Pingos on Earth and Mars     

Devon M. Burr  Kenneth L. Tanaka  Kenji Yoshikawa 《Planetary and Space Science》2009,57(5-6):541-555

Pingos are massive ice-cored mounds that develop through pressurized groundwater flow mechanisms. Pingos and their collapsed forms are found in periglacial and paleoperiglacial terrains on Earth, and have been hypothesized for a wide variety of locations on Mars. This literature review of pingos on Earth and Mars first summarizes the morphology of terrestrial pingos and their geologic contexts. That information is then used to asses hypothesized pingos on Mars. Pingo-like forms (PLFs) in Utopia Planitia are the most viable candidates for pingos or collapsed pingos. Other PLFs hypothesized in the literature to be pingos may be better explained with other mechanisms than those associated with terrestrial-style pingos.  相似文献   

Melting of iron–silicon alloy up to the core–mantle boundary pressure: implications to the thermal structure of the Earth’s core     

Hidetoshi Asanuma  Eiji Ohtani  Takeshi Sakai  Hidenori Terasaki  Seiji Kamada  Tadashi Kondo  Takumi Kikegawa 《Physics and Chemistry of Minerals》2010,37(6):353-359

The melting temperature of Fe–18 wt% Si alloy was determined up to 119 GPa based on a change of laser heating efficiency and the texture of the recovered samples in the laser-heated diamond anvil cell experiments. We have also investigated the subsolidus phase relations of Fe–18 wt% Si alloy by the in-situ X-ray diffraction method and confirmed that the bcc phase is stable at least up to 57 GPa and high temperature. The melting curve of the alloy was fitted by the Simon’s equation, P(GPa)/a = (T _m(K)/T ₀) ^c , with parameters, T ₀ = 1,473 K, a = 3.5 ± 1.1 GPa, and c = 4.5 ± 0.4. The melting temperature of bcc Fe–18 wt% Si alloy is comparable with that of pure iron in the pressure range of this work. The melting temperature of Fe–18 wt% Si alloy is estimated to be 3,300–3,500 K at 135 GPa, and 4,000–4,200 K at around 330 GPa, which may provide the lower bound of the temperatures at the core–mantle boundary and the inner core–outer core boundary if the light element in the core is silicon.  相似文献   

Determination of the oxidation state of radiogenic Pb in natural zircon using X-ray absorption near-edge structure     

Kazuya Tanaka  Yoshio Takahashi  Kenji Horie  Hiroshi Shimizu  Takashi Murakami 《Physics and Chemistry of Minerals》2010,37(4):249-254

We examined the L_III-edge Pb X-ray absorption near-edge structure (XANES) of three natural zircon samples with different amounts of radiation doses (1.9 × 10¹⁵ to 6.8 × 10¹⁵ α-decay events/mg). The results suggest that the oxidation state of radiogenic Pb in the zircon sample with the highest radiation dose is divalent. The XANES spectra of the two other samples with lower radiation doses suggest that radiogenic Pb(II) is present, and further that some Pb may be tetravalent. This is the first work on the determination of the oxidation state of radiogenic Pb in natural zircon using XANES.  相似文献   

Fragmentation model dependence of collision cascades     

Hiroshi Kobayashi  Hidekazu Tanaka 《Icarus》2010,206(2):735-746

Mass depletion of bodies through successive collisional disruptions (i.e., collision cascade) is one of the most important processes in the studies of the asteroids belt, the Edgeworth-Kuiper belt, debris disks, and planetary formation. The collisional disruption is divided into two types, i.e., catastrophic disruption and cratering. Although some studies of the collision cascades neglected the effect of cratering, it is unclear which type of disruption makes a dominant contribution to the collision cascades. In the present study, we construct a simple outcome model describing both catastrophic disruption and cratering, which has some parameters characterizing the total ejecta mass, the mass of the largest fragment, and the power-law exponent of the size distribution of fragments. Using this simple outcome model with parameters, we examine the model dependence of the mass depletion time in collision cascades for neglect of coalescence of colliding bodies due to high collisional velocities. We find the cratering collisions are much more effective in collision cascades than collisions with catastrophic disruption in a wide region of the model parameters. It is also found that the mass depletion time in collision cascades is mainly governed by the total ejecta mass and almost insensitive to the mass of the largest fragment and the power-law exponent of fragments for a realistic parameter region. The total ejecta mass is usually determined by the ratio of the impact energy divided by the target mass (i.e. Q-value) to its threshold value for catastrophic disruption, as well as in our simple model. We derive a mass depletion time in collision cascades, which is determined by of the high-mass end of collision cascades. The mass depletion time derived with our model would be applicable to debris disks and planetary formation.  相似文献   

A heating process of Kuchi-erabu-jima volcano,Japan, as inferred from geomagnetic field variations and electrical structure     

Wataru Kanda  Mitsuru Utsugi  Yoshikazu Tanaka  Takeshi Hashimoto  Ikuko Fujii  Toshiaki Hasenaka  Nobuaki Shigeno 《Journal of Volcanology and Geothermal Research》2010,189(1-2):158-171

Since August 2000, we have recorded the total intensity of the geomagnetic field at the summit area of Kuchi-erabu-jima volcano, where phreatic eruptions have repeatedly occurred. A time series analysis has shown that the variations in the geomagnetic field since 2001 have a strong relationship to an increase in volcanic activity. These variations indicate thermal demagnetization of the subsurface around the presently active crater. The demagnetization source for the early variations, until summer 2002, was estimated at about 200 m below sea level. For the variations since 2003, the source was modeled on the basis of the expansion of a uniformly magnetized ellipsoid. The modeling result showed that the source is located at 300 m above sea level beneath the crater. We carried out an audio-frequency magnetotelluric survey with the aim of obtaining a relation between the demagnetization source and the shallow structure of the volcano. A two-dimensional inversion applied to the data detected two good conductors, a shallow thin one which is restricted to a region around the summit area, while the other extends over the edifice at depths between 200 and 800 m. These conductors are regarded as clay-rich layers with low permeability, which were assumed to be generated through hydrothermal alteration. The demagnetization source for the early variations was possibly located at the lower part of the deep conductor and the source after 2003 lies between the two conductors, where groundwater is considered to be abundant. Based on these results, as well as on seismological, geodetic, and geochemical information, we propose a heating process of the Kuchi-erabu-jima volcano. In the initial stage, high-temperature volcanic gases supplied from the deep-seated magma remained temporarily at the level around the lower part of the less permeable deep conductor since the ascent path had not yet been established. Then, when the pathway developed as a result of repeated earthquakes, it became possible for a massive flux of volcanic gases to ascend through the conductor. The high temperature gases reached the aquifer located above the conductor and the heat was efficiently transported to the surrounding rocks through the groundwater. As a consequence, an abrupt increase of the gas flux and diffusion of the heat through the aquifer occurred and the high-temperature zone expanded. Since the high-temperature zone is located beneath another conductor, which acts as caprock, we assume that the energy of the phreatic explosion is accumulated there.  相似文献   

Seismic response controlled structure with Active Variable Stiffness system     

Takuji Kobori  Motoichi Takahashi  Tadashi Nasu  Naoki Niwa  Katsura Ogasawara 《地震工程与结构动力学》1993,22(11):925-941

The Active Variable Stiffness (AVS) system is proposed as a seismic response control system. It actively controls structural characteristics, such as stiffness of a building, to establish a non-resonant state against earthquake excitations, thus suppressing the building's response. It consumes a relatively small amount of energy and maintains the safety of the building in moderate to severe earthquakes. In order to accumulate practical data and investigate them, a building has been constructed as a trial. This paper describes the applied system, the control algorithm, verification of stiffness selection, results of tests for verifying system characteristics, some observed earthquake records and simulation analyses. Responses in controlled and uncontrolled states have been compared to show the effectiveness of the proposed system.  相似文献   

Generation of greenhouse effect gases from different landfill types   总被引：3，自引：0，他引：3  

Yasushi Matsufuji  Masataka Hanashima  Syuji Nagano  Ayako Tanaka 《Engineering Geology》1993,34(3-4):181-187

Recently much attention is focussed on the problems of global warming due to greenhouse effect gases, notably carbon dioxide and methane. Because these gases cause important problems to the global environment, their generation from landfill sites containing solid wastes has drawn attention and their environmental impact is causing concern.

Generally, the gases associated with a greenhouse effect include carbon dioxide, methane and nitrous oxide. However, there are no general basic data available concerning gases generated from biodegradation of solid wastes in landfill sites. Specifically, no assessment has been made concerning greenhouse effect gases from different landfill types.

This paper proposes a quantitative model for estimating the gasification rate by different landfill types. The model is based on measurement data for a long-term material balance for an aerobic landfill and an anaerobic landfill, obtained with two types of large-scale lysimeters.

This paper will also give an estimate for the amount of greenhouse effect gases by for different types of landfill and propose countermeasures for their reduction.  相似文献   

Trace element concentrations in silicate spherules from oceanic sediments     

Hiroshi Nagasawa  Kazuo Yamakoshi  Tadashi Shimamura 《Geochimica et cosmochimica acta》1979,43(2):267-272

The possible existence of meteoritic spherules was investigated among several silicate spherules separated from oceanic sediments and analyzed by means of INAA (instrumental neutron activation analysis).A 0.72 mg glassy spherule was found to have uniform enrichment of 4 ~ 5 for the refractory REE (rare earth elements) and Sc with substantial depletion of Ce relative to chondritic abundances. This implies that this spherule is meteoritic in origin and that the enrichment of refractory elements was established by high temperature heating in a high O/H environment, possibly at the time of entering the Earth's atmosphere.The other three analyzed spherules showed major and trace element abundances that are consistent with an origin in the oceanic environment.  相似文献   

Generation of hydrogen ions and hydrogen gas in quartz–water crushing experiments: an example of chemical processes in active faults     

K.?SaruwatariEmail author  J.?Kameda  H.?Tanaka 《Physics and Chemistry of Minerals》2004,31(3):176-182

To understand the fundamental chemical processes of fluid–rock interaction during the pulverization of quartz grains in fault zones, quartz grains were crushed within pure water. The crushing experiments were performed batch style using a shaking apparatus. The crushing process induced a decrease in pH and an increase in hydrogen gas with increased shaking duration. The amount of hydrogen ions generated was five times larger than that of the hydrogen gas, which was consistent with the amount of Si radicals estimated from electron spin resonance measurements by Hochstrasser and Antonini (1972). This indicates that hydrogen gas was generated by consuming most of the Si radicals. The generation of hydrogen ions was most likely related to the presence of silanols on the newly formed mineral surface, implying a change of proton activities in the fluid after pulverization of quartz.  相似文献   

Water and sediment quality, partial mass budget and effluent N loading in coastal brackishwater shrimp farms in Bangladesh   总被引：2，自引：0，他引：2  

Shahidul Islam M  Jahangir Sarker M  Yamamoto T  Abdul Wahab M  Tanaka M 《Marine pollution bulletin》2004,48(5-6):471-485

The present study aimed to quantify the water and sediment quality and growth and production parameters and to establish nutrient budgets for an average of five selected semi-intensive shrimp ponds in Bangladesh over a growing cycle. Physico-chemical parameters of water and sediments were measured and analyzed by standard methods. Gross yield (kg ha-1) of shrimp was calculated from the stocking and harvesting data. Finally, a partial nutrient mass budget for N and P was calculated. Most of the parameters of water and sediments correlated significantly with each other suggesting a high degree of interactions between different parameters in the system. Significantly higher concentrations of all species of nitrogenous nutrients were recorded in the effluent waters than that entering into the ponds. Therefore, a high loading and net output of nitrogenous nutrients in effluent waters was documented. The study also indicated a net discharge of solids and minerals through effluent loading. However, significantly lower concentrations of phosphorus in the effluent water indicated a net retention and trapping of phosphatic nutrients in the environment. Total production ranged between 532.0 and 697.0 kg ha-1 cycle-1 and P. monodon production between 484.0 and 562.0 kg ha-1 cycle-1. Ponds gained nitrogen primarily from intake water (55%) and fertilizers (29%), and nitrogen was lost primarily from water exchange (78%) and harvested shrimp (12%). Phosphorus gain occurred mostly from intake water (52%) and fertilizers (25%), and phosphorus was lost primarily from water exchange (52%) and harvested shrimp (3.3%). About 10% of input nitrogen and 44% of phosphorus were not accounted for in measured losses, and presumably were fixed or metabolized in the system. On average, 78 g N was discharged to and 25 g P was removed from the surrounding water by the system for each kilogram of shrimp produced. Mean conversion of feed nitrogen and phosphorus to shrimp flesh averaged 74% and 40%, respectively. It was concluded that semi-intensive systems serve as net supplier of N to and net remover of P from the surrounding water.  相似文献