Water exchange between Tokyo Bay and the Pacific Ocean during winter     

Tetsuo Yanagi  Hirofumi Hinata 《Ocean Dynamics》2004,54(3-4):452-459

Variability in water-exchange time between Tokyo Bay and the Pacific Ocean during winter is investigated based on the results of intensive field observation from November 2000 to March 2001. Water-exchange time between Tokyo Bay and the Pacific Ocean during winter mainly depends on the strength of northerly monsoon, being about 16 days under the weak monsoon and about 12 days under the strong monsoon. Moreover, it becomes longer by about 1 day in spring tide and shorter in neap tide due to the coupling effect of estuarine circulation and vertical mixing. Water-exchange time also varies depending on the open-ocean condition. When the warm water mass approaches from the Pacific Ocean to the mouth of Tokyo Bay through the eastern channel of Sagami Bay, which connects Tokyo Bay and the Pacific Ocean, water-exchange time becomes longer by about 2 days because the warm water mass is blocked in the surface layer at the bay mouth. On the other hand, when the warm water mass approaches to the mouth of Tokyo Bay through the western channel of Sagami Bay, water-exchange time becomes shorter by about 1 day because the warm water mass intrudes into the middle or lower layers of Tokyo Bay. Such different behavior of warm water mass at the mouth of Tokyo Bay is due to the difference in density of approaching warm water masses, that is, the density of the warm water mass through the eastern channel is smaller than that of the warm water mass through the western channel of Sagami Bay.Responsible Editors: Yens Kappenberg  相似文献   

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia   总被引：3，自引：0，他引：3  

Akira Imai  Satoshi Ohno 《Resource Geology》2005,55(3):239-248

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.  相似文献   

Deep structure of the northeastern Japan arc and its implications for crustal deformation and shallow seismic activity   总被引：7，自引：1，他引：7  

Akira Hasegawa  Junichi Nakajima  Norihito Umino  Satoshi Miura 《Tectonophysics》2005,403(1-4):59-75

Seismic tomography studies in the northeastern Japan arc have revealed the existence of an inclined sheet-like seismic low-velocity and high-attenuation zone in the mantle wedge at depths shallower than about 150 km. This sheet-like low-velocity, high-attenuation zone is oriented sub-parallel to the subducted slab, and is considered to correspond to the upwelling flow portion of the subduction-induced convection. The low-velocity, high-attenuation zone reaches the Moho immediately beneath the volcanic front (or the Ou Backbone Range) running through the middle of the arc nearly parallel to the trench axis, which suggests that the volcanic front is formed by this hot upwelling flow. Aqueous fluids supplied by the subducted slab are probably transported upward through this upwelling flow to reach shallow levels beneath the Backbone Range where they are expelled from solidified magma and migrate further upward. The existence of aqueous fluids may weaken the surrounding crustal rocks, resulting in local contractive deformation and uplift along the Backbone Range under the compressional stress field of the volcanic arc. A strain-rate distribution map generated from GPS data reveals a notable concentration of east–west contraction along the Backbone Range, consistent with this interpretation. Shallow inland earthquakes are also concentrated in the upper crust of this locally large contraction deformation zone. Based on these observations, a simple model is proposed to explain the deformation pattern of the crust and the characteristic shallow seismic activity beneath the northeastern Japan arc.  相似文献   

Different thermal preferences for brooding and larval dispersal of two neighboring shrimps in deep‐sea hydrothermal vent fields          下载免费PDF全文

Hiromi Watanabe  Takuya Yahagi  Yukiko Nagai  MiHye Seo  Shigeaki Kojima  Jun‐ichiro Ishibashi  Hiroyuki Yamamoto  Katsunori Fujikura  Satoshi Mitarai  Takashi Toyofuku 《Marine Ecology》2016,37(6):1282-1289

Temperature is an important factor affecting the distributions and life‐history traits of marine animals. Deep‐sea hydrothermal vents are suitable environments to examine ecologic differences related to temperature, due to the steep temperature gradients around the vents. Rearing experiments under various temperature conditions (5–30 °C) at atmospheric pressure demonstrated a difference in thermal effects on egg hatching and larva in two co‐occurring, vent‐associated alvinocaridid shrimps – the peripherally distributed Alvinocaris longirostris and the centrally distributed Shinkaicaris leurokolos. The duration before hatching became shorter as temperature increased, while the maximum hatching rate occurred at higher temperatures in S. leurokolos (10–20 °C) than in A. longirostris (10 °C). Hatched larvae of both species were negatively buoyant, and larva with normal abdominal length could actively swim and stay suspended in the mid‐ or surface water layers of the culture plates under our experimental conditions. However, no larvae settled or metamorphosed into juveniles under the rearing conditions used in this study. Larvae with shortened abdomens occurred under most of the experimental conditions, although they were less frequent at 10 °C in A. longirostris and 20 °C in S. leurokolos. The maximum survival periods at these temperatures were 88 days in A. longirostris and 30 days in S. leurokolos. These characteristics may cause differences in the distributional ranges of the two species. The present results indicate that temperature is an important factor controlling life‐history traits of vent shrimps.  相似文献   

Field observations of debris-flow initiation processes on sediment deposits in a previous deep-seated landslide site     

Fumitoshi Imaizumi  Satoshi Tsuchiya  Okihiro Ohsaka 《山地科学学报》2016,13(2):213-222

Although information regarding the initiation processes of debris flows is important for the development of mitigation measures,field data regarding these processes are scarce.We conducted field observations of debris-flow initiation processes in the upper Ichinosawa catchment of the Ohya landslide,central Japan.On 19 June 2012,our videocamera monitoring systems recorded the moment of debris-flow initiation on channel deposits(nine surges) and talus slopes(eight surges).The initiation mechanisms of these surges were classified into three types by analyzing the video images: erosion by the surface flow,movement of deposits as a mass,and upward development of the fluid area.The first type was associated with the progress of surface flow from the upper stream on unsaturated channel deposits.The second type was likely caused by an increase in the pore water pressure associated with the rising in the groundwater level in channel deposits;a continuous water supply from the upper stream by the surface flow might have induced this saturation.The third type was associated with changes in the downstream topography caused by erosion.The flow velocity of most surges was less than 3 m s~(-1) and they usually stopped within 100 m from the initiation point.Surges with abundant pore fluid had a higher flow velocity(about 3- 5 m s~(-1)) and could travel for alonger duration.Our observations indicate that the surface flow plays an important role in the initiation of debris flows on channel deposits and talus slopes.  相似文献   

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating     

Yukio Isozaki  Shinji Yamamoto  Shuhei Sakata  Hideyuki Obayashi  Takafumi Hirata  Ken-ichi Obori  Toshinori Maebayashi  Satoshi Takeshima  Toshikazu Ebisuzaki  Shigenori Maruyama 《地学前缘(英文版)》2018,9(4):1073-1083

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.  相似文献   

Pore-water pressure development in a frozen saline clay under isotropic loading and undrained shearing     

Lyu  Chuangxin  Nishimura  Satoshi  Amiri  Seyed Ali Ghoreishian  Zhu  Feng  Eiksund  Gudmund Reidar  Grimstad  Gustav 《Acta Geotechnica》2021,16(12):3831-3847

Acta Geotechnica - A systematical testing program on frozen Onsøy clay under isotropic loading and undrained shearing at different temperatures...  相似文献   

Molecular and isotopic characteristics of gas hydrate-bound hydrocarbons in southern and central Lake Baikal   总被引：4，自引：4，他引：0  

Akihiro Hachikubo  Oleg Khlystov  Alexey Krylov  Hirotoshi Sakagami  Hirotsugu Minami  Yutaka Nunokawa  Satoshi Yamashita  Nobuo Takahashi  Hitoshi Shoji  Shin’ya Nishio  Masato Kida  Takao Ebinuma  Gennadiy Kalmychkov  Jeffrey Poort 《Geo-Marine Letters》2010,30(3-4):321-329

We investigated the molecular composition (methane, ethane, and propane) and stable isotope composition (methane and ethane) of hydrate-bound gas in sediments of Lake Baikal. Hydrate-bearing sediment cores were retrieved from eight gas seep sites, located in the southern and central Baikal basins. Empirical classification of the methane stable isotopes (δ¹³C and δD) for all the seep sites indicated the dominant microbial origin of methane via methyl-type fermentation; however, a mixture of thermogenic and microbial gases resulted in relatively high methane δ¹³C signatures at two sites where ethane δ¹³C indicated a typical thermogenic origin. At one of the sites in the southern Baikal basin, we found gas hydrates of enclathrated microbial ethane in which ¹³C and deuterium were both highly depleted (mean δ¹³C and δD of –61.6‰ V-PDB and –285.4‰ V-SMOW, respectively). To the best of our knowledge, this is the first report of C₂ δ¹³C–δD classification for hydrate-bound gas in either freshwater or marine environments.  相似文献   

SAR-imaged spiral eddies in Mutsu Bay and their dynamic and kinematic models     

Satoshi Yamaguchi  Hiroshi Kawamura 《Journal of Oceanography》2009,65(4):525-539

A pattern of slick streaks winding into a spiral, known as a spiral eddy, was identified in 5 images taken by the ERS-1/2 synthetic aperture radar (SAR) in Mutsu Bay (Japan); dynamic and kinematic models of these spiral eddies have been proposed. Common characteristics of the five spiral eddies are: 1) an eddy diameter of about 15 km; 2) their location in the western part of the bay; and 3) their cyclonic direction of rotation. Moreover, the wind conditions over the bay were common: prior to acquiring the images, a strong easterly wind continued blowing for more than one day. The wind field on the bay is known to be orographically steered and has strong windstress vorticity, which generates cyclonic circulation. The diameter and location of the circulation simulated with a numerical ocean model corresponded well to those of the identified spiral eddies. Based on these facts, we propose a dynamic model for the movement of a slick streak, and a kinematic model for the formation of a spiral eddy. We have assumed calm air, a microlayer and seawater with a cyclonic circulation in the dynamic model. The balance of forces is established in the microlayer among the frictional force from the seawater, the frictional force from the calm air, the gravitational force, and the Coriolis force. As a result, the velocity vector of the microlayer deflects slightly towards the center of the cyclonic circulation. We have assumed a point source of the microlayer in the kinematic model. The shapes of a slick streak simulated with the models agree well with the identified patterns in the SAR images.  相似文献   

Field survey of the East Java earthquake and tsunami of June 3, 1994     

Yoshinobu Tsuji  Fumihiko Imamura  Hideo Matsutomi  Costas E. Synolakis  Puspito T. Nanang  Jumadi  Satoshi Harada  Se Sub Han  Ken'ichi Arai  Benjamin Cook 《Pure and Applied Geophysics》1995,144(3-4):839-854

A field survey of the June 3, 1994 East Java earthquake tsunami was conducted within three weeks, and the distributions of the seismic intensities, tsunami heights, and human and house damages were surveyed. The seismic intensities on the south coasts of Java and Bali Islands were small for an earthquake with magnitudeM 7.6. The earthquake caused no land damage. About 40 minutes after the main shock, a huge tsunami attacked the coasts, several villages in East Java Province were damaged severely, and 223 persons perished. At Pancer Village about 70 percent of the houses were swept away and 121 persons were killed by the tsunami. The relationship between tsunami heights and distances from the source shows that the Hatori's tsunami magnitude wasm=3, which seems to be larger for the earthquake magnitude. But we should not consider this an extraordinary event because it was pointed out byHatori (1994) that the magnitudes of tsunamis in the Indonesia-Philippine region generally exceed 1–2 grade larger than those of other regions.  相似文献