The effective failure modes and stability of slopes in rock mass with two discontinuity sets   总被引：3，自引：5，他引：3  

Ö. Aydan  Y. Shimizu  Y. Ichikawa 《Rock Mechanics and Rock Engineering》1989,22(3):163-188

Summary The stability of rock slopes in discontinuous rock mass associated with the construction of power plants, highways and open pits is always of paramount importance during the lifetime of these structures. The likely forms of instabilities observed in the excavation of rock slopes and some mathematical methods for the stability analyses are well documented in literature. Since most of the mathematical approaches used are based on the limiting-equilibrium concept, there seems a need to check the validity of these approaches under some controlled conditions. In this paper, the authors describe methods for the stability of a blocky column and discontinuous rock slopes derived on the basis of dynamic equilibrium equations and compare the results calculated according to the developed method with those of experiments on model blocky columns and model slopes in the laboratory. Test results confirm that the limiting equilibrium approache is valid and an effective way of dealing with the stability problems in discontinuous rock mass as long as the likely forms of instability are properly treated in these approaches.  相似文献   

Metamorphism of the Izu-Tanzawa collision zone     

Mitsuhiro Toriumi  Toru Arai 《Tectonophysics》1989,160(1-4):293-303

The difference in pressure condition of progressive metamorphism established by Schreinemakers' analysis of mineral assemblages in metabasalts makes it possible for the low grade metamorphism of the Izu-Tanzawa-Fujigawadani collision zone to be divided into three types. Type I is characterized by prehnite + epidote + hematite, suggesting the lowest pressure type; whereas type II is defined by prehnite + epidote + actinolite—the intermediate pressure type, and finally the distinctive assemblage of type III is pumpellyite + epidote + actinolite—the higher pressure type. The pressure conditions estimated are about 1 kbar for type I, 1–2 kbar for type II and 2–3 kbar for type III. The metamorphic rocks of type III occur in the southwestern part of the Tanzawa Mountains, and the metamorphic rocks of type I occur in the central Izu Peninsula and the northeast Tanzawa Mountains. Therefore, the upward displacement of the accretion mass due to collision deformation is most significant at the southwest Tanzawa Mountains. This suggests that the accretion of the Tanzawa and Izu blocks is accompanied with large-scale tilting of the mass.  相似文献   

Wind fluctuations near a cold vortex-tropopause funnel system observed by the MU radar     

Shoichiro Fukao  Manabu D. Yamanaka  Hiromasa Matsumoto  Toru Sato  Toshitaka Tsuda  Susumu Kato 《Pure and Applied Geophysics》1989,130(2-3):463-479

Vertical and temporal variations of three-dimensional wind velocity associated with an upper-tropospheric cold vortex-tropopause funnel system were observed by an MST radar in Japan (the MU radar). Marked changes of vertical velocity and horizontal wind direction were found between the inside and outside of the cold vortex. The vertical velocity activity outside the vortex was asymmetric; it was most active in a sector before the vortex. Unsaturated internal gravity waves in their generation stage contribute predominantly to the vertical velocity activity, suggesting that tropospheric occluded cyclones may be a possible source of middle-atmospheric gravity waves through the geostrophic adjustment process.  相似文献   

Internal gravity wave selection in the upper troposphere and lower stratosphere observed by the MU radar: Preliminary results     

Manabu D. Yamanaka  Shoichiro Fukao  Hiromasa Matsumoto  Toru Sato  Toshitaka Tsuda  Susumu Kato 《Pure and Applied Geophysics》1989,130(2-3):481-495

Marked wavelike variations of the lower stratospheric wind observed on 7–10 May, 1985 by an MST radar in Japan (by the MU radar) are analyzed assuming that they are induced by monochromatic internal inertio-gravity waves. These variations are mainly composed of two modes (periods: 22 and 24 hours), both of which have zonal phase velocities (C _X ) slower than the mean westerly wind (). A statistical analysis of the zonal phase velocity shows thatC _X above andC _X below the tropopause jet stream, which is considered to be a vivid proof of wave selection due to the tropospheric mean flow and upward wave emission from the tropopause jet. A comparison between the MU radar results and routine meteorological observations leads to the conclusion that the marked waves appear when the jet stream takes a maximum wind speed.  相似文献   

Diffusivity of oxygen in jadeite and diopside melts at high pressures     

N. Shimizu  I. Kushiro 《Geochimica et cosmochimica acta》1984,48(6):1295-1303

The diffusivity of oxygen was determined in melts of Jadeite (NaAlSi₂O₆) and diopside (CaMgSi₂O₆) compositions using diffusion couples with ¹⁸O as a tracer. In the Jadeite melt, the diffusivity of oxygen increases from $\text{6.87}{}_{\mathrm{?0.25}}{}^{\mathrm{+0.28}}\text{× 10}{}^{\mathrm{?10}}\text{cm}{}^2\text{/}\text{sec}$ at 5 Kb to $\text{1.32 ± 0.08 × 10}{}^{\mathrm{?9}}\text{cm}{}^2\text{/}\text{sec}$ at 20 Kb at constant temperature (1400°C), whereas in the diopside melt at 1650°C, the diffusivity decreases from $\text{7.30}{}_{\mathrm{?0.18}}{}^{0.29}\text{× 10}{}^{\mathrm{?7}}\text{cm}{}^2\text{/}\text{sec}$ at 10 Kb to $\text{5.28}{}_{\mathrm{?0.55}}{}^{\mathrm{+0.60}}\text{× 10}{}^{\mathrm{?7}}\text{cm}{}^2\text{/}\text{sec}$ at 17 Kb. These results demonstrate that the diffusivity is inversely correlated with the viscosity of the melt. For the jadeite melt, in particular, the inverse correlation is very well approximated by the Eyring equation using the diameter of oxygen ions as a unit distance of translation, suggesting that the viscous flow is rate-limited by the diffusion of individual oxygen ions. In the diopside melt, the activation volume is slightly greater than the molar volume of oxygen ion, indicating that the individual oxygen ion is the diffusion unit. The negative activation volume obtained for the jadeite melt is interpreted as the volume decrease associated with a diffusive jump of an oxygen ion due to local collapse of the network structure.  相似文献   

Carbon suboxide and the genetic code     

Mikio Shimizu 《Astrophysics and Space Science》1979,62(2):509-513

Carbon suboxide (C₃O₂) polymers formed in the primitive atmosphere would have produced an organic compound soup of high concentration on the Earth. Various vestiges of C₃O₂ are found in the present genetic scheme, which might suggest that the living system had formed from the polymer soup.  相似文献   

Shear Strength Behavior of Two Landfill Clay Liners   总被引：1，自引：0，他引：1  

Jian Wenxing  Masashi Kamon  Toru Inui  Takeshi Katsumi 《中国地质大学学报(英文版)》2002,13(3)

Direct shear tests were conducted to obtain both the shear strength of compacted clay liners (CCLs) specimens and the interface shear strength between compacted clay liner and base soil. These experiments were conducted under the conditions of five different water contents. The experimental results show that shear strength of both CCLs and CCLs/base interface decreases with the increase in the water content of CCLs and base soil. In addition, the considerate concentration of NaCl in leachate has no deteriorating effect on the shear strength of liners. Triaxial shear tests were also conducted on clay liner specimens to obtain total and effective shear strength under a fast compression. The shear strength c‘=100 kPa for sand-bentonite, respectively. These results indicate that the compacted clay-bentonite shows normal consolidation, but that the compacted sand-bentonite exhibits over-consolidation.  相似文献   

Determination of zircon/melt trace element partition coefficients from SIMS analysis of melt inclusions in zircon   总被引：3，自引：0，他引：3  

J.B Thomas  R.J BodnarN Shimizu  A.K Sinha 《Geochimica et cosmochimica acta》2002,66(16):2887-2901

Partition coefficients (^zircon/meltD_M) for rare earth elements (REE) (La, Ce, Nd, Sm, Dy, Er and Yb) and other trace elements (Ba, Rb, B, Sr, Ti, Y and Nb) between zircon and melt have been calculated from secondary ion mass spectrometric (SIMS) analyses of zircon/melt inclusion pairs. The melt inclusion-mineral (MIM) technique shows that D_REE increase in compatibility with increasing atomic number, similar to results of previous studies. However, D_REE determined using the MIM technique are, in general, lower than previously reported values. Calculated D_REE indicate that light REE with atomic numbers less than Sm are incompatible in zircon and become more incompatible with decreasing atomic number. This behavior is in contrast to most previously published results which indicate D > 1 and define a flat partitioning pattern for elements from La through Sm. The partition coefficients for the heavy REE determined using the MIM technique are lower than previously published results by factors of ≈15 to 20 but follow a similar trend. These differences are thought to reflect the effects of mineral and/or glass contaminants in samples from earlier studies which employed bulk analysis techniques.D_REE determined using the MIM technique agree well with values predicted using the equations of Brice (1975), which are based on the size and elasticity of crystallographic sites. The presence of Ce⁴⁺ in the melt results in elevated D_Ce compared to neighboring REE due to the similar valence and size of Ce⁴⁺ and Zr⁴⁺. Predicted ^zircon/meltD values for Ce⁴⁺ and Ce³⁺ indicate that the Ce⁴⁺/Ce³⁺ ratios of the melt ranged from about 10⁻³ to 10⁻². Partition coefficients for other trace elements determined in this study increase in compatibility in the order Ba < Rb < B < Sr < Ti < Y < Nb, with Ba, Rb, B and Sr showing incompatible behavior (D_M < 1.0), and Ti, Y and Nb showing compatible behavior (D_M > 1.0).The effect of partition coefficients on melt evolution during petrogenetic modeling was examined using partition coefficients determined in this study and compared to trends obtained using published partition coefficients. The lower D_REE determined in this study result in smaller REE bulk distribution coefficients, for a given mineral assemblage, compared to those calculated using previously reported values. As an example, fractional crystallization of an assemblage composed of 35% hornblende, 64.5% plagioclase and 0.5% zircon produces a melt that becomes increasingly more enriched in Yb using the D_Yb from this study. Using D_Yb from Fujimaki (1986) results in a melt that becomes progressively depleted in Yb during crystallization.  相似文献   

Late Pleistocene crustal uplift and gravity anomaly in the eastern part of Kyushu, Japan, and its geophysical implications   总被引：1，自引：0，他引：1  

M. Nakada  M. Tahara  H. Shimizu  S. Nagaoka  K. Uehira  S. Suzuki 《Tectonophysics》2002,351(4)

The Miyazaki Plain, eastern part of Kyushu, Japan, is characterized by both significant negative gravity anomalies and aseismic crustal uplifting (1 mm/year) in the Late Pleistocene and Holocene. We examine the relationship between these two phenomena, which may provide important constraints on the interaction between the collision and/or subduction of the Kyushu-Palau Ridge and the forearc. We estimate the mass deficiency below 11-km depth by using the gravity anomalies and P-wave velocity structure of the upper crust. The onset of the load accumulation, 0.5–0.4 Ma, is inferred from the movement of the fluvial terraces considering the tephrochronology. The loading history is assumed to be a linear function of time. We evaluate the crustal rebound by assuming a viscoelastic plate deformation with an underplating load existing at 20- or 30-km depth. The predicted crustal movement for models with a lithospheric (crustal) viscosity of 10²³–10²⁴ Pa s can explain the observed altitudes of the shoreline of the marine terraces formed at the Last Interglacial of about 125 kyr BP and the middle Holocene of 5–6 kyr BP. Although we cannot restrict the origin of the buoyant body, the subduction of the Kyushu-Palau Ridge, remnant arc associated with back-arc opening of the Shikoku Basin, may be related to the buoyancy for the uplifting region examined here. On the other hand, the buoyant body off the Miyazaki Plain probably plays an important role in the interaction between the subducting oceanic slab and the overriding forearc crust. Thus, the observed lateral variation of the interplate coupling on the convergent boundary along the Nankai Trough may be attributed to the existence of the buoyant body.  相似文献   

Neural Network-Based Estimation of Principal Metal Contents in the Hokuroku District,Northern Japan,for Exploring Kuroko-Type Deposits   总被引：7，自引：0，他引：7  

Koike  Katsuaki  Matsuda  Setsuro  Suzuki  Toru  Ohmi  Michito 《Natural Resources Research》2002,11(2):135-156

The Hokuroku district, extending over 40 × 40 km² in northern Japan, is known to be dominated by kuroko-type massive sulfide deposits that have a genetic relation to submarine volcanic activity. The deposits are hosted in a specific stratigraphic zone of Miocene volcanic rocks. Because kuroko-type deposits are under exploration in several countries, it is important to integrate the geologic and geochemical data that have been accumulated in the Hokuroku district to characterize the distribution of deposits and produce a map of mineral potential. Thus, we collected data on multiple chemical components from 1917 rock cores at 143 drillhole sites and concentrated on components with relatively large amounts of data, which are SiO₂, Al₂O₃, and Fe₂O₃ as major elements and Cu, Pb, and Zn as trace elements. Although frequencies of these data can be approximated by normal or lognormal distributions, spatial correlation structures cannot be extracted from the semivariograms of each component nor from the cross-semivariograms between two components of the major or minor elements. To handle such complexity, a spatial method of modeling content distribution, SLANS, is developed by applying a feedforward neural network. The principle of SLANS is to train a network repeatedly to recognize the relation between the data value and the location and lithology of a sample point. One-hundred outputs for each element are obtained by changing the numbers of neurons in a middle layer from 1 to 10 and sample data used for training from 3 to 12, and finally one output is selected based on the estimation precision of the network which is restricted near the target point. After constructing a geologic distribution model from the geological column classified into 25 rock codes, three-dimensional distributions of Cu, Pb, and Zn contents are estimated over the study area. The content models are considered to be valid because high-content zones are located on the known mine sites and the margins of ancient volcanoes or calderas. Some zones are distributed along strikes of major deep-seated fractures in the district.  相似文献