High-pressure phase behavior of MnTiO<Subscript>3</Subscript>: decomposition of perovskite into MnO and MnTi<Subscript>2</Subscript>O<Subscript>5</Subscript>     

Taku Okada  Takehiko Yagi  Daisuke Nishio-Hamane 《Physics and Chemistry of Minerals》2011,38(4):251-258

The phase relations and compression behavior of MnTiO₃ perovskite were examined using a laser-heated diamond-anvil cell, X-ray diffraction, and analytical transmission electron microscopy. The results show that MnTiO₃ perovskite becomes unstable and decomposes into MnO and orthorhombic MnTi₂O₅ phases at above 38 GPa and high temperature. This is the first example of ABO₃ perovskite decomposing into AO + AB₂O₅ phases at high pressure. The compression behavior of volume, axes, and the tilting angle of TiO₆ octahedron of MnTiO₃ perovskite are consistent with those of other A²⁺B⁴⁺O₃ perovskites, although no such decomposition was observed in other perovskites. FeTiO₃ is also known to decompose into two phases, instead of transforming into the CaIrO₃-type post-perovskite phase and we argue that one of the reasons for the peculiar behavior of titanate is the weak covalency of the Ti–O chemical bonds.  相似文献   

Deformation-induced polymorphic transformation: experimental deformation of kyanite, andalusite, and sillimanite   总被引：1，自引：0，他引：1  

Eric T. Goergen  Donna L. Whitney  Mark E. Zimmerman  Takehiko Hiraga 《Tectonophysics》2008,454(1-4):23-35

Torsion experiments were performed on the Al₂SiO₅ polymorphs in the sillimanite stability field to determine basic rheological characteristics and the effect of deformation on polymorphic transformation. The experiments resulted in extensive transformation of andalusite and kyanite to sillimanite. No transformation occurred during the hot-press (no deformation) stage of sample preparation, which was carried out at similar P–T conditions and duration as the torsion experiments. Experiments were conducted on fine-grained (< 15 µm) aggregates of natural andalusite, kyanite and sillimanite at 1250 °C, 300 MPa, and a constant shear strain rate of 2 × 10^− 4/s to a maximum shear strain of 400%. Electron back-scattered diffraction (EBSD) analysis of the experiments revealed development of lattice-preferred orientations, with alignment of sillimanite and andalusite [001] slightly oblique to the shear plane. The kyanite experiment could not be analyzed using EBSD because of near complete transformation to sillimanite. Very little strain ( 30%) is required to produce widespread transformation in kyanite and andalusite. Polymorphic transformation in andalusite and kyanite experiments occurred primarily along 500 µm wide shear bands oriented slightly oblique and antithetic to the shear plane and dominated by sub-µm (100–150 nm) fibrolitic sillimanite. Shear bands are observed across the entire strain field preserved in the torsion samples. Scanning transmission electron microscope imaging shows evidence for transformation away from shear bands; e.g. fibrolitic rims on relict andalusite or kyanite. Relict grains typically have an asymmetry that is consistent with shear direction. These experimental results show that sillimanite is by far the weakest of the polymorphs, but no distinction can yet be made on the relative strengths of kyanite and andalusite. These observations also suggest that attaining high bulk strain energy in strong materials such as the Al₂SiO₅ polymorphs is not necessary for triggering transformation. Strain energy is concentrated along grain boundaries, and transformation occurs by a dynamic recrystallization type process. These experiments also illustrate the importance of grain-size sensitive creep at high strains in a system with simultaneous reaction and deformation.  相似文献   

Implementation of integrated multi-channel analysis of surface waves and waveform inversion techniques for seismic hazard estimation     

Abd el-aziz Khairy Abd el-aal  Yuji Yagi  Heba Kamal  kamal Abdelrahman 《Arabian Journal of Geosciences》2016,9(4):322

In this study, an integrated multi-channel analysis of Surface Waves (MASW) technique is applied to explore the geotechnical parameters of subsurface layers at the Zafarana wind farm. Moreover, a seismic hazard procedure based on the extended deterministic technique is used to estimate the seismic hazard load for the investigated area. The study area includes many active fault systems along the Gulf of Suez that cause many moderate and large earthquakes. Overall, the seismic activity of the area has recently become better understood following the use of new waveform inversion method and software to develop accurate focal mechanism solutions for recent recorded earthquakes around the studied area. These earthquakes resulted in major stress-drops in the Eastern desert and the Gulf of Suez area. These findings have helped to reshape the understanding of the seismotectonic environment of the Gulf of Suez area, which is a perplexing tectonic domain. Based on the collected new information and data, this study uses an extended deterministic approach to re-examine the seismic hazard for the Gulf of Suez region, particularly the wind turbine towers at Zafarana Wind Farm and its vicinity. Alternate seismic source and magnitude-frequency relationships were combined with various indigenous attenuation relationships, adapted within a logic tree formulation, to quantify and project the regional exposure on a set of hazard maps. We select two desired exceedance probabilities (10 and 20 %) that any of the applied scenarios may exceed the largest median ground acceleration. The ground motion was calculated at 50th, 84th percentile levels for both selected probabilities of exceeding the median.  相似文献   

The Cretaceous Ofuku Pluton and Its Relation to Mineralization in the Western Akiyoshi Plateau,Yamaguchi Prefecture,Japan          下载免费PDF全文

Yuka Sasaki  Teruyoshi Imaoka  Mariko Nagashima  Kazuo Nakashima  Takafumi Sonehara  Koshi Yagi  Tetsumaru Itaya 《Resource Geology》2016,66(2):85-113

The relationship between the magmatism of the Cretaceous Ofuku pluton and mineralization in and around the Akiyoshi Plateau, Yamaguchi Prefecture, Japan was investigated using a combination of field observation, petrographic and geochemical analyses, K–Ar geochronology, and fluid inclusion data. The Ofuku pluton has a surface area of 1.5 × 1.0 km, and was intruded into the Paleozoic accretionary complexes of the Akiyoshi Limestone, Ota Group and Tsunemori Formation in the western part of the Akiyoshi Plateau. The pluton belongs to the ilmenite‐series and is zoned, consisting mainly of early tonalite and granodiorite that share a gradational contact, and later granite and aplite that intruded the tonalite and granodiorite. Harker diagrams show that the Ofuku pluton has intermediate to silicic compositions ranging from 60.4 to 77.9 wt.% SiO₂, but a compositional gap exists between 70.5 to 73.4 wt.% SiO₂ (anhydrous basis). Modal and chemical variations indicate that the assumed parental magma is tonalitic. Quantitative models of fractional crystallization based on mass balance calculations and the Rayleigh fractionation model using major and trace element data for all crystalline phases indicate that magmatic fractionation was controlled mainly by crystal fractionation of plagioclase, hornblende, clinopyroxene and orthopyroxene at the early stage, and quartz, plagioclase, biotite, hornblende, apatite, ilmenite and zircon at the later stage. The residual melt extracted from the granodiorite mush was subsequently intruded into the northern and western parts of the Ofuku pluton as melt lens to form the granite and aplite. The age of the pluton was estimated at 99–97 Ma and 101–98 Ma based on K–Ar dating of hornblende and biotite, respectively. Both ages are consistent within analytical error, indicating that the Ofuku pluton and the associated Yamato mine belong to the Tungsten Province of the San‐yo Belt, which is genetically related to the ilmenite‐series granitoids of the Kanmon to Shunan stages. The aplite contains Cl‐rich apatite and REE‐rich monazite‐(Ce), allanite‐(Ce), xenotime and bastnäsite‐(Ce), indicating that the residual melt was rich in halogens and REEs. The tonalite–granodiorite of the Ofuku pluton contains many three‐phase fluid inclusions, along with daughter minerals such as NaCl and KCl, and vapor/liquid (V/L) volume ratios range from 0.2 to 0.9, suggesting that the fluid was boiling. In contrast, the granite and aplite contain low salinity two‐phase inclusions with low V/L ratios. The granodiorite occupies a large part of the pluton, and the inclusions with various V/L ratios with chloride daughter minerals suggest the boiling fluids might be related to the mineralization. This fluid could have carried base metals such as Cu and Zn, forming Cu ore deposits in and around the Ofuku pluton. The occurrence and composition of fluid inclusions in the igneous rocks from the Akiyoshi Plateau are directly linked to Cu mineralization in the area, demonstrating that fluid inclusions are useful indicators of mineralization.  相似文献   

Unquenchable high-pressure perovskite polymorphs of MnSnO3 and FeTiO3     

Kurt Leinenweber  Wataru Utsumi  Yoshihiko Tsuchida  Takehiko Yagi  Kei Kurita 《Physics and Chemistry of Minerals》1991,18(4):244-250

New high-pressure orthorhombic (GdFeO₃-type) perovskite polymorphs of MnSnO₃ and FeTiO₃ have been observed using in situ powder X-ray diffraction in a diamond-anvil cell with synchrotron radiation. The materials are produced by the compression of the lithium niobate polymorphs of MnSnO₃ and FeTiO₃ at room temperature. The lithium niobate to perovskite transition occurs reversibly at 7 GPa in MnSnO₃, with a volume change of -1.5%, and at 16 GPa in FeTiO₃, with a volume change of -2.8%. Both transitions show hysteresis at room temperature. For MnSnO₃ perovskite at 7.35 (8) GPa, the orthorhombic cell parameters are a=5.301 (2) A, b=5.445 (2) Å, c=7.690 (8) Å and V= 221.99 (15) ų. Volume compression data were collected between 7 and 20 GPa. The bulk modulus calculated from the compression data is 257 (18) GPa in this pressure region. For FeTiO₃ perovskite at 18.0 (5) GPa, cell parameters are a=5.022 (6) Å, b=5.169 (5) Å, c=7.239 (9) Å and V= 187.94 (36) ų. Based on published data on the quench phases, the FeTiO₃ perovskite breaks down to a rocksalt + baddelyite mixture of FeO and TiO₂ at 23 GPa. This is the first experimental verification of the pressure-induced breakdown of a perovskite to simple oxides.  相似文献   

Further evaluation of the Sim-ReSET model for ET estimation driven by only satellite inputs     

Zhigang Sun  Qinxue Wang  Bunkei Matsushita  Takehiko Fukushima  Zhu Ouyang  Masataka Watanabe 《水文科学杂志》2013,58(5):994-1012

Abstract

A simple remote sensing evapotranspiration (ET) model (Sim-ReSET) has been proposed but only tested using field measurements at a site with a semi-arid climate. Its performance for mapping ET using only satellite data remained unknown. In this study, the Sim-ReSET model was further evaluated for ET estimation driven by only MODIS data products. The estimated ET rates were compared with ground-based observational data from a variety of ecosystems and climates across China. The results show that MODIS-based ET estimates are consistent with both the ET measurements from eddy covariance flux towers and those from the Penman-Monteith method combined with micrometeorological data. Evaporation fraction (EF) is indicative of land surface moisture. The derivative EF maps demonstrate that the proposed ET data set obtained from the Sim-ReSET model and MODIS data is capable of capturing the spatio-temporal pattern of land surface moisture for different land covers with different climates.

Editor Z.W. Kundzewicz

Citation Sun, Z.G., Wang, Q.X., Matsushita, B., Fukushima, T., Ouyang, Z., Watanabe, M., and Gebremichael, M., 2013. Further evaluation of the Sim-ReSET model for ET estimation driven by only satellite inputs. Hydrological Sciences Journal, 58 (5), 994–1012.  相似文献   

The H i content of star-forming galaxies at z= 0.24     

Philip Lah  Jayaram N. Chengalur  Frank H. Briggs  Matthew Colless  Roberto De Propris  Michael B. Pracy  W. J. G. de Blok  Shinobu S. Fujita  Masaru Ajiki  Yasuhiro Shioya  Tohru Nagao  Takashi Murayama  Yoshiaki Taniguchi  Masafumi Yagi  Sadanori Okamura 《Monthly notices of the Royal Astronomical Society》2007,376(3):1357-1366

  相似文献   

Response of plant growth to surface water balance during a summer dry period in the Kazakhstan steppe     

Yoshihiro Iijima  Tsuneo Kawaragi  Takehiko Ito  Kanat Akshalov  Atsushi Tsunekawa  Masato Shinoda 《水文研究》2008,22(16):2974-2981

In drylands, water deficit is the primary factor limiting plant growth. In the present study, surface energy balance and plant growth (above‐ground and below‐ground biomass) were measured continuously during the 2002 growing season in semiarid grassland in the northern part of Kazakhstan, Central Asia. Although there was above normal total rainfall during the 2002 growing season (May–November; 244 mm over 183 days), there was a dry period during July and August. Evaporative water was effectively supplied by precipitation and surface soil moisture during the wet season (May and June), during which time above‐ground biomass increased. During the early stages of the dry period, mature plants were likely to tap deeper sources of soil moisture, representing stored snowmelt water. As the soil moisture content decreased during the summer dry period due to the high levels of evapotranspiration and lack of precipitation, the evaporative fraction and above‐ground biomass rapidly decreased, whereas the below‐ground biomass increased. These results suggest that in summer, soil moisture acts to store water, and that soil moisture is essential for plant growth as a direct source of water during the dry period in natural grasslands in the Kazakhstan steppe. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

Crossing new frontiers: extending tephrochronology as a global geoscientific research tool     

Peter M. Abbott  Britta J. L. Jensen  David J. Lowe  Takehiko Suzuki  Daniel Veres 《第四纪科学杂志》2020,35(1-2):1-8

  相似文献   

Evidence for erosion and deposition by the 2011 Tohoku-oki tsunami on the nearshore shelf of Sendai Bay,Japan     

Shuro?YoshikawaEmail author  Toshiya?Kanamatsu  Kazuhisa?Goto  Izumi?Sakamoto  Masatoshi?Yagi  Mikio?Fujimaki  Riichirou?Imura  Kenji?Nemoto  Hide?Sakaguchi 《Geo-Marine Letters》2015,35(4):315-328

Ongoing geological research into processes operating on the nearshore continental shelf and beyond is vital to our understanding of modern tsunami-generated sediment transport and deposition. This paper investigates the southern part of Sendai Bay, Japan, by means of high-resolution seismic surveys, vibracoring, bathymetric data assimilation, and radioisotope analysis of a core. For the first time, it was possible to identify an erosional surface in the shallow subsurface, formed by both seafloor erosion and associated offshore-directed sediment transport caused by the 2011 Tohoku-oki tsunami. The area of erosion and deposition extends at least 1,100 m offshore from the shoreline down to water depths of 16.7 m. The tsunami-generated sedimentological signature reaches up to 1.2 m below the present seafloor, whereas bathymetric changes due to storm-related reworking over a period of 3 years following the tsunami event have been limited to the upper ~0.3 m, despite the fact that the study area is located on an open shelf facing the Pacific Ocean. Tsunami-generated erosion surfaces may thus be preserved for extended periods of time, and may even enter the rock record, because the depth of tsunami erosion can exceed the depth of storm erosion. This finding is also important for interpretation of modern submarine strata, since erosion surfaces in shallow (depths less than ~1 m) seismic records from open coast shelves have generally been interpreted as storm-generated surfaces or transgressive ravinement surfaces.  相似文献