黑洞吸积盘的演化及温度分布的热不稳定性     

汪定雄  杨兰田  陆烨 《中国天文和天体物理学报》1994,(4)

本文在Ｔｈｏｒｎｅ工作的基础上讨论了吸积盘中黑洞的有关参量的演化，以及由Ｓｃｈｗａｒｚｓｃｈｉｌｄ黑洞吸积盘向Ｋｅｒｒ黑洞吸积盘演化过程中对吸积盘辐射通量的影响，最后针对几个典型的辐射过程，分别讨论了黑洞吸积盘在牛顿框架中的温度分布方程与广义相对论的温度分布方程的热不稳定性，并给出此类问题的热不稳定性的判据。  相似文献   

Formation Pressure Evaluation Method for Single Well     

WANG Yachun 《东北亚地学研究》2002,(1)

The paper deals with the methods of formation pressure evaluation for a single well by using the very common ac-cepted parameters, such as drilling exponent , and flowline temperature , etc. which is part of compiling the end well report.  相似文献   

山东省侵入岩岩石单位及其代号的厘定   总被引：1，自引：0，他引：1       下载免费PDF全文

王世进  张成基  宋明春  王沛成 《山东国土资源》2002,18(1):9-20

根据《1∶2 5万区域地质调查技术要求 (暂行 )》和我省正在进行的 1∶2 5万区调修测取得的阶段性成果 ,对山东省侵入岩岩石单位及其代号进行了厘定 :不同类型的花岗岩类均作为正式填图单位按“年代 岩性和典型产地方法”确定填图单位代号 ,而独立侵入体、脉岩和包体 ,以及基性—超基性岩则作为非正式填图单位按“年代 岩性方法”确定填图单位代号。  相似文献   

水下滑翔器主体外形优化设计   总被引：2，自引：0，他引：2  

王兵振  朱光文  杜敏  任炜  李永奇 《海洋技术学报》2008,27(3)

对水下滑翔器主体外形的优化设计问题进行研究.首先,在考虑内部机械结构限制的条件下,建立了主体外形优化数学模型,并采用CFX计算了若干主体形状的绕流阻力.在此基础上建立了映射主体外形的尺寸参数与绕流阻力的BP神经网络.然后将建立的神经网络作为优化设计问题的目标函数,采用坐标轮换法对滑翔器主体外形进行了优化设计,确定了尺寸参数的最优解.  相似文献   

Molecular phylogenetic analysis of attached Ulvaceae species and free-floating Enteromorpha from Qingdao coasts in 2007   总被引：3，自引：1，他引：2  

姜鹏  王金锋  崔玉琳  李友训  林瀚智  秦松 《中国海洋湖沼学报》2008,26(3)

Based on the sequence data of the nuclear ribosomal DNA internal transcribed spacer(ITS) 1,5.8 S,and ITS 2,the molecular phylogeny was analyzed on Ulvaceae species collected from Qingdao coasts in summer of 2007,including 15 attached Ulva and Enteromorpha samples from 10 locations and 10 free-floating Enteromorpha samples from seven locations.The result supported the monophyly of all free-floating Enteromorpha samples,implying the unialgal composition of the free-floating Enteromorpha,and the attached Ulvaceae species from Qingdao coasts were grouped into other five clades,suggesting that they were not the biogeographic origin of the free-floating Enteromorpha in that season.  相似文献   

三角帆蚌鳃的组织学研究     

骆大鹏  余祥勇  王梅芳  王佃涛 《广东海洋大学学报》2008,28(3)

对非繁殖期与繁殖前期的雌性三角帆蚌鳃瓣作组织切片,观察其组织形态结构。结果表明,三角帆蚌内、外鳃的鳃丝在组成上是相同的,从外到内,其结构可以分为:上皮、基膜、结缔组织,鳃丝上密布纤毛,鳃丝结缔组织中含吞噬细胞、透明细胞等。外鳃具特有结构——瓣间隔和育儿囊,且在瓣间隔两侧,有发达的小水管系统。由于这种结构的存在,使得内外鳃瓣在鳃瓣厚度、鳃小瓣厚度、鳃丝宽度上存在显著性差异。繁殖前期,内鳃基本无变化,而外鳃发生明显的变化,鳃瓣增厚,鳃腔扩大形成孵化室,为胚胎发育提供一个良好的发育环境。  相似文献   

用PCI中断实现射电望远镜跟踪的方法     

王锦清  范庆元 《天文学进展》2006,24(2):160-166

讨论运用PCI 9054(美国PLX公司生产的接口芯片)作为接口芯片的PCI(Peripheral Component Interconnect)板卡的软硬件设计,以实现天线跟踪的两个时间同步中断。利用标准秒信号中断作为系统时钟同步信号,并同步产生时间间隔为20ms(或40、50ms,可选)的中断信号,来处理天线跟踪指令输出。中断信号通过PCI中断口INTA#接入计算机,在驱动中识别不同的中断信号,并在应用程序响应中断处理后,命令ACU(Antenna Control Unit)机,实现射电天文望远镜的同步跟踪。其控制过程分3部分阐述:硬件设计、驱动程序设计、安装及应用;着重讨论了前两者的设计方法及思路。  相似文献   

PKI中RA的功能模型及一种实现方式     

张元茂  刘玓 《成都信息工程学院学报》2005,20(1):12-15

网络安全是近年来研究的热点，各种新技术不断涌现，身份认证是安全应用中最重要的一个问题，也是PKI的核心服务之一。PKI作为信息安全的基石经过几年的发展不断走向成熟，在许多领域发挥着重要的作用。针对目前对PKI中的重要部件RA的研究很少的状况，着重对RA的实现模型进行了探讨。  相似文献   

Growth, interaction and seismogenic potential of coupled active normal faults (Isernia Basin, central-southern Italy)     

Daniela Di Bucci  Giuseppe Naso  Sveva Corrado  Igor M. Villa 《地学学报》2005,17(1):44-55

The inception and growth of the active Carpino-Le Piane Basin Fault System (CLPBFS; central-southern Apennines, Italy) was analysed with respect to the neighbouring Isernia and Surrounding (ISFS) and Boiano Basin (BBFS) extensional Fault Systems. ³⁹Ar–⁴⁰Ar dating showed that the BBFS was already active 649 ± 21 ka bp and that the ISFS was active at least 476 ±10 ka bp , whereas the activity of the CLPBFS started certainly later than 253 ± 22 ka bp , and very probably as recently as <28 ka bp . These ages, combined with structural data (geometry and kinematics of the fault systems), indicate that the inception and development of the CLPBFS could be strictly related to the stress changes caused by earthquakes occurring on the BBFS.  相似文献   

Design of a high update-rate star sensor for arcsec-level attitude determination from balloon-borne X/γ astronomy platforms     

G. Palladino  A. Basili  G. Di Cocco  T. Franceschini  G. Landini  S. Silvestri  A. Barbini  M. Galimberti  L. A. Gizzi 《Experimental Astronomy》2006,21(3):169-187

This paper describes the design of a star sensor based upon a high dynamic range CCD in order to reach an arcsec-level attitude determination in balloon-borne missions. A custom star identification software was developed and laboratory-tested on a prototype assembled using commercial components. A set of numerical simulations have been carried out to study the dependence on the pointing precision of the centroid position accuracy, the number of detected stars and the effect of the image focusing. Moreover, the role of the electronic noise and the discrete pixel structure on the light signals is identified by the analysis of numerical simulations. Laboratory tests confirm that the arcsec pointing accuracy with a 1 Hz update rate can be achieved with our combination of custom-developed software and selected hardware components.  相似文献