NW shear indicators were developed in the F1–F3 fold nappes. Spectacular F4 transverse folds, the SW-verging Verzasca, Maggia, Ziccher, Alpe Bosa and Wandfluhhorn anticlines and synclines overprint the Alpine nappe stack. Their formation under amphibolite facies grade was related to late ductile folding of the southern nappe roots during dextral displacement of the Adriatic indenter. The transverse folding F4 was followed since 30 Ma by the pull-apart exhumation and erosion of the Lepontine dome. This occurred coevally with the formation of the dextral ductile Simplon shear zone, the S-verging backfolding F5 and the formation of the southern steep belt. Exhumation continued after 18 Ma with movement on the brittle Rhone-Simplon detachment, accompanied by the N-, NW- and W-directed Helvetic and Dauphiné thrusts. The dextral shear is dated by the 29–25 Ma crustal-derived aplite and pegmatite intrusions in the southern steep belt. The cooling by uplift and erosion of the Tertiary migmatites of the Bellinzona region occurred between 22 and 18 Ma followed by the exhumation of the Toce dome on the brittle Rhone–Simplon fault since 18 Ma. 相似文献
10.
大陆下地壳流动:渠流还是层流? 总被引：1，自引：1，他引：0
大量的地质、地球物理、地球化学、实验和模拟资料证明大陆岩石圈存在壳内流层,目前创建了渠流和层流两种假说来解释大陆下地壳的流动规律和流动机理。渠流模式是指厚地壳、高地势的造山带或高原中、下地壳低粘度物质在地貌负荷的侧向压力梯度或剥蚀作用驱动下从山根向外侧向扩张。笔者在研究青藏高原的基础上于1992年提出的层流模式是指在大陆边缘俯冲板片脱水熔融和大陆内部地幔柱(枝)底辟上隆的热动力及其相关的重力驱动下的盆山地壳物质循环系统,盆地热软化下地壳物质在重力作用下顺层流向相邻的山根,盆地地壳减薄,造山带地壳加厚,加厚的下地壳部分熔融物质带动深层变质岩向上运动,热-重力派生的垂直主应力形成热隆伸展的变质核杂岩和低角度拆离断层,隆升的山体在重力势能作用下侧向扩张,盆山边界形成逆冲推覆和滑覆构造,同时遭受强烈的剥蚀作用,造山带源粗碎屑沉积物快速堆积在盆缘受下地壳拖曳的壳内有限俯冲坳陷带内。渠流构造和层流构造在大陆板内变形、中下地壳韧性挤出、造山带的挤压和伸展同步转换、中深变质岩的韧性变形及剥露过程、部分熔融及岩浆活动等方面存在相似之处,但是,在发育背景、产出部位、流层边界、流层规模、流动型式、流动体制、流动方向、流动物质、流动效应、流动时间、驱动力等方面存在本质的差异。渠流构造基本上可作为层流构造时空结构中的一个组成部分,层流的驱动力是热能和重力,而不是地表剥蚀作用和山体负荷作用。从全球角度来看,层流只是地球多级物质循环流动系统的一个组成部分。 相似文献
11.
龙门山晚新生代均衡反弹隆升的定量研究 总被引：1，自引：0，他引：1
龙门山位于青藏高原东缘与四川盆地的交接部位,是青藏高原周边山脉中地形梯度变化最大的山脉,其隆升过程和机制一直是国际地学界关注的焦点。晚新生代经过大量的滑坡、泥石流等快速剥蚀作用,龙门山的高程却不断升高。讨论了龙门山构造隆升的3种地球动力学机制,即下地壳通道流机制、地壳挤压缩短变形机制、地壳均衡反弹机制。晚新生代龙门山的隆升与剥蚀引起的均衡反弹作用相关,剥蚀作用使得地壳岩石逐步被移去,剥蚀区重力损失,岩石圈或地壳卸载作用导致山脉顶峰的隆升。结合数字高程模型数据研究表明,巨大地震的长期同震构造变形以及滑坡、泥石流等引起的快速剥蚀所导致的地壳均衡反弹,可能是龙门山晚新生代构造隆升的地球动力学新机制。龙门山地区现今高程受构造作用与剥蚀引起的均衡反弹作用的共同影响,其中剥蚀引起的均衡反弹作用对龙门山隆升的影响贡献率约占30%。 相似文献
12.
洋壳深俯冲超高压变质作用研究及其地质意义 总被引：1，自引：0，他引：1
洋壳深俯冲经历超高压变质作用的岩石比较稀少,是目前超高压变质作用研究的重要前沿领域,有关这方面的研究对于建立新的冷俯冲带变质作用类型、探讨地幔水流体的成因、建立更广泛的超高压变质岩石的抬升机制具有重要意义。另外,洋壳深俯冲高压变质带往往与低压高温变质带组成双变质带,对双变质带的深入研究对于完整地重塑俯冲碰撞造山带的形成演化过程具有重要意义。简要地介绍了新疆西天山洋壳深俯冲超高压变质带的研究现状和存在的问题。 相似文献
13.
We present a synoptic overview of the Miocene-present development of the northern Alpine foreland basin (Molasse Basin), with
special attention to the pattern of surface erosion and sediment discharge in the Alps. Erosion of the Molasse Basin started
at the same time that the rivers originating in the Central Alps were deflected toward the Bresse Graben, which formed part
of the European Cenozoic rift system. This change in the drainage direction decreased the distance to the marine base level
by approximately 1,000 km, which in turn decreased the average topographic elevation in the Molasse Basin by at least 200 m.
Isostatic adjustment to erosional unloading required ca. 1,000 m of erosion to account for this inferred topographic lowering.
A further inference is that the resulting increase in the sediment discharge at the Miocene–Pliocene boundary reflects the
recycling of Molasse units. We consider that erosion of the Molasse Basin occurred in response to a shift in the drainage
direction rather than because of a change in paleoclimate. Climate left an imprint on the Alpine landscape, but presumably
not before the beginning of glaciation at the Pliocene–Pleistocene boundary. Similar to the northern Alpine foreland, we do
not see a strong climatic fingerprint on the pattern or rates of exhumation of the External Massifs. In particular, the initiation
and acceleration of imbrication and antiformal stacking of the foreland crust can be considered solely as a response to the
convergence of Adria and Europe, irrespective of erosion rates. However, the recycling of the Molasse deposits since 5 Ma
and the associated reduction of the loads in the foreland could have activated basement thrusts beneath the Molasse Basin
in order to restore a critical wedge. In conclusion, we see the need for a more careful consideration of both tectonic and
climatic forcing on the development of the Alps and the adjacent Molasse Basin. 相似文献
14.
《Sedimentary Geology》2001,139(3-4):217-228
The clastic wedge of the Gonfolite Lombarda Group (GLW) accumulated during Oligocene–Miocene times in the Southern Alps foreland basin, formed on the southern, inner side of the Alpine belt. It represents the depositional counterpart of the exhumation and erosion of the Central Alps metamorphic–magmatic units.Among the Central Alps units, the Tertiary Bergell Intrusion (TBI) is one of the principal sources of pebbles occurring within the GLW. Geochronologic data, both from intrusive pebbles and present-day outcrops of intrusive rocks, document the rapid uplift history of the GLW source area.The lower Gonfolite clastic wedge (Como Conglomerate and Val Grande Sandstone Formations, Oligocene–Early Miocene) has been investigated through the study of sandstone and conglomerate petrology for detecting the effects in the sedimentary record of this collision-related event.The main results are: (i) sandstone petrology of the Como Conglomerate records an evolution from feldspatholithic to feldspathic sandstones; (ii) the related Q/F–F/L ratios suggest an evolution from a mixed plutonic–metamorphic to a mainly plutonic source; (iii) consistently, conglomerate petrology records a progressive increase of plutonic pebbles (from nearly 0–50% of the total), a corresponding decrease of metamorphic clasts (from nearly 80 to nearly 50%) and the disappearance of cover rock fragments. Considering the high relief/short transport setting of the GLW clastic routing system, these values probably resemble the real proportions of such rocks in the Gonfolite catchment area.During the Aquitanian, the return to a metamorphic-rich source is recorded both by sandstones and conglomerates at the top of the Como Conglomerate and in the Val Grande Sandstone. This last signal is interpreted as the result of the reorganisation of the Gonfolite source area, possibly related to the northward shift of the main Alpine divide. 相似文献
15.
大陆岩石圈深俯冲作用是地球科学领域的前沿热点,榴辉岩的折返机制是板块构造及动力学的关键科学问题。全球著名的大陆造山带中榴辉岩的p-T轨迹呈现差异性折返特征,为了揭示榴辉岩的折返机制,本文结合变质岩石学和地球物理学研究,选取3个典型大陆造山带——中生代—新生代的阿尔卑斯造山带、中生代的苏鲁—大别造山带和新生代的喜马拉雅造山带中的榴辉岩进行阐述。在阿尔卑斯造山带地区,地球物理研究结果发现,欧洲板块的俯冲造成了Adria地区下方的岩石圈存在明显厚度差异。同时,阿尔卑斯造山带Doria Maria和Pohorje地区以及Pohorje地区内部,榴辉岩折返历史也不尽相同,原因可能是亚德里亚大洋岩石圈断离后不同期次的逆冲推覆作用使其差异性斜向挤出。苏鲁—大别造山带中榴辉岩的快速折返,原因可能是华南板块与华北板块碰撞后岩石圈的拆沉或断离作用。在喜马拉雅造山带,西构造结和中喜马拉雅榴辉岩的折返存在差异性。在西构造结,那让和卡甘榴辉岩呈现不同的p-T轨迹和折返速率,变质岩石学和地球物理研究结果都表明它们的差异性折返很可能与印度-欧亚大陆碰撞过程中的构造挤压作用以及印度大陆岩石圈的断离作用有关。喜马拉雅造山带是年轻的正在进行造山活动的造山带,相较于古老的苏鲁-大别造山带,它更适合变质岩石学和地球物理学的综合研究。因此西构造结高压/超高压榴辉岩的折返机制——构造挤压和俯冲板块断离可应用于全球造山带。 相似文献
16.
Pressure--Temperature--Time Paths of Regional Metamorphism I. Heat Transfer during the Evolution of Regions of Thickened Continental Crust 总被引：5，自引：0，他引：5
The development of regional metamorphism in areas of thickenedcontinental crust is investigated in terms of the major controlson regional-scale thermal regimes. These are: the total radiogenicheat supply within the thickened crust, the supply of heat fromthe mantle, the thermal conductivity of the medium and the lengthand time scales of erosion of the continental crust. The orogenicepisode is regarded as consisting of a relatively rapid phaseof crustal thickening, during which little temperature changeoccurs in individual rocks, followed by a lengthier phase oferosion, at the end of which the crust is at its original thickness.The principal features of pressure—temperature—time(PTt) paths followed by rocks in this environment are a periodof thermal relaxation, during which the temperature rises towardsthe higher geotherm that would be supported by the thickenedcrust, followed by a period of cooling as the rock approachesthe cold land surface. The temperature increase that occursis governed by the degree of thickening of the crust, its conductivityand the time that elapses before the rock is exhumed sufficientlyto be affected by the proximity of the cold upper boundary.For much of the parameter range considered, the heating phaseencompasses a considerable portion of the exhumation (decompression)part of the PTt path. In addition to the detailed calculationof PTt paths we present an idealized model of the thickeningand exhumation process, which may be used to make simple calculationsof the amount of heating to be expected during a given thickeningand exhumation episode and of the depth at which a rock willstart to cool on its ascent path. An important feature of thesePTt paths is that most of them lie within 50 °C of the maximumtemperature attained for one third or more of the total durationof their burial and uplift, and for a geologically plausiblerange of erosion rates the rocks do not begin to cool untilthey have completed 20 to 40 per cent of the total uplift theyexperience. Considerable melting of the continental crust isa likely consequence of thickening of crust with an averagecontinental geotherm. A companion paper discusses these resultsin the context of attempts to use metamorphic petrology datato give information on tectonic processes. 相似文献
17.
三维P波速度解析研究结果表明，苏鲁-大别超高压变质带岩石圈地壳速度结构均具有上地壳明显高速且上凸、中地壳增厚、下地壳埋藏较深且莫霍面下凹等基本特征。与大别地区相比较，苏鲁超高压变质带存在着上地壳波速更高，且地表高速区面积与上地壳高速体体积大于大别；而莫霍面下凹程度不如大别地区，地壳山根已逐步趋向消失等独特的区域特征。显示了苏鲁地区曾发生过更激烈的俯冲与折返构造运动，与大别地区相比，有更多高速、高密度的超高压变质岩折返到上地壳与地表；然而在造山运动过程中比大别更早进入了造山运动后期等特征。对比研究结果表明，苏鲁-大别地段的造山、演化过程中，在构造运动基本相似的背景下，存在着区域性特征。苏鲁地区的造山运动以及超高压变质作用，有起始略晚、发生时期较短但相对激烈、结束早、比大别更早进入了造山运动的后期等特征。笔者分析了苏鲁区域性特征形成的主要构造原因是，郯庐断裂带的大规模左旋走滑运动以及通过中国华北区域的大范围NXV—SE向扩张应力场的影响。其中，中生代以来大华北地区的大区域扩张应力场的影响可能是该区俯冲到地幔内的超高压变质岩能够大量折返回地表或上地壳的重要构造原因。 相似文献
18.
A numerical modelling approach is used to validate the physical and geological reliability of the ablative subduction mechanism during Alpine convergence in order to interpret the tectonic and metamorphic evolution of an inner portion of the Alpine belt: the Austroalpine Domain. The model predictions and the natural data for the Austroalpine of the Western Alps agree very well in terms of P–T peak conditions, relative chronology of peak and exhumation events, P–T–t paths, thermal gradients and the tectonic evolution of the continental rocks. These findings suggest that a pre‐collisional evolution of this domain, with the burial of the continental rocks (induced by ablative subduction of the overriding Adria plate) and their exhumation (driven by an upwelling flow generated in a hydrated mantle wedge) could be a valid mechanism that reproduces the actual tectono‐metamorphic configuration of this part of the Alps. There is less agreement between the model predictions and the natural data for the Austroalpine of the Central‐Eastern Alps. Based on the natural data available in the literature, a critical discussion of the other proposed mechanisms is presented, and additional geological factors that should be considered within the numerical model are suggested to improve the fitting to the numerical results; these factors include variations in the continental and/or oceanic thickness, variation of the subduction rate and/or slab dip, the initial thermal state of the passive margin, the occurrence of continental collision and an oblique convergence. 相似文献
19.
Wolfgang Franke 《International Journal of Earth Sciences》2014,103(5):1471-1499
The Variscan orogenic collage consists of three subduction-collision systems (Rheno-Hercynian, Saxo-Thuringian and Massif Central-Moldanubian). Devonian to early Carboniferous marine strata are widespread not only in the individual foreland fold and thrust belts, but also in post-tectonic basins within these foreland belts and on the Cadomian crust of peri-Gondwanan microcontinental fragments, which represent the upper plates of the subduction/collision zones. These marine basins preclude high elevations in the respective areas and also in their neighbourhood. Widespread late Carboniferous intra-montane basins with their coal-bearing sequences are likewise incompatible with high and dry plateaus. While narrow belts with high elevations remain possible along active margins within the orogen, comparison of the Variscides with the Himalaya/Tibetan plateau is unfounded. Plausible reasons for the scarcity of high Variscan relief include subduction of oceanic and even continental crust, subduction erosion, orogen-parallel extension and—most important—lithospheric thinning accompanied by high heat flow and magmatism. In many areas, timing and areal array of magmatism and HT metamorphism are not compatible with a model of tectonic thickening and subsequent gravitational collapse. It is suggested, instead, that lithospheric thinning and heating are due to mantle activities caused by the Tethys rift. The lower and middle crust were thermally softened and rendered unfit for stacking and isostatic uplift: in terms of topography, the Variscides represent a failed orogen. The HT regime also explains the abundance of granitoids and HT/LP metamorphic rocks typical of the Variscides. Melting in the HT regime extracted mafic components from Variscan and Cadomian crust as well as from Cadomian metasomatized lithospheric mantle, thus mimicking subduction-related magmatism. The onset of the HT regime at c. 340 Ma may also have triggered the final ascent of HP/UHP felsic metamorphic rocks. 相似文献
20.
苏北—鲁东南高压,超高压变质带剥露过程中伸展构造作用 总被引：7，自引：2，他引：5
尽管许多地质学家提出了不同的超高压变质岩石形成与折返模式,但高压、超高压变质岩折返与剥露机制仍是大陆造山带动力学研究中的热点和焦点问题。本文明确提出并研究了分布于苏北－胶南变质岩区西北和北部边缘的地壳规模的拆离伸展型韧性剪切带。通过韧性剪切带几何学、运动学、变形环境分析和形成时代的讨论,认为与高压、超高压变质带展布方向斜交的斜向伸展构造作用,是苏北－鲁东南高压、超高压变质带从中地壳抬升至地表的主导 相似文献