共查询到10条相似文献，搜索用时 187 毫秒
1.
《Geomechanics and Geoengineering》2013,8(2):163-169
In this paper, a new probabilistic approach has been proposed for dealing with the wide scatter in laboratory values of compressive strength test (uni-axial and tri-axial compressive strength tests) data of rock specimens. This wide scatter is essentially due to randomness in number as well as orientation of micro-cracks. In the proposed methodology, Stanley's approach, which uses Weibull's theory based on the weakest link model, has been modified to analyse the compressive strength test data. Stanley's approach is applicable to poly-axial tensile stress conditions. Design of all underground excavations requires, as input data, uni-axial compressive strength and the strength under poly-axial stress conditions. Data from compressive strength tests have been analysed using Weibull's theory and the proposed approach. Corresponding cumulative distribution functions of the state variable, i.e., the applied stress level, have been obtained and goodness-of-fit tests performed to check the fitness of test data to these statistical distributions. These cumulative distribution functions have been subsequently invoked to correlate the applied stress level at failure and the associated risk of failure. The analysis finds its application in specifying the design strength of rocks or rock masses for a permissible probability of failure. 相似文献
2.
基于一种脆性指标确定岩石残余强度 总被引：1，自引：0，他引：1
岩石的残余强度是岩石力学的重要指标,准确地评价岩石残余强度对于评价地下工程的稳定性以及优化岩体支护设计具有重要意义。基于岩石的三轴力学特性提出一种表征岩石峰后强度衰减行为的力学指标--岩石强度衰减系数,该指标可反映岩石的脆性程度,并提出岩石强度衰减系数与围压关系的幂函数模型。对22组不同成因的岩石常规三轴压缩试验数据进行幂函数模型参数拟合,发现不同岩石拟合所得参数离散性较大,分析其原因主要与岩石矿物组成和岩石结构特征等因素相关。在此基础上提出基于强度衰减方法确定岩石残余强度的方法,分析表明,该方法能够很好地拟合岩石残余强度试验数据,并能反映岩石结构性质对残余强度的影响。 相似文献
3.
基于Hoek-Brown强度准则及量化GSI围岩评级系统,分析岩体强度弱化行为,总结出确定岩体峰值及峰后强度参数的方法,提出应变软化模型的简化计算方法,并以FLAC3D数值模拟软件为工具,采用收敛-约束法对深埋大断面隧道支护结构及围岩稳定性进行分析,计算出支护结构安全系数。通过分析得出：随着围岩应力释放,岩体软化参数随之减小,岩体强度弱化行为突出;高地质强度GSI指标（GSI=75）的岩体虽然强度弱化程度较大,但围岩的变形量仍然较小,而低GSI指标（GSI=25）的岩体表现出了理想弹塑性行为;提出的简化Hoek-Brown应变软化模型适合应用于隧道中岩质相近区段围岩的研究;采用收敛-约束法对隧道支护结构的稳定性进行分析,可为隧道工程的初期支护优化设计及安全性评价提供参考。 相似文献
4.
5.
节理岩体卸荷强度特性的试验研究 总被引：2，自引：0，他引：2
卸荷状态工程岩体的强度特性与传统的加载岩体有本质的区别。目前对于岩石卸荷强度特性的研究比较多见,但对于含节理的岩体在卸荷应力状态下的强度特性,尤其是节理面对其强度的影响研究实属少见。本文通过岩体三轴模拟试验研究了卸荷应力状态下节理岩体的破坏特征,突出考虑了节理面性质对卸荷强度的影响,在此基础上提出了节理岩体卸荷强度准则的一般表达式并进行了对比验证。 相似文献
6.
在一定的外界荷载作用下,岩石材料的强度会随时间不断降低,在工程上常表现为由于强度的弱化而导致岩体的突发性破坏行为以及岩体的长期强度等不同现象和问题。因此,岩石强度的时间效应研究对岩体工程施工安全和工程长期稳定性都具有重要的指导意义。在对大量试验结果分析的基础上,总结了岩石强度演化规律与内在机制,发现岩石强度的损失与岩石本身的固有强度、所受应力状态（屈服接近度）以及应力作用的持续时间有关,在此基础上,提出了以岩石凝聚力和内摩擦角随上述因素变化为核心的岩石强度时效性演化模型。通过对多组试验数据的模拟分析表明,提出的岩石强度时效性演化模型能很好地描述岩石强度的演化规律,可以较好地定量反映不同应力水平下岩石强度弱化过程,且物理意义明确,为岩石强度的时间效应研究开拓了一个新的思路和方法。 相似文献
7.
节理的剪切强度涉及到岩体工程的安全。通过CSS–342岩体剪切试验机对3组具有不同形貌特征的节理进行直剪试验,研究形貌对剪切强度的影响。试验结果表明：峰值剪切强度随法向应力和粗糙程度的增加而增加;但就相同的形貌而言,剪切应力与法向应力的比值减小,即由形貌产生的剪胀角随法向应力的增加而减小。通过分析剪胀角存在的边界条件,提出双曲线形式的剪胀角演化模型,并采用抗拉强度体现岩石的性质对节理剪切强度的影响。采用坡度均方根表征节理的三维形貌特征并提出相应的峰值剪切强度公式,与经典的Barton公式进行了比较,总体上新公式的计算值更为接近试验值。 相似文献
8.
L. Zhang 《Rock Mechanics and Rock Engineering》2008,41(6):893-915
Summary Although the Hoek–Brown strength criterion has been widely used in rock mechanics and rock engineering, it does not take account
of the influence of the intermediate principal stress. Much evidence, however, has been accumulating to indicate that the
intermediate principal stress does influence the rock strength in many instances. Therefore, researchers have developed three-dimensional
(3D) versions of the Hoek–Brown strength criterion. In this paper, three existing 3D versions of the Hoek–Brown strength criterion
are reviewed and evaluated. The evaluation shows that all of the three 3D versions of the Hoek–Brown strength criterion have
limitations. To address the limitations, a generalized 3D Hoek–Brown criterion is proposed by modifying the generalized Hoek–Brown
strength criterion. The proposed 3D criterion not only inherits the advantages of the Hoek–Brown strength criterion but can
take account of the influence of the intermediate principal stress. At a 2D stress state (triaxial or biaxial), the proposed
3D criterion will simply reduce to the form of the generalized Hoek–Brown strength criterion. To validate the proposed 3D
strength criterion, polyaxial or true triaxial compression test data of intact rocks and jointed rock masses has been collected
from the published literature. Predictions of the proposed generalized 3D Hoek–Brown strength criterion are in good agreement
with the test data for a range of different rock types. The difference of the proposed generalized 3D Hoek–Brown strength
criterion from and its advantages over the existing 3D versions of the Hoek–Brown strength criterion are also discussed. It
should be noted that the proposed 3D criterion is empirical in nature because it is an extension of the 2D Hoek–Brown strength
criterion, which is empirical. Because of the non-convexity of the yield surface for a biaxial stress state, the proposed
3D criterion may have problems with some stress paths.
Correspondence: L. Zhang, Department of Civil Engineering and Engineering Mechanics, The University of Arizona, Tucson, Arizona
85721, USA 相似文献
9.
Development of a probabilistic approach for rock wedge failure 总被引：5，自引：0，他引：5
For rock slope engineering, uncertainty and variability are inherent in data collected on orientation and strength of discontinuities, yielding a range of results. Unfortunately, conventional deterministic analysis based on the factor of safety concept, requires a fixed representative value for each parameter without regard to the degree of uncertainty involved. Therefore, the deterministic analysis fails to properly represent uncertainty and variability, so common in engineering geology studies. To overcome this shortcoming, the probabilistic analysis method was proposed and used for more than a decade in rock slope stability analysis. However, most probabilistic analyses included a deterministic model as part of the analysis procedure causing subsequent problems, which went uncorrected. The objectives of this paper are to develop a solution for these difficulties in probabilistic analyses and to propose an appropriate simulation procedure for the probabilistic analysis of rock wedge failures. As part of the solution, probability of kinematic instability and probability of kinetic instability are evaluated separately to provide a proper, combined evaluation for failure probability. To evaluate the feasibility of this new probabilistic approach, the procedure is applied to a practical example, a major, highway rock cut in North Carolina, USA. Results of the probabilistic approach are compared to those of the deterministic analysis; findings are significantly different, indicating that the deterministic analysis does not depict rock slope variations, particularly where significant scatter in parameter data occurs. 相似文献
10.
在岩土工程中,裂隙岩体经常处于峰后变形状态,研究裂隙岩体的峰后应力-应变关系对预测结构的稳定性有重要意义。基于峰后软化阶段强度参数的逐渐演化行为,首先提出一个求岩石峰后应力-应变关系和裂隙峰后应力-切向位移关系的一般方法。然后采用摩尔-库仑强度准则,以岩石的最大主应变和裂隙的切向位移作为软化参数,假设强度参数为软化参数的分段线性函数,分岩体沿裂隙滑移破坏和沿岩石剪切破坏两种情况,提出多组贯穿裂隙岩体峰后应力-应变关系式的求法。最后,在算例中,分岩体沿裂隙滑移破坏和沿岩石剪切破坏两种情况给出了裂隙岩体的峰后应力-应变曲线,讨论了裂隙的平均间距、法向刚度和剪切刚度对峰后应变的影响。结果表明,裂隙的平均间距、法向刚度和剪切刚度越小,裂隙岩体的轴向应变越大。 相似文献