Elasticity of antigorite,seismic detection of serpentinites,and anisotropy in subduction zones     

Lucile Bezacier  Bruno Reynard  Jay D. Bass  Carmen Sanchez-Valle  Bertrand Van de Moortèle 《Earth and Planetary Science Letters》2010,289(1-2):198-208

Serpentinization of the mantle wedge is an important process that influences the seismic and mechanical properties in subduction zones. Seismic detection of serpentines relies on the knowledge of elastic properties of serpentinites, which thus far has not been possible in the absence of single-crystal elastic properties of antigorite. The elastic constants of antigorite, the dominant serpentine at high-pressure in subduction zones, were measured using Brillouin spectroscopy under ambient conditions. In addition, antigorite lattice preferred orientations (LPO) were determined using an electron back-scattering diffraction (EBSD) technique. Isotropic aggregate velocities are significantly lower than those of peridotites to allow seismic detection of serpentinites from tomography. The isotropic V_P/V_S ratio is 1.76 in the Voigt–Reuss–Hill average, not very different from that of 1.73 in peridotite, but may vary between 1.70 and 1.86 between the Voigt and Reuss bonds. Antigorite and deformed serpentinites have a very high seismic anisotropy and remarkably low velocities along particular directions. V_P varies between 8.9 km s^? 1 and 5.6 km s^? 1 (46% anisotropy), and 8.3 km s^? 1 and 5.8 km s^? 1 (37%), and V_S between 5.1 km s^? 1 and 2.5 km s^? 1 (66%), and 4.7 km s^? 1 and 2.9 km s^? 1 (50%) for the single-crystal and aggregate, respectively. The V_P/V_S ratio and shear wave splitting also vary with orientation between 1.2 and 3.4, and 1.3 and 2.8 for the single-crystal and aggregate, respectively. Thus deformed serpentinites can present seismic velocities similar to peridotites for wave propagation parallel to the foliation or lower than crustal rocks for wave propagation perpendicular to the foliation. These properties can be used to detect serpentinite, quantify the amount of serpentinization, and to discuss relationships between seismic anisotropy and deformation in the mantle wedge. Regions of high V_P/V_S ratios and extremely low velocities in the mantle wedge of subduction zones (down to about 6 and 3 km.s^?1 for V_P and V_S, respectively) are difficult to explain without strong preferred orientation of serpentine. Local variations of anisotropy may result from kilometer-scale folding of serpentinites. Shear wave splittings up to 1–1.5 s can be explained with moderately thick (10–20 km) serpentinite bodies.  相似文献   

High Purge Volume Sampling—A New Paradigm for Subslab Soil Gas Monitoring     

Todd A. McAlary  Paul J. Nicholson  Lee K. Yik  David M. Bertrand  Gordon Thrupp 《Ground Water Monitoring & Remediation》2010,30(2):73-85

Subslab soil gas sampling and analysis is a common line of evidence for assessing human health risks associated with subsurface vapor intrusion to indoor air for volatile organic compounds; however, conventional subslab sampling methods have generated data that show substantial spatial and temporal variability, which often makes the interpretation difficult. A new method of monitoring has been developed and tested that is based on a concept of integrating samples over a large volume of soil gas extracted from beneath the floor slab of a building to provide a spatially averaged subslab concentration. Regular field screening is also conducted to assess the trend of concentration as a function of the volume removed to provide insight into the spatial distribution of vapors at progressive distances away from the point of extraction. This approach minimizes the risk of failing to identify the areas of elevated soil vapor concentrations that may exist between discrete sample locations, and can provide information covering large buildings with fewer holes drilled through the floor. The new method also involves monitoring the extraction flow rate and transient vacuum response for mathematical analysis to help interpret the vapor concentration data and to support an optimal design for any subslab venting system that may be needed.  相似文献   

Morphology,structure and kinematics of a rainfall controlled slow‐moving Andean landslide,Peru          下载免费PDF全文

Swann Zerathe  Pascal Lacroix  Denis Jongmans  Jersy Marino  Edu Taipe  Marc Wathelet  Walter Pari  Lionel Fidel Smoll  Edmundo Norabuena  Bertrand Guillier  Lucile Tatard 《地球表面变化过程与地形》2016,41(11):1477-1493

The large slow‐moving landslide of Maca is located in the upper Colca valley (southern Peru), a region characterized by a well pronounced rainy period, and intense and recurrent sustained seismicity. The landslide, developed in deep lacustrine deposits, has recently accelerated, threatening the Maca village. This work aims at understanding the rupture mechanism and the causes of the recent landslide reactivation/acceleration. We present a multidisciplinary characterization of the Maca landslide that includes: (i) geological and morphological mapping in the field; (ii) remote sensing analysis using an historical aerial photograph of 1955 and the Pléiades satellite images (2013); (iii) global positioning system (GPS) including time‐series of surveys over 13 years, and continuous measurements over 14 months; (iv) a geophysical campaign with deep electrical resistivity tomography profiles acquired across the landslide mass. Our study shows that this 60 Mm³ landslide, which can be classified as a clay/silt compound landslide, moved by 15 m between 2001 and 2014 with a large inter‐annual velocity variation (up to a factor of 500) depending on the rainfall intensity. We suggest that these dramatic changes in velocity are the result of the combination of a threshold mechanism and the short intense rainy season in Peru. This study reveals three main driving factors acting at different timescales: (i) over several decades, the river course has significantly changed, causing the Maca landslide reactivation in the 1980s due to the erosion of its toe; (ii) at the year scale, a minimum amount of rainfall is required to trigger the motion and this amount controls the landslide velocity; (iii) transient changes in slide velocity may occur anytime due to earthquakes. This study particularly highlights the non‐linear behaviour of the motion with rainfall. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Building frequency fluctuations from continuous monitoring of ambient vibrations and their relationship to temperature variations     

Bertrand?GuillierEmail author  Jean-Luc?Chatelain  Hugo?Perfettini  El?Hadi?Oubaiche  Christophe?Voisin  Rabah?Bensalem  Djamel?Machane  Mustapha?Hellel 《Bulletin of Earthquake Engineering》2016,14(8):2213-2227

Building frequencies (fundamental and higher modes) are a critical parameter especially in the field of structural health monitoring mainly based on the stability of the structural dynamic parameters of individual building (frequencies, damping and modes shape). One of the most used methods to find out these parameters is based on the use on ambient vibration analysis. In this work, we study the fluctuations over a month period of the fundamental frequencies (transverse and longitudinal) of a 3.5-story RC-building made of 2 identical units connected by a structural joint. Time independent building frequencies is a strong assumption; as illustrated by our experiment showing that over an observation period of a month, building frequencies fluctuate of about 3.5 %. A clear correlation is found between the building frequency fluctuations and temperature variations, with a phase-shift interpreted as the characteristic time of heat diffusion within the walls. This allows: (1) determining the thermal diffusivity of the structure, (2) inferring its relative stiffness variations, and (3) showing that its Young modulus varies linearly with temperature.  相似文献   

Removal of Nitroaniline From Water/Ethanol by Electrocoagulation Using Response Surface Methodology          下载免费PDF全文

Guy Bertrand Tamne  Charles Peguy Nanseu‐Njiki  Ede Bodoki  Robert Săndulescu  Radu Oprean  Emmanuel Ngameni 《洁净——土壤、空气、水》2016,44(4):430-437

  相似文献   

Evolution of anthropogenic and biomass burning emissions of air pollutants at global and regional scales during the 1980�C2010 period     

Claire Granier  Bertrand Bessagnet  Tami Bond  Ariela D��Angiola  Hugo Denier van der Gon  Gregory J. Frost  Angelika Heil  Johannes W. Kaiser  Stefan Kinne  Zbigniew Klimont  Silvia Kloster  Jean-Fran?ois Lamarque  Catherine Liousse  Toshihiko Masui  Frederik Meleux  Aude Mieville  Toshimasa Ohara  Jean-Christophe Raut  Keywan Riahi  Martin G. Schultz  Steven J. Smith  Allison Thompson  John van Aardenne  Guido R. van der Werf  Detlef P. van Vuuren 《Climatic change》2011,109(1-2):163-190

Several different inventories of global and regional anthropogenic and biomass burning emissions are assessed for the 1980?C2010 period. The species considered in this study are carbon monoxide, nitrogen oxides, sulfur dioxide and black carbon. The inventories considered include the ACCMIP historical emissions developed in support of the simulations for the IPCC AR5 assessment. Emissions for 2005 and 2010 from the Representative Concentration Pathways (RCPs) are also included. Large discrepancies between the global and regional emissions are identified, which shows that there is still no consensus on the best estimates for surface emissions of atmospheric compounds. At the global scale, anthropogenic emissions of CO, NO_x and SO₂ show the best agreement for most years, although agreement does not necessarily mean that uncertainty is low. The agreement is low for BC emissions, particularly in the period prior to 2000. The best consensus is for NO_x emissions for all periods and all regions, except for China, where emissions in 1980 and 1990 need to be better defined. Emissions of CO need better quantification in the USA and India for all periods; in Central Europe, the evolution of emissions during the past two decades needs to be better determined. The agreement between the different SO₂ emissions datasets is rather good for the USA, but better quantification is needed elsewhere, particularly for Central Europe, India and China. The comparisons performed in this study show that the use of RCP8.5 for the extension of the ACCMIP inventory beyond 2000 is reasonable, until more global or regional estimates become available. Concerning biomass burning emissions, most inventories agree within 50?C80%, depending on the year and season. The large differences between biomass burning inventories are due to differences in the estimates of burned areas from the different available products, as well as in the amount of biomass burned.  相似文献   

Site effects of the Roio basin, L��Aquila     

E. Bertrand  A.-M. Duval  J. R��gnier  R. M. Azzara  F. Bergamashi  P. Bordoni  F. Cara  G. Cultrera  G. Di Giulio  G. Milana  J. Salichon 《Bulletin of Earthquake Engineering》2011,9(3):809-823

During the microzonation studies of the April 6th, 2009 L??Aquila earthquake, we observed local seismic amplifications in the Roio area??a plane separated from L??Aquila city center by mount Luco. Six portable, digital instruments were deployed across the plain from 15 April to mid-May 2009. This array recorded 152 aftershocks. We analyzed the ground motion from these events to determine relative site amplification within the plain and on surrounding ridges. Horizontal over vertical spectral ratio on noise data (HVSRN), aftershock recordings (HVEQ) and standard spectral ratio (SSR) showed amplifications at 1.3 and 4.0?Hz on quaternary deposits. Seismic amplifications in the frequency range of 4 and 6?Hz were also observed on a carbonate ridge of Colle di Roio, on the northwestern border of the plateau. A small amplification was noticed near the top of mount Luco, another rocky site. Large discrepancies in the amplification levels between methods have been observed for these sites, but the HVSRN, HVEQ and SSR gave similar results at the stations located in the Roio plain. On the rocky sites, the SSR was more reliable than the HVSRN at estimating the transfer function of the site, even if the resonance frequency seemed to be well detected by the latter method.  相似文献   

Formation of U-depleted rhyolite from a basanite at El Hierro, Canary Islands   总被引：2，自引：0，他引：2  

Olgeir Sigmarsson  Didier Laporte  Marion Carpentier  Bertrand Devouard  Jean-Luc Devidal  Joan Marti 《Contributions to Mineralogy and Petrology》2013,165(3):601-622

Phonolite and trachyte are the felsic magmas of the alkaline magma suites, which characterize the Canary Islands. The October 2011 submarine eruption off El Hierro, the westernmost island, nevertheless, produced a small volume of rhyolitic magma. The rhyolite occurred as highly vesicular, white coloured pumices enveloped in and mingled with darker coloured basanitic pumice. The basanitic pumice is relatively crystal poor with a few euhedral olivines (mostly Fo_77–79), clinopyroxenes and Fe-rich spinels, whereas very rare olivine of same composition is found together with equally rare Fe-sulphide and FeTi-rich oxides in the rhyolite. The Fe–Mg exchange equilibrium in the oxides permits to calculate an equilibrium temperature of 970–890 °C for the rhyolite, in agreement with quartz-melt equilibrium at ca. 930 °C. A striking mineralogical feature of the rhyolite is the presence of rounded to contorted grains of milky quartz, which are xenocrysts incorporated and partly dissolved into the magma. Analyses of residual volatile concentrations in the glasses show that the rhyolite melt was highly degassed, whereas the basanitic glass still has important halogen concentrations. Trace element patterns of the mafic glasses and their elevated incompatible element concentrations are typical of the western Canary Island basanites. In contrast, the trace element composition of the rhyolite shows surprisingly low concentrations for all elements except the most incompatible ones (e.g. Rb, Ba, K and Th). All other measured LILE, HFSE and REE have significantly lower concentration than the basanitic counterpart that can be explained by fractionation of accessory phases (1 % apatite, 1 % sphene and 0.1 % zircon). Surprisingly, low U concentration is presumably related to elevated oxygen fugacity in the rhyolite, causing U to be in a hexavalent state, and fluxing of F-rich gas leading to volatilization of UF₆, known to emanate at low temperature. The results suggest that a gas-rich basanitic melt remobilized a small volume of stagnant rhyolitic melt formed by incorporation of approximately 10 % quartz-rich sediment into a late differentiate of trachytic composition. Sediments at the interface of an old oceanic crust adjacent to a continental shield and younger volcanic island are likely to act as magma traps were sediment assimilation may alter the mantle-derived magma composition. Quartz assimilation thus explains the production of rhyolite magma in a volcanic island characterized by an alkaline magma series from primitive basanites to trachytes.  相似文献   

Onboard GRB trigger algorithms of SVOM-GRM   总被引：1，自引：0，他引：1  

Dong-Hua Zhao  Bo-Bing Wu  Li-Ming Song  Yong-Wei Dong  Stephane Schanne  Bertrand Cordier  Jiang-Tao Liu 《天文和天体物理学研究(英文版)》2013,(11):1381-1396

The Gamma-Ray Monitor （GRM） is a high energy detector onboard the future Chinese-French satellite named the Space-based multi-band astronomical Variable Object Monitor which is dedicated to studies of gamma-ray bursts （GRBs）. This paper presents an investigation of the algorithms that look for GRBs by searching for a significant increase in the photon count rate for the computer onboard GRM. The trigger threshold and trigger efficiency, which are based on a given sample of GRBs, are calculated with the algorithms. The trigger characteristics of onboard instruments GRM and ECLAIRs are also analyzed. In addition, the impact of solar flares on GRM is estimated, and a method to distinguish solar flares from GRBs is investigated.  相似文献   

Influence of instruments on the H/V spectral ratios of ambient vibrations   总被引：3，自引：3，他引：0  

Bertrand Guillier  Kuvvet Atakan  Jean-Luc Chatelain  Jens Havskov  Matthias Ohrnberger  Fabrizio Cara  Anne-Marie Duval  Stratos Zacharopoulos  Paula Teves-Costa  The SESAME Team 《Bulletin of Earthquake Engineering》2008,6(1):3-31

For an optimal analysis of the H/V curve, it appears necessary to check the instrument signal to noise ratio in the studied frequency band, to ensure that the signal from the ground noise is well above the internal noise. We assess the reliability and accuracy of various digitizers, sensors and/or digitizer-sensor couples. Although this study is of general interest for any kind of seismological study, we emphasize the influence of equipment on H/V analysis results. To display the impact of the instrumental part on the H/V behavior, some series of tests have been carried out following a step-by-step procedure: first, the digitizers have been tested in the lab (sensitivity, internal noise...), then the three components sensors, still in the lab, and finally the usual user digitizers-sensors couple in lab and outdoors. In general, the digitizer characteristics, verified during this test, correspond well to the manufacturer specifications, however, depending on the digitizer, the quality of the digitized waveform can be very good to very poor, with variation from a channel to another channel (gain, time difference etc.). It appears very clearly that digitizers need a warming up time before the recording to avoid problems in the low-frequency range. Regarding the sensors, we recommend strongly to avoid the use of “classical” accelerometers (i.e., usual force balance technology). The majority of tested seismometers (broadband and short period, even 4.5 Hz) can be used without problems from 0.4 to 25 Hz. In all cases, the instrumentation should be checked first to verify that it works well for the defined study aim, but also to define its limit of use (frequency, sensitivity...).  相似文献