Mary Anning,Alfred Nicholson Leeds and Steve Etches. Comparing the three most important UK ‘amateur’ fossil collectors and their collections     

Leslie F. Noè  Marcela Gómez-Pérez  Robert Nicholls 《Proceedings of the Geologists' Association. Geologists' Association》2019,130(3-4):366-389

Mary Anning, Alfred Nicholson Leeds and Steve Etches form part of a long line of individuals who furnished a substantial addition to our understanding of marine and terrestrial ecosystems through collecting significant numbers of superb fossils. For all three collectors, fossils became a factor that dominated their lives, and their fossil collecting led to the discovery of numerous taxa new to science. Extensive collecting was made possible by the fortunate circumstances of living ‘in the right place at the right time’, close to fine-grained UK Jurassic deposits (Lagerstätten) with well-preserved large Jurassic marine reptiles. All three were highly-motivated and developed a considerable skill sets for discovering, collecting, preparing, conserving and displaying fossils. They developed personal and professional interactions with family and friends, and university and museum professionals, although their collecting resulted in variable recognition of their work. Each collector can be considered a complex mix of amateur and professional: Mary Anning, a professional fossil collector and amateur palaeontologist; Alfred Leeds transitioned from amateur to professional fossil collector, but remained an amateur palaeontologist; and Steve Etches has remained an amateur fossil collector and palaeontologist. However, all three exhibited an entirely professional outlook to collecting, and should be considered professionals of the highest degree. The impact of Mary Anning, Alfred Nicholson Leeds and Steve Etches has been critical for the development of Palaeontology as a science, and without whom palaeontology, with all its associated benefits to a wide scientific and non-scientific audience, would not be as rich as we currently know it.  相似文献   

Effectiveness of post-fire salvage logging stream buffer management for hillslope erosion in the U.S. Inland Northwest Mountains     

Peter R. Robichaud  Edwin D. Bone  Sarah A. Lewis  Erin S. Brooks  Robert E. Brown 《水文研究》2021,35(1):e13943

Active wildfire seasons in the western U.S. warrant the evaluation of post-fire forest management strategies. Ground-based salvage logging is often used to recover economic loss of burned timber. In unburned forests, ground-based logging often follows best management practices by leaving undisturbed areas near streams called stream buffers. However, the effectiveness of these buffers has not been tested in a post-wildfire setting. This experiment tested buffer width effectiveness with a novel field-simulated rill experiment using sediment-laden runoff (25 g/L) released over 40 min at evenly timed flow rates (50, 100 and 150 L/min) to measure surface runoff travel length and sediment concentration under unburned and high and low soil burn severity conditions at 2-, 10- and 22-month post-fire. High severity areas 2-month post-fire had rill lengths of up to 100 m. Rill length significantly decreased over time as vegetation regrowth provided ground cover. Sediment concentration and sediment dropout rate also varied significantly by soil burn severity. Sediment concentrations were 19 g/L for the highest flow 2-month post-fire and reduced to 6.9–14 g/L 10-month post-fire due to abundant vegetation recovery. The amount of sediment dropping out of the flow consistently increased over the study period with the low burn severity rate of 1.15 g L⁻¹ m⁻¹ approaching the unburned rate of 1.29 g L⁻¹ m⁻¹ by 2-year post-fire. These results suggest that an often-used standard, 15 m buffer, was sufficient to contain surface runoff and reduce sediment concentration on unburned sites, however buffers on high burn severity sites need to be eight times greater (120 m) immediately after wildfire and four times greater (60 m) 1-year post-fire. Low burn severity areas 1-year post-fire may need to be only twice the width of an unburned buffer (30 m), and 2-year post-fire these could return to unburned widths.  相似文献   

William Smith's map brought alive by digital remastering     

Alan R. Butcher  Duncan Pirrie  Gavyn K. Rollinson  Hanna Horsch  Stephen P. Hesselbo  Michael Owen  David Haberlah 《Geology Today》2020,36(5):175-182

The geological mapping carried out by William Smith, which resulted in the publication of his famous map in 1815, was remarkable in many respects, not least because it relied on him being able to make consistent and accurate observations on the rock types he encountered during his fieldwork. This ability, gained from his many years studying rocks, allowed him to observe features with his own eyes (or at the very least, with the aid of a simple magnifying device) that others could not. We take a new look at William Smith's original stratigraphical sequences, and with samples collected from his classic field areas (many of which are around the city of Bath, Somerset, UK), demonstrate how spatial mineralogy mapping can be incorporated into the modern age of digital mapping.  相似文献   

Insights into agricultural influences and weathering processes from major ion patterns          下载免费PDF全文

Robert van Geldern  Peter Schulte  Michael Mader  Alfons Baier  Johannes A.C. Barth  Tobias R. Juhlke  Kern Lee 《水文研究》2018,32(7):891-903

Karst areas and their catchments pose a great challenge for protection because fast conduit flow results in low natural attenuation of anthropogenic contaminants. Studies of the hydrochemistry of karst sources and river solutes are an important tool for securing and managing water resources. A study of the geochemical downriver evolution of the Wiesent River and its tributaries, located in a typical karst terrain, revealed unexpected downstream decreases of nitrate with maximum mean values of 30 mg/L at the source to minimum values of 18 mg/L near the river mouth. This trend persisted over the length of the river even though increased agricultural activities are evident in the downstream section of the catchment. This pattern is caused by fertilizer inputs via diffusive and fast conduits flow from karst lithology in the upstream area that may have reached the river's source even from beyond the hydrological catchment boundaries. Further downstream, these influences became diluted by tributary inputs that drain subcatchments dominated by claystone and sandstone lithologies that increased potassium and sulphate concentrations. Our findings indicate that bedrock geology remains the dominant control on the major ion chemistry of the Wiesent River and that agricultural influences are strongest near the headwaters despite increased land use further downstream, due to long‐term storage and accumulation in karst aquifers. This feature may not be unique to the Wiesent River system, as carbonates cover significant portions of the Earth's surface and subsequent work in other river systems could establish whether such patterns are ubiquitous worldwide.  相似文献   

Climate driven coevolution of weathering profiles and hillslope topography generates dramatic differences in critical zone architecture     

Robert S. Anderson  Harihar Rajaram  Suzanne P. Anderson 《水文研究》2019,33(1):4-19

Considerable debate revolves around the relative importance of rock type, tectonics, and climate in creating the architecture of the critical zone. We demonstrate the importance of climate and in particular the rate of water recharge to the subsurface, using numerical models that incorporate hydrologic flowpaths, chemical weathering, and geomorphic rules for soil production and transport. We track alterations in both solid phase (plagioclase to clay) and water chemistry along hydrologic flowpaths that include lateral flow beneath the water table. To isolate the role of recharge, we simulate dry and wet cases and prescribe identical landscape evolution rules. The weathering patterns that develop differ dramatically beneath the resulting parabolic interfluves. In the dry case, incomplete weathering is shallow and surface parallel, whereas in the wet case, intense weathering occurs to depths approximating the base of the bounding channels, well below the water table. Exploration of intermediate cases reveals that the weathering state of the subsurface is strongly governed by the ratio of the rate of advance of the weathering front itself controlled by the water input rate, and the rate of erosion of the landscape. The system transitions between these end‐member behaviours rather abruptly at a weathering front speed ‐ erosion rate ratio of approximately 1. Although there are undoubtedly direct roles for tectonics and rock type in critical zone architecture, and yet more likely feedbacks between these and climate, we show here that differences in hillslope‐scale weathering patterns can be strongly controlled by climate.  相似文献   

Increasing Singapore's resilience to drought          下载免费PDF全文

Alan D. Ziegler  James P. Terry  Grahame J.H. Oliver  Daniel A. Friess  Chong Joon Chuah  Winston T.L. Chow  Robert J. Wasson 《水文研究》2014,28(15):4543-4548

  相似文献   

Evaluating post-wildfire logging-slash cover treatment to reduce hillslope erosion after salvage logging using ground measurements and remote sensing     

Peter R. Robichaud  Sarah A. Lewis  Robert E. Brown  Edwin D. Bone  Erin S. Brooks 《水文研究》2020,34(23):4431-4445

Continuing long and extensive wildfire seasons in the Western US emphasize the need for better understanding of wildfire impacts including post-fire management scenarios. Advancements in our understanding of post-fire hillslope erosion and watershed response such as flooding, sediment yield, and debris flows have recently received considerable attention. The potential impacts of removing dead trees, called salvage logging, has been studied, however the use of remotely sensed imagery after salvage logging to evaluate spatial patterns and recovery is novel. The 2015 North Star Fire provided an opportunity to evaluate hillslope erosion reduction using two field experiments and coincidental remotely sensed imagery over 3 years. Simulated rill experiments with four flow rates were used to quantify hillslope erosion on skidder trails with and without added logging slash compared with a burned-only control. Seven replicated hillslope silt fence plots with the same treatments were also evaluated for natural rainfall events. WorldView-2 satellite imagery was used to relate ground cover and erodible bare soil between the two experiments using multi-temporal Normalized Differenced Vegetation Index (NDVI) values. Results indicate that the skid trails produced significantly more sediment (0.70 g s⁻¹) than either the slash treated skid trail (0.34 g s⁻¹) or controls (0.04 g s⁻¹) with the simulated rill experiment. Similarly, under natural rainfall conditions sediment yield from hillslope silt fence plots was significantly greater for the skid trail (3.42 Mg ha⁻¹) than either the slash treated skid trail (0.18 Mg ha⁻¹) or controls (0 Mg ha⁻¹). An NDVI value of 0.32 on all plots over all years corresponded to a ground cover of about 60% which is an established threshold for erosion reduction. Significant relationships between NDVI, ground cover, and sediment values suggest that NDVI may help managers evaluate ground cover and erosion potential remotely after disturbances such as a wildfire or salvage logging.  相似文献   

A Global Terrestrial Reference Frame from simulated VLBI and SLR data in view of GGOS     

Susanne Glaser  Rolf König  Dimitrios Ampatzidis  Tobias Nilsson  Robert Heinkelmann  Frank Flechtner  Harald Schuh 《Journal of Geodesy》2017,91(7):723-733

In this study, we assess the impact of two combination strategies, namely local ties (LT) and global ties (GT), on the datum realization of Global Terrestrial Reference Frames in view of the Global Geodetic Observing System requiring 1 mm-accuracy. Simulated Very Long Baseline Interferometry (VLBI) and Satellite Laser Ranging (SLR) data over a 7 year time span was used. The LT results show that the geodetic datum can be best transferred if the precision of the LT is at least 1 mm. Investigating different numbers of LT, the lack of co-located sites on the southern hemisphere is evidenced by differences of 9 mm in translation and rotation compared to the solution using all available LT. For the GT, the combination applying all Earth rotation parameters (ERP), such as pole coordinates and UT1-UTC, indicates that the rotation around the Z axis cannot be adequately transferred from VLBI to SLR within the combination. Applying exclusively the pole coordinates as GT, we show that the datum can be transferred with mm-accuracy within the combination. Furthermore, adding artificial stations in Tahiti and Nigeria to the current VLBI network results in an improvement in station positions by 13 and 12%, respectively, and in ERP by 17 and 11%, respectively. Extending to every day VLBI observations leads to 65% better ERP estimates compared to usual twice-weekly VLBI observations.  相似文献   

On the consistency of the current conventional EOP series and the celestial and terrestrial reference frames     

Santiago Belda  Robert Heinkelmann  José M. Ferrándiz  Tobias Nilsson  Harald Schuh 《Journal of Geodesy》2017,91(2):135-149

Precise transformation between the celestial reference frames (CRF) and terrestrial reference frames (TRF) is needed for many purposes in Earth and space sciences. According to the Global Geodetic Observing System (GGOS) recommendations, the accuracy of positions and stability of reference frames should reach 1 mm and 0.1 mm year\(^{-1}\), and thus, the Earth Orientation Parameters (EOP) should be estimated with similar accuracy. Different realizations of TRFs, based on the combination of solutions from four different space geodetic techniques, and CRFs, based on a single technique only (VLBI, Very Long Baseline Interferometry), might cause a slow degradation of the consistency among EOP, CRFs, and TRFs (e.g., because of differences in geometry, orientation and scale) and a misalignment of the current conventional EOP series, IERS 08 C04. We empirically assess the consistency among the conventional reference frames and EOP by analyzing the record of VLBI sessions since 1990 with varied settings to reflect the impact of changing frames or other processing strategies on the EOP estimates. Our tests show that the EOP estimates are insensitive to CRF changes, but sensitive to TRF variations and unmodeled geophysical signals at the GGOS level. The differences between the conventional IERS 08 C04 and other EOP series computed with distinct TRF settings exhibit biases and even non-negligible trends in the cases where no differential rotations should appear, e.g., a drift of about 20 \(\upmu \)as year\(^{-1 }\)in \(y_{\mathrm{pol }}\) when the VLBI-only frame VTRF2008 is used. Likewise, different strategies on station position modeling originate scatters larger than 150 \(\upmu \)as in the terrestrial pole coordinates.  相似文献   

The extension of the parametrization of the radio source coordinates in geodetic VLBI and its impact on the time series analysis     

Maria Karbon  Robert Heinkelmann  Julian Mora-Diaz  Minghui Xu  Tobias Nilsson  Harald Schuh 《Journal of Geodesy》2017,91(7):755-765

The radio sources within the most recent celestial reference frame (CRF) catalog ICRF2 are represented by a single, time-invariant coordinate pair. The datum sources were chosen mainly according to certain statistical properties of their position time series. Yet, such statistics are not applicable unconditionally, and also ambiguous. However, ignoring systematics in the source positions of the datum sources inevitably leads to a degradation of the quality of the frame and, therefore, also of the derived quantities such as the Earth orientation parameters. One possible approach to overcome these deficiencies is to extend the parametrization of the source positions, similarly to what is done for the station positions. We decided to use the multivariate adaptive regression splines algorithm to parametrize the source coordinates. It allows a great deal of automation, by combining recursive partitioning and spline fitting in an optimal way. The algorithm finds the ideal knot positions for the splines and, thus, the best number of polynomial pieces to fit the data autonomously. With that we can correct the ICRF2 a priori coordinates for our analysis and eliminate the systematics in the position estimates. This allows us to introduce also special handling sources into the datum definition, leading to on average 30 % more sources in the datum. We find that not only the CPO can be improved by more than 10 % due to the improved geometry, but also the station positions, especially in the early years of VLBI, can benefit greatly.  相似文献