首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 34 毫秒
1.
Crater morphology and size play a major role in determining whether wind-blown streaks emanating from craters or dark splotches within craters will form. Both bright and dark streaks emanate almost exclusively from bowl-shaped craters. Dark splotches are found mainly in flat-floored craters, especially those that are deep and have high rim relief. Trends of dark splotches in the northern to southern midlatitudes closely follow those of bright streaks, suggesting both were formed by similar winds. In the high southern latitudes, on the other hand, dark splotch trends closely follow those of dark streaks.Qualitative models of streak and splotch formation have been derived from these data and results of Sagan et al. (1972, 1973). Bright streaks probably form by trapping and simultaneous streaming of bright dust downwind. Dark splotched craters in regions with bright streaks usually have upwind bright patches, suggesting these features form by dumping of bright dust over crater rims with some minor redistribution of dark materials toward the downwind sides of craters. Data are consistent with dark streaks forming by erosion or nondeposition of bright material or by trapping of dark material. Dark splotches in these regions are probably mainly the result of trapping of dark sand in the downwind sides of crater floors. Craters with dark splotches and dark streaks are usually rimless and shallow. This is consistent with ponded dark sands easily washing over crater walls and extending downwind.Plots of streak length versus crater diameter suggest a complex history of streak formation for most regions.Bright streak trends and latitudinal distributions are consistent with return flow of dust to the southern hemisphere. Some dark streaks may be direct relics of passing sand and dust storms. Trends of dark streaks and splotches away from the south pole are consistent with the spreading of a debris mantle from the polar regions toward the equator.  相似文献   

2.
Abstract— The late Eocene Chesapeake Bay impact structure (CBIS) on the Atlantic margin of Virginia is one of the largest and best‐preserved “wet‐target” craters on Earth. It provides an accessible analog for studying impact processes in layered and wet targets on volatile‐rich planets. The CBIS formed in a layered target of water, weak clastic sediments, and hard crystalline rock. The buried structure consists of a deep, filled central crater, 38 km in width, surrounded by a shallower brim known as the annular trough. The annular trough formed partly by collapse of weak sediments, which expanded the structure to ?85 km in diameter. Such extensive collapse, in addition to excavation processes, can explain the “inverted sombrero” morphology observed at some craters in layered targets. The distribution of crater‐fill materials in the CBIS is related to the morphology. Suevitic breccia, including pre‐resurge fallback deposits, is found in the central crater. Impact‐modified sediments, formed by fluidization and collapse of water‐saturated sand and silt‐clay, occur in the annular trough. Allogenic sediment‐clast breccia, interpreted as ocean‐resurge deposits, overlies the other impactites and covers the entire crater beneath a blanket of postimpact sediments. The formation of chaotic terrains on Mars is attributed to collapse due to the release of volatiles from thick layered deposits. Some flat‐floored rimless depressions with chaotic infill in these terrains are impact craters that expanded by collapse farther than expected for similar‐sized complex craters in solid targets. Studies of crater materials in the CBIS provide insights into processes of crater expansion on Mars and their links to volatiles.  相似文献   

3.
Floor-fractured lunar craters   总被引：1，自引：0，他引：1  
Numerous lunar craters (206 examples, mean diameter = 40km) contain pronounced floor rilles (fractures) and evidence for volcanic processes. Seven morphologic classes have been defined according to floor depth and the appearance of the floor, wall, and rim zones. Such craters containing central peaks exhibit peak heights (approximately 1km) comparable to those within well-preserved impact craters but exhibit smaller rim-peak elevation differences (generally 0–1.5km) than those (2.4km) within impact craters. In addition, the morphology, spatial distribution, and floor elevation data reveal a probable genetic association with the maria and suggest that a large number of floor-fractured craters represent pre-mare impact craters whose floors have been lifted tectonically and modified volcanically during the epochs of mare flooding. Floor uplift is envisioned as floating on an intruded sill, and estimates of the buoyed floor thickness are consistent with the inferred depth of brecciation beneath impact craters, a zone interpreted as a trap for the intruding magma. The derived model of crater modification accounts for (1) the large differences in affected crater size and age; (2) the small peak-rim elevation differences; (3) remnant central peaks within mare-flooded craters and ringed plains; (4) ridged and flat-topped rim profiles of heavily modified craters and ringed plains; and (5) the absence of positive gravity anomalies in most floor-fractured craters and some large mare-filled craters. One of the seven morphologic classes, however, displays a significantly smaller mean size, larger distances from the maria, and distinctive morphology relative to the other six classes. The distinctive morphology is attributed, in part, to the relatively small size of the affected crater, but certain members of this class represent a style of volcanism unrelated to the maria - perhaps triggered by the last major basin-forming impacts.  相似文献   

4.
Reta F. Beebe 《Icarus》1980,44(1):1-19
The simple-to-complex transition for impact craters on Mars occurs at diameters between about 3 and 8 km. Ballistically emplaced ejecta surround primarily those craters that have a simple interior morphology, whereas ejecta displaying features attributable to fluid flow are mostly restricted to complex craters. Size-dependent characteristics of 73 relatively fresh Martian craters, emphasizing the new depth/diameter (d/D) data of D. W. G. Arthur (1980, to be submitted for publication), test two hypotheses for the mode of formation of central peaks in complex craters. In particular, five features appear sequentially with increasing crater size: first flat floors (3–4 km), then central peaks and shallower depths (4–5 km), next scalloped rims (? km), and lastly terraced walls (～8 km). This relative order indicates that a shallow depth of excavation and an unspecified rebound mechanism, not centripetal collapse and deep sliding, have produced central peaks and in turn have facilitated failure of the rim. The mechanism of formation of a shallow crater remains elusive, but probably operates only at the excavation stage of impact. This interpretation is consistent with two separate and complementary lines of evidence. First, field data have documented only shallow subsurface deformation and a shallow transient cavity in complex terrestrial meteorite craters and in certain surface-burst explosion craters; thus the shallow transient cavities of complex craters never were geometrically similar to the deep cavities of simple craters. Second, the average depths of complex craters and the diameters marking the transition from simple to complex craters on Mars and on three other terrestrial planets vary inversely with gravitational acceleration at the planetary surface, g, a variable more important in the excavation of a crater than in any subsequent modification of its geometry. The new interpretation is summarized diagrammatically for complex craters on all planets.  相似文献   

5.
Abstract– Previous workers have proposed that a northern ocean existed early during Martian geologic history and the shorelines of that ocean would coincide roughly with the crustal dichotomy that divides the smooth, northern lowlands with the cratered, southern highlands. Arabia Terra is a region on Mars that straddles the crustal dichotomy, and several proposed shorelines are located in the area. Shallow marine impact craters on Mars likely would exhibit features like those on Earth, including characteristic morphological features that are distinctly different from that of craters formed on land. Common attributes of terrestrial marine impact craters include features of wet mass movement such as gravity slumps and debris flows; radial gullies leading into the crater depression; resurge deposits and blocks of dislocated materials; crater rim collapse or breaching of the crater wall; a central peak terrace or peak ring terrace; and subdued topography (an indicator of both age and possible flood inundation immediately following impact). In this article, these features have been used to evaluate craters on Mars as to a possible marine origin. This study used a simple quantification system to approximately judge and rank shallow marine impact crater candidates based on features observed in terrestrial analogs. Based on the quantification system, 77 potential shallow marine impact craters were found within an area bounded by 20°N and 40°N as well as 20°W and 20°E. Nine exemplary candidates were ranked with total scores of 70% or more. In a second, smaller study area, impact craters of approximately similar size and age were evaluated as a comparison and average total scores are 35%, indicating that there is some morphological difference between craters inside and outside the proposed shorelines. Results of this type of study are useful in helping to develop a general means of classification and characterization of potential marine craters.  相似文献   

6.
Making use of Orbiter and Apollo photographs, frequency counts of craters down to 2 km diam as indicators of the relative ages of lunar features, have been made on 264 areas, including 15 terrae, 27 recognized maria, 174 flat-floored craters and 48 lava-covered areas with indefinite boundaries designated as ‘marets’. Analysis of frequency counts on flat-floored craters on the basis of this data and re-assessment of former results, combined with the relatively restricted age range of lunar samples, make it unlikely that the present observations are able to reach back in time to impacts on an assumed primordial floating crust. The range of crater frequencies on the marets, together with their wide distribution over the lunar surface, suggest lava migrations to the surface within autonomous domains each with its own chronology, covering an extensive period of lunar history. The close association of marets with flat-floored craters provides a reasonable origin for the floor material of these latter objects. The lava migrations associated with the marets suggest that internal heating may be a more important factor in the origin of lunar surface features than had formerly been supposed. Kopal's views on the origin of the moon's multiple moments of intertia (1972) are considered to support the concept of autonomous domains. It is considered that the time sequence of separate lava flows represented by the marets may be a reflection of physical processes within the moon responsible for the successive lava flows associated with the larger maria.  相似文献   

7.
Lunar irregular mare patches (IMPs) comprise dozens of small, distinctive, and enigmatic lunar mare features. Characterized by their irregular shapes, well-preserved state of relief, apparent optical immaturity, and few superposed impact craters, IMPs are interpreted to have been formed or modified geologically very recently (<~100 Ma; Braden et al. 2014 ). However, their apparent relatively recent formation/modification dates and emplacement mechanisms are debated. We focus in detail on one of the major IMPs, Sosigenes, located in western Mare Tranquillitatis, and dated by Braden et al. ( 2014 ) at ~18 Ma. The Sosigenes IMP occurs on the floor of an elongate pit crater interpreted to represent the surface manifestation of magmatic dike propagation from the lunar mantle during the mare basalt emplacement era billions of years ago. The floor of the pit crater is characterized by three morphologic units typical of several other IMPs, i.e., (1) bulbous mounds 5–10 m higher than the adjacent floor units, with unusually young crater retention ages, meters thick regolith, and slightly smaller subresolution roughness than typical mature lunar regolith; (2) a lower hummocky unit mantled by a very thin regolith and significantly smaller subresolution roughness; and (3) a lower blocky unit composed of fresh boulder fields with individual meter-scale boulders and rough subresolution surface texture. Using new volcanological interpretations for the ascent and eruption of magma in dikes, and dike degassing and extrusion behavior in the final stages of dike closure, we interpret the three units to be related to the late-stage behavior of an ancient dike emplacement event. Following the initial dike emplacement and collapse of the pit crater, the floor of the pit crater was flooded by the latest-stage magma. The low rise rate of the magma in the terminal stages of the dike emplacement event favored flooding of the pit crater floor to form a lava lake, and CO gas bubble coalescence initiated a strombolian phase disrupting the cooling lava lake surface. This phase produced a very rough and highly porous (with both vesicularity and macroporosity) lava lake surface as the lake surface cooled. In the terminal stage of the eruption, dike closure with no addition of magma from depth caused the last magma reaching shallow levels to produce viscous magmatic foam due to H2O gas exsolution. This magmatic foam was extruded through cracks in the lava lake crust to produce the bulbous mounds. We interpret all of these activities to have taken place in the terminal stages of the dike emplacement event billions of years ago. We attribute the unusual physical properties of the mounds and floor units (anomalously young ages, unusual morphology, relative immaturity, and blockiness) to be due to the unusual physical properties of the substrate produced during the waning stages of a dike emplacement event in a pit crater. The unique physical properties of the mounds (magmatic foams) and hummocky units (small vesicles and large void space) altered the nature of subsequent impact cratering, regolith development, and landscape evolution, inhibiting the typical formation and evolution of superposed impact craters, and maintaining the morphologic crispness and optical immaturity. Accounting for the effects of the reduced diameter of craters formed in magmatic foams results in a shift of the crater size–frequency distribution age from <100 Myr to billions of years, contemporaneous with the surrounding ancient mare basalts. We conclude that extremely young mare basalt eruptions, and resulting modification of lunar thermal evolution models to account for the apparent young ages of the IMPs, are not required. We suggest that other IMP occurrences, both those associated with pit craters atop dikes and those linked to fissure eruptions in the lunar maria, may have had similar ancient origins.  相似文献   

8.
A study of lunar impact crater size-distributions   总被引：3，自引：0，他引：3  
Discrepancies in published crater frequency data prompted this study of lunar crater distributions. Effects modifying production size distributions of impact craters such as surface lava flows, blanketing by ejecta, superposition, infilling, and abrasion of craters, mass wasting, and the contribution of secondary and volcanic craters are discussed. The resulting criteria have been applied in the determination of the size distributions of unmodified impact crater populations in selected lunar regions of different ages. The measured cumulative crater frequencies are used to obtain a general calibration size distribution curve by a normalization procedure. It is found that the lunar impact crater size distribution is largely constant in the size range 0.3 km ?D ? 20 km for regions with formation ages between ≈ 3 × 109 yr and ? 4 × 109 yr. A polynomial of 4th degree, valid in the size range 0.8 km ?D ? 20 km, and a polynomial of 7th degree, valid in the size range 0.3 km ?D ? ? 20 km, have been approximated to the logarithm of the cumulative crater frequencyN as a function of the logarithm of crater diameterD. The resulting relationship can be expressed asN ～D α(D) where α is a function depending onD. This relationship allows the comparison of crater frequencies in different size ranges. Exponential relationships with constant α, commonly used in the literature, are shown to inadequately approximate the lunar impact crater size distribution. Deviations of measured size distributions from the calibration distribution are strongly suggestive of the existence of processes having modified the primary impact crater population.  相似文献   

9.
Abstract— The Ilumetsa impact craters were discovered in 1938 in the course of geological mapping. In the crater field area, the Middle Devonian bedrock consists of light‐yellow weakly cemented siltstones and sandstones of the Givetian Burtnieki Regional Stage, which are overlain by a 1–2 m thick layer of reddish‐brown loamy till. Põrguhaud, the biggest crater, has a diameter of 75–80 m at the top of the uplifted rim and is 12.5 m deep. The zone of authochtonous breccias below the apparent crater extends to 30 m deep. The crater is partly filled with a thin layer of gyttja and peat up to 2 m thick. Radiocarbon ages of 6030 ± 100 (TA‐310) and 5910 ± 100 (TA‐725) years B.P. from the lowermost organic layer and palynological evidence suggest that the age of the impact was ～6000 14C years B.P. The Sügavhaud crater has a diameter of 50 m at the top of the rim and is 4.5 m deep. Organic matter on the bottom of the crater is absent. As precise age determination of the Ilumetsa craters by direct dating methods has proved inconclusive, we proposed a method of geological correlation which is based on the occurrence of impact spherules in lake and bog sediments around the crater field. Radiocarbon dating of samples from a peat layer with glassy spherules of impact origin in the Meenikunno Bog, 6 km southwest of the Ilumetsa crater field, yielded the ages of 6542 ± 50 (Tln‐2214) for the depth interval 5.6–5.7 m and 6697 ± 50 (Tln‐2316) years B.P. for the depth interval 5.7–5.8 m. These dates suggest that the Ilumetsa craters were formed ～6600 years ago.  相似文献   

10.
We determined the morphologies and dimensions of possible impact craters on the surface of Asteroid 25143 Itokawa from images taken by the Hayabusa spacecraft. Circular depressions, circular features with flat floors or convex floors, and circular features with smooth surfaces were identified as possible craters. The survey identified 38 candidates with widely varying morphologies including rough, smooth and saddle-shaped floors, a lack of raised rims and fresh material exposures. The average depth/diameter ratio was 0.08±0.03: these craters are very shallow relative to craters observed on other asteroids. These shallow craters are a result of (1) target curvature influencing the cratering process, (2) raised rim not being generated by this process, and (3) fines infilling the craters. As many of the crater candidates have an unusual appearance, we used a classification scheme that reflects the likelihood of an observed candidate's formation by a hypervelocity impact. We considered a variety of alternative interpretations while developing this scheme, including inherited features from a proto-Itokawa, spall scars created by the disruption of the proto-Itokawa, spall scars following the formation of a large crater on Itokawa itself, and apparent depressions due to random arrangements of boulders. The size-frequency distribution of the crater candidates was close to the empirical saturation line at the largest diameter, and then decline with decreasing diameter.  相似文献   

11.
Because of the ubiquity of subsurface microbial life on Earth, examination of the subsurface of Mars could provide an answer to the question of whether microorganisms exist or ever existed on that planet. Impact craters provide a natural mechanism for accessing the deep substrate of Mars and exploring its exobiological potential. Based on equations that relate impact crater diameters to excavation depth we estimate the observed crater diameters that are required to prospect to given depths in the martian subsurface and we relate these depths to observed microbiological phenomena in the terrestrial subsurface. Simple craters can be used to examine material to a depth of ∼270 m. Complex craters can be used to reach greater depths, with craters of diameters ≥300 km required to reach depths of 6 km or greater, which represent the limit of the terrestrial deep subsurface biosphere. Examination of the ejecta blankets of craters between 17.5 and 260 km in diameter would provide insights into whether there is an extant, or whether there is evidence of an extinct, deep subsurface microbiota between 500 and 5000 m prior to committing to large-scale drilling efforts. At depths <500 m some crater excavations are likely to be more important than others from an exobiological point of view. We discuss examples of impacts into putative intracrater paleolacustrine sediments and regions associated with hydrothermal activity. We compare these depths to the characteristics of subsurface life on Earth and the fossil microbiological record in terrestrial impact craters.  相似文献   

12.
The existence of large terrestrial impact crater doublets and Martian crater doublets that have been inferred to be impact craters demonstrates that simultaneous impact of two or more bodies occurs at nearly the same point on planetary surfaces. An experimental study of simultaneous impact of two projectiles near one another shows that doublet craters with ridges perpendicular to the bilateral axis of symmetry result when separation between impact points relative to individual crater diameter is large. When separation is progressively less, elliptical craters with central ridges and central peaks, circular craters with flat floors containing ridges and peaks, and circular craters with deep round bottoms are produced. These craters are similar in structure to many of the large lunar craters. Results suggest that the simultaneous impact of meteoroids near one another may be an important mechanism for the production of central peaks in large lunar craters.  相似文献   

13.
Most impacts occur at an angle with respect to the horizontal plane. This is primarily reflected in the ejecta distribution, but at very low angle structural asymmetries such as elongation of the crater and nonradial development of the central peak become apparent. Unfortunately, impact craters with pristine ejecta layers are rare on Earth and also in areas with strong past or ongoing surface erosion on other planetary bodies, and the structural analysis of central peaks requires good exposures or even on‐site access to outcrop. However, target properties are known to greatly influence the shape of the crater, especially the relatively common target configuration of a weaker layer covering a more rigid basement. One such effect is the formation of concentric craters, i.e., a nested, deeper, inner crater surrounded by a shallow, outer crater. Here, we show that with decreasing impact angle there is a downrange shift of the outer crater with respect to the nested crater. We use a combination of (1) field observation and published 3‐D numerical simulation of one of the best examples of a terrestrial, concentric impact crater formed in a layered target with preserved ejecta layer: the Lockne crater, Sweden; (2) remote sensing data for three pristine, concentric impact craters on Mars with preserved ejecta layers further constraining the direction of impact; as well as (3) laboratory impact experiments, to develop the offset in crater concentricity into a complementary method to determine the direction of impact for layered‐target craters with poorly preserved ejecta layers.  相似文献   

14.
Five certain impact craters and 44 additional nearly certain and probable ones have been identified on the 22% of Titan’s surface imaged by Cassini’s high-resolution radar through December 2007. The certain craters have morphologies similar to impact craters on rocky planets, as well as two with radar bright, jagged rims. The less certain craters often appear to be eroded versions of the certain ones. Titan’s craters are modified by a variety of processes including fluvial erosion, mass wasting, burial by dunes and submergence in seas, but there is no compelling evidence of isostatic adjustments as on other icy moons, nor draping by thick atmospheric deposits. The paucity of craters implies that Titan’s surface is quite young, but the modeled age depends on which published crater production rate is assumed. Using the model of Artemieva and Lunine (2005) suggests that craters with diameters smaller than about 35 km are younger than 200 million years old, and larger craters are older. Craters are not distributed uniformly; Xanadu has a crater density 2-9 times greater than the rest of Titan, and the density on equatorial dune areas is much lower than average. There is a small excess of craters on the leading hemisphere, and craters are deficient in the north polar region compared to the rest of the world. The youthful age of Titan overall, and the various erosional states of its likely impact craters, demonstrate that dynamic processes have destroyed most of the early history of the moon, and that multiple processes continue to strongly modify its surface. The existence of 24 possible impact craters with diameters less than 20 km appears consistent with the Ivanov, Basilevsky and Neukum (1997) model of the effectiveness of Titan’s atmosphere in destroying most but not all small projectiles.  相似文献   

15.
Abstract The pattern of radial and concentric offset dikes at Sudbury strongly resembles fracture patterns in certain volcanically modified craters on the Moon. Since the Sudbury dikes apparently formed shortly after the impact event, this resemblance suggests that early endogenic modification at Sudbury was comparable to deformation in lunar floor-fractured craters. Although regional deformation has obscured many details of the Sudbury Structure, such a comparison of Sudbury with lunar floor-fractured craters provides two alternative models for the original size and surface structures of the Sudbury basin. First, the Sudbury date pattern can be correlated with fractures in the central peak crater Haldane (36 km in diameter). This comparison indicates an initial Sudbury diameter of between 100 and 140 km but requires loss of a central peak complex for which there is little evidence. Alternatively, comparison of the Sudbury dikes with fractures in the two-ring basin Schrödinger indicates an initial Sudbury diameter of at least ～ 180 km, which is in agreement with other recent estimates for the size of the Sudbury Structure. In addition to constraining the size and structure of the original Sudbury crater, these comparisons also suggest that crater modification may reflect different deformation mechanisms at different sizes. Most lunar floor-fractured craters are attributed to deformation over a shallow, crater-centered intrusion; however, there is no evidence for such an intrusion at Sudbury. Instead, melts from the evolving impact melt sheet probably entered fractures formed by isostatically-induced flexure of the crater floor. Since most of the lunar floor-fractured craters are too small (<100-km diameter) to induce significant isostatic adjustment, crater modification by isostatic uplift apparently is limited to only the largest of craters, whereas deformation over igneous intrusions dominates the modification of smaller craters.  相似文献   

16.
Mariner 9 photographs of the southern hemisphere of Mars taken during the 1971 planet-wide dust storm display circular bright spots at a time when all near-surface features were totally obscured. Correlating the positions and diameters of these spots with topography shows that they correspond to craters. About half of all the large craters in thestudy area were brightened. The associated craters are large and flat-floored, have significant rim uplift, and contain dark splotches on their floors. The depth/diameter relationship of the bright spot craters is comparable to that of a planet-wide sample. Depth may not be important in selectively brightening certain craters. The visibility of bright spots in A-camera photographs is strongly dependent on the wavelength of the filter used during exposure. It is proposed that bright spots result from the multiple scattering of incident light in dust clouds entrained within craters during dust storms. The appearance of the dust clouds is a function of the availability of a dust supply and, perhaps, air turbulence generated by winds flowing over upraised rims and rough crater floors. Bright spots persist during the final stage of the planet-wide dust storm. If bright spots are dust clouds, this persistence demonstrates that crater interiors are the last regions of clearing.  相似文献   

17.
Using high-resolution Galileo images, we counted the number of craters (larger than 1 km) on two of Jupiter's satellites—Callisto (outside and inside the Asgard impact basin) and Ganymede (in the dark cratered Galileo region)—and classified these craters morphologically. Based on the degree of preservation of crater rims, three morphological classes, A, B, and C (from the most preserved to the most degraded), have been identified. The A : B : C ratios, equal, respectively, to 1 : 3 : 5, 1 : 3 : 7, and 1 : 2.5 : 6.5 for fragments of the territory outside and inside the Asgard basin and within Galileo Regio, indicate that these crater populations reached a considerably high degree of maturity. The degradation of kilometer-scale craters on Callisto proceeds by the narrowing of their rims and their disintegration into chains of knobs, probably due to the sublimation of ice that composes the rim material. Comparing the density of craters of different classes in the regions inside and outside Asgard shows that class A craters on the territories examined were formed after the event that formed this impact basin. Kilometer-scale craters on Ganymede degrade through the expansion and smoothing of their rims and the dissection of them by radial furrows. This implies the involvement in the crater destruction of a downslope movement triggered by the seismic activity that accompanied the formation of tectonic grooves. It is possible that ice sublimation also took part in the destruction of craters on Ganymede, but its effect was less prominent than the effect of downslope movements.  相似文献   

18.
The first part of the paper describes the relationship between the erosional stage of craters and the crater areal density. It is shown that class-2 and -3 craters are progressively more abundant as the crater areal density increases, while craters of class 4 and 5 are more abundant with decreasing crater areal densities. A geological model is proposed, in which the class of a newly foormed crater is 1. As time progresses, erosional agents will increase the class of the crater to class 2, then 3, and, in some cases, to 4. The length of time between classification steps is not known in terms of years, but is equivalent to the time necessary for the crater density to increase by 2 to 8 craters per unit area for creaters larger than 10 km, and by 10 to 20 for craters larger than 3.5 km. Craters of class 5 and some of class 4 are not formed by the same erosional agents, but are catastrophic, caused either by a mare-producing impact or by flooding of mare material.The second part of the paper presents a method for relatively dating large lunar areas. The method uses the model previously developed. A relative time sequence is constructed using the density of craters of classes 1, 2, and 3 and the percentage of these which is of class 1. As an example, 18 large areas are defined on the lunar near side and are put in temporal order. Mare Serenitatis appears to have the youngest terrain, and an area southwest of the Rupes Altai appears to have the oldest.In the final part of the paper a geological model is developed in order to explain age differences in the terrae. The model calls for rejuvenation of lunar terrains, caused by the seismic waves and ballistic sedimentation resulting from large impacts. The area surrounding Mare Orientale is cited as an example of a terrain so affected. A similar effect on the terrae of the near side could explain the apparent age relationships measured.  相似文献   

19.
The review and new measurements are presented for depth/diameter ratio and slope angle evolution during small (D < 1 km) lunar impact craters aging (degradation). Comparative analysis of available data on the areal cratering density and on the crater degradation state for selected craters, dated with returned Apollo samples, in the first approximation confirms Neukum’s chronological model. The uncertainty of crater retention age due to crater degradational widening is estimated. The collected and analyzed data are discussed to be used in the future updating of mechanical models for lunar crater aging.  相似文献   

20.
E.M. Parmentier  J.W. Head 《Icarus》1981,47(1):100-111
Spacecraft images show that the icy Galilean satellites have surfaces with very low topographic relief. Impact craters on Ganymede and Callisto are anomalously shallow and are characterized by sharp well-defined rims and domed floors. These morphological characteristics can be explained by viscous relaxation of topography on an icy crust in which the viscosity is uniform or decreases with depth. Under these conditions, large craters relax more rapidly than small craters, therefore explaining a possible underabundance of large craters. Viscous relaxation on an icy crust that is thin compared to the crater diameter or on a thick icy crust in which viscosity increases with depth could not produce this crater morphology and would result in the more rapid relaxation of small craters rather than large craters. The results of this study suggest that more detailed analysis of relaxing impact crater morphology may resolve the rate of viscosity decrease with depth and so provide evidence on the interior thermal evolution of icy planetary bodies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号