MASNUM-WAM海浪模式集合Kalman滤波同化研究-I.风场扰动对海浪模拟影响   总被引：1，自引：1，他引：0  

孙盟  尹训强  杨永增  吴克俭 《海洋与湖沼》2016,47(6):1091-1100

模式集合样本的代表性和观测信息的可靠性是制约数据同化效果的重要因素,而前者对海浪模式同化的影响尤为显著。由于海浪模式对初始场的敏感性较弱,来自大气的风输入源函数是海浪的重要能量输入,如何合理地对风输入进行扰动,构造海浪的集合模式运行,是实现和改进海浪模式集合Kalman滤波同化的关键问题。为了实现海浪模式集合运行,本文提出了风场的三种集合扰动方案,分别为：纯随机数、随机场和时间滞后的风场扰动方法。本研究利用2014年1月ECMWF全球风场,基于这三种风场扰动方法开展了集合海浪模式的集合运行实验,并统计分析了海浪特征要素（有效波高）和二维波数谱对风场扰动的响应。结果表明,随机场集合扰动方案所构造的风场集合效果最佳,所得海浪模拟结果的集合样本发散度适中,能够较为合理地反映背景误差的统计特征,可用于进一步的集合Kalman滤波海浪数据同化实验。  相似文献   

小入射角下海浪后向散射系数不对称性和各向异性分析验证     

王晓晨  万剑华  张振华  孟俊敏  范陈清 《海洋学报》2016,38(11):43-48

基于北京遥测技术研究所机载波谱仪实测数据以及ECMWF提供的风场数据,分析了不同风速条件下小入射角海浪平均后向散射系数不对称性与各向异性随入射角的变化特性,并对导致这一现象的原因进行了初步分析。结果表明:小入射角下,海浪平均后向散射系数随入射角增大呈现递减趋势并在18°时达到某一稳定值,之后基本维持不变;海浪后向散射系数不对称性与各向异性均随入射角增大呈现递增趋势,同样在18°增大至某一稳定值,之后基本维持不变;低风速条件下,海浪不对称性和各向异性与风速有关,且风速越大不对称性与各向异性越明显。  相似文献   

放养密度对大杂交鲟生长性能的影响及生理应答机制   总被引：1，自引：0，他引：1  

张墨  李吉方  温海深  步艳  倪蒙  任远源  来长青  刘传忠 《海洋科学》2016,40(8):35-41

为探讨放养密度对鱼类生长及生理应答机制的影响规律和作用,作者以大规格大杂交鲟(达氏鳇(Huso dauricus)♀×施氏鲟(Acipenser schrenckii)♂)为实验材料,研究了平均初始体质量约为243 g/尾,放养密度分别为6(SD1组)、9(SD2组)、12(SD3组)、15 kg/m3(SD4组)条件下,不同放养密度处理70 d后的实验鱼生长性能变化及生理应答机制。结果显示,放养密度对大杂交鲟肥满度影响不显著,SD2组鱼类具有最大的特定生长率和生长效率,随着放养密度增加,日增质量显著降低(P0.05),特定生长率和生长效率下降。测定了血液甲状腺素(T4)、三碘甲腺原氨酸(T3)和皮质醇水平变化,发现放养密度能引起大杂交鲟3个血液生理指标发生显著改变;随着养殖时间推移,T3和皮质醇浓度显著升高,T4浓度显著下降(P0.05)。这些结果说明神经内分泌活动的变化引起大杂交鲟血液生理指标变化,进而影响实验鱼生长性能。因此,在该养殖条件下推荐的养殖密度为9 kg/m3。  相似文献   

大洋涌浪耗散研究及模式应用的进展及主要问题     

毕凡  宋金宝 《海洋科学》2016,40(9):128-134

大洋中涌浪普遍存在且对大气-海洋之间的物理过程有较大影响,但目前对涌浪的耗散过程研究尚不充分。总结了关于涌浪传播和耗散的观测事实,着重指出利用遥感数据推进相关研究的可能性;同时分析可能的物理机制,并论述其在海浪模式中的应用及不足。通过梳理大洋涌浪耗散的研究进展,为今后开展涌浪相关研究提供依据。  相似文献   

海洋产业结构与海域承载力的匹配关系探讨——以辽宁省为例          下载免费PDF全文

狄乾斌  王萌  孟雪 《海洋开发与管理》2016,33(4):14-18

海洋产业结构和海域承载力之间存在多种耦合匹配关系,其匹配程度是影响海洋经济健康持续发展的重要因素,而准确地定量化评价这种匹配关系是准确把握海洋产业结构是否失衡的关键环节。文章将海域承载力引入海洋产业结构问题研究中,首先对海洋产业结构水平和海域承载力定量化测算,在此基础上运用基于数列的匹配度计算方法测度辽宁省海域承载状况与海洋产业结构水平的匹配度,探讨海洋产业结构与海域承载力之间的匹配关系。结果表明:辽宁省海域承载力与海洋产业结构水平匹配度数值较高,二者之间存在较匹配的关系。  相似文献   

山东曹县地区土壤地球化学特征          下载免费PDF全文

邱成贵  张桂林  王东平  张斌  毕征峰  张朋朋 《山东国土资源》2016,32(5)

山东省曹县地区土壤地球化学调查是按浅层土壤样品1点/4 km~2,深层土壤样品1点/16 km~2。测试N,P,K,Cu,Zn,B,Mo,Mn,F,As,Hg,Pb,Cr,Cd等14种指标。在统计这些指标的表层、深层土壤地球化学特征参数的基础上,对其与世界、全省同类参数的差异进行了分析,并分析了区内表层、深层土壤元素含量的相关性,认为该区表层土壤元素含量的显著特征是高F而低P,Zn,Mo。大部分元素在表层土壤中的含量继承了土壤母质的成分特征,但N,P,F,Hg等受人为活动和污染源的作用在表层土壤中明显富集。  相似文献   

Testing and modeling of the mechanical behavior of dolomite in the Wudongde hydropower plant     

J. C. Zhang  W. Y. Xu  H. L. Wang  Q. X. Meng 《Geomechanics and Geoengineering》2016,11(4):270-280

In order to understand the mechanical behaviours of the surrounding rocks in the underground caverns of the Wudongde hydropower plant, triaxial tests are performed on a type of dolomite. It is revealed that damage induced by crack development is the main factor controlling the nonlinear plastic deformation and failure behaviour of the dolomite in both pre- and post-peak regimes. Based on this understanding, a coupled elastoplastic damage model is developed for capturing the dolomite’s mechanical behaviours. In the model, the effects of plasticity and damage on rocks is described by introducing plastic hardening and damage softening commonly in the plastic yield surface. Which are both derived from a suitable Helmholtz free energy function. The model is used to simulate the triaxial tests. Comparisons between test results and the numerical modelling show that the developed model is capable of describing the macro mechanical behaviours of the Wudongde dolomite.  相似文献   

A fusion approach of the improved Dubois model and best canopy water retrieval models to retrieve soil moisture through all maize growth stages from Radarsat-2 and Landsat-8 data     

Qingyan Meng  Qiuxia Xie  Chunmei Wang  Jianxin Ma  Yunxiao Sun  Linlin Zhang 《Environmental Earth Sciences》2016,75(20):1377

  相似文献   

Effects of size and strain rate on the mechanical behaviors of rock specimens under uniaxial compression     

Qingbin Meng  Mingwei Zhang  Lijun Han  Hai Pu  Hao Li 《Arabian Journal of Geosciences》2016,9(8):527

Size and strain rate are two key factors that dramatically influence the estimation of rock mechanical behaviors. To better understand the effects of size and strain rate on measured rocks, rock specimens with six different sizes were tested at six different strain rates under uniaxial compression using the MTS 815 Rock Mechanics Test System. Having determined that the size and strain rate significantly affect the peak strain, peak stress, elastic modulus, acoustic emission (AE), and failure pattern of the rock specimens, the relation was established between the strength and the size and strain rate of red sandstone. And the variation was revealed among the size and strain rate, the AE, and the failure pattern. It turned out that the peak stress was negatively correlated with the rock size and was positively correlated with the strain rate. When the length to diameter ratio (L/D) of the rock specimen was less than 2.0, the AE appeared mildly. The AE quantities gradually increased before the peak stress, and then sharply decreased after the peak stress. The failure pattern of the rock specimen was relatively complicated, with a fracture plane appearing along the axial direction. Conical failure type was also presented. When the L/D ratio of the specimen was greater than 2.0, the AE characteristics of red sandstone showed the radical model. There were relatively few AE rings before the peak stress. But the AE rings increased suddenly and dramatically during the peak stress. The rock specimens primarily failed with a single shear plane. Moreover, with an increase in the strain rate, the AE activities were enhanced and the AE quantities increased. When the strain rate of the rock specimen was less than 5.0?×?10^?4/s, the rock specimen failed with a shear or tensile-shear pattern. And when the strain rate was greater than 5.0?×?10^?4/s, the rock specimen tended to fail in a conical pattern.  相似文献   

美国声波钻进规程ASTM D6914/D6914M—16浅析          下载免费PDF全文

韩萌  孙平贺  徐金鉴  曹函  隆威  张绍和  王旭 《探矿工程》2018,45(10):141-146

声波钻进技术具有速度快、岩心保真好、适用地层广等优点,广泛应用于工程勘察、环境调查、浅源地热、基础工程、矿山治理等领域。为了提高声波钻进施工质量和过程控制,美国材料与实验协会于2004年制定了第一部声波钻进规程D6914—04,后经多次修订完善,形成最新声波钻进规程D6914/D6914M—16。本文根据该版规程内容,从技术原理、钻进设备、成孔工艺等方面展开了阐述。当振动器与钻柱谐振频率重叠时,声波钻头受到的能量达到峰值。钻机和取心钻具是声波钻进的核心设备。成孔工艺主要以双管高频振动、低速回转为主,实现多种目的层的原位取心作业。标准相关内容对声波钻进技术在我国的持续推广具有参考意义。  相似文献