Sorption of Ni on Na-rectorite studied by batch and spectroscopy methods     

Xiaoli Tan  Changlun Chen  Shaoming Yu  Xiangke Wang 《Applied Geochemistry》2008

Sorption of Ni²⁺ on Na-rectorite as a function of contact time, temperature, pH and fulvic acid (FA)/humic acid (HA) was studied under ambient conditions. A pseudo-second-order rate equation was used to simulate the kinetic sorption. The removal of Ni²⁺ increased with increasing pH. The presence of FA/HA enhanced the sorption of Ni²⁺ at low pH values, whereas no drastic effect of FA/HA on Ni²⁺ uptake to rectorite was found at high pH values. The diffuse layer model (DLM) fitted the experimental data of Ni²⁺ sorption in the absence and presence of FA/HA very well with the aid of FITEQL 3.2. The Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models were used to simulate the sorption isotherms of Ni²⁺ at different temperatures. The thermodynamic data (ΔH⁰, ΔS⁰, ΔG⁰) were calculated from the temperature dependent sorption isotherms and the results suggested that the sorption process of Ni²⁺ on rectorite was spontaneous and endothermic. The sorption and species of Ni²⁺ on rectorite in the presence and absence of FA/HA was also investigated and characterized by XPS. The spectroscopic analysis indicated no drastic structural changes of Na-rectorite and the sorption of Ni²⁺ mainly occurred on the surface and at the edge position of Na-rectorite.  相似文献   

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method   总被引：2，自引：0，他引：2  

S.‐H. Chen  X.‐M. Feng  S. Isam 《国际地质力学数值与分析法杂志》2008,32(12):1459-1477

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

Biogeochemical characteristics of the Hetai goldfield, Guangdong Province, China     

Li Miao  Ruisong Xu  Yueliang Ma  Jinhong Xu  Jie Wang  Rui Cai  Yu Chen   《Journal of Geochemical Exploration》2008,96(1):43-52

In the Hetai goldfield, Guangdong Province, China, samples including rocks, soils and leaves of four plants (Pinus massoniana, Rhodomyrms tomenlosa, D. linearis var. dichotoma and Embelia laeta) collected from the gold mineralization zone and the background area were analyzed for Au, Ag, Cu, Pb, Zn, Hg, As and physiological parameters. The objective of this investigation is to study the geochemical and biogeochemical characteristics of studied plants, aiming at biogeochemical methods in Au exploration. The goldfield region shows geochemical and biogeochemical anomalies. Abundances of Au in rocks, soils, plants and the leaf pigments in the mineralized area are much higher than those in the surrounding region. The plants display unhealthy physiological and ecological characteristics in the Hetai goldfield area. The cell structures of the goldfield plants were anomalous and aberrant, and there were many nano-metal particles diffused in mitochondria and chloroplasts. Macro- and microscopic evidences of the vegetation in the goldfield areas are distinctly different from the background regions. The strongly anomalies in responses to Au are profound in further geochemical and botanic exploration studies.  相似文献   

利用MC-ICPMS对水样中硼同位素比值的测定   总被引：2，自引：0，他引：2  

吕苑苑  许荣华  赵平  谢烈文  李禾 《地球化学》2008,37(1):1-8

采用Amberlite IRA-743硼特效树脂进行水溶液中硼的分离,对洗脱液温度、体积以及树脂动态交换容量等进行了实验.它的动态交换容量为4.2 mg/g,在室温条件下,用5 mL 2%HNO3可定量从树脂柱上洗脱被吸附的硼.采用Neptune型MC-ICPMS进行硼同位素组成的测定,1 μg/g浓度的硼标准溶液获得放大的信号强度约为0.7V,硼的化学分离过程有效避免了质量歧视效应.实验结果表明,MC-ICPMS对硼存在严重的记忆效应,通过采用5%HNO3-(1%HNO3 0.1%HF)-H2O-20%NH3H2O-H2O的交替清洗方法,可在约1 h内消除硼的记忆效应.在最佳仪器条件下,对含有250 ng硼的水样,可以快速测定硼的同位素组成,占δ11B测定的绝对偏差为0.4‰-0.5‰(SD).  相似文献   

华南前寒武系基底变质杂岩和中-新生代地幔岩的稀有气体同位素组成及其大地构造意义          下载免费PDF全文

谢窦克  邢光福  陆志刚  陈荣  周宇章 《地质科学》2008,43(1):175-204

对华南前寒武系变质岩浆杂岩稀有气体He、Ne、Ar和Xe的系统研究表明:扬子克拉通基底为含高³He的下地壳"原始岩石层",(³He/⁴He)×10^-6比值为2.8～4.6;而华夏板块基底变质岩浆杂岩则是在缺乏³He、低(³He/⁴He)×10^-8比值(3.15～17.7)的构造环境下形成的大陆中-上地壳变质岩浆杂岩层,反映出两者基底性质迥然不同。华南中-新生代爆破岩筒He同位素组成相反,相对稳定的扬子克拉通(³He/⁴He)×10^-8比值仅0.18～4.22,而郯庐-四会-吴川断裂以东,中-新生代活动地块(太平洋构造域)(³He/⁴He)×10^-8比值高达3.7～20.5。He同位素表明郯庐-四会-吴川断裂带为切割深至地幔的边界深大断裂,是扬子克拉通与华夏板块间的边界且控制了燕山期火山-侵入岩浆向西扩展。Ar同位素组成表明华南大陆中-新生代地幔形成接近"均一"的地幔组份。¹³⁶Xe/¹³⁰Xe-¹²⁹Xe/¹³⁰Xe相关组份表明它们具有地幔柱岩石同位素组成特征。  相似文献   

东营凹陷北部沙河街组四段深部储层多重成岩环境及演化模式   总被引：7，自引：0，他引：7       下载免费PDF全文

张善文  袁静  隋风贵  陈鑫 《地质科学》2008,43(3):576

主要通过薄片鉴定、扫描电镜观察、包裹体分析、粘土矿物分析、镜质体反射率测试和岩心物性分析等手段,结合构造发育史和有机质热演化史等研究成果,以揭示东营凹陷北带古近系深部碎屑岩储层成岩环境及演化模式为目的展开研究工作。结果表明:东营凹陷北带古近系深部碎屑岩储层存在酸性、碱性和酸性碱性交替等多重成岩环境。酸性成岩环境以碳酸盐矿物溶解、长石溶解蚀变为高岭石并伴生石英次生加大等为标志,碱性成岩环境以石英质颗粒及其次生加大边溶解、长石次生加大和晚期碳酸盐矿物沉淀为标志。研究区古近系深部碎屑岩储层成岩环境由浅至深大致经历了碱性—酸性—酸性碱性交替(局部碱性较强)—碱性—弱碱性的演化过程,并建立了沙河街组四段的成岩演化和储层改造模式。  相似文献   

喜马拉雅山脉的地质地貌特征:来自SRTM数字高程模型和降水量数据的约束   总被引：3，自引：1，他引：2       下载免费PDF全文

王猛  刘焰  何延波  魏东 《地质科学》2008,43(3):603-622

利用GTOPO30和SRTM3数字高程(DEM)数据,提取了喜马拉雅山脉(造山带)的数字高程模型并对其进行了地质地貌的初步分析。从SRTM3数字高程数据提取出坡度数据,初步分析了喜马拉雅山脉坡度和高程的特征。数字高程和坡度图清楚地展现了喜马拉雅大型断裂带(构造边界)的空间分布特征。分析了中国气象局下属的西藏、青海、四川和云南4省区气象观测台站55年来的年平均降水量观测数据、喜马拉雅山脉南坡的年平均降水量数据、喜马拉雅DEM和裂变径迹数据,发现喜马拉雅山脉从东至西,年平均降水量逐渐减少,地形起伏逐渐变小,而高程渐次升高,与此同时剥蚀速率降低;从北至南,年平均降水量逐渐增加,地形起伏增大,高程快速降低,而剥蚀速率则急剧升高。这充分说明了喜马拉雅年平均降水量大的地区,地表剥蚀作用相对较强,年平均降水量小的地区,地表剥蚀作用则较弱,即:在喜马拉雅地区,长周期的地表剥蚀过程(可长达数个百万年时间尺度)和短周期(仅仅50年)的降水量观测是耦合的。  相似文献   

Wenchuan Earthquake： Way of thinking is changed   总被引：9，自引：0，他引：9  

Yong Chen Li Li Juan Li Gang Li 《《幕》》2008,31(4):374-377

On 12 May, 2008, at 14：28：04 local time, an Ms 8.0 earthquake struck the Wenchuan County, Sichuan Province, in southwest China （Figure 1）. This quake left about 70,000 people dead, 18,000 missing and over 370,000 injured. In the 75 days after the main shock, 20,000 aftershocks were recorded, which included 241 with Ms≥4.0, 205 with 4.0≤M≤4.9, 30 with 5.0≤Ms≤5.9, and 6 with Ms≥6.0. The largest aftershock took place 13 days after the main shock, in Qingchuan County, 110 km northeast of the epicenter of the quake （Chen, 2008）. The losses from the quaketriggered geological disasters accounted for over a third of the total quake losses, which is extremely rare in the history of earthquake disasters. Secondary disasters, such as landslides, rockslides, landfalls, debris flows, etc., were widely distributed. Large numbers of buildings collapsed, including ones with steel reinforcing in the area of the epicenter. Infrastructure was badly damaged. In many areas, communications, and power and water supplies were cut off. The earthquake left over 35 large quake-dammed lakes, which threatened further disasters in the catchment areas.  相似文献   

High‐pressure metamorphism in Taiwan: from oceanic subduction to arc‐continent collision?     

O. Beyssac  F. Negro  M. Simoes  Y. C. Chan  Y. G. Chen 《地学学报》2008,20(2):118-125

Abstract The Taiwan orogen has been the focus of a number of models of mountain building processes, but little attention has been paid to high‐pressure (HP) metamorphic rocks that are found as exotic blocks intermingled within the deepest units of the mountain belt. In this study, we re‐appraise from updated petrological and thermodynamic databases the physical conditions of HP metamorphism in Taiwan, and we combine our findings with available geochronological data to estimate the thermal history of these rocks. Our results indicate that peak metamorphic conditions of ～550 °C and 10–12 kbar have been followed by a rapid isothermal decompression, with exhumation possibly as rapid as burial. These units have subsequently been stored at a pressure of ～3 kbar for ～4–5 Myr, before their final exhumation, probably facilitated by the accretion of passive margin sequences during the Late Cenozoic collision. Therefore, HP units in Taiwan maintain a record of processes at depth from the early stages of oceanic subduction to the present arc‐continent collision.  相似文献   

华北克拉通北缘隆化地区S型花岗岩的独居石年龄图谱   总被引：1，自引：0，他引：1  

凤永刚  刘树文  吕勇军  张臣  舒桂明  王长秋 《岩石学报》2008,24(1):104-114

位于华北克拉通北缘中段的隆化S型花岗岩由石榴石黑云母花岗岩、石榴石花岗岩以及片麻理化的黑云母花岗岩组成。其主体岩性石榴石黑云母花岗岩SiO_2和Al_2O_3含量分别为64.09%～69.6%以及14.6%～16.13%,K_2O/Na_2O>1.0,A/CNK>1,0,Mg~#在20.76～34.89之间变化,具有明显的Nb、Ta、P、Ti和Sr亏损以及Rb、K和Th富集。石榴石黑云母花岗岩(样品JB6031-1)采用独居石电子探针U-Th-Pb化学法进行测年,获得了2553±120Ma、2180±42Ma和1854±24Ma三个年龄峰值。一颗独居石内部成分分带上6个分析点定年结果构成2553±120Ma的峰值年龄,这一年龄与我们最新获得的2506±7Ma和2541±8Ma(继承锆石年龄)LA-ICP-MS锆石U-Pb同位素年龄相似,我们将这一独居石年龄解释为继承独居石的年龄,表明在赤城-隆化断裂以北存在太古宙陆块,并且在后期构造-热事件中发生部分熔融形成S型花岗岩。该独居石颗粒幔部成分分带上10个分析点的测年结果揭示的峰值年龄为2181±42Ma,该年龄也是出现频率最高的年龄值,我们建议2181±42Ma为S型花岗岩的结晶年龄,反映了S型花岗岩的侵位时代。独居石颗粒外部成分分带上8个分析点的测年结果构成1854±24Ma的峰值年龄,该年龄与华北克拉通中部带的变质年龄接近,我们将其解释为S型花岗岩的变质年龄,表明华北克拉通北缘的构造演化与中部带的构造演化密切相关。  相似文献