首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 55 毫秒
1.
针对单一数据源难以快速、准确提取水体信息的问题,提出一种利用面向对象技术有效融合LiDAR点云与影像数据,准确提取水体信息的新方法。采用分形网络演化算法对航空影像进行多尺度分割得到影像对象,提出对象平均回波强度概念,利用LiDAR回波强度信息计算OAI,选取对象面积和OAI构建特征空间提取水体。实验结果表明,该方法简单高效,水体提取效果良好。该文方法可为无需精确配准的高精度水体提取、利用面向对象技术处理基于LiDAR数据和航空影像的信息提取等问题提供参考。  相似文献   

2.
城市道路的多特征多核SVM提取方法   总被引:1,自引:0,他引:1  
针对高分辨率遥感影像中城市道路提取的复杂性及SVM的分类性能,提出了一种城市道路的多特征多核SVM提取方法。首先利用FCM算法将原始影像粗分为建成区和非建成区两类,剔除非建成区;然后根据分水岭分割算法分割建成区并提取分割对象的光谱特征与空间特征,以全局核函数和局部核函数加权组合的方式构建多核SVM对建成区进行二次分类,去除建成区中的建筑物等非道路信息;最后利用数学形态学处理,获得最终的道路提取结果。试验结果表明:文中所提方法能够较精确地提取城市道路信息,分类精度高于单核SVM提取及其他对比方法。  相似文献   

3.
针对单纯利用三维激光点云信息不足的问题,提出融合多源数据对三维激光扫描仪获取的点云数据进行特征拟合的方法。根据地面点云及对应的扫描仪参数生成反射值影像;以反射值影像分割结果作为种子面,基于随机抽样一致性方法分割与拟合一体化;融合彩色影像提取的直线信息确定和验证拟合特征的边界。采用RIEGL VZ-400获取的建筑物点云数据进行了特征拟合试验,证明了该方法的有效性。  相似文献   

4.
针对直接从LiDAR点云数据中提取道路信息比较困难的问题,文章提出了一种基于点云分割和区域生长的机载LiDAR数据道路点云提取方法:采用曲面生长法对点云进行分割,直接得到包含道路信息的曲面点集合;应用LiDAR数据的回波强度对分割结果中的道路进行强度标定,并采用区域增长的思想实现了道路的精细提取。实验表明,该方法能够高效、准确地提取道路点云,在路桥建模方面有较强的使用价值。  相似文献   

5.
曹云刚  王志盼  慎利  肖雪  杨磊 《测绘学报》2016,45(10):1231-1240
提出了一种融合像元-多尺度对象级特征的高分辨率遥感影像道路中心线提取方法。首先在像素级上提取影像的纹理和形状结构特征,在构建的多尺度分割集影像上提取对象的区域光谱特征。然后,将像元级特征与多尺度对象特征进行决策级融合,完成道路网的粗提取。最后,结合本文所提出的非道路区域自动去除算法和张量投票算法,实现道路中心线的精提取。不同场景、不同分辨率数据下开展的试验结果表明,该方法可有效改善传统道路提取方法易产生的"盐噪声"和非道路地物粘连现象。  相似文献   

6.
近年来,随着空间信息获取技术的发展,激光扫描技术在城市三维数据采集中应用越来越广泛,本文以车载激光扫描点云数据为研究对象,利用点云数据空间分布特征和反射强度信息,结合道路标线的几何特征,提出一种快速有效地从离散点云中提取道路标识线的方法。该方法首先利用车载激光点云数据中的高程信息和反射强度信息对原始点云进行滤波。然后将分割后的点云数据投影到二维平面中,利用反射强度信息和点云空间分布信息生成点云强度特征图像,利用标线规则的几何形状,对连通区域进行道路标识线的提取。最后,基于道路标识线的语义信息,利用Hough变换对检测到的标识线进行分类和连接,从而提取完整、准确的三维道路标识线点云数据。通过居民区和高速公路扫描数据处理案例,实现了高速公路虚实标识线和干扰因素较多的居民区界线的自动提取,验证了上述道路标识线提取方法的可靠性,应用效果较好。  相似文献   

7.
城区的道路自动提取受场景复杂度的影响一直是极具挑战的任务,尤其是阴影和遮挡较严重地区的道路提取难度较大。结合LiDAR数据和高分辨率遥感影像,提出一种自动道路提取方法。该方法首先对滤波后的点云强度信息获取初始道路中线及道路关键点;将地面点云强度,离散度及高分辨率遥感影像光谱数据多重信息融合建立道路模型,并以优化后的道路关键点作为种子点利用动态规划计算模型最优解,进一步提取道路网。试验表明,该方法在城市复杂场景下的自动提取主要道路是有效的。  相似文献   

8.
提出一种先分割后聚类的道路提取方法,通过模糊积分的方法对多种尺度的道路提取结果进行融合研究。首先对影像进行多尺度超像素分割生成连续的不规则对象;再顾及光谱、形状和纹理特征进行SVM分类提取道路;最后对多种道路提取结果进行处理。实验结果表明该方法能够较为完整、准确地提取出高分辨率影像上的道路信息,可为城市高分影像道路快速提取提供一定的参考。  相似文献   

9.
综合利用LiDAR点云数据与WorldView-2高空间分辨率遥感影像,采用面向对象分类的矿区地表覆盖信息提取方法,利用nDSM高度阈值区分候选分割对象,构建了基于决策树分类器的矿区典型地物提取模型,在此基础上将图像光谱信息、DSM数据和地形参数等多源数据进行了融合,提取了出矸石堆、煤堆等典型煤矿区地物要素及植被、道路、水体等地表覆被要素信息。  相似文献   

10.
针对车载激光扫描系统获得的点云数据量大,难以获得有效特征进行分割分类提取道路的现状,提出一种深度学习图像语义分割辅助的激光点云道路提取方法。采用二维图像语义分割、数据融合配准粗分类、三维霍夫变换点云平面分割拟合和局部优化点云细分类的四步工作流程对车载激光点云进行道路提取。在2段不同的城市道路点云数据中进行提取与评测,获取的道路数据正确率与完整率均达到99%以上,提取质量优异,可满足实际应用需求。经实验分析,该方法可有效提取不同道路情况的道路点云,对点云数据的原始条件约束较少,相比其他方法在普适性和鲁棒性上都有大幅的提升。  相似文献   

11.
The hard-rock hilly Aravalli terrain of Rajasthan province of India suffers with frequent drought due to poor and delayed monsoon, abnormally high summer-temperature and insufficient water resources. In the present study, detailed analysis of meteorological and hydrological data of the Aravalli region has been carried out for the years 1984–2003. Standardised Precipitation Index (SPI) has been used to quantify the precipitation deficit. Standardised Water-Level Index (SWI) has been developed to assess ground-water recharge-deficit. Vegetative drought indices like Vegetation Condition Index (VCI) and Temperature Condition Index (TCI) and Vegetation Health Index (VHI) have been computed using NDVI values obtained from Global Vegetation Index (GVI) and thermal channel data of NOAA AVHRR satellite. Detailed analyses of spatial and temporal drought dynamics during monsoon and non-monsoon seasons have been carried out through drought index maps generated in Geographic Information Systems (GIS) environment. Analysis and interpretation of these maps reveal that negative SPI anomalies not always correspond to drought. In the Aravalli region, aquifer-stress shifts its position time to time, and in certain pockets it is more frequent. In comparison to hydrological stress, vegetative stress in the Aravalli region is found to be slower to begin but quicker to withdraw.  相似文献   

12.
韩双旺 《测绘科学》2010,35(2):193-196
SVG是一种基于XML的用来描述二维矢量图形和矢量/栅格混合图形的标记语言,虽然SVG不是为了面向地理空间数据发布而制定的标准,但它的许多特性都能被广泛地应用到WebGIS中,从而实现矢量WebGIS。由于SVG通过简单的文本语句描述矢量图像,所以SVG通常数据量很小,并且SVG支持GZIP压缩,所以基于SVG构建WebGIS能减轻网络传输负载,加快地图显示速度。SVG内置了对JavaScript的支持,且SVG可通过DOM解析映像成内存中的树型结构,所以客户层可通过JavaScript对DOM的操作实现对地图的缩放、漫游、查询、图层控制等交互操作。  相似文献   

13.
邓晖  陈家 《四川测绘》1997,20(4):169-171
本文在讨论DDE技术的基础上,对MapInfo的DDE机制的实现作了探讨和分析。根据技园区域GIS的实际开发工作,介绍了利用DDE技术在MapInfo中成功地集成Foxpro和Autocad.  相似文献   

14.
遥感技术在土地利用动态监测中的应用   总被引:8,自引:0,他引:8  
主要论述遥感技术在土地监测中的应用,以某地区土地利用动态遥感监测研究项目的运作过程为例进行阐述。首先介绍了土地利用动态监测的具体内容和技术路线。其次,对数据预处理与信息采集的方法与手段进行了探讨。最后,对作业的内、外业主要过程以及应提交的成果作了介绍。  相似文献   

15.
地理数据库的关系模型及其实现   总被引:1,自引:0,他引:1  
本文从以图论观点分析地理实体入手,系统阐述了地理数据库关系模型的设计法和过程。作者于1984年4~9月间在微型机上设计建立了关系型地理数据库的实方验系统(RGDB)。该系统采用了本文提出的关系模型,采用了可动态扩库的子库组合结构,这种结构具有灵活性和提高空间利用率的优点。RGDB含有多种功能的数据操作命令,除了具有一般检索功能外,还能进行“开窗”选取和十分“自由”的映象选取。本文对RGDB系统的主要性能和实现途径作了扼要介绍。  相似文献   

16.
Web Service与地理信息互操作   总被引:37,自引:9,他引:28  
结合当今主流IT将互联网带入Web Service的趋势,以GIS工作者的视角剖析、审视这一发展趋势对GIS互操作的重要意义。文章在介绍Web Service的设计理念及相关技术的基础上,分析了传统空间地理信息互操作技术的局限性,概括总结了Web Service在空间地理信息的共享、互操作和集成上的良好支持和适应性,指出Web Service是未来实现GIS互操作的最佳解决方案。  相似文献   

17.
Automatic 3D extraction of building roofs from remotely sensed data is important for many applications including city modelling. This paper proposes a new method for automatic 3D roof extraction through an effective integration of LIDAR (Light Detection And Ranging) data and multispectral orthoimagery. Using the ground height from a DEM (Digital Elevation Model), the raw LIDAR points are separated into two groups. The first group contains the ground points that are exploited to constitute a ‘ground mask’. The second group contains the non-ground points which are segmented using an innovative image line guided segmentation technique to extract the roof planes. The image lines are extracted from the grey-scale version of the orthoimage and then classified into several classes such as ‘ground’, ‘tree’, ‘roof edge’ and ‘roof ridge’ using the ground mask and colour and texture information from the orthoimagery. During segmentation of the non-ground LIDAR points, the lines from the latter two classes are used as baselines to locate the nearby LIDAR points of the neighbouring planes. For each plane a robust seed region is thereby defined using the nearby non-ground LIDAR points of a baseline and this region is iteratively grown to extract the complete roof plane. Finally, a newly proposed rule-based procedure is applied to remove planes constructed on trees. Experimental results show that the proposed method can successfully remove vegetation and so offers high extraction rates.  相似文献   

18.
In recent years, land use/cover dynamic change has become a key subject that needs to be dealt with in the study of global environmental change. In this paper, remote sensing and geographic information systems (GIS) are integrated to monitor, map, and quantify the land use/cover change in the southern part of Iraq (Basrah Province was taken as a case) by using a 1:250 000 mapping scale. Remote sensing and GIS software were used to classify Landsat TM in 1990 and Landsat ETM+ in 2003 imagery into five land use and land cover (LULC) classes: vegetation, sand, urban area, unused land, and water bodies. Supervised classification and normalized difference build-up index (NDBI) were used respectively to retrieve its urban boundary. An accuracy assessment was performed on the 2003 LULC map to determine the reliability of the map. Finally, GIS software was used to quantify and illustrate the various LULC conversions that took place over the 13-year span of time. Results showed that the urban area had increased by the rate of 1.2% per year, with area expansion from 3 299.1 km2 in 1990 to 3 794.9 km2 in 2003. Large vegetation area in the north and southeast were converted into urban construction land. The land use/cover changes of Basrah Province were mainly caused by rapid development of the urban economy and population immigration from the countryside. In addition, the former government policy of “returning farmland to transportation and huge expansion in military camps” was the major driving force for vegetation land change. The paper concludes that remote sensing and GIS can be used to create LULC maps. It also notes that the maps generated can be used to delineate the changes that take place over time. Supported by the Al-Basrah University, Iraq, the Geo-information Science and Technology Program (No. IRT 0438)China).  相似文献   

19.
朱骏侠 《测绘通报》2021,(4):146-150
随着城市面貌日新月异,地下管网的建设也在持续推进,作为城市的地下“神经网络”,全天24 h保障城市的正常运转和发展。本文以实现城市管网管理系统的高可用、无插件、智能化为目标,采用“地上地下一体”“二三维一体”的设计理念,研究基于WebGL的三维智慧管网系统的关键技术,实现了管线设施管理的信息数字化、空间化与图形化。  相似文献   

20.
We aim a better understanding of the effect of spring-time snow melt on the remotely sensed scene reflectance by using an extensive amount of optical spectral data obtained from an airborne hyperspectral campaign in Northern Finland. We investigate the behaviour of thin snow reflectance for different land cover types, such as open areas, boreal forests and treeless fells. Our results not only confirm the generally known fact that the reflectance of a melting thin snow layer is considerably lower than that of a thick snow layer, but we also present analyses of the reflectance variation over different land covers and in boreal forests as a function of canopy coverage. According to common knowledge, the highly variating reflectance spectra of partially transparent, most likely also contaminated thin snow pack weakens the performance of snow detection algorithms, in particular in the mapping of Fractional Snow Cover (FSC) during the end of the melting period. The obtained results directly support further development of the SCAmod algorithm for FSC retrieval, and can be likewise applied to develop other algorithms for optical satellite data (e.g. spectral unmixing methods), and to perform accuracy assessments for snow detection algorithms.A useful part of this work is the investigation of the competence of Normalized Difference Snow Index (NDSI) in snow detection in late spring, since it is widely used in snow mapping. We conclude, based on the spectral data analysis, that the NDSI -based snow mapping is more accurate in open areas than in forests. However, at the very end of the snow melting period the behavior of the NDSI becomes more unstable and unpredictable in non-forests with shallow snow, increasing the inaccuracy also in non-forested areas. For instance in peatbogs covered by melting snow layer (snow depth < 30 cm) the mean NDSI -0.6 was observed, having coefficient of variation as high as 70%, whereas for deeper snow packs the mean NDSI shows positive values.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号