Uncertainty analysis of urban sewer system using spatial simulation of radar rainfall fields: New York City case study     

Ali?HamidiEmail authorView author&#;s OrcID profile  David?J.?Farnham  Reza?Khanbilvardi 《Stochastic Environmental Research and Risk Assessment (SERRA)》2018,32(8):2293-2308

The goal of this study is to investigate the uncertainty of an urban sewer system’s response under various rainfall and infrastructure scenarios by applying a recently developed nonparametric copula-based simulation approach to extreme rainfall fields. The approach allows for Monte Carlo simulation of multiple variables with differing marginal distributions and arbitrary dependence structure. The independent and identically distributed daily extreme rainfall events of the corresponding urban area, extracted from nationwide high resolution radar data stage IV, are the inputs of the spatial simulator. The simulated extreme rainfall fields were used to calculate excess runoff using the Natural Resources Conservation Service’s approach. New York City is selected as a case study and the results highlight the importance of preserving the spatial dependence of rainfall fields between the grids, even for simplified hydrologic models. This study estimates the probability of combined sewer overflows under extreme rainfall events and identifies the most effective locations in New York City to install green infrastructure for detaining excess stormwater runoff. The results of this study are beneficial for planners working on stormwater management and the approach is broadly applicable because it does not rely on extensive sewer system information.  相似文献   

Automatic urban building boundary extraction from high resolution aerial images using an innovative model of active contours     

Salman Ahmadi  M.J. Valadan Zoej  Hamid Ebadi  Hamid Abrishami Moghaddam  Ali Mohammadzadeh 《International Journal of Applied Earth Observation and Geoinformation》2010

To present a new method for building boundary detection and extraction based on the active contour model, is the main objective of this research. Classical models of this type are associated with several shortcomings; they require extensive initialization, they are sensitive to noise, and adjustment issues often become problematic with complex images. In this research a new model of active contours has been proposed that is optimized for the automatic building extraction. This new active contour model, in comparison to the classical ones, can detect and extract the building boundaries more accurately, and is capable of avoiding detection of the boundaries of features in the neighborhood of buildings such as streets and trees. Finally, the detected building boundaries are generalized to obtain a regular shape for building boundaries. Tests with our proposed model demonstrate excellent accuracy in terms of building boundary extraction. However, due to the radiometric similarity between building roofs and the image background, our system fails to recognize a few buildings.  相似文献   

An Introduction to MODISI and SCMOD Methods for Correction of the MODIS Snow Assessment Algorithm   总被引：1，自引：0，他引：1  

Mohammad Reza Mobasheri  Hossein Shafizadeh Moghadam  Siavosh Shayan 《Journal of the Indian Society of Remote Sensing》2010,38(4):674-685

Detection, monitoring and precise assessment of the snow covered regions is an important issue. Snow cover area and consequently the amount of runoff generated from snowmelt have a significant effect on water supply management. To precisely detect and monitor the snow covered area we need satellite images with suitable spatial and temporal resolutions where we usually lose one for the other. In this study, products of two sensors MODIS and ASTER both on board of TERRA platform having low and high spatial resolution respectively were used. The objective of the study was to modify the snow products of MODIS by using simultaneous images of ASTER. For this, MODIS snow index image with high temporal resolution were compared with that of ASTER, using regression and correlation analysis. To improve NDSI index two methods were developed. The first method generated from direct comparison of ASTER averaged NDSI with those of MODIS (MODISI). The second method generated by dividing MODIS NDSI index into 10 codes according to their percentage of surface cover and then compared the results with the difference between ASTER averaged and MODIS snow indices (SCMOD). Both methods were tested against some 16 MODIS pixels. It is found that the precision of the MODISI method was more than 96%. This for SCMOD was about 98%. The RMSE of both methods were as good as 0.02.  相似文献   

Evaluation of two satellite-based products against ground-based observation for drought analysis in the southern part of Iran     

Jafari  Seyedeh Mahboobeh  Nikoo  Mohammad Reza  Dehghani  Maryam  Alijanian  Mohammadali 《Natural Hazards》2020,102(3):1249-1267

Natural Hazards - Water stress or more specifically drought assessment plays a key role in water management, especially in extreme climate conditions. Basically, globally gridded satellite-based...  相似文献   

Location of Areas Prone to Flood Spreading Using GIS (Ilam Province,Iran)     

Nourollah Teimouri  Derikvand  Ehsan  Kharazi  Hossein Ghorbanizadeh  Eslami  Hossein  Jafari  Mohammad Reza 《Water Resources》2020,47(3):421-429

Water Resources - The present study aimed to locate the areas prone to flood spreading in order to manage surface water resources. Therefore, the information layers of slope, land capability,...  相似文献   

Seismic performance and damage incurred by monolithic concrete self-centering rocking walls under the effect of axial stress ratio     

Abouzar Jafari  Mohammad Reza Ghasemi  Habib Akbarzadeh Bengar  Behrooz Hassani 《Bulletin of Earthquake Engineering》2018,16(2):831-858

Self-centering rocking walls offer the possibility of minimizing repair costs and downtimes, and also nullify the residual drift after seismic events, thanks to their self-centering properties. In this paper, the effect of axial stress ratio on the behavior of monolithic self-centering rocking walls is investigated by utilizing a developed finite element model. To verify the validity of the finite element model, results and observed damage in the model are compared with those of a full-scale wall test. The axial stress ratio is varied from 0.024 to 0.30 while keeping the other structural parameters constant. For qualitative damage evaluation, the observed damage in the model compared with expected damage states of desired performance levels. In order to evaluate the incurred damage quantitatively, the amount of crushing and damage in the wall is calculated by utilizing several ratios (crushing ratio and damage ratio). Furthermore, seismic response factors (i.e., μ, R and C_d) are calculated for different axial stress ratio values. The obtained results showed that, in order to satisfy the requirements of desired performance levels, the maximum axial stress ratio should be approximately within the range of 0.10–0.15. In addition, the maximum overall damage ratio and crushing ratio are suggested to be less than 5%. For axial stress ratio higher than 0.15, the flag-shaped pattern of hysteresis curves completely disappeared and the variation of displacement ductility is less sensitive to axial stress ratio. Considering the maximum axial stress ratio limited to 0.150, values of 4 and 3.5 are conservatively proposed as a period-independent response modification factor and displacement modification factor of the investigated structural wall, respectively.  相似文献   

Random vibration of nonlinear structures with stiffness and strength deterioration by modified tail equivalent linearization method     

Raoufi  Reza  Ghafory-Ashtiany  Mohsen 《地震工程与工程振动(英文版)》2019,18(3):597-610

In this research the tail equivalent linearization method(TELM) has been extended to study structures with degrading materials. The responses of such structures to excitations are non-stationary, even if the excitations are stationary. Non-stationary behavior of the system cannot be considered by conventional TELM. Applying the conventional TELM, the only distinction in the design point excitation for two stationary excitations with different durations is in the addition of a zero value part at the beginning of the design point of the longer excitation. This means that the failure probability is the same for the non-stationary systems under excitations with different durations. Therefore, this solution cannot be correct. In this study, in using TELM for systems with degrading materials, hysteretic energy is replaced by average hysteretic energy, calculated by averaging the obtained hysteretic energy of the structure subjected to a few random sample load realization. In this way, the degradation parameters under design point coincide with those under sample load realizations. Since the average of the hysteretic energy is converges very fast, the modified TELM only requires about tens to hundreds solutions of the response in addition to the ordinary calculations of conventional TELM.  相似文献   

A new boundary element solution to evaluate the geometric effects of the canyon site on the displacement response spectrum     

Tarinejad  Reza  Isari  Mohsen  Taghavi Ghalesari  Abbasali 《地震工程与工程振动(英文版)》2019,18(2):267-284

This paper presents a step-by-step procedure using the three-dimensional boundary element approach to study the behavior of semi-circular canyons under seismic shear waves. The boundary element code TDASC allows utilization for various canyon geometries, evaluation of concurrent seismic waves and calculation of the ground motions on canyons due to an excitation at any arbitrary point of the incident field. Considering the widening ratio of the canyon(including prismatic, semi-prismatic and non-prismatic canyons), wave characteristics(wavelength, dimensionless period, direction) and maximum amplification pattern, the solution was applied to carry out a series of parametric studies. It was shown that canyon form can significantly affect the displacement amplification, especially at the points located on its edges. By increasing the wave dimensionless frequency(η 1), the amplification pattern becomes more complex. On the basis of the results from a variety of considered cases, a new expression has been presented for the limiting wavelength beyond which the widening of the canyon will not have a major effect on the displacement amplification. To verify the reliability of the proposed approach, the obtained results, expressed in terms of displacement amplitude, were compared with those from the available published literature and a reasonably good agreement was observed.  相似文献   

Spatial and Temporal Distribution of Dust‐Bound Trace Metal Elements around Kuhdasht Watershed Area in Iran     

Hamid Alipour  Ahmad Jalalian  Naser Honarjoo  Norair Tommanian  Fereidoon Sarmadian 《洁净——土壤、空气、水》2019,47(10)

Dust, as a source of trace metal elements, affects the health of society. The spatial and temporal concentrations of dust‐bound trace metals (Cd, Pb, Ni, Zn, Cu, and Mn) in Kuhdasht watershed (456 km²), Lorestan Province, Iran, is investigated. Dust is collected using glass traps placed in ten research stations in the region. The spatial and temporal distribution of dust trace metals are plotted using ARC‐GIS. The highest and the lowest concentrations of Zn (9751150 mg kg^?1), Pb (46.352.9 mg kg^?1), and Cd (2.443.30 mg kg^?1) are obtained in winter, of Ni (98110 mg kg^?1) and Cu in autumn (16.053.5 mg kg^?1), and of Mn in summer (385505 mg kg^?1). The spatial concentrations of dust‐bound trace metals indicate all, except Cu, show a decreasing trend from the mountains toward the plains, similar to that of soil and of dust, except for Zn, which shows higher concentrations in dust than in soil. The potential sources of dust‐bound trace metals and their rate of contamination are also investigated using the enrichment and contamination factors. The major sources of Cd and Zn in the dust of watershed are due to anthropogenic activities or from activities outside the borders.  相似文献   

Static and dynamic analysis on slope stability using a DFN-DEM approach on the right abutment of the Karun 4 dam     

Kefayati  Sadegh  Baghbanan  Alireza  Torkan  Masoud  Hashemolhosseini  Hamid  Dehnavi  Roohollah Narimani 《地震工程与工程振动(英文版)》2020,19(4):937-951

Uncertainty in input fracture geometric parameters during analysis of the stability of jointed rock slopes is inevitable and therefore the stochastic discrete fracture network (DFN) — distinct element method (DEM) is an efficient modeling tool. In this research, potentially unstable conditions are detected in the right abutment of the Karun 4 dam and downstream of the dam body as a case study. Two extreme states with small and relatively large block sizes are selected and a series of numerical DEM models are generated using a number of validated DFN models. Stability of the rock slope is assessed in both static and dynamic loading states. Based on the design basis earthquake (DBE) and maximum credible earthquake (MCE) expected in the dam site, histories of seismic waves are applied to analyze the stability of the slope in dynamic earthquake conditions. The results indicate that a MCE is likely to trigger sliding of rock blocks on the rock slope major joint. Furthermore, the dynamic analysis also shows a local block failure by the DBE, which can consequently lead to slope instability over the long term. According to the seismic behavior of the two models, larger blocks are prone to greater instability and are less safe against earthquakes.

  相似文献