Limit states and failure mechanisms of viscous dampers and the implications for large earthquakes     

H. Kit Miyamoto  Amir S. J. Gilani  Akira Wada  Christopher Ariyaratana 《地震工程与结构动力学》2010,39(11):1279-1297

Fluid viscous dampers are used to control story drifts and member forces in structures during earthquake events. These elements provide satisfactory performance at the design‐level or maximum considered earthquake. However, buildings using fluid viscous dampers have not been subjected to very large earthquakes with intensities greater than the design and maximum considered events. Furthermore, an extensive database of viscous damper performance during large seismic events does not exist. To address these issues, a comprehensive analytical and experimental investigation was conducted to determine the performance of damped structures subjected to large earthquakes. A critical component of this research was the development and verification of a detailed viscous damper mathematical model that incorporates limit states. The development of this model and the laboratory and simulation results conclude good correlation with the new model and the damper limit states and provide superior results compared with the typical damper model when considering near collapse evaluation of structures. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Process length variation of the cyst of the dinoflagellate Protoceratium reticulatum in the North Pacific and Baltic‐Skagerrak region: calibration as an annual density proxy and first evidence of pseudo‐cryptic speciation     

Kenneth Neil Mertens  Manuel Bringué  Nicolas Van Nieuwenhove  Yoshihito Takano  Vera Pospelova  Andre Rochon  Anne De Vernal  Taoufik Radi  Barrie Dale  R. Timothy Patterson  Kaarina Weckström  Elinor Andrén  Stephen Louwye  Kazumi Matsuoka 《第四纪科学杂志》2012,27(7):734-744

Process length variation of cysts of the dinoflagellate Protoceratium reticulatum (Claparède et Lachmann) Bütschli in surface sediments from the North Pacific was investigated. The average process length showed a significant inverse relation to annual seawater density: σ_{t annual} = ?0.8674 × average process length + 1029.3 (R² = 0.84), with a standard error of 0.78 kg m^?3. A sediment trap study from Effingham Inlet in British Columbia revealed the same relationship between average process length and local seawater density variations. In the Baltic–Skagerrak region, the average process length variation was related significantly to annual seawater density: σ_{t annual} = 3.5457 × average process length ? 993.28 (R² = 0.86), with a standard error of 3.09 kg m^?3. These calibrations cannot be reconciled, which accentuates the regional character of the calibrations. This can be related to variations in molecular data (small subunit, long subunit and internal transcribed spacer sequences), which show the presence of several genotypes and the occurrence of pseudo‐cryptic speciation within this species. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Magma transport and reservoir formation by a system of propagating cracks   总被引：2，自引：0，他引：2  

Akira Takada 《Bulletin of Volcanology》1989,52(2):118-126

A system of propagating cracks may explain magma transport and the evolution of a volcano. This paper considers only a basaltic magma. The system is controlled by two boundary conditions: the stress field, and the production rate of the magma-filled cracks in the mantle. Numerical solutions of crack propagation for various stress conditions, with a constant production rate high enough to coalesce isolated cracks, were performed, and the results applied to different tectonic conditions. For the hydrostatic stress conditions, most magma-filled cracks beneath a polygenetic volcano become trapped either in the lower crust, because there the density difference between magma and the host rocks () becomes suddenly small, compared with that in the mantle, or trapped in the upper crust, because there is near to zero. Magma traps composed of such cracks may grow into magma reservoirs if the production rate of cracks in the mantle is large. If horizontal stress with a vertical gradient is superimposed on the hydrostatic condition in the crust, that is, tensile stress which increases upward or compressional stress which increases downward, magmafilled cracks, even if the density of magma is higher than that of the crust, may ascend directly without trapping. When the crust undergoes relative tension, magma-filled cracks may become trapped. Then, the lower part of the trap may grow into a magma reservoir, while the upper part may become filled with dikes. When the production rate of cracks is small, an initial magma-filled crack can rise directly to the surface only when the stress with a gradient is superimposed as mentioned above, or when the average density in a crack decreases, owing to, for example, vesiculation of volatile components.  相似文献   

Diurnal freeze–thaw depth in rockwalls: Field measurements and theoretical considerations     

Norikazu Matsuoka 《地球表面变化过程与地形》1994,19(5):423-435

Rock temperatures were monitored for a year at two alpine rockwalls in the Akaishi Range, Japan, where permafrost is absent. Diurnal frost and thaw penetration depths were evaluated from subsurface isotherms drawn on the basis of the temperature records at 0, 10 and 40 cm depths. The surface of the rockwalls experienced more than 100 diurnal freeze-thaw cycles, most of which accompanied a frost or thaw penetration shallower than 50 cm, and several long duration cycles with deeper frost or thaw penetration. Theoretical frost and thaw depths were also calculated by incorporating the surface freezing indices into the modified Berggren equation, the results from which were then compared with the actual values. The modified Berggren equation provided values that showed a strong correlation with observed depths, despite somewhat underestimating the actual values. Using the modified Berggren equation, the seasonal frost depth in the observed winter was estimated to be about 4·5 m. The frost and thaw depths are considered to give the maximum estimation of the depth to which frost-induced cracking can propagate in the bedrock.  相似文献   

Rock weathering processes and landform development in the Sør Rondane Mountains, Antarctica     

Norikazu Matsuoka 《Geomorphology》1995,12(4)

Field observations of weathering processes and the related landforms, combined with laboratory analyses of weathering products, permit a synthetic evaluation of Late Cenozoic weathering environments in the Sør Rondane Mountains, Antarctica, an arid upland characterized by low temperatures and strong winds. Rates and character of weathering depend mainly on moisture availability and the bedrock geology. Under the humid weathering regime that occurs only locally around the margin of the present sheet, frequent diurnal freeze-thaw cycles in summer cause relatively rapid rock fragmentation. Most of the mountains are situated in the arid weathering regime, under which rock breakdown is very slow unless the rock contains plenty of salts. Salt weathering becomes more intensive and extensive with exposure age, as a result of salt accumulation in rock, eventually producing soils as small as fine-silt size. Lack of clay mineralization even in weathered rocks having been exposed above the ice sheet prior to 4 Ma ago indicates that hydrolysis or carbonation of rock minerals has been insignificant during the past 4 Ma. The final products of weathering are due mainly to salt action and reflect the parent lithology. Resistant fine-grained granite forms strongly oxidized tors carved with tafoni, or fields of mushroom-like boulders overlying the fractured bedrock. Less resistant rocks, like biotite gneiss and amphibolite, produce stone pavements underlain by saline, silty soils up to 30–40 cm thick, the thickness of which corresponds to the maximum thaw depth.  相似文献   

The rate of bedrock weathering by frost action: Field measurements and a predictive model   总被引：1，自引：0，他引：1  

Norikazu Matsuoka 《地球表面变化过程与地形》1990,15(1):73-90

Shattering rate, surface temperature, moisture content, and the physical and strength properties of bedrock were measured in four rockwall sites of the Japanese Alps. Five-year observations revealed that the bedrock shattering rate was usually much higher in the freeze-thaw period from October to next May than in the frost-free period from June to September. This indicates that frost action is the most important shattering process, although unusual heavy rainstorms in summer are also responsible for the shattering. A combination of some empirical relationships derived from recent laboratory experiments leads to a predictive model of the frost shattering rate. This model shows that the annual shattering rate is dependent on the annual freeze-thaw frequency on the rock surface, and the degree of saturation and tensile strength of the rock masses. The coefficients involved in the model were determined using the field data.  相似文献   

Rates of tafoni weathering on uplifted shore platforms in Nojima-Zaki,Boso Peninsula,Japan     

Yukinori Matsukura  Norikazu Matsuoka 《地球表面变化过程与地形》1991,16(1):51-56

Many tafoni occur on the faces of marine cliffs on three uplifted shore platforms with different altitudes and with known ages of emergence. The mean value of the ten largest depths of tafoni, D (cm), was obtained and the period of their formation, t (years), was estimated. The relationship between the two variables was found to be D = 20·3 × (1?e^?0.005t).  相似文献   

Partial melting kinetics of plagioclase-diopside pairs     

Akira Tsuchiyama 《Contributions to Mineralogy and Petrology》1985,91(1):12-23

Partial melting experiments on plagioclase (An₆₀) and diopside have been carried out using pairs of large crystals to investigate textures and kinetics of melting. The experiments were done at one atmosphere pressure as a function of temperature (1,190–1,307° C) and time (1.5–192 h). Melting took place mainly at the plagioclase-diopside contact planes. Reaction zones composed of fine mixtures of calcic plagioclase and melt were developed from the surface of the plagioclase crystal inward. There exists a critical temperature, below which only a few % melting can occur over the duration of the experiments. This sluggish melting is caused by slow NaSi-CaAl diffusion in plagioclase, because the plagioclase crystal must change its composition to produce albite-rich cotectic melts. Diffusion in the solid also affects the chemical composition of the melts. During initial melting, potassium is preferentially extracted from plagioclase because K-Na diffusion in plagioclase is faster than that of NaSi-CaAl. This also causes a shift in the cotectic compositions. Above the critical temperature, on the other hand, melting is promoted by a metastable reaction in which the plagioclase composition does not change, and which produces melts with compositional gradients along the original An₆₀-diopside tie line. The critical temperature is determined by the intersection of the cotectic and the An₆₀-diopside tie line. Interdiffusion coefficients of plagioclase-diopside components in the melt are estimated from melting rates above the critical temperature by using a simplified steady-state diffusion model (e.g., 10^–8 cm²/sec at 1,300° C).Many examples of reaction zones due to partial melting have been described as spongy or fingerprint-like textures in xenoliths. Metastable melting above the critical temperature is considered to take place in natural melting where there is a high degree of melting. However, we cannot exclude the possibility of disequilibrium created by sluggish melting controlled by diffusion in the minerals. If melting occurs close to the solidus, this process can be important even for partial melting in the upper mantle.  相似文献   

Dissolution kinetics of plagioclase in the melt of the system diopside-albite-anorthite,and origin of dusty plagioclase in andesites   总被引：9，自引：5，他引：9  

Akira Tsuchiyama 《Contributions to Mineralogy and Petrology》1985,89(1):1-16

The textures and kinetics of reaction between plagioclase and melts have been investigated experimentally, and origin of dusty plagioclase in andesites has been discussed. In the experiments plagioclase of different compositions (An₉₆, An₆₁, An₅₄, An₂₃, and An₂₂) surrounded by glasses of six different compositions in the system diopside-albite-anorthite was heated at temperatures ranging from 1,200 to 1,410° C for 30 min to 88 h. Textures were closely related to temperature and chemical compositions. A crystal became smaller and rounded above the plagioclase liquidus temperature of the starting melt (glass) and remained its original euhedral shape below the liquidus. Whatever the temperature, the crystal-melt interface became rough and often more complicated (sieve-like texture composed of plagioclase-melt mixture in the scale of a few m was developed from the surface of the crystal inward; formation of mantled plagioclase) if the crystal is less calcic than the plagioclase in equilibrium with the surrounding melt, and the interface remained smooth if the crystal is more calcic than the equilibrium plagioclase. From these results the following two types of dissolution have been recognized; (1) a crystal simply dissolves in the melt which is undersaturated with respect to the phase (simple dissolution), and a crystal is partially dissolved to form mantled plagioclase by reaction between sodic plagioclase and calcic melt (partial dissolution). The amount of a crystal dissolved and reacted increased proportional to the square root of time. This suggests that these processes are controlled by diffusion, probably in the crystal.Mantled plagioclase produced in the experiments were very similar both texturally and chemically to some of the so-called resorbed plagioclase in igneous rocks. Chemical compositions and textures of plagioclase phenocrysts in island-arc andesites of magma mixing origin have been examined. Cores of clear and dusty plagioclase were clacic (about An₉₀) and sodic (about An₅₀), respectively. This result indicates that dusty plagioclases were formed by the partial melting due to reaction between sodic plagioclase already precipitated in a dacitic magma and a melt of intermediate composition in a mixed magma during the magma mixing.  相似文献   

Sulfur isotope study of Quaternary volcanic rocks from the Japanese Islands Arc     

Akira Ueda  Hitoshi Sakai 《Geochimica et cosmochimica acta》1984,48(9):1837-1848

The sulfide and sulfate contents and their δ³⁴S values were determined in Quaternary volcanic rocks from the Japanese Islands Arc. The total sulfur contents are much lower (less than 40 ppm) and the δ³⁴S values are higher (+4.4 ± 2.1) than those of ocean-floor basalts (800 ± 100 ppm and +0.8 ± 0.5, respectively; Moore and Fabbi, 1971; Sakaiet al., 1982). Lateral variations of both sulfur content and δ³⁴S values were observed in the four volcanic belts in Japan. In the Northeast Japan belt, the sulfur content (30 ± 10 ppm) of the rocks in the inner zone (the Japan Sea side) is 3 to 5 times that in the outer zone (the Pacific side), although the δ³⁴S values of the two zones are almost the same (+4.3 ± 1.0). The δ³⁴S values for the two belts in West Japan are on the average 2%. higher than those of East Japan.This study suggests that the primary magmas that formed the island arc volcanic rocks are initially depleted in sulfur (<120 ppm) and enriched in ³⁴S ($\text{δ}{}^{34}\text{S: +5 ～ +7}$) compared to ocean-floor tholeiitic basalts which formed at mantle under oceanic region. This indicates that the upper-mantle is heterogeneous in sulfur content and isotope composition.  相似文献