排序方式： 共有24条查询结果，搜索用时 15 毫秒
11.
Sakir Sahin Xueyang Bao Niyazi Turkelli Eric Sandvol Ugur Teoman Metin Kahraman 《Pure and Applied Geophysics》2013,170(3):337-351
We estimate Lg wave attenuation using local and regional seismic phases in the Isparta Angle and the Anatolian Plateau (Turkey). The Isparta Angle (IA) is a tectonically active zone forming the boundary between the African Plate and the Anatolian Plateau, and is currently undergoing N–S extensional deformation. The Anatolian Plateau contains many intra-continental faults including the North Anatolian Fault Zone and the East Anatolian Fault Zone as well as the Menderes Massif. A large waveform data set was compiled from a variety of local and regional seismic networks including 121 digital seismic stations (broad-band and short period) between 1999 and 2008 spanning the IA, the Anatolian Plateau and Azerbaijan. The data set was used to determine the nature of Lg wave propagation and characterize the nature of seismic attenuation within the crust of these regions. Lg waveforms were used to calculate the frequency-dependent Lg-Q o and Lg- $ \eta $ . A wide range of Lg-Q o values was obtained between ~52 ± 6 and 524 ± 227. Low Lg-Q o values (~90–155) are calculated towards the north of IA, Iskenderun Gulf and its vicinity, Bingöl-Karl?ova, Izmit and its vicinity. Lg-Q o values are especially low (<90) along the Menderes Massif and the Aksehir-Simav Fault Zones. This may be due to intrinsic attenuation of Lg associated with the partially molten crust and young volcanism. The high Lg-Q o values (~350) are probably caused by the crust not being subject to large amounts of extensional deformation like the Antalya Gulf and apparently being thick enough to support Lg propagation. Relatively higher values along the border of this subduction zone and plate boundary might be related to the Taurus Mountain belts and Bitlis-Zagros Suture Zone. The lateral frequency dependency Lg- $ \eta $ is also consistent with high tectonic activity in this region. 相似文献
12.
Two‐story, three‐bay reinforced concrete (RC) frames with and without internal steel frame (ISF) retrofits were tested using continuous pseudo dynamic test method. The ISFs were installed to the middle bay of the RC frame. Test results indicated that ISF retrofit was beneficial in resisting deformation demands without significant damage under simulated ground motions. The ISF shifted the failure mode of the system from a brittle to a ductile mode. The test results were compared with the results of the nonlinear time history analysis. The analysis results were capable of tracing the overall behavior of global response parameters; however, estimations of local demand parameters were less accurate. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
13.
An integration of GIS and remote sensing in groundwater investigations: A case study in Burdur, Turkey 总被引：13，自引：4，他引：9
The importance of groundwater is growing based on an increasing need and decreasing spring discharges in the Burdur area. Remote Sensing and the Geographic Information System (GIS) have been used for investigation of springs, which are an important groundwater source. The chemical composition of groundwater is not of drinking water quality in Burdur city and water in the Burdur residential area is being obtained from the Cine plain.The purpose of this study was to investigate new water sources by using remote sensing and GIS methods. Geology, lineament and land use maps of the research area were prepared using the Landsat TM satellite image composed of different analyses on the TM 7–4-1 band. In addition, contours, creeks, roads and springs were digitized using a topographic map of 1/100,000 scale to produce a drainage density map. A groundwater potential map was produced which integrated thematic maps, such as annual rainfall, geology, lineament density, land use, topography, slope and drainage density. According to this investigation, the surrounding villages of Askeriye, Bugduz, Gelincik, Taskap and Kayaalt were determined to be important from the point of view of groundwater potential in the research area. 相似文献
14.
This paper proposes a simple conceptual mathematical model for the mechanical components of the NEES‐UCSD large high‐performance outdoor shaking table and focuses on the identification of the parameters of the model by using an extensive set of experimental data. An identification approach based on the measured hysteresis response is used to determine the fundamental model parameters including the effective horizontal mass, effective horizontal stiffness of the table, and the coefficients of the classical Coulomb friction and viscous damping elements representing the various dissipative forces in the system. The effectiveness of the proposed conceptual model is verified through a comparison of analytical predictions with experimental results for various tests conducted on the system. The resulting mathematical model will be used in future studies to model the mechanical components of the shake table in a comprehensive physics‐based model of the entire mechanical, hydraulic, and electronic system. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
15.
Sakir Bal 《Ocean Engineering》1998,26(4):343-361
A potential based panel method for the hydrodynamic analysis of 2-D hydrofoils moving beneath the free surface with constant speed without considering cavitation is described. By applying Green's theorem and the Green function method, an integral equation for the perturbation velocity potential is obtained under the potential flow theory. Dirichlet type boundary condition is used instead of Neumann type boundary condition. The 2-D hydrofoil is approximated by line panels which have constant source strength and constant doublet strength distributions. The free surface condition is linearized and the method of images is used for satisfying this free surface condition. All the terms in fundamental solution (Green function) of perturbation potential are integrated over a line panel. Pressure distribution, lift, residual drag and free surface deformations are calculated for NACA4412, symmetric Joukowski and van de Vooren profile types of hydrofoil. The results of this method show good agreement with both experimental and numerical methods in the literature for the NACA4412 and symmetric Joukowski profile types. The lift and residual drag values of the van de Vooren profile are also presented. The effect of free surface is examined by a parametric variation of Froude number and depth of submergence. 相似文献
16.
The purpose of this study is to develop the empirical equations for the prediction of the physical and mechanical properties of limestone and marble from microscopic data including their mineralogical and petrographical properties and to test the validity of model equations by using multivariate statistical methods. This study was performed on 15 different rocks, composed of six limestone and nine marble samples. Stepwise multiple regression analysis was applied to predict the engineering properties of both the marble and limestone rock samples considering petrographical properties as inputs. In order to determine the overall significance of the empirical equations for prediction of the physical and mechanical properties of marble and limestone samples, the F test was also performed. As a result of this study, it is found that the empirical equations developed in this study are statistically significant. 相似文献
17.
The Effects of Operational Parameters on a Mono-wire Cutting System: Efficiency in Marble Processing
Mono-wire block cutting machines that cut with a diamond wire can be used for squaring natural stone blocks and the slab-cutting process. The efficient use of these machines reduces operating costs by ensuring less diamond wire wear and longer wire life at high speeds. The high investment costs of these machines will lead to their efficient use and reduce production costs by increasing plant efficiency. Therefore, there is a need to investigate the cutting performance parameters of mono-wire cutting machines in terms of rock properties and operating parameters. This study aims to investigate the effects of the wire rotational speed (peripheral speed) and wire descending speed (cutting speed), which are the operating parameters of a mono-wire cutting machine, on unit wear and unit energy, which are the performance parameters in mono-wire cutting. By using the obtained results, cuttability charts for each natural stone were created on the basis of unit wear and unit energy values, cutting optimizations were performed, and the relationships between some physical and mechanical properties of rocks and the optimum cutting parameters obtained as a result of the optimization were investigated. 相似文献
18.
In this study, non-cavitating and cavitating flow around the benchmark DTMB 4119 model propeller are solved using both viscous and potential based solvers. Cavitating and non-cavitating propeller radiated noises are then predicted by using a hybrid method in which RANS(Reynolds-averaged Navier-Stokes) and FWH(Ffowcs Williams Hawkings) equations are solved together in open water conditions. Sheet cavitation on the propeller blades is modelled by using a VOF(Volume of Fiuld) method equipped with Schnerr-Sauer cavitation model.Nevertheless, tip vortex cavitation noise is estimated by using two different semi-empirical techniques, namely Tip Vortex Index(TVI, based on potential flow theory) and Tip Vortex Contribution(TVC). As the reference distance between noise source and receiver is not defined in open water case for TVI technique, one of the outputs of this study is to propose a reference distance for TVI technique by coupling two semi-empirical techniques and ITTC distance normalization. At the defined distance, the starting point of the tip vortex cavitation is determined for different advance ratios and cavitation numbers using potential flow solver. Also, it is examined that whether the hybrid method and potential flow solver give the same noise results at the inception point of tip vortex cavitation.Results show that TVI method based on potential flow theory is reliable and can practically be used to replace the hybrid method(RANS with FWH approach) when tip vortex cavitation starts. 相似文献
19.
The western part of Anatolia is one of the most seismically and tectonically active continental regions in the world, and
much of it has been undergoing NS-directed extensional deformation since the Early Miocene. In this study, we determine 3-D
tomographic images of the crust under the southwestern part of the North Anatolian Fault Zone by inverting a large number
of arrival time data of P and S waves. From the obtained P- and S-wave velocity models, we estimated the Poisson’s ratio structures for a more reliable interpretation of the obtained anomalies.
Our tomographic results confirmed the major tectonic features detected by previous studies and revealed new structural heterogeneities
related to the active seismotectonics of the studied area. High P-wave velocity anomalies are recognized near the surface, while at deeper crustal layers, low P-wave velocities are widely distributed. The crustal S-wave velocity and Poisson’s ratio exhibit more structural heterogeneities compared to the P-wave velocity structure. Microearthquake activity is intense along highly heterogeneous zones in the southwestern part, which
is characterized by low to high P-wave velocity, low S-wave velocity, and high Poisson’s ratio anomalies. Large earthquakes are also concentrated in zones dominated by low velocities
and low to high Poisson’s ratios. Results of the checkerboard and synthetic tests indicate that the imaged anomalies are reliable
features down to a depth of 25 km. Moreover, they are consistent with many geological and geophysical results obtained by
other researchers along the southwestern part of the North Anatolian Fault Zone.
An erratum to this article can be found at 相似文献
20.