共查询到19条相似文献，搜索用时 171 毫秒
1.
一种基于交叉证认技术的自适应小波变换及其在削减GPS多路径误差中的应用 总被引：2，自引：1，他引：1
多路径效应影响是目前限制GPS定位精度进一步提高的瓶颈。提出用交叉证认技术自动识别小波分解的信号层,再通过小波重构实现降噪和信号提取,并将该方法应用于GPS多路径误差的削减中。对模拟数据和实际GPS观测资料的分析表明,该方法能合理分离不同噪声水平下资料序列中的信号和噪声;当噪声水平小于信号振幅的一半时,能成功分离资料序列中的高频信号。同时,运用该方法得到的多路径改正模型和GPS多路径效应的重复性,可有效地削弱多路径效应的影响,提高GPS定位精度。 相似文献
2.
基于GPS多路径时间序列,分别采用Vondrak滤波、经验模式分解(EMD)和小波滤波3种方法构建了GPS多路径误差修正模型,并将其用于削弱多路径效应.通过对模拟数据及实测数据的分析表明,3种方法都能有效地分离不同噪声水平下时间序列中的信号和噪声.同时,利用3种方法构建的多路径修正模型可有效地削弱多路径效应的影响,提高GPS定位精度,但3种方法的优缺点各有不同. 相似文献
3.
利用交叉证认的方法,提出一种新的基于EMD滤波去噪方法,并将其应用于GPS多路径效应的研究中。通过模拟实验及实测数据分析表明,该方法能够自适应地选择IMF中的信号层数,削弱随机噪声,合理地分离信号和噪声。利用该滤波方法去噪并建立具有重复性的多路径误差效应改正模型,可有效地削弱多路径效应的影响,进而提高GPS动态变形监测的精度。 相似文献
4.
5.
对GPS载波相位测量误差进行了理论分析和试验研究。根据噪声特征以及它们对载波相位测量结果的影响，提出了基于自适应噪声抵消与小波滤波相结合的GPS噪声抑止方法。对具有强相关特性的多路径误差采用自适应噪声抵消方法，而对于不相关的高频噪声则通过合理选择小波分解层数对信号进行分解，对作用闽值后的小波系数进行重构，得到最后的变形信号。实测数据分析表明，该方法能有效地削弱多路径效应及测量随机噪声，较用单一方法对GPS数据进行消噪处理有较大的优越性。 相似文献
6.
信号衍射和多路径效应是限制GPS定位精度进一步提高的瓶颈,观测中两者往往同时存在。衍射效应具有不完全重复的特性,为了研究多路径重复性并使其不受信号衍射的影响,本文提出先应用SIGMA-Δ信噪比加权模型削弱信号衍射的影响,再运用改进恒星时滤波法分析多路径重复性。实验观测资料分析表明,SIGMA-Δ模型能有效削弱衍射信号对定位结果影响,并且保留主要的多路径信号;而改进恒星时滤波法能适应测站周围多路径环境的变化,从而最大限度地削减多路径误差。两者组合比传统的恒星时滤波更能有效提高GPS的动态定位精度。 相似文献
7.
本文主要从GPS的基本观测方程出发,通过数学分析的方法,在GPS观测值之间建立数学模型,进一步推导了伪距观测值和相位观测值中多路径效应的影响.此外,主要研究了利用相位平滑伪距削弱伪距多路径误差的方法,以及利用小波分析的方法对GPS多路径值序列进行分解和重构,提取出高精度的多路径误差,并通过实验数据分析了几种方法中的多路径效应. 相似文献
8.
基于小波的GPS基线解算精化处理技术及其应用 总被引：7，自引：0，他引：7
采用小波技术对GPS信号进行处理,提出基于小波变换的周跳与粗差的探测.利用基于小波变换的小波滤波法对于提高GPS双差相位观测值的信噪比具有较好的效果,对其相位观测值进行小波滤波,消除或削弱多路径效应和各种观测噪声,使其观测值得以净化.这种方法对于缩小模糊度搜索空间及提高模糊度解的有效性有明显的作用,从而提高基线解算的精度. 相似文献
9.
在GPS高精度定位应用中,由于多路径效应系统误差影响,将会很大程度上影响Kalman滤波估计值的精度和可靠性,但是在实际应用中相邻2个观测向量的多路径系统误差大小比较接近,那么相邻观测向量之差即观测向量增量中所含的系统误差较小,其能够满足Kalman滤波观测噪声为白噪声的假设条件。文中基于增量Kalman滤波方法对于GPS多路径效应系统误差进行研究,并以具体实例例证该方法所具有的可行性和有效性。 相似文献
10.
利用信噪比削弱多路径误差的方法研究 总被引：4，自引：1，他引：3
多路径效应是卫星导航定位中重要的误差源,在分析多路径效应的产生原理以及多路径效应与信噪比相关性的基础上,提出了可利用信噪比削弱多路径效应的方法,并利用自测的GPS观测数据进行了验证. 相似文献
11.
Adaptive wavelet transform based on cross-validation method and its application to GPS multipath mitigation 总被引：3，自引：2，他引：1
Global positioning system (GPS) multipath disturbance is a bottleneck problem that limits the accuracy of precise GPS positioning
applications. A method based on the technique of cross-validation for automatically identifying wavelet signal layers is developed
and used for separating noise from signals in data series, and applied to mitigate GPS multipath effects. Experiments with
both simulated data series and real GPS observations show that the method is a powerful signal decomposer, which can successfully
separate noise from signals as long as the noise level is lower than about half of the magnitude of the signals. A multipath
correction model is derived based on the proposed method and the sidereal day-to-day repeating property of GPS multipath signals
to remove multipath effects on GPS observations and to improve the quality of the GPS measurements. 相似文献
12.
Multipath disturbance is one of the most important error sources in high-accuracy global positioning system (GPS) positioning and navigation. A new data filtering method, based on the Vondrak filter and the technique of cross-validation, is developed for separating signals from noise in data series, and applied to mitigate GPS multipath effects in applications such as deformation monitoring. Both simulated data series and real GPS observations are used to test the proposed method. It is shown that the method can be used to successfully separate signals from noise at different noise levels, and for varying signal frequencies as long as the noise level is lower than the magnitude of the signals. A multipath model can be derived, based on the current-day GPS observations, with the proposed method and used to remove multipath errors in subsequent days of GPS observations when taking advantage of the sidereal day-to-day repeating characteristics of GPS multipath signals. Tests have shown that the reduction in the root mean square (RMS) values of the GPS errors ranges from 20% to 40% when the method is applied. 相似文献
13.
随机误差和多径效应作为GPS变形监测中的主要误差源,严重影响着GPS测量精度。针对这一问题,本文将主成分分析(Principal Component Analysis,PCA)模型引入GPS变形监测领域,首先利用传统PCA方法将测量数据转换至特征空间,通过剔除小特征值对应的特征向量实现对高斯分布随机噪声的抑制,然后将多径噪声作为色噪声进行分析,提出一种广义PCA方法利用多径噪声的时间相关性对其进行滤除,基于实际工程测试数据的实验结果表明,相对于传统的小波噪声抑制方法,所提方法可以获得更好的噪声抑制性能。 相似文献
14.
GPS残差信号提取的时间序列分析方法 总被引：1，自引：0，他引：1
作者使用零基线单差模型研究并讨论了GPS量测噪声的时相关特性,并得出了GPS观测噪声具有类似白噪声或一阶高斯马尔科夫噪声的特殊性质。利用观测噪声所具备的这种特殊性质,作者首先尝试了从时间域的角度分离和提取了残差序列中的多路径信号特性,成功验证了多路径信号在连续两个恒星日内会有所重复的结论。作者提出了一种使用时相关分析法检测观测序列中周期信号(如冰期反弹、固体潮、极潮等)的设想并就其可行性进行了分析研究。最后,针对观测噪声的这种特殊性质,探讨了结合使用小波分析法提取GPS沉降监测信号的可行性。 相似文献
15.
An effective method of decreasing multipath errors in GPS or GPS/GLONASS receivers by changing delay lock loop correlator
reference signal is discussed. Unlike other approaches, this method does not lead to apparatus complication, power comsumption
increase, or augmentation of digital processor load. This method eliminates the multipath error completely if the difference
in delays of direct and reflected signal is more than 30 m, and decreases this error for smaller delays. The cost of such
decrease is that the noise error is decreased. However, the noise error is much less dangerous than the multipath one because
of its smaller value and much shorter correlation interval. Calculated and experimental data for the method are given for
multipath and noise errors. ? 1998 John Wiley & Sons, Inc. 相似文献
16.
17.
Wavelet packets based denoising method for measurement domain repeat-time multipath filtering in GPS static high-precision positioning 总被引：1，自引：1，他引：0
Lawrence Lau 《GPS Solutions》2017,21(2):461-474
Repeatable satellite orbits can be used for multipath mitigation in GPS-based deformation monitoring and other high-precision GPS applications that involve continuous observation with static antennas. Multipath signals at a static station repeat when the GPS constellation repeats given the same site environment. Repeat-time multipath filtering techniques need noise reduction methods to remove the white noise in carrier phase measurement residuals in order to retrieve the carrier phase multipath corrections for the next day. We propose a generic and robust three-level wavelet packets based denoising method for repeat-time-based carrier phase multipath filtering in relative positioning; the method does not need tuning to work with different data sets. The proposed denoising method is tested rigorously and compared with two other denoising methods. Three rooftop data sets collected at the University of Nottingham Ningbo China and two data sets collected at three Southern California Integrated GPS Network high-rate stations are used in the performance assessment. Test results of the wavelet packets denoising method are compared with the results of the resistor–capacitor (RC) low-pass filter and the single-level discrete wavelet transform (DWT) denoising method. Multipath mitigation efficiency in carrier phase measurement domain is shown by spectrum analysis of two selected satellites in two data sets. The positioning performance of the repeat-time-based multipath filtering techniques is assessed. The results show that the performance of the three noise reduction techniques is about 1–46 % improvement on positioning accuracy when compared with no multipath filtering. The statistical results show that the wavelet packets based denoising method is always better than the RC filter by 2–4 %, and better than the DWT method by 6–15 %. These results suggest that the proposed wavelet packets based denoising method is better than both the DWT method and the relatively simple RC low-pass filter for noise reduction in multipath filtering. However, the wavelet packets based denoising method is not significantly better than the RC filter. 相似文献
18.
19.
Though state-of-the-art dual-frequency receivers are employed in the continuous Global Positioning System (CGPS) arrays, the
CGPS coordinate time series are typically very noisy due to the effects of atmospheric biases, multipath, receiver noise,
and so on, with multipath generally being considered the major noise contributor. An adaptive finite-duration impulse response
filter, based on a least-mean-square algorithm, has been developed to derive a relatively noise-free time series from the
CGPS results. Furthermore, this algorithm is suitable for real-time applications.
Numerical simulation studies indicate that the adaptive filters is a powerful signal decomposer, which can significantly mitigate
multipath effects. By applying the filter to both pseudorange and carrier phase multipath sequences derived from some experimental
GPS data, multipath models have been reliably derived. It is found that the best multipath mitigation strategy is forward
filtering using data on two adjacent days, which reduces the standard deviations of the pseudorange multipath time series
to about one fourth its magnitude before correction and to about half in the case of carrier phase. The filter has been successfully
applied to the pseudorange multipath sequences derived from CGPS data. The benefit of this techniques is that the affected
observable sequences can be corrected, and then these corrected observables can be used to improve the quality of the GPS
coordinate results. ? 2000 John Wiley & Sons, Inc. 相似文献