Local scour prediction around piers with complex geometry     

Ata Amini  Thamer Ahmed Mohammad 《Marine Georesources & Geotechnology》2017,35(6):857-864

A laboratory study of local scour at complex piers under steady clear-water conditions is presented. The term complex piers is used to define a bridge pier comprising of a column, pile cap, and pile group. Comprehensive data over the full range of possible pile cap elevations for complex piers with different geometries were obtained using five complex pier models, which were scaled down from existing bridges in Malaysia. The data are used to evaluate existing methodologies for characterizing the effective width of complex piers with varying pile cap location relative to the undisturbed streambed. The effect of pile cap location on scour depth is also addressed. To improve the predictions of local scour at complex piers, the new data and some previous data are used to propose a new method to predict local scour depth at complex piers.  相似文献   

Calcium Isotopes (δ^44/40Ca) in MPI-DING Reference Glasses, USGS Rock Powders and Various Rocks: Evidence for Ca Isotope Fractionation in Terrestrial Silicates     

Marghaleray Amini  Anton Eisenhauer  Florian Böhm  Chris Holmden  Katharina Kreissig  Folkmar Hauff  Klaus Peter Jochum 《Geostandards and Geoanalytical Research》2009,33(2):231-247

We report δ^44/40Ca_{(SRM 915a)} values for eight fused MPI‐DING glasses and the respective original powders, six USGS igneous rock reference materials, the U‐Th disequilibria reference material TML, IAEA‐CO1 (Carrara marble) and several igneous rocks (komatiites and carbonatites). Sample selection was guided by three considerations: (1) to address the need for information values on reference materials that are widely available in support of interlaboratory comparison studies; (2) support the development of in situ laser ablation and ion microprobe techniques, which require isotopically homogenous reference samples for ablation; and (3) provide Ca isotope values on a wider range of igneous and metamorphic rock types than is currently available in the scientific literature. Calcium isotope ratios were measured by thermal ionisation mass spectrometry in two laboratories (IFM‐GEOMAR and Saskatchewan Isotope Laboratory) using ⁴³Ca/⁴⁸Ca‐ and ⁴²Ca/⁴³Ca‐double spike techniques and reported relative to the calcium carbonate reference material NIST SRM 915a. The measurement uncertainty in both laboratories was better than 0.2‰ at the 95% confidence level. The impact of different preparation methods on the δ^44/40Ca_{(SRM 915a)} values was found to be negligible. Except for ML3‐B, the original powders and the respective MPI‐DING glasses showed identical δ^44/40Ca_{(SRM 915a)} values; therefore, possible variations in the Ca isotope compositions resulting from the fusion process are excluded. Individual analyses of different glass fragments indicated that the glasses are well homogenised on the mm scale with respect to Ca. The range of δ^44/40Ca_{(SRM 915a)} values in the igneous rocks studied was larger than previously observed, mostly owing to the inclusion of ultramafic rocks from ophiolite sections. In particular, the dunite DTS‐1 (1.49 ± 0.06‰) and the peridotite PCC‐1 (1.14 ± 0.07‰) are enriched in ⁴⁴Ca relative to volcanic rocks (0.8 ± 0.1‰). The Carrara marble (1.32 ± 0.06‰) was also found to be enriched in ⁴⁴Ca relative to the values of assumed precursor carbonates (< 0.8‰). These findings suggest that the isotopes of Ca are susceptible to fractionation at high temperatures by, as yet, unidentified igneous and metamorphic processes.  相似文献   

Evaluation of shear strength of rock joints subjected to cyclic loading   总被引：7，自引：0，他引：7  

M. K. Jafari  K. Amini Hosseini  F. Pellet  M. Boulon  O. Buzzi 《Soil Dynamics and Earthquake Engineering》2003,23(7):619

Variation of the shear strength of rock joints due to cyclic loadings is studied in the present paper. Identical joint surfaces were prepared using a developed moulding method with special mortar and shear tests were performed on these samples under both static and cyclic loading conditions. Different levels of shear displacement were applied on the samples to study joint behaviour before and during considerable relative shear displacement. It was found that the shear strength of joints is related to rate of displacement (shearing velocity), number of loading cycles and stress amplitude. Finally, based on the experimental results, mathematical models were developed for evaluation of shear strength in cyclic loading conditions.  相似文献   

Social vulnerability and participation in disaster recovery decisions: public housing in Galveston after Hurricane Ike     

Hamideh  Sara  Rongerude  Jane 《Natural Hazards》2018,93(3):1629-1648

Natural Hazards - In September 2008, Hurricane Ike caused massive damages to Galveston Island’s residential structures including four public housing developments. These developments were...  相似文献   

Object-based classification of hyperspectral data using Random Forest algorithm     

Saeid Amini  Saeid Homayouni  Abdolreza Safari  Ali A. Darvishsefat 《地球空间信息科学学报》2018,21(2):127-138

This paper presents a new framework for object-based classification of high-resolution hyperspectral data. This multi-step framework is based on multi-resolution segmentation (MRS) and Random Forest classifier (RFC) algorithms. The first step is to determine of weights of the input features while using the object-based approach with MRS to processing such images. Given the high number of input features, an automatic method is needed for estimation of this parameter. Moreover, we used the Variable Importance (VI), one of the outputs of the RFC, to determine the importance of each image band. Then, based on this parameter and other required parameters, the image is segmented into some homogenous regions. Finally, the RFC is carried out based on the characteristics of segments for converting them into meaningful objects. The proposed method, as well as, the conventional pixel-based RFC and Support Vector Machine (SVM) method was applied to three different hyperspectral data-sets with various spectral and spatial characteristics. These data were acquired by the HyMap, the Airborne Prism Experiment (APEX), and the Compact Airborne Spectrographic Imager (CASI) hyperspectral sensors. The experimental results show that the proposed method is more consistent for land cover mapping in various areas. The overall classification accuracy (OA), obtained by the proposed method was 95.48, 86.57, and 84.29% for the HyMap, the APEX, and the CASI data-sets, respectively. Moreover, this method showed better efficiency in comparison to the spectral-based classifications because the OAs of the proposed method was 5.67 and 3.75% higher than the conventional RFC and SVM classifiers, respectively.  相似文献   

An Automated Iridium-Strip Heater for LA-ICP-MS Bulk Analysis of Geological Samples   总被引：1，自引：0，他引：1  

Brigitte Stoll  Klaus Peter Jochum  Kirstin Herwig  Marghaleray Amini  Michael Flanz  Berthold Kreuzburg  Dmitry Kuzmin  Matthias Willbold  Jacinta Enzweiler 《Geostandards and Geoanalytical Research》2008,32(1):5-26

In this paper we describe a flux‐free fusion technique for the highly precise LA‐ICP‐MS bulk analysis of geological samples. For this purpose we have developed an automated iridium‐strip heater with temperature and melt time control. To optimise the homogeneity of the fused glasses and to reduce possible depletion of volatile elements during melting, we undertook experiments with basaltic rock and glass powders using different melting temperatures (1300–1700 °C) and melting times (5‐80 s). Major and trace element microanalysis was performed using EPMA and LA‐ICP‐MS. Homogeneous glasses were obtained for temperatures ≥ 1500 °C and melting times ≥ 10 s. High loss (20‐90%) of highly volatile elements (e.g., Cs, Ge, Sn, Pb) was observed for high melting temperatures (≥ 1600 °C) and long melting times (80 s). Standard melting conditions (1600 °C, 10 s) represent a compromise, as the glasses were homogeneous with respect to major and trace elements and, at the same time, were not depleted in elements with condensation temperatures (at a pressure of 10^?4 bar) higher than about 900 K (e.g., Zr, Hf, Ba, Sr, REE, U, Mo, Ni, Rb, Ga). Several international geological reference materials with SiO₂ ranging between 47% m/m and 59% m/m were prepared using our standard melting conditions (1600 °C, 10 s) and subsequently analysed by LA‐ICP‐MS. These samples also include the new Brazilian basaltic reference material BRP‐1. Matrix‐matched calibration of the LA‐ICP‐MS data was performed using the basaltic reference glasses KL2‐G, ML3B‐G, BCR‐2G and BHVO‐2G. Most analytical data agreed within uncertainty at the 95% confidence level with the GeoReM preferred values published in the GeoReM database for reference materials of geological and environmental interest. To demonstrate routine bulk LA‐ICP‐MS analyses of geochemical and cosmochemical samples using the whole rock fusion technique, we also present trace element data for ocean island basalts from Lanai (Hawaii) and of Martian meteorites.  相似文献   

Fault parameters and macroseismic observations of the May 10, 1997 Ardekul-Ghaen earthquake     

H. Amini  M. Zare  A. Ansari 《Journal of Seismology》2018,22(1):5-19

The Ardekul (Zirkuh) earthquake (May 10, 1997) is the largest recent earthquake that occurred in the Ardekul-Ghaen region of Eastern Iran. The greatest destruction was concentrated around Ardekul, Haji-Abad, Esfargh, Pishbar, Bashiran, Abiz-Qadim, and Fakhr-Abad (completely destroyed). The total surface fault rupture was about 125 km with the longest un-interrupted segment in the south of the region. The maximum horizontal and vertical displacements were reported in Korizan and Bohn-Abad with about 210 and 70 cm, respectively; moreover, other building damages and environmental effects were also reported for this earthquake. In this study, the intensity value XI on the European Macroseismic Scale (EMS) and Environmental Seismic Intensity (ESI) scale was selected for this earthquake according to the maximum effects on macroseismic data points affected by this earthquake. Then, according to its macroseismic data points of this earthquake and Boxer code, some macroseismic parameters including magnitude, location, source dimension, and orientation of this earthquake were also estimated at 7.3, 33.52° N–59.99° E, ~ 75 km long and ~ 21 km wide, and ~ 152°, respectively. As the estimated macroseismic parameters are consistent with the instrumental ones (Global Centroid Moment Tensor (GCMT) location and magnitude equal 33.58° N–60.02° E, and 7.2, respectively), this method and dataset are suggested not only for other instrumental earthquakes, but also for historical events.  相似文献   

Review Paper: Methods of measurement for 4D seismic post-stack time shifts     

Colin MacBeth  Hamed Amini  Saeed Izadian 《Geophysical Prospecting》2020,68(9):2637-2664

The estimation of time-lapse time shifts between two, or several, repeated seismic surveys has become increasingly popular over the past eighteen years. These time shifts are a reliable and informative seismic attribute that can relate to reservoir production. Correction for these time shifts or the underlying velocity perturbations and/or subsurface displacement in an imaging sense also permits accurate evaluation of time-lapse amplitudes by attempting to decouple the kinematic component. To date, there are approximately thirty methods for time-shift estimation described in the literature. We can group these methods into three main families of mathematical development, together with several miscellaneous techniques. Here we detail the underlying bases for these methods, and the acknowledged benefits and weaknesses of each class of method highlighted. We illustrate this review with a number of time-lapse seismic examples from producing fields. No method is necessarily superior to the others, as its selection depends on ease of implementation, noise characteristics of the field data, and whether the inherent assumptions suit the case in question. However, cross-correlation stands out as the algorithm of choice based on the Pareto principle and waveform inversion the algorithm delivering best resolution. This is a companion study to the previous review of time-shift magnitudes and a discussion of their rock physics basis.  相似文献   

3D numerical simulation of flow field around twin piles     

Ata Amini  Akram Asadi Parto 《Acta Geophysica》2017,65(6):1243-1251

In this study to identify the flow pattern and local scour mechanism around pile groups, the flow field was simulated using FLOW-3D software. A pair of pile on a flat-bed channel with side by side and tandem arrangements was investigated. To establish Navier–Stokes equations, the RNGk-ε turbulence model was used and the results were verified using experimental data. In case of FLOW-3D capability, it was found that the software was able to properly simulate the expected interaction between the pile groups. The results of flow field simulation showed that Reynolds number and the pile spacing are the most influential variables in forming vortices. The flow around tandem pile and the downward flow around wake vortices were more intense and complicate in comparison with side by side arrangements and single pile.  相似文献   

Wildfire impacts on schools and hospitals following the 2018 California Camp Fire     

Schulze  Stefanie S.  Fischer  Erica C.  Hamideh  Sara  Mahmoud  Hussam 《Natural Hazards》2020,104(1):901-925

Natural Hazards - Wildfire impacts&nbsp;on communities have become more pronounced in recent years as the intensity and frequency of wildfires have increased in densely populated areas of the...  相似文献