Assessment of a monumental masonry bell-tower after 2016 Central Italy seismic sequence by long-term SHM     

Filippo Ubertini  Nicola Cavalagli  Alban Kita  Gabriele Comanducci 《Bulletin of Earthquake Engineering》2018,16(2):775-801

The response of the San Pietro monumental bell-tower located in Perugia, Italy, to the 2016 Central Italy seismic sequence is investigated, taking advantage of the availability of field data recorded by a vibration-based SHM system installed in December 2014 to detect earthquake-induced damages. The tower is located about 85 km in the NW direction from the epicenter of the first major shock of the sequence, the Accumoli Mw6.0 earthquake of August 24th, resulting in a small local PGA of about 30 cm/s², whereby near-field PGA was measured as 915.97 cm/s² (E–W component) and 445.59 cm/s² (N–S component). Similar PGA values also characterized the two other major shocks of the sequence (Ussita Mw5.9 and Norcia Mw6.5 earthquakes of October 26th and 30th, respectively). Despite the relatively low intensity of such earthquakes in Perugia, the analysis of long-term monitoring data clearly highlights that small permanent changes in the structural behavior of the bell-tower have occurred after the earthquakes, with decreases in all identified natural frequencies. Such natural frequency decays are fully consistent with what predicted by non-linear finite element simulations and, in particular, with the development of microcracks at the base of the columns of the belfry. Microcracks in these regions, and in the rest of tower, are however hardly distinguishable from pre-existing ones and from the physiological cracking of a masonry structure, what validates the effectiveness of the SHM system in detecting earthquake-induced damage at a stage where this is not yet detectable by visual inspections.  相似文献   

Numerical homogenization-based seismic assessment of an English-bond masonry prototype: Structural level application     

Luís C. Silva  Paulo B. Lourenço  Gabriele Milani 《地震工程与结构动力学》2020,49(9):841-862

A multiscale strategy is evaluated at a structural level for the analysis of unreinforced masonry structures. The mechanical characterization of the masonry is deduced from homogenization-based micro-scale finite element (FE) models. The derived data are here employed at a structural level via a discrete FE model. The discrete FE model is composed of quadrilateral rigid plates interconnected through vertical and horizontal interfaces. On the interfaces, between adjoining discrete elements, a model that accounts for the in- and out-of-plane behavior of masonry, with damage and plasticity, is adopted. Such interfaces represent the material pre- and post-peak regimes, its orthotropy, and, depending on the micro-model assumed, account by three-dimensional shear effects that are especially important for multi-leaf walls and complex regular textures. The discrete model has been implemented in an advanced structural analysis software where powerful built-in features as the arc-length method, line-search algorithm, and implicit or explicit solver schemes are available. The multi-scale model is applied for the dynamic study of a small English-bond masonry house prototype subjected to a series of consecutive earthquake records. Detailed comparisons between the experimental and numerical data are presented, including the results obtained through a continuous total strain rotating crack model. Quasi-static and dynamic analyses are conducted. Results demonstrate that when enough experimental information is available on the masonry components under tension, shear, and compression regimes, the approach predicts well the seismic structural response in terms of time-history displacements, seismic capacity, and damage patterns. The required computational cost (CPU time) is very attractive.  相似文献   

Changes in monthly baseflow across the U.S. Midwest   总被引：1，自引：0，他引：1  

Jessica R. Ayers  Gabriele Villarini  Christopher Jones  Keith Schilling 《水文研究》2019,33(5):748-758

Characterizing streamflow changes in the agricultural U.S. Midwest is critical for effective planning and management of water resources throughout the region. The objective of this study is to determine if and how baseflow has responded to land alteration and climate changes across the study area during the 50‐year study period by exploring hydrologic variations based on long‐term stream gage data. This study evaluates monthly contributions to annual baseflow along with possible trends over the 1966–2016 period for 458 U.S. Geological Survey streamflow gages within 12 different Midwestern states. It also examines the influence of climate and land use factors on the observed baseflow trends. Monthly contribution breakdowns demonstrate how the majority of baseflow is discharged into streams during the spring months (March, April, and May) and is overall more substantial throughout the spring (especially in April) and summer (June, July, and August). Baseflow has not remained constant over the study period, and the results of the trend detection from the Mann–Kendall test reveal that baseflows have increased and are the strongest from May to September. This analysis is confirmed by quantile regression, which suggests that for most of the year, the largest changes are detected in the central part of the distribution. Although increasing baseflow trends are widespread throughout the region, decreasing trends are few and limited to Kansas and Nebraska. Further analysis reveals that baseflow changes are being driven by both climate and land use change across the region. Increasing trends in baseflow are linked to increases in precipitation throughout the year and are most prominent during May and June. Changes in agricultural intensity (in terms of harvested corn and soybean acreage) are linked to increasing trends in the central and western Midwest, whereas increasing temperatures may lead to decreasing baseflow trends in spring and summer in northern Wisconsin, Kansas, and Nebraska.  相似文献   

Reconstruction of a destructive debris‐flow event via numerical modeling: the role of valley geometry on flow dynamics          下载免费PDF全文

Luca Schilirò  Fabio V. De Blasio  Carlo Esposito  Gabriele Scarascia Mugnozza 《地球表面变化过程与地形》2015,40(14):1847-1861

  相似文献   

Roles of methane and carbon dioxide in geological processes on Mars     

Goro Komatsu  Gian Gabriele Ori  Marco Cardinale  James M. Dohm  Victor R. Baker  David A. Vaz  Ryo Ishimaru  Noriyuki Namiki  Takafumi Matsui 《Planetary and Space Science》2011,59(2-3):169-181

We discuss in this paper possible roles of methane and carbon dioxide in geological processes on Mars. These volatiles in the martian crust may migrate upward from their sources either directly or via various traps (structural, sedimentary, ground ice, gas hydrates). They are then likely emitted to the atmosphere by seepage or through diverse vent structures. Though gas hydrates have never been directly detected on Mars, theoretical studies favor their presence in the crust and polar caps; they could have played an important role as significant gas reservoirs in the subsurface. The martian gas hydrates would possibly be a binary system of methane and carbon dioxide occupying clathrate cavities. Landforms such as mud volcanoes with well-known linkage to gas venting are extensively distributed on Earth, and methane is the primary gas involved. Thus, identification of these landforms on Mars could suggest that methane and possibly carbon dioxide have contributed to geological processes of the planet. For example, we present a newly identified field in Chryse Planitia where features closely resembling terrestrial mud volcanoes occur widely, though with no observable activity. We also present results of a preliminary search for possible recent or present-day, methane-emission zones in the regions over which enrichments of atmospheric methane have been reported.  相似文献   

Nonlinear sediment thickness increase on the western East Pacific Rise flank, 45°S     

Michael Horn  Gabriele Uenzelmann-Neben 《Geo-Marine Letters》2013,33(5):381-390

Sediment thickness was evaluated on the western flank of the East Pacific Rise (EPR) at 45°S, based on high-resolution seismic data gathered during cruise 213/2 of R/V Sonne in 2011. Two zones with distinctly different sediment thickness were identified, separated by a transitional zone bordering a pseudo-fault. Sediment in the more distal zone 2 is almost twice as thick (~120 m) as in zone 1 close to the EPR. This is in contrast to the expected progressive sedimentary column thickening with seafloor age and distance from the spreading axis. The younger of two seismic units detected within the sedimentary column (EPR-2) occurs mainly in the distal zone on crust older than 9 Ma, whereas on younger crust it is present only in small isolated bodies. Both sedimentary units drape the basement. The drape is interpreted to represent particle settling from suspension and a generally low regional primary productivity. The spatial variation in sediment thickness cannot be explained by existing models, and other processes considered in the present case are (1) higher productivity in the western sector of the survey area, where thicker sediments were observed (zone 2), (2) the formation of sediment drifts near basement highs (‘seamount effect’), due to flow of Lower Circumpolar Deep Water affecting sediment deposition, and (3) erosion and/or non-deposition of the younger EPR-2 unit, due to elevated bed shear stresses associated with eddies transferring kinetic energy to the seafloor  相似文献   

Seagrass ecophysiology meets ecological genomics: are we ready?     

Gabriele Procaccini  Sven Beer  Mats Björk  Jeanine Olsen  Silvia Mazzuca  Rui Santos 《Marine Ecology》2012,33(4):522-527

In March 2011, the Ecophysiology and Genetics Working Groups of the European Science Foundation COST Action ES 0906, entitled Seagrass Productivity: From Genes to Ecosystem Management, organized an exploratory workshop entitled “Linking Ecophysiology and Ecogenomics in Seagrass Systems”. The goal of the workshop was to discuss how to integrate comparative gene expression studies with physiological processes such as photosynthetic performance, carbon and nitrogen utilization and environmental adaptation. The main questions discussed for integrative research related to mechanisms of carbon utilization, light requirements, temperature effects and natural variation in pH and ocean acidification. It was concluded that the seagrass research community is still in the nascent stages of linking ecophysiology with genomic responses, as carbon and nitrogen metabolism of seagrasses have not been sufficiently well studied. Likewise, genomic approaches have only been able to assign meaningful interpretations to a handful of differentially expressed genes. Nevertheless, the way forward has been established.  相似文献   

Investigating on the 1920 Garfagnana earthquake (M_w=6.5): Evidences of site effects in Villa Collemandina (Tuscany,Italy)     

Roberto De Ferrari  Gabriele Ferretti  Simone Barani  Daniele Spallarossa 《Soil Dynamics and Earthquake Engineering》2010

This paper presents a comprehensive ground response study for the municipality of Villa Collemandina in Northern Tuscany (Italy). This site was selected following a macroseismic analysis of the 1920 Garfagnana earthquake (M_w=6.5), which, at Villa Collemandina, produced damage and losses that were larger than at any other site near the earthquake epicentre, thus indicating the presence of possible site effects. Hence, both experimental and numerical methods are applied in order to investigate the ground response at different locations within the Villa Collemandina municipality. Results obtained from the spectral analysis of earthquake recordings using the reference site method and those from a 2-dimensional dynamic simulation reveal the presence of site effects due to the buried geomorphology (basin-like effects), allowing us to explain the severe damage and losses produced by the 1920 Garfagnana earthquake. As a further result, horizontal to vertical spectral ratio techniques and 1D soil modelling are proved to be inadequate for an effective characterization of the ground response at sites that, like Villa Collemandina, present a complex local geology.  相似文献   

Reliability of the automatic procedures for locating earthquakes in southwestern Alps and northern Apennines (Italy)     

Chiara Turino  Paola Morasca  Gabriele Ferretti  Davide Scafidi  Daniele Spallarossa 《Journal of Seismology》2010,14(2):393-411

Reliable automatic procedure for locating earthquake in quasi-real time is strongly needed for seismic warning system, earthquake preparedness, and producing shaking maps. The reliability of an automatic location algorithm is influenced by several factors such as errors in picking seismic phases, network geometry, and velocity model uncertainties. The main purpose of this work is to investigate the performances of different automatic procedures to choose the most suitable one to be applied for the quasi-real-time earthquake locations in northwestern Italy. The reliability of two automatic-picking algorithms (one based on the Characteristic Function (CF) analysis, CF picker, and the other one based on the Akaike’s information criterion (AIC), AIC picker) and two location methods (“Hypoellipse” and “NonLinLoc” codes) is analysed by comparing the automatically determined hypocentral coordinates with reference ones. Reference locations are computed by the “Hypoellipse” code considering manually revised data and tested using quarry blasts. The comparison is made on a dataset composed by 575 seismic events for the period 2000–2007 as recorded by the Regional Seismic network of Northwestern Italy. For P phases, similar results, in terms of both amount of detected picks and magnitude of travel time differences with respect to manual picks, are obtained applying the AIC and the CF picker; on the contrary, for S phases, the AIC picker seems to provide a significant greater number of readings than the CF picker. Furthermore, the “NonLinLoc” software (applied to a 3D velocity model) is proved to be more reliable than the “Hypoellipse” code (applied to layered 1D velocity models), leading to more reliable automatic locations also when outliers (wrong picks) are present.  相似文献   

ESEEM of industrial quartz powders: insights into crystal chemistry of Al defects     

Maurizio?Romanelli  Francesco?Di BenedettoEmail author  Laura?Bartali  Massimo?Innocenti  Gabriele?Fornaciai  Giordano?Montegrossi  Luca?A.?Pardi  Alfonso?Zoleo  Fabio?Capacci 《Physics and Chemistry of Minerals》2012,39(6):479-490

A set of raw industrial materials, that is, pure quartz and quartz-rich mixtures, were investigated through electron paramagnetic resonance and electron spin echo-envelope modulation spectroscopies, with the aim of evaluating the effective role played by defect centres and of assessing whether they can be used to monitor changes in the physical properties of quartz powders with reference to their health effects. The obtained results point to two interactions of the Al defect centres with H⁺, hosted in sites within the channels parallel and perpendicular to the c axis of quartz, respectively. These two Al/H⁺ (h_Al) centres exhibit a weak chemical bond, and their relative amounts appear to be modified/controlled by the thermo-mechanical processes underwent by powders. Indeed, a mechanically promoted inter-conversion between the two kinds of site is suggested. As a consequence, the h_Al centres are effective in monitoring even modest activations of powders, through thermal or mechanical processes, and they are also supposed to play a specific, relevant role in quartz reactivity during the considered industrial processes.  相似文献